Matching Items (39)
Filtering by
- All Subjects: Chemistry
- All Subjects: Bioengineering
- All Subjects: Synthetic Biology
- Creators: Yan, Hao
- Creators: Brafman, David
- Member of: Theses and Dissertations
Description
In eukaryotes, DNA is packed in a highly condensed and hierarchically organized structure called chromatin, in which DNA tightly wraps around the histone octamer consisting of one histone 3-histone 4 (H3-H4) tetramer and two histone 2A- histone 2B (H2A-H2B) dimers with 147 base pairs in an almost two left handed turns. Almost all DNA dependent cellular processes, such as DNA duplication, transcription, DNA repair and recombination, take place in the chromatin form. Based on the critical importance of appropriate chromatin condensation, this thesis focused on the folding behavior of the nucleosome array reconstituted using different templates with various controllable factors such as histone tail modification, linker DNA length, and DNA binding proteins. Firstly, the folding behaviors of wild type (WT) and nucleosome arrays reconstituted with acetylation on the histone H4 at lysine 16 (H4K16 (Ac)) were studied. In contrast to the sedimentation result, atomic force microscopy (AFM) measurements revealed no apparent difference in the compact nucleosome arrays between WT and H4K16 (Ac) and WT. Instead, an optimal loading of nucleosome along the template was found necessary for the Mg2+ induced nucleosome array compaction. This finding leads to the further study on the role of linker DNA in the nucleosome compaction. A method of constructing DNA templates with varied linker DNA lengths was developed, and uniformly and randomly spaced nucleosome arrays with average linker DNA lengths of 30 bp and 60 bp were constructed. After comprehensive analyses of the nucleosome arrays' structure in mica surface, the lengths of the linker DNA were found playing an important role in controlling the structural geometries of nucleosome arrays in both their extended and compact forms. In addition, higher concentration of the DNA binding domain of the telomere repeat factor 2 (TRF2) was found to stimulate the compaction of the telomeric nucleosome array. Finally, AFM was successfully applied to investigate the nucleosome positioning behaviors on the Mouse Mammary Tumor Virus (MMTV) promoter region, and two highly positioned region corresponded to nucleosome A and B were identified by this method.
ContributorsFu, Qiang (Author) / Lindsay, Stuart M (Thesis advisor) / Yan, Hao (Committee member) / Ghirlanda, Giovanna (Committee member) / Arizona State University (Publisher)
Created2010
Description
Cell fate is a complex and dynamic process with many genetic components. It has often been likened to “multistable” mathematical systems because of the numerous possible “stable” states, or cell types, that cells may end up in. Due to its complexity, understanding the process of cell fate and differentiation has proven challenging. A better understanding of cell differentiation has applications in regenerative stem cell therapies, disease pathologies, and gene regulatory networks.
A variety of different genes have been associated with cell fate. For example, the Nanog/Oct-4/Sox2 network forms the core interaction of a gene network that maintains stem cell pluripotency, and Oct-4 and Sox2 also play a role in the tissue types that stem cells eventually differentiate into. Using the CRISPR/cas9 based homology independent targeted integration (HITI) method developed by Suzuki et al., we can integrate fluorescent tags behind genes with reasonable efficiency via the non-homologous end joining (NHEJ) DNA repair pathway. With human embryonic kidney (HEK) 293T cells, which can be transfected with high efficiencies, we aim to create a three-parameter reporter cell line with fluorescent tags for three different genes related to cell fate. This cell line would provide several advantages for the study of cell fate, including the ability to quantitatively measure cell state, observe expression heterogeneity among a population of genetically identical cells, and easily monitor fluctuations in expression patterns.
The project is partially complete at this time. This report discusses progress thus far, as well as the challenges faced and the future steps for completing the reporter line.
