Theses and Dissertations
This collection includes both ASU Theses and Dissertations, submitted by graduate students, and the Barrett, Honors College theses submitted by undergraduate students.
Displaying 1 - 10 of 92
Description
I show that firms' ability to adjust variable capital in response to productivity shocks has important implications for the interpretation of the widely documented investment-cash flow sensitivities. The variable capital adjustment is sufficient for firms to capture small variations in profitability, but when the revision in profitability is relatively large, limited substitutability between the factors of production may call for fixed capital investment. Hence, firms with lower substitutability are more likely to invest in both factors together and have larger sensitivities of fixed capital investment to cash flow. By building a frictionless capital markets model that allows firms to optimize over fixed capital and inventories as substitutable factors, I establish the significance of the substitutability channel in explaining cross-sectional differences in cash flow sensitivities. Moreover, incorporating variable capital into firms' investment decisions helps explain the sharp decrease in cash flow sensitivities over the past decades. Empirical evidence confirms the model's predictions.
ContributorsKim, Kirak (Author) / Bates, Thomas (Thesis advisor) / Babenko, Ilona (Thesis advisor) / Hertzel, Michael (Committee member) / Tserlukevich, Yuri (Committee member) / Arizona State University (Publisher)
Created2013
Description
This research examines the current challenges of using Lamb wave interrogation methods to localize fatigue crack damage in a complex metallic structural component subjected to unknown temperatures. The goal of this work is to improve damage localization results for a structural component interrogated at an unknown temperature, by developing a probabilistic and reference-free framework for estimating Lamb wave velocities and the damage location. The methodology for damage localization at unknown temperatures includes the following key elements: i) a model that can describe the change in Lamb wave velocities with temperature; ii) the extension of an advanced time-frequency based signal processing technique for enhanced time-of-flight feature extraction from a dispersive signal; iii) the development of a Bayesian damage localization framework incorporating data association and sensor fusion. The technique requires no additional transducers to be installed on a structure, and allows for the estimation of both the temperature and the wave velocity in the component. Additionally, the framework of the algorithm allows it to function completely in an unsupervised manner by probabilistically accounting for all measurement origin uncertainty. The novel algorithm was experimentally validated using an aluminum lug joint with a growing fatigue crack. The lug joint was interrogated using piezoelectric transducers at multiple fatigue crack lengths, and at temperatures between 20°C and 80°C. The results showed that the algorithm could accurately predict the temperature and wave speed of the lug joint. The localization results for the fatigue damage were found to correlate well with the true locations at long crack lengths, but loss of accuracy was observed in localizing small cracks due to time-of-flight measurement errors. To validate the algorithm across a wider range of temperatures the electromechanically coupled LISA/SIM model was used to simulate the effects of temperatures. The numerical results showed that this approach would be capable of experimentally estimating the temperature and velocity in the lug joint for temperatures from -60°C to 150°C. The velocity estimation algorithm was found to significantly increase the accuracy of localization at temperatures above 120°C when error due to incorrect velocity selection begins to outweigh the error due to time-of-flight measurements.
