Matching Items (15)
Filtering by
- Member of: ASU Electronic Theses and Dissertations
- Status: Published
Description
Bioconversion of lignocellulosic sugars is often suboptimal due to global regulatory mechanisms such as carbon catabolite repression and incomplete/inefficient metabolic pathways. While conventional bioprocessing strategies for metabolic engineering have predominantly focused on a single engineered strain, the alternative development of synthetic microbial communities facilitates the execution of complex metabolic tasks by exploiting unique community features (i.e., modularity, division of labor, and facile tunability). In this dissertation, these features are leveraged to develop a suite of generalizable strategies and transformative technologies for engineering Escherichia coli coculture systems to more efficiently utilize lignocellulosic sugar mixtures. This was achieved by rationally pairing and systematically engineering catabolically-orthogonal Escherichia coli sugar specialists. Coculture systems were systematically engineered, as derived from either wild-type Escherichia coli W, ethanologenic LY180, lactogenic TG114 or succinogenic KJ122. Net catabolic activities were then readily balanced by simple tuning of the inoculum ratio between sugar specialists, ultimately enabling improved co-utilization (98% of 100 g L-1 total sugars) of glucose-xylose mixtures (2:1 by mass) under simple batch fermentation conditions. We next extended this strategy to a coculture-coproduction system capable of capturing and fixing CO2 evolved during biofuel production through inter-strain metabolic cooperation. Holistically, this work contributes to an improved understanding of the dynamic behavior of synthetic microbial consortia as enhanced bioproduction platforms and carbon conservation strategy for renewable fuels and chemicals from non-food carbohydrates
ContributorsFlores, Andrew David (Author) / Nielsen, David R (Thesis advisor) / Wang, Xuan (Thesis advisor) / Varman, Arul M (Committee member) / Nannenga, Brent (Committee member) / Wheeldon, Ian (Committee member) / Arizona State University (Publisher)
Created2021
Description
Alkanolamines are useful as building blocks for a variety of applications, ranging from medical applications such as drug and gene delivery. In this work, Escherichia coli was investigated as a viable candidate for the production of 5-amino-1-pentanol (5-AP). Taking advantage of the existing L-lysine degradation pathway, a novel route to 5-AP was constructed by co-expressing the genes cadA (encoding lysine decarboxylase, responsible for the conversion of L-lysine to cadaverine) and patA (encoding putrescine aminotransferase, responsible for the conversion of cadaverine to 5-amino-1-pentanal), followed by the endogenous reduction of 5-amino-pentanal (5-APL) to 5-AP. To avoid the competing conversion of 5-APL to 5-amino-1-pentanoate and avoid accumulation of byproduct 1-Δ-piperideine, further host engineering was performed to delete the gene patD also known as prr (encoding 5-amino-pentanal dehydrogenase). Flask scale fermentation experiments in minimal medium of the newly constructed pathway was conducted where 62.6 mg/L 5-AP was observed to be produced. It was hypothesized that 5-AP production could be boosted by optimizing production medium to M10 media. However, change in the culture medium resulted in the production of just 51 mg/L 5-AP. Shifts observed in HPLC chromatogram peaks made it difficult to conclude exact titers of 5-AP and can be further improved by exploring different analysis methods and optimization of the method currently in place.
ContributorsBrookhouser, Brendan (Author) / Nielsen, David R (Thesis advisor) / Tonkovich, Anna L (Committee member) / Varman, Arul M (Committee member) / Arizona State University (Publisher)
Created2022
Description
Mutation is the source of heritable variation of genotype and phenotype, on which selection may act. Mutation rates describe a fundamental parameter of living things, which influence the rate at which evolution may occur, from viral pathogens to human crops and even to aging cells and the emergence of cancer. An understanding of the variables which impact mutation rates and their estimation is necessary to place mutation rate estimates in their proper contexts. To better understand mutation rate estimates, this research investigates the impact of temperature upon transcription rate error estimates; the impact of growing cells in liquid culture vs. on agar plates; the impact of many in vitro variables upon the estimation of deoxyribonucleic acid (DNA) mutation rates from a single sample; and the mutational hazard induced by expressing clustered regularly interspaced short palindromic repeat (CRISPR) proteins in yeast. This research finds that many of the variables tested did not significantly alter the estimation of mutation rates, strengthening the claims of previous mutation rate estimates across the tree of life by diverse experimental approaches. However, it is clear that sonication is a mutagen of DNA, part of an effort which has reduced the sequencing error rate of circle-seq by over 1,000-fold. This research also demonstrates that growth in liquid culture modestly skews the mutation spectrum of MMR- Escherichia coli, though it does not significantly impact the overall mutation rate. Finally, this research demonstrates a modest mutational hazard of expressing Cas9 and similar CRISPR proteins in yeast cells at an un-targeted genomic locus, though it is possible the indel rate has been increased by an order of magnitude.
