Specification of PM_2.5 transmission characteristics is important for pollution control and policymaking. We apply higher-order organization of complex networks to identify major potential PM_2.5 contributors and PM_2.5 transport pathways of a network of 189 cities in China. The network we create in this paper consists of major cities in China and contains information on meteorological conditions of wind speed and wind direction, data on geographic distance, mountains, and PM_2.5 concentrations. We aim to reveal PM_2.5 mobility between cities in China. Two major conclusions are revealed through motif analysis of complex networks. First, major potential PM_2.5 pollution contributors are identified for each cluster by one motif, which reflects movements from source to target. Second, transport pathways of PM_2.5 are revealed by another motif, which reflects transmission routes. To our knowledge, this is the first work to apply higher-order network analysis to study PM_2.5 transport.

To investigate dual-process persuasion theories in the context of group decision making, we studied low and high need-for-cognition (NFC) participants within a mock trial study. Participants considered plaintiff and defense expert scientific testimony that varied in argument strength. All participants heard a cross-examination of the experts focusing on peripheral information (e.g., credentials) about the expert, but half were randomly assigned to also hear central information highlighting flaws in the expert’s message (e.g., quality of the research presented by the expert). Participants rendered pre- and post-group-deliberation verdicts, which were considered “scientifically accurate” if the verdicts reflected the strong (versus weak) expert message, and “scientifically inaccurate” if they reflected the weak (versus strong) expert message. For individual participants, we replicated studies testing classic persuasion theories: Factors promoting reliance on central information (i.e., central cross-examination, high NFC) improved verdict accuracy because they sensitized individual participants to the quality discrepancy between the experts’ messages. Interestingly, however, at the group level, the more that scientifically accurate mock jurors discussed peripheral (versus central) information about the experts, the more likely their group was to reach the scientifically accurate verdict. When participants were arguing for the scientifically accurate verdict consistent with the strong expert message, peripheral comments increased their persuasiveness, which made the group more likely to reach the more scientifically accurate verdict.

In order to determine the feasibility of utilizing novel rexinoids for chemotherapeutics and as potential treatments for neurological conditions, we undertook an assessment of the side effect profile of select rexinoid X receptor (RXR) analogs that we reported previously. We assessed pharmacokinetic profiles, lipid and thyroid-stimulating hormone (TSH) levels in rats, and cell culture activity of rexinoids in sterol regulatory element-binding protein (SREBP) induction and thyroid hormone inhibition assays. We also performed RNA sequencing of the brain tissues of rats that had been dosed with the compounds. We show here for the first time that potent rexinoid activity can be uncoupled from drastic lipid changes and thyroid axis variations, and we propose that rexinoids can be developed with improved side effect profiles than the parent compound, bexarotene (1).

Given species inventories of all sites in a planning area, integer programming or heuristic algorithms can prioritize sites in terms of the site's complementary value, that is, the ability of the site to complement (add unrepresented species to) other sites prioritized for conservation. The utility of these procedures is limited because distributions of species are typically available only as coarse atlases or range maps, whereas conservation planners need to prioritize relatively small sites. If such coarse-resolution information can be used to identify small sites that efficiently represent species (i.e., downscaled), then such data can be useful for conservation planning. We develop and test a new type of surrogate for biodiversity, which we call downscaled complementarity. In this approach, complementarity values from large cells are downscaled to small cells, using statistical methods or simple map overlays. We illustrate our approach for birds in Spain by building models at coarse scale (50 × 50 km atlas of European birds, and global range maps of birds interpreted at the same 50 × 50 km grid size), using this model to predict complementary value for 10 × 10 km cells in Spain, and testing how well-prioritized cells represented bird distributions in an independent bird atlas of those 10 × 10 km cells. Downscaled complementarity was about 63–77% as effective as having full knowledge of the 10-km atlas data in its ability to improve on random selection of sites. Downscaled complementarity has relatively low data acquisition cost and meets representation goals well compared with other surrogates currently in use. Our study justifies additional tests to determine whether downscaled complementarity is an effective surrogate for other regions and taxa, and at spatial resolution finer than 10 × 10 km cells. Until such tests have been completed, we caution against assuming that any surrogate can reliably prioritize sites for species representation.

Lack of biodiversity data is a major impediment to prioritizing sites for species representation. Because comprehensive species data are not available in any planning area, planners often use surrogates (such as vegetation communities, or mapped occurrences of a well-inventoried taxon) to prioritize sites. We propose and demonstrate the effectiveness of predicted rarity-weighted richness (PRWR) as a surrogate in situations where species inventories may be available for a portion of the planning area. Use of PRWR as a surrogate involves several steps. First, rarity-weighted richness (RWR) is calculated from species inventories for a q% subset of sites. Then random forest models are used to model RWR as a function of freely available environmental variables for that q% subset. This function is then used to calculate PRWR for all sites (including those for which no species inventories are available), and PRWR is used to prioritize all sites. We tested PRWR on plant and bird datasets, using the species accumulation index to measure efficiency of PRWR. Sites with the highest PRWR represented species with median efficiency of 56% (range 32%–77% across six datasets) when q = 20%, and with median efficiency of 39% (range 20%–63%) when q = 10%. An efficiency of 56% means that selecting sites in order of PRWR rank was 56% as effective as having full knowledge of species distributions in PRWR's ability to improve on the number of species represented in the same number of randomly selected sites. Our results suggest that PRWR may be able to help prioritize sites to represent species if a planner has species inventories for 10%–20% of the sites in the planning area.

