ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Displaying 91 - 97 of 97
Filtering by
- Creators: Mobasher, Barzin
- Creators: Abbaszadegan, Morteza
Description
Factors affecting biofilm development, specifically the materials of the pipe, were investigated. Two laboratory scale bioreactor systems were constructed to study biofilm formations: a pipe loop bioreactor with continuous flow at 10.1 liters per minute (LPM), and a tank bioreactor under stagnant conditions with a minimal flow of 0.0095 LPM. The continuous flow bioreactors were constructed using cross-linked polyethylene (PEX), copper, and galvanized steel pipes. The tank bioreactors consisted of glass chambers containing coupons made from the pipe materials, as well as glass microscope slides. Municipality tap water was used in the experimentation, with no nutrients added. Legionella pneumophila was spiked into all the pipe loop bioreactors, and only in one tank bioreactor. Detection of heterotrophic bacteria, coliforms and Legionella using tryptic soy agar (TSA), Brilliance, and buffered yeast charcoal extract (BYCE), respectively. Over ten weeks, biofilms were developed on PEX, copper, and steel, in the pipe loop bioreactors and the tank bioreactors. Heterotrophic bacteria were detected in all systems; however, no coliforms were detected, and Legionella pneumophila was only detected on a coupon in the copper pipe loop bioreactor, as measured by bacterial concentration on test materials. In the tank bioreactors, biofilms developed the most rapidly on PEX, followed by galvanized steel, and finally copper. Out of the four materials, copper had the lowest bacterial growth, which can be ascribed to the bactericidal impact of copper ions on the bacterial cells attaching to the copper surface. After biofilm aging, higher bacterial colonization on copper and accumulation of dead bacterial layer on the surface may act as a protective barrier against copper ions. Bacterial densities in the biofilm reached a high concentration of 1.40 x 105 CFU/cm2 on the PEX pipe loop bioreactor, and 1.05 x 104 CFU/cm2in the PEX coupon in the tank bioreactors. Comparing the turbulent conditions in the pipe loop bioreactors to the stagnant conditions in the tank bioreactor, showed that biofilms formed more rapidly under stagnant conditions, but in larger quantities under turbulent conditions.
ContributorsGreenberg, Samuel Gabe (Author) / Abbaszadegan, Morteza (Thesis advisor) / Alum, Absar (Committee member) / Torres, Cesar (Committee member) / Arizona State University (Publisher)
Created2021
Description
Microalgae offer a unique set of promises and perils for environmental management and sustainable production. Algal blooms are becoming a more frequent phenomenon within water infrastructure. As algae blooms are common, water infrastructure across the world has seen mounting problems associated with algal blooms. Some of these problems include biofouling and release of toxins. Since 1997, Arizona’s Central Arizona Project (CAP) has faced escalating problems associated with the algae diatom Cymbella sp. and the green-algae Cladophora glomerata. In this research study, algae are diagramed within the CAP system, the nutrient and abiotic requirements of the diatom Cymbella sp. are determined, and real-time microbial sensors are deployed along the CAP canals for understanding algae blooms and changes in CAP flow conditions. The following research objectives are met: How can water delivery infrastructure improve algae contamination risks in critical water resources?
To do this research demonstrates that (i) nuisance algae species within the CAP canals are Cymbella sp. and Cladophora glomerata (ii) that the nuisance “rock-snot” diatom Cymbella sp. is not Cymbella mexicana nor is it Cymbella janischii, but rather a novel Cymbella sp.(iii) that in laboratory settings, Cymbella sp. prefers high Phosphorus and low Nitrogen conditions (iv) that the Cymbella sp. bloom happens in the early summer along the CAP canals (v) that the diatom Cymbella sp. can be removed through chemical treatments (vi) that microbial sensors can measure changes in algae composition along the CAP canals (vii) that microbial sensors, water quality parameters, and weather data can be integrated to measure algae blooms within water systems.