A variety of different genes have been associated with cell fate. For example, the Nanog/Oct-4/Sox2 network forms the core interaction of a gene network that maintains stem cell pluripotency, and Oct-4 and Sox2 also play a role in the tissue types that stem cells eventually differentiate into. Using the CRISPR/cas9 based homology independent targeted integration (HITI) method developed by Suzuki et al., we can integrate fluorescent tags behind genes with reasonable efficiency via the non-homologous end joining (NHEJ) DNA repair pathway. With human embryonic kidney (HEK) 293T cells, which can be transfected with high efficiencies, we aim to create a three-parameter reporter cell line with fluorescent tags for three different genes related to cell fate. This cell line would provide several advantages for the study of cell fate, including the ability to quantitatively measure cell state, observe expression heterogeneity among a population of genetically identical cells, and easily monitor fluctuations in expression patterns.
The project is partially complete at this time. This report discusses progress thus far, as well as the challenges faced and the future steps for completing the reporter line.
ContributorsLoveday, Tristan Andre (Author) / Wang, Xiao (Thesis director) / Brafman, David (Committee member) / Harrington Bioengineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Current research into live-cell dynamics, particularly those relating to chromatin structure and remodeling, are limited. The tools that are used to detect state changes in chromatin, such as Chromatin Immunoprecipitation and qPCR, require that the cell be killed off. This limits the ability of researchers to pinpoint changes in live cells over a longer period of time. As such, there is a need for a live-cell sensor that can detect chromatin state changes. The Chromometer is a transgenic chromatin state sensor designed to better understand human cell fate and the chromatin changes that occur. HOXD11.12, a DNA sequence that attracts repressive Polycomb group (PCG) proteins, was placed upstream of a core promoter-driven fluorescent reporter (AmCyan fluorescent protein, CFP) to link chromatin repression to a CFP signal. The transgene was stably inserted at an ectopic site in U2-OS (osteosarcoma) cells. Expression of CFP should reflect the epigenetic state at the HOXD locus, where several genes are regulated by Polycomb to control cell differentiation. U2-OS cells were transfected with the transgene and grown under selective pressure. Twelve colonies were identified as having integrated parts from the transgene into their genomes. PCR testing verified 2 cell lines that contain the complete transgene. Flow cytometry indicated mono-modal and bimodal populations in all transgenic cell colonies. Further research must be done to determine the effectiveness of this device as a sensor for live cell state change detection.
ContributorsBarclay, David (Co-author) / Simper, Jan (Co-author) / Haynes, Karmella (Thesis director) / Brafman, David (Committee member) / School of Life Sciences (Contributor) / Harrington Bioengineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Membrane proteins act as sensors, gatekeepers and information carriers in the cell membranes. Functional engineering of these proteins is important for the development of molecular tools for biosensing, therapeutics and as components of artificial cells. However, using protein engineering to modify existing protein structures is challenging due to the limitations of structural changes and difficulty in folding polypeptides into defined protein structures. Recent studies have shown that nanoscale architectures created by DNA nanotechnology can be used to mimic various protein functions, including some membrane proteins. However, mimicking the highly sophisticated structural dynamics of membrane proteins by DNA nanostructures is still in its infancy, mainly due to lack of transmembrane DNA nanostructures that can mimic the dynamic behavior, ubiquitous to membrane proteins. Here, I demonstrate design of dynamic DNA nanostructures to mimic two important class of membrane proteins. First, I describe a DNA nanostructure that inserts through lipid membrane and dynamically reconfigures upon sensing a membrane-enclosed DNA or RNA target, thereby transducing biomolecular information across the lipid membrane similar to G-protein coupled receptors (GPCR’s). I use the non-destructive sensing property of our GPCR-mimetic nanodevice to sense cancer associated micro-RNA biomarkers inside exosomes without the need of RNA extraction and amplification. Second, I demonstrate a fully reversibly gated DNA nanopore that mimics the ligand mediated gating of ion channel proteins. The 20.4 X 20.4 nm-wide channel of the DNA nanopore allows timed delivery of folded proteins across synthetic and biological membranes. These studies represent early examples of dynamic DNA nanostructures in mimicking membrane protein functions. I envision that they will be used in synthetic biology to create artificial cells containing GPCR-like and ion channel-like receptors, in site-specific drug or vaccine delivery and highly sensitive biosensing applications.
