ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Filtering by
- Creators: Shen, Wei
- Creators: Rykaczewski, Konrad
ure of merit (zT) due to quantum connement eects. Improving the eciency of
thermoelectric devices allows for the development of better, more economical waste
heat recovery systems. Such systems may be used as bottoming or co-generation
cycles in conjunction with conventional power cycles to recover some of the wasted
heat. Thermal conductivity measurement systems are an important part of the char-
acterization processes of thermoelectric materials. These systems must possess the
capability of accurately measuring the thermal conductivity of both bulk and thin-lm
samples at dierent ambient temperatures.
This paper discusses the construction, validation, and improvement of a thermal
conductivity measurement platform based on the 3-Omega technique. Room temperature
measurements of thermal conductivity done on control samples with known properties
such as undoped bulk silicon (Si), bulk gallium arsenide (GaAs), and silicon dioxide
(SiO2) thin lms yielded 150 W=m􀀀K, 50 W=m􀀀K, and 1:46 W=m􀀀K respectively.
These quantities were all within 8% of literature values. In addition, the thermal
conductivity of bulk SiO2 was measured as a function of temperature in a Helium-
4 cryostat from 75K to 250K. The results showed good agreement with literature
values that all fell within the error range of each measurement. The uncertainty in
the measurements ranged from 19% at 75K to 30% at 250K. Finally, the system
was used to measure the room temperature thermal conductivity of a nanocomposite
composed of cadmium selenide, CdSe, nanocrystals in an indium selenide, In2Se3,
matrix as a function of the concentration of In2Se3. The observed trend was in
qualitative agreement with the expected behavior.
i
Next, a fundamental study is presented on the phase stability and solid-liquid transformation of metallic (In, Sn and Bi) colloidal nanocrystals. Although the phase change of nanoparticles has been a long-standing research topic, the melting behavior of colloidal nanocrytstals is largely unexplored. In addition, this study is of practical importance to nanocrystal-based applications that operate at elevated temperatures. Embedding colloidal nanocrystals into thermally-stable polymer matrices allows preserving nanocrystal size throughout melt-freeze cycles, and therefore enabling observation of stable melting features. Size-dependent melting temperature, melting enthalpy and melting entropy have all been measured and discussed.
In the next two chapters, focus has been switched to developing colloidal nanocrystal-based phase change composites for thermal energy storage applications. In Chapter 4, a polymer matrix phase change nanocomposite has been created. In this composite, the melting temperature and energy density could be independently controlled by tuning nanocrystal diameter and volume fractions. In Chapter 5, a solution-phase synthesis on metal matrix-metal nanocrytal composite is presented. This approach enables excellent morphological control over nanocrystals and demonstrated a phase change composite with a thermal conductivity 2 - 3 orders of magnitude greater than typical phase change materials, such as organics and molten salts.
In this research, the additive manufacturing technology and the heat exchanger design are explored to find a unique solution to improve the efficiency of heat exchangers. This includes creating a Triply Periodic Minimal Surface (TPMS) geometry, Schwarz-D in this case, using Mathematica with a flexibility to control the cell size of the models generated. This model is then encased in a closed cubical surface with manifolds for fluid inlets and outlets before 3D printed using the polymer nylon for thermal evaluation.
In the extent of this study, the heat exchanger developed is experimentally evaluated. The data obtained are used to derive a relationship between the heat transfer effectiveness and the Number of Transfer Units (NTU).The pressure loss across a fluid channel of the Schwarz D geometry is also studied.
The data presented in this study are part of initial experimental evaluation of 3D printed TPMS heat exchangers.Among heat exchangers with similar performance, the Schwarz D geometry is 32% smaller compared to a shell-and-tube heat exchanger.
that would otherwise exist only on paper. An excellent example of such designs
are the Triply Periodic Minimal Surface (TPMS) structures like Schwarz D, Schwarz
P, Gyroid, etc. These structures are self-sustaining, i.e. they require minimal supports
or no supports at all when 3D printed. These structures exist in stable form in
nature, like butterfly wings are made of Gyroids. Automotive and aerospace industry
have a growing demand for strong and light structures, which can be solved using
TPMS models. In this research we will try and understand some of the properties of
these Triply Periodic Minimal Surface (TPMS) structures and see how they perform
in comparison to the conventional models. The research was concentrated on the
mechanical, thermal and fluid flow properties of the Schwarz D, Gyroid and Spherical
Gyroid Triply Periodic Minimal Surface (TPMS) models in particular, other Triply
Periodic Minimal Surface (TPMS) models were not considered. A detailed finite
element analysis was performed on the mechanical and thermal properties using ANSYS
19.2 and the flow properties were analyzed using ANSYS Fluent under different
conditions.
One of the ways in which we can improve the efficiency of heat exchangers is by applying ultrasonic energy to a heat exchanger. This research explores the possibility of introducing the external input of ultrasonic energy to increase the efficiency of the heat exchanger. This increase in efficiency can be estimated by calculating the parameters important for the characterization of a heat exchanger, which are effectiveness (ε) and overall heat transfer coefficient (U). These parameters are calculated for both the non-ultrasound and ultrasound conditions in the heat exchanger.
This a preliminary study of ultrasound and its effect on a conventional shell-and-coil heat exchanger. From the data obtained it can be inferred that the increase in effectiveness and overall heat transfer coefficient upon the application of ultrasound is 1% and 6.22% respectively.
本研究聚焦冷链物流产业园金融服务助力冷链物流企业发展问题,主要研究内容包括:第一,基于产融结合理论,梳理冷链物流企业与产业园之间关系,从供需两侧探索冷链物流企业和产业园的金融服务的范围、类型和特点。第二,基于平台理论,构建冷链物流企业采纳产业园金融服务的研究模型,探索金融服务影响冷链物流企业的经营因素,分析冷链物流企业采纳产业园金融服务的因素和途径。第三,基于信息不对称理论,关切信息技术支持和知识分享在冷链物流企业采纳产业园提供金融服务过程中的调节作用。同时,梳理产业园提供金融服务可能面临哪些风险,制订冷链物流企业入驻园区的标准,防范风险。
本文运用实证研究方法,通过对国内18家冷链物流相关的产业园、物流园、冷链物流、商贸流通、金融等企业实地考察和专家访谈基础上,拟定问卷并对268家企业进行调查收集数据,使用结构方程模型进行假设检验。研究发现:金融服务的有形性、可靠性、移情性、经济性对冷链物流企业采纳产业园金融服务影响显著,而响应性的影响不显著。同时
信息技术支持和知识共享的调节作用不显著。最后,针对产业园吸引冷链物流企业提供金融服务、冷链物流企业采纳产业园金融服务的风险,提出防范策略措施。