Matching Items (151)
Description
Recent research has confirmed and revealed many physical and mental benefits of yoga. The practice of yoga has spread throughout the western world, where it is widely used for the purpose of exercise and fitness. Due to its rise in popularity, there is a need for research regarding the energy expenditure required for different types of yoga. The majority of the literature cites yoga as being an effective exercise for light intensity activity, but there are not as many studies attempting to determine if there are postures and sequences that can meet the requirements for moderate physical activity. In addition, there is a need to validate mobile devices with which to measure energy expenditure (EE) that are compatible with the dynamic movements that occur during yoga. The purpose of this study was to measure energy expenditure of twenty-two yoga practitioners of varying experience during a 30-minute Vinyasa flow yoga practice and from this data collection determine: if an ashtanga-based vinyasa yoga class meets the criteria for moderate intensity physical activity, the reliability between the Actigraph and Oxycon Mobile and the validity of an Actigraph GT3X device worn on the hip in estimating energy expenditure for ashtanga-based vinyasa flow yoga. The Actigraph GT3X and the Oxycon mobile were used to measure energy expenditure. Mean values for energy expenditure recorded by the Oxycon and Actigraph were 3.19 ± 0.42 METs and 1.16 ± 0.23 METs respectively, exhibiting a significant difference in data collection. There was no correlation between the values recorded by the two devices, indicating that the Actigraph was not consistent with the Oxycon Mobile (previously validated for measurement of EE). Results of this study indicate that this Vinyasa flow yoga sequence does satisfy the criteria for moderate intensity physical activity as defined by ACSM with an average EE of 3.19 ± 0.42 METs, and that the Actigraph GT3X is not an accurate device for measurement of EE for yoga.
ContributorsHand, Lindsay Gabrielle (Author) / Huberty, Jennifer (Thesis director) / Buman, Matthew (Committee member) / School of Nutrition and Health Promotion (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
Objective: To investigate current HCP stillbirth aftercare practices and use findings to inform suggestions for stillbirth aftercare guidelines. Study Design: Participants (n=18) were HCPs (MDs, DOs, or NPs) in the field of Obstetrics and Gynecology or Maternal Fetal Medicine. Focus groups and surveys were conducted. A phenomenological approach was used to explore and understand current stillbirth aftercare practices and thoughts about protocols for stillbirth aftercare. Descriptive statistics were used to analyze demographics of participants and prevalence of references to stillbirth aftercare topics. Results: Sixteen obstetric HCPs (medical doctors and nurse practitioners in the fields of obstetrics and gynecology and/or maternal and fetal medicine) participated in Focus Groups and two obstetric HCPs alternatively completed surveys. Current stillbirth aftercare practices and perceptions related to stillbirth aftercare protocols and guidelines were clustered around the following themes: recommendations made to mothers after stillbirth, subsequent pregnancy care, perceptions and use of protocols for stillbirth aftercare, and responsibilities of nurses and nurse practitioners after stillbirth. Conclusion: Findings were used to develop a list of stillbirth aftercare practice suggestions and may be used to help design future research related to HCPs' stillbirth aftercare practices and the need for training on existing guidelines and development of further protocols or guidelines.
ContributorsMartinez, Lauren Ann (Author) / Huberty, Jennifer (Thesis director) / Coursen, Cristi (Committee member) / Leiferman, Jennifer (Committee member) / School of Nutrition and Health Promotion (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
In injection molded plastic parts, knit lines occur where opposing streams of material fuse together while the mold cavity fills. When parts with knit lines experience external loading, the knit lines cause areas of mechanical weakness. This weakness is especially drastic in fiber-reinforced polymers due to an unfavorable orientation of fibers at the knit line. A possible way to reduce the impact of knit lines is to incorporate overflow tabs into the mold design. An overflow tab is a chamber attached to the mold cavity that provides an extra space for the end of material flow to occur. Research shows that overflow tabs improve the fiber orientation at the knit line, resulting in increased mechanical strength. The goal of this study is to utilize overflow tabs to optimize the knit line strength of nylon 6-6 that is 30% carbon fiber reinforced. In this project, an initial overflow tab is first designed. Then four modifications are made to the tab design, each altering a separate variable while holding the others constant. The design changes explored for the tab in this project include adding radii to the inlet, shifting the inlet location, increasing the inlet cross-sectional area by 50%, and increasing the tab chamber volume by 50%. Specimens were molded using the initial tab design and the modified tab designs. Testing for this experiment consists of three specimens of each type for three-point bending tests, and five specimens of each type for tensile tests. The material properties analyzed are the flexural modulus, flexural strength, tensile modulus, and tensile strength. From the testing, the tab with the 50% increased volume consistently yielded the highest results and showed large improvement from the initial tab design. However, the other three tab modifications either showed negative change or slight improvement from the initial tab design. Based on the results of this study, the overflow tab volume is the most beneficial design parameter to adjust.