ContributorsBaehr, Stephan (Author) / Lynch, Michael (Thesis advisor) / Geiler-Samerotte, Kerry (Committee member) / Mangone, Marco (Committee member) / Wilson, Melissa (Committee member) / Arizona State University (Publisher)
Created2023
Description
Viruses are the most abundant biological entities on Earth, infecting all types of cellular organisms. Yet less than 1% of the virosphere on our planet has been characterized to date. Viruses are both an important driver of bacterial evolution and have significant implications for human health, therefore understanding the relative contributions of various evolutionary forces in shaping their genomic landscapes is of critical importance both mechanistically as well as clinically. In my thesis I use computational genomic approaches to gain novel insights into bacteriophage and human cytomegalovirus evolution. In my first two chapters and associated appendices I characterized the complete genomes of the Cluster P bacteriophage Phegasus and Cluster DR bacteriophage BiggityBass, whose isolation hosts were Mycobacterium smegmatis mc²155 and Gordonia terrae CAG3, respectively. I also determined the bacteriophages' phylogenetic placement and computationally inferred their putative host ranges. For my fourth chapter I assessed the performance of several of these computational host range prediction tools using a dataset of bacteriophages whose host ranges have been experimentally validated. Finally, in my fifth chapter I reviewed the key parameters for developing an evolutionary baseline model of another virus, human cytomegalovirus.
ContributorsHowell, Abigail Ann (Author) / Pfeifer, Susanne P (Thesis advisor) / Jensen, Jeffrey (Committee member) / Snyder-Mackler, Noah (Committee member) / Geiler-Samerotte, Kerry (Committee member) / Arizona State University (Publisher)
Created2023
Description
Lignocellulose, the major structural component of plant biomass, represents arenewable substrate of enormous biotechnological value. Microbial production of
chemicals from lignocellulosic biomass is an attractive alternative to chemical synthesis.
However, to create industrially competitive strains to efficiently convert lignocellulose to
high-value chemicals, current challenges must be addressed. Redox constraints, allosteric
regulation, and transport-related limitations are important bottlenecks limiting the
commercial production of renewable chemicals from lignocellulose. Advances in
metabolic engineering techniques have enabled researchers to engineer microbial strains
that overcome some of these challenges but new approaches that facilitate the
commercial viability of lignocellulose valorization are needed. Biological systems are
complex with a plethora of regulatory systems that must be carefully modulated to
efficiently produce and excrete the desired metabolites. In this work, I explore metabolic
engineering strategies to address some of the biological constraints limiting
bioproduction such as redox, allosteric, and transport constraints to facilitate cost-effective
lignocellulose bioconversion.
ContributorsOnyeabor, Moses Ekenedilichukwu (Author) / Wang, Xuan (Thesis advisor) / Varman, Arul M (Committee member) / Nannenga, Brent (Committee member) / Nielsen, David R (Committee member) / Geiler-Samerotte, Kerry (Committee member) / Arizona State University (Publisher)
Created2023
Description
Amino acids and related targets are typically produced by well-characterized heterotrophs including Corynebacterium glutamicum and Escherichia coli. Recent efforts have sought to supplant these sugar-intensive processes through the metabolic engineering of cyanobacteria, which instead can directly utilize atmospheric carbon dioxide (CO2) and sunlight. One of the most promising among recently discovered photoautotrophic strains is Synechococcus elongatus UTEX 2973 (hereafter UTEX 2973), which has been reported to have doubling times as low as 1.5 hours. While encouraging, there are still major challenges preventing the widespread industrial acceptance of engineered cyanobacteria, chief among them is the scarcity of genetic tools and parts with which to engineer production strains. Here, UTEX 2973 was engineered to overproduce L-lysine through the heterologous expression of feedback-resistant copies of aspartokinase lysC and the L-lysine exporter ybjE from Escherichia coli, as aided by the characterization of novel combinations of genetic parts and expression sites. At maximum, using a plasmid-based expression system, a L-lysine titer of 556 ± 62.3 mg/L was attained after 120 hours, surpassing a prior report of photoautotrophic L-lysine bioproduction. Modular extension of the pathway then led to the novel photosynthetic production of the corresponding diamine cadaverine (55.3 ± 6.7 mg/L by 96 hours) and dicarboxylate glutarate (67.5 ± 2.2 mg/L by 96 hours). Lastly, mass transfer experiments were carried out to determine if the solubility of CO2 in and its rate of mass transfer to BG-11 media could be improved by supplementing it with various amines, including cadaverine. Ultimately, however, cyanobacteria grown in the presence of all tested amines was worse than in BG-11 alone, demonstrating the need for additional tolerance engineering to successfully implement this strategy.