MALDI-TOF MS profiling has been shown to be a rapid and reliable method to characterize pure cultures of bacteria. Currently, there is keen interest in using this technique to identify bacteria in mixtures. Promising results have been reported with two- or three-isolate model systems using biomarker-based approaches. In this work, we applied MALDI-TOF MS-based methods to a more complex model mixture containing six bacteria. We employed: 1) a biomarker-based approach that has previously been shown to be useful in identification of individual bacteria in pure cultures and simple mixtures and 2) a similarity coefficient-based approach that is routinely and nearly exclusively applied to identification of individual bacteria in pure cultures. Both strategies were developed and evaluated using blind-coded mixtures. With regard to the biomarker-based approach, results showed that most peaks in mixture spectra could be assigned to those found in spectra of each component bacterium; however, peaks shared by two isolates as well as peaks that could not be assigned to any individual component isolate were observed. For two-isolate blind-coded samples, bacteria were correctly identified using both similarity coefficient- and biomarker-based strategies, while for blind-coded samples containing more than two isolates, bacteria were more effectively identified using a biomarker-based strategy.

Students often self-identify as visual learners and prefer to engage with a topic in an active, hands-on way. Indeed, much research has shown that students who actively engage with the material and are engrossed in the topics retain concepts better than students who are passive receivers of information. However, much of learning life science concepts is still driven by books and static pictures. One concept students have a hard time grasping is how a linear chain of amino acids folds to becomes a 3D protein structure. Adding three dimensional activities to the topic of protein structure and function should allow for a deeper understanding of the primary, secondary, tertiary, and quaternary structure of proteins and how proteins function in a cell. Here, I review protein folding activities and describe using Apps and 3D visualization to enhance student understanding of protein structure.

I teach an upper-level writing course, Genes, Race, Gender, and Society, designed for Life Science majors, in which I utilize a case study to expose students to ethical ways of thinking. Students first work through the topical case study and then are challenged to rethink their responses through the lenses of ethics, taking into account different ethical frameworks. Students then develop their own case study, integrating ethical components. I want to expose my students to this way of thinking because I see technology being driven by the Jurassic Park phenomenon, “Your scientists were so preoccupied with whether or not they could, they didn’t stop to think if they should,” and want future physicians grounded in a sense of how their actions relate to the greater good.

We used the Affymetrix® Genome-Wide Human SNP Array 6.0 to identify heterospecific markers and compare copy number and structural genomic variation between humans and rhesus macaques. Over 200,000 human copy number variation (CNV) probes were mapped to a Chinese and an Indian rhesus macaque sample. Observed genomic rearrangements and synteny were in agreement with the results of a previously published genomic comparison between humans and rhesus macaques. Comparisons between each of the two rhesus macaques and humans yielded 206 regions with copy numbers that differed by at least two fold in the Indian rhesus macaque and human, 32 in the Chinese rhesus macaque and human, and 147 in both rhesus macaques. The detailed genomic map and preliminary CNV data are useful for better understanding genetic variation in rhesus macaques, identifying derived changes in human CNVs that may have evolved by selection, and determining the suitability of rhesus macaques as human models for particular biomedical studies.

Aquatic vertebrates that emerge onto land to spawn, feed, or evade aquatic predators must return to the water to avoid dehydration or asphyxiation. How do such aquatic organisms determine their location on land? Do particular behaviors facilitate a safe return to the aquatic realm? In this study, we asked: will fully-aquatic mosquitofish (Gambusia affinis) stranded on a slope modulate locomotor behavior according to body position to facilitate movement back into the water? To address this question, mosquitofish (n = 53) were placed in four positions relative to an artificial slope (30° inclination) and their responses to stranding were recorded, categorized, and quantified.

We found that mosquitofish may remain immobile for up to three minutes after being stranded and then initiate either a “roll” or a “leap”. During a roll, mass is destabilized to trigger a downslope tumble; during a leap, the fish jumps up, above the substrate. When mosquitofish are oriented with the long axis of the body at 90° to the slope, they almost always (97%) initiate a roll. A roll is an energetically inexpensive way to move back into the water from a cross-slope body orientation because potential energy is converted back into kinetic energy. When placed with their heads toward the apex of the slope, most mosquitofish (>50%) produce a tail-flip jump to leap into ballistic flight. Because a tail-flip generates a caudually-oriented flight trajectory, this locomotor movement will effectively propel a fish downhill when the head is oriented up-slope. However, because the mass of the body is elevated against gravity, leaps require more mechanical work than rolls. We suggest that mosquitofish use the otolith-vestibular system to sense body position and generate a behavior that is “matched” to their orientation on a slope, thereby increasing the probability of a safe return to the water, relative to the energy expended.