ContributorsJones, Justin Michael (Author) / Adams, James (Thesis director) / Wamsley, Steven (Committee member) / Computer Science and Engineering Program (Contributor) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
The purpose of this honors project is to analyze the difference between different powder separation techniques, and their suitability for my capstone project – ‘Effect of Powder Reuse on DMLS (Direct Metal Laser Sintering) Product Integrity’. Due to the nature of my capstone project, my group needs to characterize foreign contaminants in IN 718 (Ni-based superalloy) powder with a mean diameter around 40um. In order to clearly analyze the contaminants and recycle useful IN 718 powders, powder separation is favorable since the filtered samples will be much easier to characterize rather than inspect all the powders at once under microscope. By conducting literature review, I found that powder separation is commonly used in Geology, and Chemistry department. To screen which combination of techniques could be the best for my project, I have consulted several research specialists, obtained adequate knowledge about powder separation. Accordingly, I will summarize the pros and cons of each method with regard the specific project that I am working on, and further explore the impacts of each method under economical, societal, and environmental considerations. Several powder separation techniques will be discussed in details in the following sections, including water elutriation, settling column, magnetic separation and centrifugation. In addition to these methods, sieving, water tabling and panning will be briefly introduced. After detailed comparison, I found that water elutriation is the most efficient way to purity IN718 powder for reuse purpose, and recovery rate is as high as 70%, which could result in a significant reduction in the manufacturing cost for Honeywell since currently Honeywell only use virgin powders to build parts, and 90% of the leftover powders are discarded.
ContributorsLuo, Zheyu (Author) / Adams, James (Thesis director) / Tasooji, Amaneh (Committee member) / Materials Science and Engineering Program (Contributor) / School of Sustainability (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Honeywell is currently extending the reach of additive manufacturing (AM) in its product line and expects to produce as much as 40% of its inventory through AM in five years. Additive manufacturing itself is expected to grow into a $3.1 billion dollar industry in the next 5 to 10 years. Reusing IN 718 powder, a nickel-based super alloy metal powder, is an ideal option to reduce costs as well as reduce waste because it can be used with additive manufacturing, but the main obstacles are lack of procedure standardization and product quality assurances from this process. The goal of the capstone project, "Effect of Powder Reuse on DMLS (Direct Metal Laser Sintering) Product Integrity," is to create a powder characterization protocol in order to determine if the IN 718 powder can be reused and what effect the IN 718 reused powder has on the mechanical properties of the products Honeywell fabricates. To provide context and impact of this capstone project, this paper serves to identify the benefits of AM for Honeywell and the cost effectiveness of reusing the powder versus using virgin powder every time. It was found that Honeywell's investment in AM is due to the cost effectiveness of AM, versatility in product design, and to ensure Honeywell remains competitive in the future. In terms of reducing expenses, reusing powder enables costs to be approximately 45% less than using virgin powder. With these key pieces of information, the motivations for this capstone project are understood to a fuller and more profound degree.