ContributorsDookeran, Zachary Anthony (Author) / Nielsen, David R (Thesis advisor) / Wang, Xuan (Committee member) / Nannenga, Brent L (Committee member) / Varman, Arul M (Committee member) / Peebles, Christie AM (Committee member) / Arizona State University (Publisher)
Created2022
Description
Lignin is a naturally abundant source of aromatic carbon but is largely underutilized inindustry because it is difficult to decompose. Recent research activity has targeted the
development of a biological platform for the conversion of lignin and lignin-derived
feedstock. Corynebacterium glutamicum is a standout candidate for the bacterial
depolymerization and assimilation of lignin because of its performance as an industrial
producer of amino acids, resistance to aromatic compounds in lignin, and low
extracellular protease activity. Under the current study, nine experimental strains of C.
glutamicum were engineered with sequencing-confirmed plasmids to overexpress and
secrete lignin-modifying enzymes with the eventual goal of using lignin as raw feed for
the sustainable production of valuable chemicals. Within the study, laccase and
peroxidase activity were discovered to be decreased in C. glutamicum culture media. For
laccase the decrease reached statistical significance, with an activity of about 10.9 U/L
observed in water but only about 7.56 U/L and 7.42 U/L in fresh and spent BHI media,
respectively, despite the same amounts of enzyme being added. Hypothesized reasons for
this inhibitory effect are discussed here, but further work is needed to identify causative
factors and realize the potential of C. glutamicum for waste biomass valorization.
ContributorsEllis, Dylan Scott (Author) / Varman, Arul M (Thesis advisor) / Lammers, Peter J (Committee member) / Long, Timothy E (Committee member) / Arizona State University (Publisher)
Created2022
Description
The objective of this research was to develop Aluminophosphate-five (AlPO4-5, AFI) zeolite adsorbents for efficient oxygen removal from a process stream to support an on-going Department of Energy (DOE) project on solar energy storage. A molecular simulation study predicted that substituted AlPO4-5 zeolite can adsorb O2 through a weak chemical bond at ambient temperature. Substituted AlPO4-5 zeolite was successfully synthesized via hydrothermal crystallization by following carefully designed procedures to tailor the zeolite for efficient O2 adsorption. Synthesized AlPO4-5 in this work included Sn/AlPO-5, Mo/AlPO-5, Pd/AlPO-5, Si/AlPO-5, Mn/AlPO-5, Ce/AlPO-5, Fe/AlPO-5, CuCe/AlPO-5, and MnSnSi/AlPO-5. While not all zeolite samples synthesized were fully characterized, selected zeolite samples were characterized by powder x-ray diffraction (XRD) for crystal structure confirmation and phase identification, and nitrogen adsorption for their pore textural properties. The Brunauer-Emmett-Teller (BET) specific surface area and pore size distribution were between 172 m2 /g - 306 m2 /g and 6Å - 9Å, respectively, for most of the zeolites synthesized. Samples of great interest to this project such as Sn/AlPO-5, Mo/AlPO-5 and MnSnSi/AlPO-5 were also characterized using x-ray photoelectron spectroscopy (XPS) and energy-dispersive x-ray spectroscopy (EDS) for elemental analysis, scanning electron microscopy (SEM) for morphology and particle size estimation, and electron paramagnetic resonance (EPR) for nature of adsorbed oxygen. Oxygen and nitrogen adsorption experiments were carried out in a 3-Flex adsorption apparatus (Micrometrics) at various temperatures (primarily at 25℃) to determine the adsorption properties of these zeolite samples as potential adsorbents for oxygen/nitrogen separation. Experiments showed that some of the zeolite samples adsorb little-to-no oxygen and nitrogen at 25℃, while other zeolites such as Sn/AlPO-5, Mo/AlPO-5, and MnSnSi/AlPO-5 adsorb decent but inconsistent amounts of oxygen with the highest observed values of about 0.47 mmol/ g, 0.56 mmol/g, and 0.84 mmol/ g respectively. The inconsistency in adsorption is currently attributed to non-uniform doping of the zeolites, and these findings validate that some substituted AlPO4-5 zeolites are promising adsorbents. However, more investigations are needed to verify the causes of this inconsistency to develop a successful AlPO4-5 zeolite-based adsorbent for oxygen/nitrogen separation.
