Matching Items (11)
Filtering by
- Genre: Masters Thesis
Description
In recent years, an increase of environmental temperature in urban areas has raised many concerns. These areas are subjected to higher temperature compared to the rural surrounding areas. Modification of land surface and the use of materials such as concrete and/or asphalt are the main factors influencing the surface energy balance and therefore the environmental temperature in the urban areas. Engineered materials have relatively higher solar energy absorption and tend to trap a relatively higher incoming solar radiation. They also possess a higher heat storage capacity that allows them to retain heat during the day and then slowly release it back into the atmosphere as the sun goes down. This phenomenon is known as the Urban Heat Island (UHI) effect and causes an increase in the urban air temperature. Many researchers believe that albedo is the key pavement affecting the urban heat island. However, this research has shown that the problem is more complex and that solar reflectivity may not be the only important factor to evaluate the ability of a pavement to mitigate UHI. The main objective of this study was to analyze and research the influence of pavement materials on the near surface air temperature. In order to accomplish this effort, test sections consisting of Hot Mix Asphalt (HMA), Porous Hot Mix asphalt (PHMA), Portland Cement Concrete (PCC), Pervious Portland Cement Concrete (PPCC), artificial turf, and landscape gravels were constructed in the Phoenix, Arizona area. Air temperature, albedo, wind speed, solar radiation, and wind direction were recorded, analyzed and compared above each pavement material type. The results showed that there was no significant difference in the air temperature at 3-feet and above, regardless of the type of the pavement. Near surface pavement temperatures were also measured and modeled. The results indicated that for the UHI analysis, it is important to consider the interaction between pavement structure, material properties, and environmental factors. Overall, this study demonstrated the complexity of evaluating pavement structures for UHI mitigation; it provided great insight on the effects of material types and properties on surface temperatures and near surface air temperature.
ContributorsPourshams-Manzouri, Tina (Author) / Kaloush, Kamil (Thesis advisor) / Wang, Zhihua (Thesis advisor) / Zapata, Claudia E. (Committee member) / Mamlouk, Michael (Committee member) / Arizona State University (Publisher)
Created2013
Description
The history of outdoor water use in the Phoenix, Arizona metropolitan area has given rise to a general landscape aesthetic and pattern of residential irrigation that seem in discord with the natural desert environment. While xeric landscaping that incorporates native desert ecology has potential for reducing urban irrigation demand, there are societal and environmental factors that make mesic landscaping, including shade trees and grass lawns, a common choice for residential yards. In either case, there is potential for water savings through irrigation schedules based on fluxes affecting soil moisture in the active plant rooting zone. In this thesis, a point-scale model of soil moisture dynamics was applied to two urban sites in the Phoenix area: one with xeric landscaping, and one with mesic. The model was calibrated to observed soil moisture data from irrigated and non-irrigated sensors, with local daily precipitation and potential evapotranspiration records as model forcing. Simulations were then conducted to investigate effects of irrigation scheduling, plant stress parameters, and precipitation variability on soil moisture dynamics, water balance partitioning, and plant water stress. Results indicated a substantial difference in soil water storage capacity at the two sites, which affected sensitivity to irrigation scenarios. Seasonal variation was critical in avoiding unproductive water losses at the xeric site, and allowed for small water savings at the mesic site by maintaining mild levels of plant stress. The model was also used to determine minimum annual irrigation required to achieve specified levels of plant stress at each site using long-term meteorological records. While the xeric site showed greater potential for water savings, a bimodal schedule consisting of low winter and summer irrigation was identified as a means to conserve water at both sites, with moderate levels of plant water stress. For lower stress levels, potential water savings were found by fixing irrigation depth and seasonally varying the irrigation interval, consistent with municipal recommendations in the Phoenix metropolitan area. These results provide a deeper understanding of the ecohydrologic differences between the two types of landscape treatments, and can assist water and landscape managers in identifying opportunities for water savings in desert urban areas.