ContributorsQuigley, Elizabeth (Co-author) / Luo, Zheyu (Co-author) / Murella, Anoosha (Co-author) / Lee, Wey Lyn (Co-author) / Adams, James (Thesis director) / Tasooji, Amaneh (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Autism Spectrum Disorder is a disorder that makes learning, socializing and daily living much more challenging for affected children and adults because of their atypical behaviors. A few examples of these behaviors are repetitive movements, impulsive actions, inability to communicate in a social setting, and many more. There is a stigma behind autism that is caused by those who are not well informed on the disorder. These people lack information, and in the past, it was assumed that the disorder is caused by "bad parenting." The parents are then afraid of social shame brought upon them by their child and neglect or avoid a diagnosis for their child's disorder. This becomes a vicious cycle that has negative effects on the affected individuals and their loved ones. Neglect of a diagnosis may also be caused by misinformation interpreted by the parents as their child develops. The parents do not realize this child developing outside of normal behavioral patterns. Years of research have been done to attempt to alleviate the symptoms of autism and cure the disorder. The Autism and Asperger's Program at ASU has developed a year-long dietary plan that increases supplementation to alleviate nutritional deficiencies in participants with autism. These deficiencies include vitamins, minerals, essential fatty acids, sulfate, carnitine, and digestive enzymes such as sucrase, maltase, and lactase. The participants were also put on a gluten-free casein-free diet toward the end of the study. To test the effectiveness of the treatment, the Severity of Autism Scale (SAS) and Social Responsiveness Scales (SRS) were used. The SAS tested the overall severity of ASD participants by rating them from one to ten, ten being "very severe" in terms of ASD symptoms. The results of this scale were compared at the beginning of the study (day 0) and at the end of the study (day 365). The SRS tested the social responsiveness of participants in the form of overall SRS and five subscales that included awareness, cognition, communication, motivation, and mannerisms. These results were also compared at the beginning and end of the study. After analysis of the data, there seemed to be no correlation between age and severity of autism/social responsiveness of participants. There was also no statistically significant data to suggest that there was a correlation between gender and severity of autism/social responsiveness of participants. However, there was statistically significant evidence that the treatment group did improve over the non-treatment/delayed treatment group in both the SAS and SRS. Neither age nor gender had a significant effect on the effectiveness of the treatment. These positive findings suggest that the integrated dietary
utritional therapy was beneficial, and future research on dietary treatments for autism and other disorders is recommended. This may also further discoveries of affected epigenomes with regards to nutritional treatments in disorders like ASD. The epigenome is the methylation and demethylation of the genome that mediates gene expression.
utritional therapy was beneficial, and future research on dietary treatments for autism and other disorders is recommended. This may also further discoveries of affected epigenomes with regards to nutritional treatments in disorders like ASD. The epigenome is the methylation and demethylation of the genome that mediates gene expression.
ContributorsGutgsell, Crystal Megan (Author) / Adams, James (Thesis director) / Pollard, Elena (Committee member) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
A novel approach, the Invariant Based Theory of Composites and the "Trace" method it proposes, has the potential to reduce aerospace composite development times and costs by over 30% thus reinvigorating the development process and encouraging composite technology growth. The "trace" method takes advantage of inherent stiffness properties of laminates, specifically carbon fiber, to make predictions of material properties used to derive design allowables. The advantages of the "trace" theory may not necessarily be specific to the aerospace industry, however many automotive manufacturers are facing environmental, social and political pressure to increase the gas mileage in their vehicles and reduce their carbon footprint. Therefore, the use of lighter materials, such as carbon fiber composites, to replace heavier metals in cars is inevitable yet as of now few auto manufacturers implement composites in their cars. The high material, testing and development costs, much like the aerospace industry, have been prohibitive to widespread use of these materials but progress is being made in overcoming those challenges. The "trace" method, while initially intended for quasi-isotropic, aerospace grade carbon-fiber laminates, still yields reasonable, and correctable, results for types of laminates as well such as with woven fabrics and thermoplastic matrices, much of which are being used in these early stages of automotive composite development. Despite the varying use of materials, the "trace" method could potentially boost automotive composites in a similar way to the aerospace industry by reducing testing time and costs and perhaps even playing a role in establishing emerging simulations of these materials.
ContributorsBrown, William Ross (Author) / Adams, James (Thesis director) / Anwar, Shahriar (Committee member) / Krause, Stephen (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The vastly growing field of supercomputing is in dire need of a new measurement system to optimize JMRAM (Josephson junction magnetoresistive random access memory) devices. To effectively measure these devices, an ultra-low-noise, low cost cryogenic dipping probe with a dynamic voltage range is required. This dipping probe has been designed by ASU with <100 nVp-p noise, <10 nV offsets, 10 pV to 16 mV voltage range, and negligible thermoelectric drift. There is currently no other research group or company that can currently match both these low noise levels and wide voltage range. Two different dipping probes can be created with these specifications: one for high-use applications and one for low-use applications. The only difference between these probes is the outer shell; the high-use application probe has a shell made of G-10 fiberglass for a higher price, and the low-use application probe has a shell made of AISI 310 steel for a lower price. Both types of probes can be assembled in less than 8 hours for less than $2,500, requiring only soldering expertise. The low cost and short time to create these probes makes wide profit margins possible. The market for these cryogenic dipping probes is currently untapped, as most research groups and companies that use these probes build their own, which allows for rapid business growth. These potential consumers can be easily reached by marketing these probes at superconducting conferences. After several years of selling >50 probes, mass production can easily become possible by hiring several technicians, and still maintaining wide profit margins.