ContributorsMeyer, Harrison (Author) / Weiss, Taylor (Thesis advisor) / Neuer, Suzanne (Committee member) / Abbaszadegan, Morteza (Committee member) / Arizona State University (Publisher)
Created2021
Description
The ongoing COVID pandemic has opened the doors for the development of effective surface disinfection technologies. UV technology is one of the most effective technique to be used in combination with different photocatalytic agents such as Titanium Dioxide (TiO2) for microbial inactivation. There are many bacteria and viruses which have the potential to infect humans via surface-oral/inhalation pathway. Thus, it is important to evaluate the effectiveness of these techniques used to inactivate microorganisms to minimize environmental transmission. UV light directly acts on bacteria and viruses by damaging their nucleic acids and protein structures. TiO2 acts as a photocatalyst, generates hydroxyl radicals under UV, leading to enhanced inactivation efficacy. This study focuses on the impact of UVC light at 254 nm wavelength in combination with spray formulations with TiO2 for the inactivation of E. coli (exposure times of 1, 5 and 10 minutes) and bacteriophages P22 (exposure times of 5 and 10 minutes) and MS2 (exposure times of 1 and 5 minutes). This study includes tests that explored the long-lasting impact of spray formulations on non-porous surface. Minimal inactivation of ~ 0.15 log inactivation of E. coli was resulted using TiO¬2 alone but when UV was added to the procedure on average 3 log inactivation was achieved. It was noted that MS2 was found to be more susceptible to UV as compared to P22 due to its higher inactivation rate. The spray formulation homogeneity is a critical factor in consistent microbial inactivation. In addition, the UV intensity of the handheld device is an important factor for total disinfection. However, the combined spray formulation and UV technology is an effective method of surface disinfection.
ContributorsBaxi, Dhatri Kamleshbhai (Author) / Abbaszadegan, Morteza (Thesis advisor) / Fox, Peter (Committee member) / Alum, Absar (Committee member) / Arizona State University (Publisher)
Created2021
Description
Composite materials have gained interest in the aerospace, mechanical and civil engineering industries due to their desirable properties - high specific strength and modulus, and superior resistance to fatigue. Design engineers greatly benefit from a reliable predictive tool that can calculate the deformations, strains, and stresses of composites under uniaxial and multiaxial states of loading including damage and failure predictions. Obtaining this information from (laboratory) experimental testing is costly, time consuming, and sometimes, impractical. On the other hand, numerical modeling of composite materials provides a tool (virtual testing) that can be used as a supplemental and an alternate procedure to obtain data that either cannot be readily obtained via experiments or is not possible with the currently available experimental setup. In this study, a unidirectional composite (Toray T800-F3900) is modeled at the constituent level using repeated unit cells (RUC) so as to obtain homogenized response all the way from the unloaded state up until failure (defined as complete loss of load carrying capacity). The RUC-based model is first calibrated and validated against the principal material direction laboratory tests involving unidirectional loading states. Subsequently, the models are subjected to multi-directional states of loading to generate a point cloud failure data under in-plane and out-of-plane biaxial loading conditions. Failure surfaces thus generated are plotted and compared against analytical failure theories. Results indicate that the developed process and framework can be used to generate a reliable failure prediction procedure that can possibly be used for a variety of composite systems.
ContributorsKatusele, Daniel Mutahwa (Author) / Rajan, Subramaniam (Thesis advisor) / Mobasher, Barzin (Committee member) / Neithalath, Narayanan (Committee member) / Arizona State University (Publisher)
Created2021
Description
Alkali-activated aluminosilicates, commonly known as "geopolymers", are being increasingly studied as a potential replacement for Portland cement. These binders use an alkaline activator, typically alkali silicates, alkali hydroxides or a combination of both along with a silica-and-alumina rich material, such as fly ash or slag, to form a final product with properties comparable to or better than those of ordinary Portland cement. The kinetics of alkali activation is highly dependent on the chemical composition of the binder material and the activator concentration. The influence of binder composition (slag, fly ash or both), different levels of alkalinity, expressed using the ratios of Na2O-to-binders (n) and activator SiO2-to-Na2O ratios (Ms), on the early age behavior in sodium silicate solution (waterglass) activated fly ash-slag blended systems is discussed in this thesis. Optimal binder composition and the n values are selected based on the setting times. Higher activator alkalinity (n value) is required when the amount of slag in the fly ash-slag blended mixtures is reduced. Isothermal calorimetry is performed to evaluate the early age hydration process and to understand the reaction kinetics of the alkali activated systems. The differences in the calorimetric signatures between waterglass activated slag and fly ash-slag blends facilitate an understanding of the impact of the binder composition on the reaction rates. Kinetic modeling is used to quantify the differences in reaction kinetics using the Exponential as well as the Knudsen method. The influence of temperature on the reaction kinetics of activated slag and fly ash-slag blends based on the hydration parameters are discussed. Very high compressive strengths can be obtained both at early ages as well as later ages (more than 70 MPa) with waterglass activated slag mortars. Compressive strength decreases with the increase in the fly ash content. A qualitative evidence of leaching is presented through the electrical conductivity changes in the saturating solution. The impact of leaching and the strength loss is found to be generally higher for the mixtures made using a higher activator Ms and a higher n value. Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) is used to obtain information about the reaction products.