ContributorsBuyinza, Allan Smith (Author) / Deng, Shuguang (Thesis advisor) / Varman, Arul M (Committee member) / Jin, Kailong (Committee member) / Arizona State University (Publisher)
Created2021
Description
Phenolic polymers like polyphenols and polyphenylenes have several industrial applications including electrical insulation, specialty membranes, and packings but are typically synthesized under harsh reaction conditions and require hazardous chemicals like formaldehyde. Hydroxycinnamic acids, such as p-coumaric acid (p-CA), are aromatic derivatives of lignin hydrolysates, an underutilized and promising renewable feedstock for production of phenolics and phenolic polymers. Recently a strain of Corynebacterium glutamicum has been created by the Joint BioEnergy Institute (JBEI) which expresses phenolic acid decarboxylase (PAD), an enzyme which catalyzes the reaction of p-CA to 4-vinylphenol (4-VP). Further, a deletion of the phdA gene prevents assimilation of p-CA, thereby increasing 4-VP yield. 4-VP is a substituted phenol which can be polymerized to poly(4-vinylphenol) (PVP) in the presence of ligninolytic enzymes like laccases or peroxidases. This work explores in situ polymerization of 4-VP to PVP by supplementing ligninolytic enzymes during fermentation. Cultured in the presence of p-CA, the engineered C. glutamicum strain achieved a maximum 4-VP yield of 45.2%, 57.9%, and 34.7% when fed 2, 5, and 10 g/L p-CA, respectively. Low yield can be attributed to photodegradation of 4-VP and accumulation of the native laccase present in C. glutamicum which may form only dimers and trimers. To further investigate carbon utilization in the cell, the engineered strain was plasmid cured thus removing the PAD enzyme and fermentations for 13C pathway analysis was performed. Polymerization experiments were performed and the polymer was characterized using GPC.
ContributorsMcKeown, Haley Nicole (Author) / Varman, Arul M (Thesis advisor) / Nannenga, Brent (Committee member) / Nielsen, David (Committee member) / Arizona State University (Publisher)
Created2024
Description
Phenotypic evolution is of great significance within biology, as it is the culmination of the influence of key evolutionary factors on the expression of genotypes. Deeper studies of the fundamental components, such as fitness effects of mutations and genetic variance within a population, allow one to predict the evolutionary trajectory of phenotypic evolution. In this regard, how much the change in mutational variance and the ongoing natural selection influence the rate of phenotypic evolution has yet to be fully understood. Therefore, this study measured mutational variances and the increasing rate of genetic variance during the experimental evolution of Escherichia coli populations, focusing on two growth-related traits, the populational maximum growth rate and carrying capacity. Mutational variances were measured by mutation-accumulation experiments, which allowed for the analysis of the effects of spontaneous mutations on growth-related traits in the absence of selection. This analysis revealed that some evolved populations developed a higher mutational variance for growth-related traits. Further investigation showed that most evolved populations have also developed a greater mutational effect, which could explain the increase in mutational variance. Finally, the genetic variances for most evolved populations are lower than expected in the absence of selection, and the involvement of either stabilizing or directional selection is evident. Future experiments with a larger sample size of experimentally evolved populations, as well as more intermediate timepoints during experimental evolution, may provide further insight regarding the complexities of the evolutionary outcomes of these traits.
ContributorsGonzales, Jadon (Author) / Lynch, Michael (Thesis advisor) / Geiler-Samerotte, Kerry (Committee member) / Ho, Wei-Chin (Committee member) / Arizona State University (Publisher)
Created2023