ContributorsVolo, Thomas J (Author) / Vivoni, Enrique R (Thesis advisor) / Ruddell, Benjamin L (Committee member) / Wang, Zhihua (Committee member) / Arizona State University (Publisher)
Created2013
Description
The partitioning of available solar energy into different fluxes at the Earth's surface is important in determining different physical processes, such as turbulent transport, subsurface hydrology, land-atmospheric interactions, etc. Direct measurements of these turbulent fluxes were carried out using eddy-covariance (EC) towers. However, the distribution of EC towers is sparse due to relatively high cost and practical difficulties in logistics and deployment. As a result, data is temporally and spatially limited and is inadequate to be used for researches at large scales, such as regional and global climate modeling. Besides field measurements, an alternative way is to estimate turbulent fluxes based on the intrinsic relations between surface energy budget components, largely through thermodynamic equilibrium. These relations, referred as relative efficiency, have been included in several models to estimate the magnitude of turbulent fluxes in surface energy budgets such as latent heat and sensible heat. In this study, three theoretical models based on the lumped heat transfer model, the linear stability analysis and the maximum entropy principle respectively, were investigated. Model predictions of relative efficiencies were compared with turbulent flux data over different land covers, viz. lake, grassland and suburban surfaces. Similar results were observed over lake and suburban surface but significant deviation is found over vegetation surface. The relative efficiency of outgoing longwave radiation is found to be orders of magnitude deviated from theoretic predictions. Meanwhile, results show that energy partitioning process is influenced by the surface water availability to a great extent. The study provides insight into what property is determining energy partitioning process over different land covers and gives suggestion for future models.
ContributorsYang, Jiachuan (Author) / Wang, Zhihua (Thesis advisor) / Huang, Huei-Ping (Committee member) / Vivoni, Enrique (Committee member) / Mays, Larry (Committee member) / Arizona State University (Publisher)
Created2012
Description
Land-atmosphere interactions of semiarid shrublands have garnered significant scientific interest. One of the main tools used for this research is the eddy covariance (EC) method, which measures fluxes of energy, water vapor, and carbon dioxide. EC fluxes can be difficult to interpret due to complexities within the EC footprint (i.e. the surface conditions that contribute to the flux measurements). Most EC studies use a small number of soil probes to estimate the land surface states underlying the measured fluxes, which likely undersamples the footprint-scale conditions, especially in semiarid shrublands which are characterized by high spatial and temporal variability. In this study, I installed a dense network of soil moisture and temperature probe profiles in the footprint region of an EC tower at two semiarid sites: a woody savanna in southern Arizona and a mixed shrubland in southern New Mexico. For data from May to September 2013, I link land surface states to EC fluxes through daily footprints estimated using an analytical model. Novel approaches are utilized to partition evapotranspiration, estimate EC footprint soil states, connect differences in fluxes to footprint composition, and assess key drivers behind soil state variability. I verify the hypothesis that a small number of soil probes poorly estimates the footprint conditions for soil moisture, due to its high spatial variability. Soil temperature, however, behaves more consistently in time and space. As such, distributed surface measurements within the EC footprint allow for stronger ties between evapotranspiration and moisture, but demonstrate no significant improvement in connecting sensible heat flux and temperature. I also find that in these systems vegetation cover appears to have stronger controls on soil moisture and temperature than does soil texture. Further, I explore the influence of footprint vegetation composition on the measured fluxes, which reveals that during the monsoon season evaporative fraction tends to increase with footprint bare soil coverage for the New Mexico site and that the ratio of daily transpiration to evapotranspiration increases with grass coverage at the Arizona site. The thesis results are useful for understanding the land-atmosphere interactions of these ecosystems and for guiding future EC studies in heterogeneous landscapes.