ContributorsDey, Swarup (Author) / Yan, Hao (Thesis advisor) / Hariadi, Rizal F (Thesis advisor) / Liu, Yan (Committee member) / Stephanopoulos, Nicholas (Committee member) / Arizona State University (Publisher)
Created2021
Description
Cardiovascular disease (CVD) remains the leading cause of mortality, resulting in 1 out of 4 deaths in the United States at the alarming rate of 1 death every 36 seconds, despite great efforts in ongoing research. In vitro research to study CVDs has had limited success, due to lack of biomimicry and structural complexity of 2D models. As such, there is a critical need to develop a 3D, biomimetic human cardiac tissue within precisely engineered in vitro platforms. This PhD dissertation involved development of an innovative anisotropic 3D human stem cell-derived cardiac tissue on-a-chip model (i.e., heart on-a-chip), with an enhanced maturation tissue state, as demonstrated through extensive biological assessments. To demonstrate the potential of the platform to study cardiac-specific diseases, the developed heart on-a-chip was used to model myocardial infarction (MI) due to exposure to hypoxia. The successful induction of MI on-a-chip (heart attack-on-a-chip) was evidenced through fibrotic tissue response, contractile dysregulation, and transcriptomic regulation of key pathways.This dissertation also described incorporation of CRISPR/Cas9 gene-editing to create a human induced pluripotent stem cell line (hiPSC) with a mutation in KCNH2, the gene implicated in Long QT Syndrome Type 2 (LQTS2). This novel stem cell line, combined with the developed heart on-a-chip technology, led to creation of a 3D human cardiac on-chip tissue model of LQTS2 disease.. Extensive mechanistic biological and electrophysiological characterizations were performed to elucidate the mechanism of R531W mutation in KCNH2, significantly adding to existing knowledge about LQTS2. In summary, this thesis described creation of a LQTS2 cardiac on-a-chip model, incorporated with gene-edited hiPSC-cardiomyocytes and hiPSC-cardiac fibroblasts, to study mechanisms of LQTS2.
Overall, this dissertation provides broad impact for fundamental studies toward cardiac biological studies as well as drug screening applications. Specifically, the developed heart on-a-chip from this dissertation provides a unique alternative platform to animal testing and 2D studies that recapitulates the human myocardium, with capabilities to model critical CVDs to study disease mechanisms, and/or ultimately lead to development of future therapeutic strategies.
ContributorsVeldhuizen, Jaimeson (Author) / Nikkhah, Mehdi (Thesis advisor) / Brafman, David (Committee member) / Ebrahimkhani, Mo (Committee member) / Migrino, Raymond Q (Committee member) / Plaisier, Christopher (Committee member) / Arizona State University (Publisher)
Created2021
Description
The advent of CRISPR/Cas9 revolutionized the field of genetic engineering and gave rise to the development of new gene editing tools including prime editing. Prime editing is a versatile gene editing method that mediates precise insertions and deletions and can perform all 12 types of point mutations. In turn, prime editing represents great promise in the design of new gene therapies and disease models where editing was previously not possible using current gene editing techniques. Despite advancements in genome modification technologies, parallel enrichment strategies of edited cells remain lagging behind in development. To this end, this project aimed to enhance prime editing using transient reporter for editing enrichment (TREE) technology to develop a method for the rapid generation of clonal isogenic cell lines for disease modeling. TREE uses an engineered BFP variant that upon a C-to-T conversion will convert to GFP after target modification. Using flow cytometry, this BFP-to-GFP conversion assay enables the isolation of edited cell populations via a fluorescent reporter of editing. Prime induced nucleotide engineering using a transient reporter for editing enrichment (PINE-TREE), pairs prime editing with TREE technology to efficiently enrich for prime edited cells. This investigation revealed PINE-TREE as an efficient editing and enrichment method compared to a conventional reporter of transfection (RoT) enrichment strategy. Here, PINE-TREE exhibited a significant increase in editing efficiencies of single nucleotide conversions, small insertions, and small deletions in multiple human cell types. Additionally, PINE-TREE demonstrated improved clonal cell editing efficiency in human induced pluripotent stem cells (hiPSCs). Most notably, PINE-TREE efficiently generated clonal isogenic hiPSCs harboring a mutation in the APOE gene for in vitro modeling of Alzheimer’s Disease. Collectively, results gathered from this study exhibited PINE-TREE as a valuable new tool in genetic engineering to accelerate the generation of clonal isogenic cell lines for applications in developmental biology, disease modeling, and drug screening.