ContributorsHensberry, Kevin (Author) / Chattopadhyay, Aditi (Thesis advisor) / Liu, Yongming (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Arizona State University (Publisher)
Created2013
Description
Aluminum alloys and their composites are attractive materials for applications requiring high strength-to-weight ratios and reasonable cost. Many of these applications, such as those in the aerospace industry, undergo fatigue loading. An understanding of the microstructural damage that occurs in these materials is critical in assessing their fatigue resistance. Two distinct experimental studies were performed to further the understanding of fatigue damage mechanisms in aluminum alloys and their composites, specifically fracture and plasticity. Fatigue resistance of metal matrix composites (MMCs) depends on many aspects of composite microstructure. Fatigue crack growth behavior is particularly dependent on the reinforcement characteristics and matrix microstructure. The goal of this work was to obtain a fundamental understanding of fatigue crack growth behavior in SiC particle-reinforced 2080 Al alloy composites. In situ X-ray synchrotron tomography was performed on two samples at low (R=0.1) and at high (R=0.6) R-ratios. The resulting reconstructed images were used to obtain three-dimensional (3D) rendering of the particles and fatigue crack. Behaviors of the particles and crack, as well as their interaction, were analyzed and quantified. Four-dimensional (4D) visual representations were constructed to aid in the overall understanding of damage evolution. During fatigue crack growth in ductile materials, a plastic zone is created in the region surrounding the crack tip. Knowledge of the plastic zone is important for the understanding of fatigue crack formation as well as subsequent growth behavior. The goal of this work was to quantify the 3D size and shape of the plastic zone in 7075 Al alloys. X-ray synchrotron tomography and Laue microdiffraction were used to non-destructively characterize the volume surrounding a fatigue crack tip. The precise 3D crack profile was segmented from the reconstructed tomography data. Depth-resolved Laue patterns were obtained using differential-aperture X-ray structural microscopy (DAXM), from which peak-broadening characteristics were quantified. Plasticity, as determined by the broadening of diffracted peaks, was mapped in 3D. Two-dimensional (2D) maps of plasticity were directly compared to the corresponding tomography slices. A 3D representation of the plastic zone surrounding the fatigue crack was generated by superimposing the mapped plasticity on the 3D crack profile.
ContributorsHruby, Peter (Author) / Chawla, Nikhilesh (Thesis advisor) / Solanki, Kiran (Committee member) / Liu, Yongming (Committee member) / Arizona State University (Publisher)
Created2014
Description
This research focuses on the benefits of using nanocomposites in aerospace structural components to prevent or delay the onset of unique composite failure modes, such as delamination. Analytical, numerical, and experimental analyses were conducted to provide a comprehensive understanding of how carbon nanotubes (CNTs) can provide additional structural integrity when they are used in specific hot spots within a structure. A multiscale approach was implemented to determine the mechanical and thermal properties of the nanocomposites, which were used in detailed finite element models (FEMs) to analyze interlaminar failures in T and Hat section stringers. The delamination that first occurs between the tow filler and the bondline between the stringer and skin was of particular interest. Both locations are considered to be hot spots in such structural components, and failures tend to initiate from these areas. In this research, nanocomposite use was investigated as an alternative to traditional methods of suppressing delamination. The stringer was analyzed under different loading conditions and assuming different structural defects. Initial damage, defined as the first drop in the load displacement curve was considered to be a useful variable to compare the different behaviors in this study and was detected via the virtual crack closure technique (VCCT) implemented in the FE analysis.
Experiments were conducted to test T section skin/stringer specimens under pull-off loading, replicating those used in composite panels as stiffeners. Two types of designs were considered: one using pure epoxy to fill the tow region and another that used nanocomposite with 5 wt. % CNTs. The response variable in the tests was the initial damage. Detailed analyses were conducted using FEMs to correlate with the experimental data. The correlation between both the experiment and model was satisfactory. Finally, the effects of thermal cure and temperature variation on nanocomposite structure behavior were studied, and both variables were determined to influence the nanocomposite structure performance.
Experiments were conducted to test T section skin/stringer specimens under pull-off loading, replicating those used in composite panels as stiffeners. Two types of designs were considered: one using pure epoxy to fill the tow region and another that used nanocomposite with 5 wt. % CNTs. The response variable in the tests was the initial damage. Detailed analyses were conducted using FEMs to correlate with the experimental data. The correlation between both the experiment and model was satisfactory. Finally, the effects of thermal cure and temperature variation on nanocomposite structure behavior were studied, and both variables were determined to influence the nanocomposite structure performance.
