Full metadata
Title
Modeling the performance and failure of elastomeric coatings under erosive cavitating flows
Description
Finite element simulations modeling the hydrodynamic impact loads subjected to an elastomeric coating were performed to develop an understanding of the performance and failure mechanisms of protective coatings for cavitating environments.
In this work, two major accomplishments were achieved: 1) scaling laws were developed from hydrodynamic principles and numerical simulations to allow conversion of measured distributions of pressure peaks in a cavitating flow to distributions of microscopic impact loadings modeling individual bubble collapse events, and 2) a finite strain, thermo-mechanical material model for polyurea-based elastomers was developed using a logarithmic rate formulation and implemented into an explicit finite element code.
Combining the distribution of microscopic impact loads and finite element modeling, a semi-quantitative predictive framework is created to calculate the energy dissipation within the coating which can further the understanding of temperature induced coating failures.
The influence of coating thickness and elastomer rheology on the dissipation of impact energies experienced in cavitating flows has also been explored.
The logarithmic formulation has many desired features for the polyurea constitutive model, such as objectivity, integrability, and additive decomposition compatibility.
A review and discussion on the kinematics in large deformation, including a comparison between Lagrangian and Eulerian descriptions, are presented to explain the issues in building rate-dependent constitutive models in finite strains.
When comparing the logarithmic rate with other conventional rates in test examples, the logarithmic rate shows a better conservation of objectivity and integrability.
The modeling framework was validated by comparing predictions against temperatures measured within coatings subjected to a cavitating jet.
Both the experiments and models show that the temperatures generated, even under mild flow conditions, raise the coating temperature by a significant amount, suggesting that the failure of these coatings under more aggressive flows is thermally induced.
The models show that thin polyurea coatings synthesized with shorter molecular weight soft segments dissipate significantly less energy per impact and conduct heat more efficiently.
This work represents an important step toward understanding thermally induced failure in elastomers subjected to cavitating flows, which provides a foundation for design and optimization of coatings with enhanced erosion resistance.
In this work, two major accomplishments were achieved: 1) scaling laws were developed from hydrodynamic principles and numerical simulations to allow conversion of measured distributions of pressure peaks in a cavitating flow to distributions of microscopic impact loadings modeling individual bubble collapse events, and 2) a finite strain, thermo-mechanical material model for polyurea-based elastomers was developed using a logarithmic rate formulation and implemented into an explicit finite element code.
Combining the distribution of microscopic impact loads and finite element modeling, a semi-quantitative predictive framework is created to calculate the energy dissipation within the coating which can further the understanding of temperature induced coating failures.
The influence of coating thickness and elastomer rheology on the dissipation of impact energies experienced in cavitating flows has also been explored.
The logarithmic formulation has many desired features for the polyurea constitutive model, such as objectivity, integrability, and additive decomposition compatibility.
A review and discussion on the kinematics in large deformation, including a comparison between Lagrangian and Eulerian descriptions, are presented to explain the issues in building rate-dependent constitutive models in finite strains.
When comparing the logarithmic rate with other conventional rates in test examples, the logarithmic rate shows a better conservation of objectivity and integrability.
The modeling framework was validated by comparing predictions against temperatures measured within coatings subjected to a cavitating jet.
Both the experiments and models show that the temperatures generated, even under mild flow conditions, raise the coating temperature by a significant amount, suggesting that the failure of these coatings under more aggressive flows is thermally induced.
The models show that thin polyurea coatings synthesized with shorter molecular weight soft segments dissipate significantly less energy per impact and conduct heat more efficiently.
This work represents an important step toward understanding thermally induced failure in elastomers subjected to cavitating flows, which provides a foundation for design and optimization of coatings with enhanced erosion resistance.
Date Created
2016
Contributors
- Liao, Xiao (Author)
- Oswald, Jay (Thesis advisor)
- Liu, Yongming (Committee member)
- Jiang, Hanqing (Committee member)
- Rajan, Subramaniam D. (Committee member)
- Platte, Rodrigo (Committee member)
- Arizona State University (Publisher)
Topical Subject
Resource Type
Extent
ix, 91 pages : illustrations (some color)
Language
Copyright Statement
In Copyright
Primary Member of
Peer-reviewed
No
Open Access
No
Handle
https://hdl.handle.net/2286/R.I.40801
Statement of Responsibility
by Xiao Liao
Description Source
Viewed on February 2, 2017
Level of coding
full
Note
Partial requirement for: Ph.D., Arizona State University, 2016
Note type
thesis
Includes bibliographical references (pages 84-91)
Note type
bibliography
Field of study: Mechanical engineering
System Created
- 2016-12-01 07:05:22
System Modified
- 2021-08-30 01:20:23
- 2 years 8 months ago
Additional Formats