ContributorsChithiraputhiran, Sundara Raman (Author) / Neithalath, Narayanan (Thesis advisor) / Rajan, Subramaniyam D (Committee member) / Mobasher, Barzin (Committee member) / Arizona State University (Publisher)
Created2012
Description
Bacterial biofilms exist on surfaces within pressurized water systems, posing threats to water quality and causing fouling or microbial induced corrosion. Germicidal UV irradiation has shown promise in deactivating planktonic pathogens in water but challenges in delivering light to surfaces where biofilms exist have limited advancement in understanding biofilm response to UV-C light. This dissertation aims to overcome the limitation of delivering UV-C light through use of side-emitting optical fibers (SEOFs), advance capabilities to produce SEOFs and understand if a minimum UV-C irradiance can prevent biofilm formation. Two scalable manufacturing approaches were developed for producing kilometer lengths of thin (≤500-µm) and physically flexible SEOFs. One strategy involved dip-coating amine-functionalized SiO2 nanoparticles (NPs) on bare optical fiber, followed by a coating of UV-C transparent polymer (CyTop). I showed that NPs closer to the surface achieved with higher ionic strength solutions increased side-scattering of UV-C light. This phenomenon was primarily attributed to the interaction between NPs and evanescent wave energy. The second strategy omitted NPs but utilized a post-treatment to the UV-C transparent polymer that increased surface roughness on the outer fiber surface. This modification maintained the physical flexibility of the fiber while promoting side-emission of UV-C light. The side emission was due to the enhancement of refracted light energy. Both methods were successfully scaled up for potential commercial production.
Experimental platforms were created to study biofilm responses to UV light on metal or flexible plastic pipe (1/4” ID) surfaces. Delivering UV-C light via SEOFs with irradiances >8 µW/cm2 inhibited biofilm accumulation. Neither UV-A nor UV-B light inhibited biofilm growth. At very low UV-C irradiance (<3 µW/cm2), biofilms were not inhibited. Functional genomic analysis revealed that biofilms irradiated by insufficient UV-C irradiance upregulated various essential genes related to DNA repair, energy metabolism, quorum sensing, mobility, and EPS synthesis. When net UV-C biofilm inactivation rates exceeded the biofilm growth rate, biofilms were inhibited. Insights gained from this dissertation work shed light on the prospective applications of UV-C technology in addressing biofilm challenges within water infrastructure across multiple sectors, from potable water to healthcare applications.
ContributorsZhao, Zhe (Author) / Westerhoff, Paul (Thesis advisor) / Rittmann, Bruce (Committee member) / Abbaszadegan, Morteza (Committee member) / Álvarez, Pedro (Committee member) / Arizona State University (Publisher)
Created2023
Description
Water quality assessment is essential for maintaining healthy ecosystems and protecting human health. Data interrogation and exploratory data analysis techniques are used to analyze the spatial and temporal variability of water quality parameters, identifying correlations, and to better understand the factors that impacts microbial and chemical quality of water. The seasonal dynamics of microbiome in surface waters were investigated to identify the factors driving these dynamics. Initial investigation analyzed two decades of regional water quality data from 20 various locations in Central Arizona, USA. Leveraging advanced data science techniques, the study uncovered correlations between crucial parameters, including dissolved organic carbon (DOC), ultraviolet absorbance (UVA), and specific ultraviolet absorbance (SUVA). These findings provide foundational insights into the dynamic of overall water quality. A comprehensive 12-month surface water sample collection and study was conducted to investigate potential bias in bacterial detection using EPA approved Membrane Filtration (MF) technique. The results underscore that while MF excels in recovering bacteria of public health significance, it exhibits biases, particularly against small and spore-forming bacteria and Archaea, such as Bacilli, Mollicutes, Methylacidiphilae, and Parvarchaea. This emphasizes the importance of complementing standard microbiology approaches to mitigate technological biases and enhance the accuracy of microbial water quality testing, especially for emerging pathogens. Furthermore, a complementary study of microbial dynamics within a model drinking water distribution systems (DWDSs) using treated water from the same source water as the above study. The influence of pipe material and water temperature on the microbiome and trace element composition was investigated. The research unveiled a preferential link between pipe material and trace elements, with water temperature significantly impacting the microbiome to a higher degree than the chemical composition of water. Notably, Legionellaceae and Mycobacteriaceae were found to be prevalent in warmer waters, highlighting the substantial influence of water temperature on the microbiome, surpassing that of pipe material. These studies provide comprehensive insights into the spatial and temporal variability of water quality parameters. Analyzing microbial data in depth is crucial in detecting bacterial species within a monitoring program for adjusting operational conditions to reduce the presence of microbial pathogens and enhance the quality of drinking water.
ContributorsAloraini, Saleh (Author) / Abbaszadegan, Morteza (Thesis advisor) / Fox, Peter (Committee member) / Perreault, Francois (Committee member) / Alum, Absar (Committee member) / Arizona State University (Publisher)
Created2023