ContributorsAnderson, Cody Alan (Author) / Vivoni, Enrique R (Thesis advisor) / Wang, Zhihua (Committee member) / Mays, Larry W. (Committee member) / Arizona State University (Publisher)
Created2013
Description
The Colorado River Basin (CRB) is the primary source of water in the
southwestern United States. A key step to reduce the uncertainty of future streamflow
projections in the CRB is to evaluate the performance of historical simulations of General
Circulation Models (GCMs). In this study, this challenge is addressed by evaluating the
ability of nineteen GCMs from the Coupled Model Intercomparison Project Phase Five
(CMIP5) and four nested Regional Climate Models (RCMs) in reproducing the statistical
properties of the hydrologic cycle and temperature in the CRB. To capture the transition
from snow-dominated to semiarid regions, analyses are conducted by spatially averaging
the climate variables in four nested sub-basins. Most models overestimate the mean
annual precipitation (P) and underestimate the mean annual temperature (T) at all
locations. While a group of models capture the mean annual runoff at all sub-basins with
different strengths of the hydrological cycle, another set of models overestimate the mean
annual runoff, due to a weak cycle in the evaporation channel. An abrupt increase in the
mean annual T in observed and most of the simulated time series (~0.8 °C) is detected at
all locations despite the lack of any statistically significant monotonic trends for both P
and T. While all models simulate the seasonality of T quite well, the phasing of the
seasonal cycle of P is fairly reproduced in just the upper, snow-dominated sub-basin.
Model performances degrade in the larger sub-basins that include semiarid areas, because
several GCMs are not able to capture the effect of the North American monsoon. Finally,
the relative performances of the climate models in reproducing the climatologies of P and
T are quantified to support future impact studies in the basin.
southwestern United States. A key step to reduce the uncertainty of future streamflow
projections in the CRB is to evaluate the performance of historical simulations of General
Circulation Models (GCMs). In this study, this challenge is addressed by evaluating the
ability of nineteen GCMs from the Coupled Model Intercomparison Project Phase Five
(CMIP5) and four nested Regional Climate Models (RCMs) in reproducing the statistical
properties of the hydrologic cycle and temperature in the CRB. To capture the transition
from snow-dominated to semiarid regions, analyses are conducted by spatially averaging
the climate variables in four nested sub-basins. Most models overestimate the mean
annual precipitation (P) and underestimate the mean annual temperature (T) at all
locations. While a group of models capture the mean annual runoff at all sub-basins with
different strengths of the hydrological cycle, another set of models overestimate the mean
annual runoff, due to a weak cycle in the evaporation channel. An abrupt increase in the
mean annual T in observed and most of the simulated time series (~0.8 °C) is detected at
all locations despite the lack of any statistically significant monotonic trends for both P
and T. While all models simulate the seasonality of T quite well, the phasing of the
seasonal cycle of P is fairly reproduced in just the upper, snow-dominated sub-basin.
Model performances degrade in the larger sub-basins that include semiarid areas, because
several GCMs are not able to capture the effect of the North American monsoon. Finally,
the relative performances of the climate models in reproducing the climatologies of P and
T are quantified to support future impact studies in the basin.
ContributorsGautam, Jenita (Author) / Mascaro, Giuseppe (Thesis advisor) / Vivoni, Enrique (Committee member) / Wang, Zhihua (Committee member) / Arizona State University (Publisher)
Created2018
Description
The increasingly recurrent extraordinary flood events in the metropolitan area of Monterrey, Mexico have led to significant stakeholder interest in understanding the hydrologic response of the Santa Catarina watershed to extreme events. This study analyzes a flood mitigation strategy proposed by stakeholders through a participatory workshop and are assessed using two hydrological models: The Hydrological Modeling System (HEC-HMS) and the Triangulated Irregular Network (TIN)-based Real-time Integrated Basin Simulator (tRIBS).
The stakeholder-derived flood mitigation strategy consists of placing new hydraulic infrastructure in addition to the current flood controls in the basin. This is done by simulating three scenarios: (1) evaluate the impact of the current structure, (2) implementing a large dam similar to the Rompepicos dam and (3) the inclusion of three small detention dams. These mitigation strategies are assessed in the context of a major flood event caused by the landfall of Hurricane Alex in July 2010 through a consistent application of the two modeling tools. To do so, spatial information on topography, soil, land cover and meteorological forcing were assembled, quality-controlled and input into each model. Calibration was performed for each model based on streamflow observations and maximum observed reservoir levels from the National Water Commission in Mexico.
