Filtering by
- Creators: Barrett, The Honors College
Motorcycles must be designed for safety and long operation. Front suspension systems must in turn be safe and able to operate for long service lives. Challenges to achieving safe and long service lifetimes include designing components (rims, axles, forks, etc.) to withstand various loading conditions not just once but numerous times as a matter of fatigue life. An already developed CAD model of a motorcycle suspension was taken and optimized for various loading conditions. These conditions included static loading, braking, cornering, and wheelie and front impact loads. In all cases, front impact load was the critical loading condition when FEA in SolidWorks Simulation was conducted for the components. All components were then optimized to handle the impact load by changing geometry until safety factors of 4.0 ± 0.25 were achieved. Components were then analyzed for fatigue life, with all steel and magnesium components having infinite predicted fatigue lives and all aluminum components having fatigue lives predicted with corrected S-N curves created for up to 500 million loading cycles. The design was optimized with all components becoming improved for stress compliance, with room for improvement existing in both defining loads for analysis and developing more accurate and rigorous fatigue life models.
Currently, a new design for collapsible, lightweight ammunition package (LAP) has been proposed for military applications. The design employs rubber gaskets which enable the LAP to fold when it is empty, in addition to carbon fiber walls which decrease weight while increasing strength. To evaluate the new design, it is desired to perform a finite element analysis to simulate the behavior of the can under various drop impact conditions. Because the design includes complex joinery, which is often difficult to model, the purpose of this thesis project is to determine the most effective methodology to define the physical system using finite elements for impact simulations, and consequently perform the desired analysis for the LAP.
In nature, some animals have an exoskeleton that provides protection, strength, and stability to the organism, but in engineering, an exoskeleton refers to a device that augments or aids human ability. Since the 1890s, engineers have been designing exoskeletal devices, and conducting research into the possible uses of such devices. These bio-inspired mechanisms do not necessarily relate to a robotic device, though since the 1900s, robotic principles have been applied to the design of exoskeletons making their development a subfield in robotic research. There are different multiple types of exoskeletons that target different areas of the human body, and the targeted area depends on the need of the device. Usually, the devices are developed for medical or military usage; for this project, the focus is on medical development of an automated elbow joint to assist in rehabilitation. This project is being developed for therapeutic purposes in conjunction between Arizona State University and Mayo Clinic. Because of the nature of this project, I am responsible for the development of a lightweight brace that could be applied to the elbow joint that was designed by Dr. Kevin Hollander. In this project, my research centered on the use of the Wilmer orthosis brace design, and its possible application to the exoskeleton elbow being developed for Mayo Clinic. This brace is a lightweight solution that provides extra comfort to the user.