ContributorsHudson, Brooke Ashley (Author) / Adams, James (Thesis director) / Anwar, Shahriar (Committee member) / Materials Science and Engineering Program (Contributor) / W. P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Background: The purpose of this study was to determine the acceptability of a survey for MPN patients about: a) how patients with MPN cancer perceive information relayed from their healthcare providers in regards to integrative medicine and b) how patients use integrative medicine modalities to cope with their symptom burden (i.e. fatigue, headaches, abdominal discomfort). Additionally, we assessed what MPN patients thought about the survey (i.e., questions asked, how it could be modified, acceptability). This paper presents the patient's assessment of the survey. This information will be used to finalize the survey and distribute nationally to address integrative medicine and symptom burden in MPN patients. Methods: The survey was taken by 366, English speaking patients previously diagnosed with essential thrombocythemia, polycythemia vera, or myelofibrosis (primary and post polycythemia vera/post essential thrombocythemia) and ages 18 or older. The survey had XX questions and took approximately 20 minutes to complete. Acceptability questions were qualitatively analyzed and used to construct recurring themes and modifications for the final MPN Integrative Survey. Results: The following themes were recurrent in the acceptability responses; MPN symptom burden comments, views on healthcare, comments about demographics, and requests for survey modifications. When asked which Integrative Therapies have been used to treat symptom burden, participants most commonly named guidance therapy (i.e. counseling, prayer), physiotherapy ,and supplements administered orally, intravenously, intramuscularly, and topically. Conclusions: These results suggest this survey is an acceptable and feasible tool for MPN patients to assess how patients with MPN cancer perceive information relayed from their healthcare providers in regards to integrative medicine, and how patients use integrative medicine modalities to cope with their symptom burden. These findings also provide a better understanding of what facilitates and prevents MPN patients from using Integrative Medicine to treat MPN symptoms, as well as suggests useful survey modifications to inform the final MPN Integrative Survey.
ContributorsLebowitz, Nicole (Author) / Huberty, Jennifer (Thesis director) / Gowin, Krisstina (Committee member) / School of Nutrition and Health Promotion (Contributor) / School of Human Evolution and Social Change (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Objective: The purpose of this study was to determine the feasibility (i.e., acceptability) of a yoga intervention implemented within a preschool with typically and atypically developing children.
Participants: 29 children between the ages of three and five years that are currently attending the Mary Lou Fulton Teacher’s College Preschool.
Methods: Children participated in eight ~15-20-minute yoga sessions consisting of an opening circle, breathing, mindful movement, and a closing circle with relaxation time. Parents completed weekly homework assignments and surveys about the homework. Parents and teachers both completed daily behavior logs to track their child’s number of outbursts, mention of yoga, and use of yoga. Additionally, parents completed a post-intervention survey to determine overall satisfaction.
Results: The Preschool Behavior Questionnaire paired t-test results did not demonstrate any significant differences in pre-intervention (M=13.00, SD±7.55) and post-intervention (M=11.95, SD±6.92) scores, t(17)=0.94, p=0.36. There were no visible correlations between outbursts and use of yoga as reported by parents, but the use of yoga increased with the number of outbursts as reported by parents. Overall, parents felt the sessions had a positive effect on their child’s behavior and felt their children enjoyed the sessions.
Conclusion: Implementing classroom-based yoga programs could be an acceptable, realistic option to manage and prevent negative behaviors in preschool children.
Participants: 29 children between the ages of three and five years that are currently attending the Mary Lou Fulton Teacher’s College Preschool.
Methods: Children participated in eight ~15-20-minute yoga sessions consisting of an opening circle, breathing, mindful movement, and a closing circle with relaxation time. Parents completed weekly homework assignments and surveys about the homework. Parents and teachers both completed daily behavior logs to track their child’s number of outbursts, mention of yoga, and use of yoga. Additionally, parents completed a post-intervention survey to determine overall satisfaction.
Results: The Preschool Behavior Questionnaire paired t-test results did not demonstrate any significant differences in pre-intervention (M=13.00, SD±7.55) and post-intervention (M=11.95, SD±6.92) scores, t(17)=0.94, p=0.36. There were no visible correlations between outbursts and use of yoga as reported by parents, but the use of yoga increased with the number of outbursts as reported by parents. Overall, parents felt the sessions had a positive effect on their child’s behavior and felt their children enjoyed the sessions.
Conclusion: Implementing classroom-based yoga programs could be an acceptable, realistic option to manage and prevent negative behaviors in preschool children.
ContributorsColeman, Lindsey Katlin (Author) / Huberty, Jennifer (Thesis director) / Rotheram-Fuller, Erin (Committee member) / Mullady, Allison (Committee member) / School of Nutrition and Health Promotion (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05