Simulation analyses focuses on the differential capability of the two models in capturing the spatial variability in rainfall, topographic conditions, soil hydraulic properties and its effect on the flood response in the presence of the different flood mitigation structures. The implementation of new hydraulic infrastructure is shown to have a positive impact on mitigating the flood peak with a more favorable reduction in the peak at the outlet from the larger dam (16.5% in tRIBS and 23% in HEC-HMS) than the collective effect from the small structures (12% in tRIBS and 10% in HEC-HMS). Furthermore, flood peak mitigation depends strongly on the number and locations of the new dam sites in relation to the spatial distribution of rainfall and flood generation. Comparison of the two modeling approaches complements the analysis of available observations for the flood event and provides a framework within which to derive a multi-model approach for stakeholder-driven solutions.
The stakeholder-derived flood mitigation strategy consists of placing new hydraulic infrastructure in addition to the current flood controls in the basin. This is done by simulating three scenarios: (1) evaluate the impact of the current structure, (2) implementing a large dam similar to the Rompepicos dam and (3) the inclusion of three small detention dams. These mitigation strategies are assessed in the context of a major flood event caused by the landfall of Hurricane Alex in July 2010 through a consistent application of the two modeling tools. To do so, spatial information on topography, soil, land cover and meteorological forcing were assembled, quality-controlled and input into each model. Calibration was performed for each model based on streamflow observations and maximum observed reservoir levels from the National Water Commission in Mexico.
Simulation analyses focuses on the differential capability of the two models in capturing the spatial variability in rainfall, topographic conditions, soil hydraulic properties and its effect on the flood response in the presence of the different flood mitigation structures. The implementation of new hydraulic infrastructure is shown to have a positive impact on mitigating the flood peak with a more favorable reduction in the peak at the outlet from the larger dam (16.5% in tRIBS and 23% in HEC-HMS) than the collective effect from the small structures (12% in tRIBS and 10% in HEC-HMS). Furthermore, flood peak mitigation depends strongly on the number and locations of the new dam sites in relation to the spatial distribution of rainfall and flood generation. Comparison of the two modeling approaches complements the analysis of available observations for the flood event and provides a framework within which to derive a multi-model approach for stakeholder-driven solutions.
ContributorsCázares Rodríguez, Jorge E (Author) / Vivoni, Enrique (Thesis advisor) / Wang, Zhihua (Committee member) / Mays, Larry W. (Committee member) / Arizona State University (Publisher)
Created2016
Description
This research work uses the Weather Research and Forecasting Model to study the effect of large wind farms with an area of 900 square kilometers and a high power density of 7.58 W/m2 on regional climate. Simulations were performed with a wind farm parameterization scheme turned on in south Oregon. Control cases were also run with the parameterization scheme turned off. The primary emphasis was on offshore wind farms. Some analysis on onshore wind farms was also performed. The effects of these wind farms were studied on the vertical profiles of temperature, wind speed, and moisture as well as on temperature and on wind speed near the surface and at hub height. The effects during the day and at night were compared. Seasonal variations were also studied by performing simulations in January and in July. It was seen that wind farms produce a reduction in wind speed at hub height and that the downward propagation of this reduction in wind speed lessens as the atmosphere becomes more stable. In all the cases studied, the wind farms produced a warming effect near the surface, with greater atmospheric stability leading to higher near-surface temperatures. It was also observed that wind farms caused a drying effect below the hub height and a moistening effect above it, because they had facilitated vertical transport of moisture in the air from the lower layers of the atmosphere to the layers of the atmosphere above the wind farm.
ContributorsGeorge, Sushant (Author) / Huang, Huei-Ping (Thesis advisor) / Wang, Zhihua (Committee member) / Calhoun, Ronald (Committee member) / Arizona State University (Publisher)
Created2016
Description
Bioretention basins are a common stormwater best management practice (BMP) used to mitigate the hydrologic consequences of urbanization. Dry wells, also known as vadose-zone wells, have been used extensively in bioretention basins in Maricopa County, Arizona to decrease total drain time and recharge groundwater. A mixed integer nonlinear programming (MINLP) model has been developed for the minimum cost design of bioretention basins with dry wells.