ContributorsKostes, William Warner (Author) / Brafman, David (Thesis advisor) / Jacobs, Bertram (Committee member) / Lapinaite, Audrone (Committee member) / Tian, Xiaojun (Committee member) / Wang, Xiao (Committee member) / Arizona State University (Publisher)
Created2022
Description
Ecology has been an actively studied topic recently, along with the rapid development of human microbiota-based technology. Scientists have made remarkable progress using bioinformatics tools to identify species and analyze composition. However, a thorough understanding of interspecies interactions of microbial ecosystems is still lacking, which has been a significant obstacle in the further development of related technologies. In this work, a genetic circuit design principle with synthetic biology approaches is developed to form two-strain microbial consortia with different inter-strain interactions. The microbial systems are well-defined and inducible. Co-culture experiment results show that our microbial consortia behave consistently with previous ecological knowledge and thus serves as excellent model systems to simulate ecosystems with similar interactions. Colony patterns also emerge when co-culturing multiple species on solid media. With the engineered microbial consortia, image-processing based methods were developed to quantify the shape of co-culture colonies and distinguish microbial consortia with different interactions. Factors that affect the population ratios were identified through induction and variations in the inoculation process. Further time-lapse experiments revealed the basic rules of colony growth, composition variation, patterning, and how spatial factors impact the co-culture colony.
ContributorsChen, Xingwen (Author) / Wang, Xiao (Thesis advisor) / Kuang, Yang (Committee member) / Tian, Xiaojun (Committee member) / Brafman, David (Committee member) / Plaisier, Christopher (Committee member) / Arizona State University (Publisher)
Created2022
Description
As a rapidly evolving field, nucleic acid nanotechnology focuses on creating functional nanostructures or dynamic devices through harnessing the programmbility of nucleic acids including deoxyribonucleic acid (DNA) and ribonucleic acid (RNA), enabled by the predictable Watson-Crick base pairing. The precise control over the sequence and structure, along with the development of simulation softwares for the prediction of the experimental implementation provides the base of designing structures or devices with arbitrary topology and operational logic at nanoscale. Over the past 40 years, the thriving field has pushed the boundaries of nucleic acids, from originally biological macromolecules to functional building blocks with applications in biomedicine, molecular diagnostics and imaging, material science, electronics, crystallography, and more have emerged through programming the sequences and generating the various structures or devices. The underlying logic of nucleic acid programming is the base pairing rule, straightforward and robust. While for the complicated design of sequences and quantitative understanding of the programmed results, computational tools will markedly reduced the level of difficulty and even meet the challenge not available with manual effort. With this thesis three individual projects are presented, with all of them interweaving theory/computation and experiments. In a higher level abstraction, this dissertation covers the topic of biophysical understanding of the dynamic reactions, designing and realizing complex self-assembly systems and finally super-resolutional imaging. More specifically, Chapter 2 describes the study of RNA strand displacement kinetics with dedicated model extracting the reaction rates, providing guidelines for the rational design and regulation of the strand displacement reactions and eventually biochemical processes. In chapter 3 the platform for the design of complex symmetry of the self-assembly target and first experimental implementation of the assembly of pyrochlore lattices with DNA origamis are presented, which potentially can be applied to manipulate lights as optical materials. Chapter 4 focuses on the in solution characterization of the periodicity of DNA origami lattices with super-resolutional microscopy, with algorithms in development for three dimensional structural reconstruction.