ContributorsHasan, Zeaid (Author) / Chattopadhyay, Aditi (Thesis advisor) / Dai, Lenore (Committee member) / Jiang, Hanqing (Committee member) / Rajadas, John (Committee member) / Liu, Yongming (Committee member) / Arizona State University (Publisher)
Created2014
Description
In this dissertation, the results of our comprehensive computational studies of disordered jammed (i.e., mechanically stable) packings of hard particles are presented, including the family of superdisks in 2D and ellipsoids in 3D Euclidean space. Following a very brief introduction to the hard-particle systems, the event driven molecular dynamics (EDMD) employed to generate the packing ensembles will be discussed. A large number of 2D packing configurations of superdisks are subsequently analyzed, through which a relatively accurate theoretical scheme for packing-fraction prediction based on local particle contact configurations is proposed and validated via additional numerical simulations. Moreover, the studies on binary ellipsoid packing in 3D are briefly discussed and the effects of different geometrical parameters on the final packing fraction are analyzed.
ContributorsXu, Yaopengxiao (Author) / Jiao, Yang (Thesis advisor) / Oswald, Jay (Committee member) / Liu, Yongming (Committee member) / Arizona State University (Publisher)
Created2014
Description
The focus of this investigation is on the formulation and a validation of reduced order models (ROMs) for the prediction of the response of structures with embedded piezoelectric actuators. The ROMs considered here are those constructed in a nonintrusive manner from a commercial finite element software, NASTRAN is adopted here. Notwithstanding the popularity of piezoelectric materials in structural dynamics related applications such as structural health monitoring and energy harvesting, not all commercial finite element software allow directly their modeling. In such cases, e.g., with NASTRAN, one can proceed with an analogy and replace the electric actuation in the piezoelectric material by a fictitious thermal effect producing the same strain. This process recasts the determination of a ROM for a structure with embedded piezoelectric actuator into a similar ROM but for a heated structure, the framework of which has recently been developed. Yet, the temperature field resulting from the analogy would be quite different from the one considered in past effort and would excite a broad array of structural modes. Accordingly, as a preamble to considering a beam with a piezoelectric layer, a simpler plate model is considered that is subjected to a uniform temperature but a complex pressure loading that excites the entire set of modes of the plate in the broad frequency band considered. The very good match of the predictions obtained by this ROM in comparison to their full finite element counterparts provides the necessary confidence to next address a beam with embedded piezoelectic actuator. The test model considered for this validation is a built-up nano beam analyzed recently in nonlinear geometric conditions by full finite elements and by a non-intrusive ROM procedure under harmonic variations of the piezoelectic voltage. This structural model and its loading conditions are very different from those considered in past applications of nonintrusive ROMs, thus the excellent results obtained here provide further support of the broad generality of the nonintrusive ROM methodology, including of the appropriateness of the "dual modes" basis functions.
ContributorsVyas, Varun (Author) / Mignolet, Marc (Thesis advisor) / Hollkamp, Joseph (Committee member) / Liu, Yongming (Committee member) / Arizona State University (Publisher)
Created2014
Description
I examine the determinants and implications of the level of director monitoring. I use the distance between directors' domiciles and firm headquarters as a proxy for the level of monitoring and the introduction of a new airline route between director domicile and firm HQ as an exogenous shock to the level of monitoring. I find a strong relation between distance and both board meeting attendance and director membership on strategic versus monitoring committees. Increased monitoring, as measured by a reduction in effective distance, by way of addition of a direct flight, is associated with a 3% reduction in firm value. A reduction in effective distance is also associated with less risk-taking, lower stock return volatility, lower accounting return volatility, lower R&D; spending, fewer acquisitions, and fewer patents.
ContributorsBennett, Benjamin (Author) / Coles, Jeffrey (Thesis advisor) / Hertzel, Michael (Committee member) / Babenka, Ilona (Committee member) / Custodio, Claudia (Committee member) / Arizona State University (Publisher)
Created2014
Description
This dissertation analyzes the reliability of reported employee stock option (ESO) expense, the determination of expected life of ESOs, motivations to manipulate ESO expense, and the impact of noise in ESO expense on subsequent stock price returns. Based on unique data, this is the first paper to measure average historical ESO life for all employees of a broad set of firms. I find average life has a mean of 4.12 years. Average life is reduced by 0.38 years per 10 percentage point increase in volatility, and industry effects explain an additional 7% of the variation. Reported expected life increases 0.37 years per year of historical life and an additional 0.16 years per year of age of the outstanding options. Deviations of reported volatility and life from benchmarks have positive correlations with deviations from own reporting history. Using stated assumptions rather than benchmark assumptions drops (increases) ESO expense by 8.3% (17.6%) for the 25th (75th) percentile firm. The change in earnings per share decreases (increases) by $0.019 ($0.007) for the 25th (75th) percentile firm. Tests for motivations to manipulate stock option expense downward have mixed results. Absolute values of deviations from benchmarks have a positive relationship with subsequent stock price volatility suggesting noise in reported stock option expense results in stock price noise. Deviations from benchmarks and subsequent cumulative abnormal returns have statistically significant results but are difficult to interpret.