The model developed simultaneously determines the peak stormwater inflow from watershed parameters and optimizes the size of the basin and the number and depth of dry wells based on infiltration, evapotranspiration (ET), and dry well characteristics and cost inputs. The modified rational method is used for the design storm hydrograph, and the Green-Ampt method is used for infiltration. ET rates are calculated using the Penman Monteith method or the Hargreaves-Samani method. The dry well flow rate is determined using an equation developed for reverse auger-hole flow.
The first phase of development of the model is to expand a nonlinear programming (NLP) for the optimal design of infiltration basins for use with bioretention basins. Next a single dry well is added to the NLP bioretention basin optimization model. Finally the number of dry wells in the basin is modeled as an integer variable creating a MINLP problem. The NLP models and MINLP model are solved using the General Algebraic Modeling System (GAMS). Two example applications demonstrate the efficiency and practicality of the model.
The model developed simultaneously determines the peak stormwater inflow from watershed parameters and optimizes the size of the basin and the number and depth of dry wells based on infiltration, evapotranspiration (ET), and dry well characteristics and cost inputs. The modified rational method is used for the design storm hydrograph, and the Green-Ampt method is used for infiltration. ET rates are calculated using the Penman Monteith method or the Hargreaves-Samani method. The dry well flow rate is determined using an equation developed for reverse auger-hole flow.
The first phase of development of the model is to expand a nonlinear programming (NLP) for the optimal design of infiltration basins for use with bioretention basins. Next a single dry well is added to the NLP bioretention basin optimization model. Finally the number of dry wells in the basin is modeled as an integer variable creating a MINLP problem. The NLP models and MINLP model are solved using the General Algebraic Modeling System (GAMS). Two example applications demonstrate the efficiency and practicality of the model.
ContributorsLacy, Mason (Author) / Mays, Larry W. (Thesis advisor) / Fox, Peter (Committee member) / Wang, Zhihua (Committee member) / Arizona State University (Publisher)
Created2016
Description
Rapid urbanization and population growth occurring in the cities of South Western
United States have led to significant modifications in its environment at local and
regional scales. Both local and regional climate changes are expected to have massive
impacts on the hydrology of Colorado River Basin (CRB), thereby accentuating the need
of study of hydro-climatic impacts on water resource management in this region. This
thesis is devoted to understanding the impact of land use and land cover (LULC) changes
on the local and regional hydroclimate, with the goal to address urban planning issues
and provide guidance for sustainable development.
In this study, three densely populated urban areas, viz. Phoenix, Las Vegas and
Denver in the CRB are selected to capture the various dimensions of the impacts of land
use changes on the regional hydroclimate in the entire CRB. Weather Research and
Forecast (WRF) model, incorporating the latest urban modeling system, is adopted for
regional climate modeling. Two major types of urban LULC changes are studied in this
Thesis: (1) incorporation of urban trees with their radiative cooling effect, tested in
Phoenix metropolitan, and (2) projected urban expansion in 2100 obtained from
Integrated Climate and Land Use Scenarios (ICLUS) developed by the US
Environmental Protection Agency for all three cities.
The results demonstrated prominent nocturnal cooling effect of due to radiative
shading effect of the urban trees for Phoenix reducing urban surface and air temperature
by about 2~9 °C and 1~5 °C respectively and increasing relative humidity by 10~20%
during an mean diurnal cycle. The simulations of urban growth in CRB demonstratedii
nocturnal warming of about 0.36 °C, 1.07 °C, and 0.94 °C 2m-air temperature and
comparatively insignificant change in daytime temperature, with the thermal environment
of Denver being the most sensitive the urban growth. The urban hydroclimatic study
carried out in the thesis assists in identifying both context specific and generalizable
relationships, patterns among the cities, and is expected to facilitate urban planning and
management in local (cities) and regional scales.