ContributorsLiu, Hao (Author) / Yan, Hao (Thesis advisor) / Sulc, Petr (Thesis advisor) / Guo, Jia (Committee member) / Heyden, Matthias (Committee member) / Arizona State University (Publisher)
Created2023
Description
Molecular tessellation research aims to elucidate the underlying principles that govern intricate patterns in nature and to leverage these principles to create precise and ordered structures across multiple scales, thereby facilitating the emergence of novel functionalities. DNA origami technology enables the fabrication of nearly arbitrary DNA architectures with nanoscale precision, which can serve as excellent building blocks for the construction of tessellation patterns. However, the size and complexity of DNA origami tessellation systems are currently limited by several unexplored factors relevant to the accuracy of essential design parameters, the applicability of design strategies, and the compatibility between different tiles. Here, a general design and assembly method are described for creating DNA origami tiles that grow into tessellation patterns with micrometer-scale order and nanometer-scale precision. A critical design parameter, interhelical distance (D), was identified, which determined the conformation of monomer tiles and the outcome of tessellation. Finely tuned D facilitated the accurate geometric design of monomer tiles with minimized curvature and improved tessellation capability. To demonstrate the generality of the design method, 9 tile geometries and 15 unique tile designs were generated. The designed tiles were assembled into single-crystalline lattices ranging from tens to hundreds of square micrometers with micrometer-scale, nearly defect-free areas readily visualized by atomic force microscopy. Two strategies were applied to further increase the complexity of DNA origami tessellation, including reducing the symmetry of monomer tiles and co-assembling tiles of various geometries. The designed 6 complex tilings that includes 5 Archimedean tilings and a 12-fold quasicrystal tiling yielded various tiling patterns that great in size and quality, indicating the robustness of the optimized tessellation system. The described design and assembly approach can also be employed to create square DNA origami units for algorithmic self-assembly. As the square units assembled and expanded, they executed the binary function XOR, which generated the Sierpinski triangular pattern according to the predetermined instructions. This study will promote DNA-templated, programmable molecular and material patterning and open up new opportunities for applications in metamaterial engineering, nanoelectronics, and nanolithography.
ContributorsTang, Yue (Author) / Yan, Hao (Thesis advisor) / Guo, Jia (Committee member) / Stephanopoulos, Nicholas (Committee member) / Arizona State University (Publisher)
Created2023
Description
DNA and RNA are generally regarded as one of the central molecules in molecular biology. Recent advancements in the field of DNA/RNA nanotechnology witnessed the success of usage of DNA/RNA as programmable molecules to construct nano-objects with predefined shapes and dynamic molecular machines for various functions. From the perspective of structural design with nucleic acid, there are basically two types of assembly method, DNA tile based assembly and DNA origami based assembly, used to construct infinite-sized crystal structures and finite-sized molecular structures. The assembled structure can be used for arrangement of other molecules or nanoparticles with the resolution of nanometers to create new type of materials. The dynamic nucleic acid machine is based on the DNA strand displacement, which allows two nucleic acid strands to hybridize with each other to displace one or more prehybridized strands in the process. Strand displacement reaction has been implemented to construct a variety of dynamic molecular systems, such as molecular computer, oscillators, in vivo devices for gene expression control.
This thesis will focus on the computational design of structural and dynamic nucleic acid systems, particularly for new type of DNA structure design and high precision control of gene expression in vivo. Firstly, a new type of fundamental DNA structural motif, the layered-crossover motif, will be introduced. The layered-crossover allow non-parallel alignment of DNA helices with precisely controlled angle. By using the layered-crossover motif, the scaffold can go through the 3D framework DNA origami structures. The properties of precise angle control of the layered-crossover tiles can also be used to assemble 2D and 3D crystals. One the dynamic control part, a de-novo-designed riboregulator is developed that can recognize single nucleotide variation. The riboregulators can also be used to develop paper-based diagnostic devices.
This thesis will focus on the computational design of structural and dynamic nucleic acid systems, particularly for new type of DNA structure design and high precision control of gene expression in vivo. Firstly, a new type of fundamental DNA structural motif, the layered-crossover motif, will be introduced. The layered-crossover allow non-parallel alignment of DNA helices with precisely controlled angle. By using the layered-crossover motif, the scaffold can go through the 3D framework DNA origami structures. The properties of precise angle control of the layered-crossover tiles can also be used to assemble 2D and 3D crystals. One the dynamic control part, a de-novo-designed riboregulator is developed that can recognize single nucleotide variation. The riboregulators can also be used to develop paper-based diagnostic devices.
ContributorsHong, Fan, Ph. D (Author) / Yan, Hao (Thesis advisor) / Liu, Yan (Thesis advisor) / Green, Alexander A. (Committee member) / Borges, Chad (Committee member) / Arizona State University (Publisher)
Created2019