ContributorsYoung, Brian (Author) / Coles, Jeffrey (Thesis advisor) / Hertzel, Michael (Committee member) / Babenko, Ilona (Committee member) / Arizona State University (Publisher)
Created2011
Description
In this dissertation, I examine the source of some of the anomalous capital market outcomes that have been documented for firms with high accruals. Chapter 2 develops and implements a methodology that decomposes a firm's discretionary accruals into a firm-specific and an industry-specific component. I use this decomposition to investigate which component drives the subsequent negative returns associated with firms with high discretionary accruals. My results suggest that these abnormal returns are driven by the firm-specific component of discretionary accruals. Moreover, although industry-specific discretionary accruals do not directly contribute towards this anomaly, I find that it is precisely when industry-specific discretionary accruals are high that firms with high firm-specific discretionary accruals subsequently earn these negative returns. While consistent with irrational mispricing or a rational risk premium associated with high discretionary accruals, these findings also support a transactions-cost based explanation for the accruals anomaly whereby search costs associated with distinguishing between value-relevant and manipulative discretionary accruals can induce investors to overlook potential earnings manipulation. Chapter 3 extends the decomposition to examine the role of firm-specific and industry-specific discretionary accruals in explaining the subsequent market underperformance and negative analysts' forecast errors documented for firms issuing equity. I examine the post-issue market returns and analysts' forecast errors for a sample of seasoned equity issues between 1975 and 2004 and find that offering-year firm-specific discretionary accruals can partially explain these anomalous capital market outcomes. Nonetheless, I find this predictive power of firm-specific accruals to be more pronounced for issues that occur during 1975 - 1989 compared to issues taking place between 1990 and 2004. Additionally, I find no evidence that investors and analysts are more overoptimistic about the prospects of issuers that have both high firm-specific and industry-specific discretionary accruals (compared to firms with high discretionary accruals in general). The results indicate no role for industry-specific discretionary accruals in explaining overoptimistic expectations from seasoned equity issues and suggest the importance of firm-specific factors in inducing earnings manipulation surrounding equity issues.
ContributorsIkram, Atif (Author) / Coles, Jeffrey (Thesis advisor) / Hertzel, Michael (Committee member) / Tserlukevich, Yuri (Committee member) / Arizona State University (Publisher)
Created2011
Description
Mutual monitoring in a well-structured authority system can mitigate the agency problem. I empirically examine whether the number 2 executive in a firm, if given authority, incentive, and channels for communication and influence, is able to monitor and constrain the potentially self-interested CEO. I find strong evidence that: (1) measures of the presence and extent of mutual monitoring from the No. 2 executive are positively related to future firm value (Tobin's Q); (2) the beneficial effect is more pronounced for firms with weaker corporate governance or CEO incentive alignment, with stronger incentives for the No. 2 executives to monitor, and with higher information asymmetry between the boards and the CEOs; (3) such mutual monitoring reduces the CEO's ability to pursue the "quiet life" but has no effect on "empire building;" and (4) mutual monitoring is a substitute for other governance mechanisms. The results suggest that mutual monitoring by a No. 2 executive provides checks and balances on CEO power.
ContributorsLi, Zhichuan (Author) / Coles, Jeffrey (Thesis advisor) / Hertzel, Michael (Committee member) / Bharath, Sreedhar (Committee member) / Babenko, Ilona (Committee member) / Arizona State University (Publisher)
Created2012