United States have led to significant modifications in its environment at local and
regional scales. Both local and regional climate changes are expected to have massive
impacts on the hydrology of Colorado River Basin (CRB), thereby accentuating the need
of study of hydro-climatic impacts on water resource management in this region. This
thesis is devoted to understanding the impact of land use and land cover (LULC) changes
on the local and regional hydroclimate, with the goal to address urban planning issues
and provide guidance for sustainable development.
In this study, three densely populated urban areas, viz. Phoenix, Las Vegas and
Denver in the CRB are selected to capture the various dimensions of the impacts of land
use changes on the regional hydroclimate in the entire CRB. Weather Research and
Forecast (WRF) model, incorporating the latest urban modeling system, is adopted for
regional climate modeling. Two major types of urban LULC changes are studied in this
Thesis: (1) incorporation of urban trees with their radiative cooling effect, tested in
Phoenix metropolitan, and (2) projected urban expansion in 2100 obtained from
Integrated Climate and Land Use Scenarios (ICLUS) developed by the US
Environmental Protection Agency for all three cities.
The results demonstrated prominent nocturnal cooling effect of due to radiative
shading effect of the urban trees for Phoenix reducing urban surface and air temperature
by about 2~9 °C and 1~5 °C respectively and increasing relative humidity by 10~20%
during an mean diurnal cycle. The simulations of urban growth in CRB demonstratedii
nocturnal warming of about 0.36 °C, 1.07 °C, and 0.94 °C 2m-air temperature and
comparatively insignificant change in daytime temperature, with the thermal environment
of Denver being the most sensitive the urban growth. The urban hydroclimatic study
carried out in the thesis assists in identifying both context specific and generalizable
relationships, patterns among the cities, and is expected to facilitate urban planning and
management in local (cities) and regional scales.
ContributorsUpreti, Ruby (Author) / Wang, Zhihua (Thesis advisor) / Vivoni, Enrique R. (Committee member) / Mascaro, Giuseppe (Committee member) / White, Dave (Committee member) / Arizona State University (Publisher)
Created2017
Description
The current level of carbon dioxide in ambient air is increasing and reinforcing the severity of global warming. Several techniques have been developed to capture the gas directly from the air. Moisture swing absorption (MSA) is a mechanism through which a reactive surface, namely resin beads, absorbs carbon dioxide when dry and releases it when wet. The ionic complexity of the surface of the bead interacts with CO2 when H2O contents are low, and CO2 diffuses as bicarbonate or carbonate. Hence, diffusion-drift-reaction equations describe the moving species behavior MS sorbent. A numerical model has been developed previously applying finite difference scheme (FDS) to estimate the evolution of species concentrations over uniform time and space intervals. The methodology was based on a specific membrane and bead geometry. In this study, FDS was employed again with modifications over the boundary conditions. Neumann boundary condition was replaced by Robin boundary condition which enforced diffusion and drift fluxes at the center of the sorbent. Furthermore, the generic equations were approximated by another numerical scheme, Finite volume scheme (FVS), which discretizes the spatial domain into cells that conserves the mass of species within. The model was predicted to reduce the total carbon mass loss within the system. Both schemes were accommodated with a simulated model of isolated chamber that contained arbitrary sorbent. Moreover, to derive the outcomes of absorption/desorption cycles and validate the performance of FVS, Langmuir curve was utilized to obtain CO2 saturation in the sorbent and examine two scenarios: one by varying the partial pressure of CO2 (PCO2) in the chamber at constant H2O (PH2O), or changing PH2O at constant PCO2. The results from FDS approximation, when adjusting the center with Robin boundary condition, show 0.11% lower carbon mass gain than when applying Neumann boundary condition. On the other hand, FVS minimizes the mass loss by 0.3% lower than the original total carbon mass and achieves sorbent saturation without any adjustment. Moreover, the isotherm curve demonstrates that increasing PH2O reduces CO2 saturation and is dependent on the linear and non-linear correlations used to estimate water concentration on the surface.
ContributorsMejbel, Meteb (Author) / Lackner, Klaus (Thesis advisor) / Boyer, Treavor (Committee member) / Wang, Zhihua (Committee member) / Arizona State University (Publisher)
Created2021