ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Displaying 1 - 3 of 3
Filtering by
- Creators: Nemanich, Robert
Description
Gallium Nitride (GaN), being a wide-bandgap semiconductor, shows its advantage over the conventional semiconductors like Silicon and Gallium Arsenide for high temperature applications, especially in the temperature range from 300°C to 600°C. Development of stable ohmic contacts to GaN with low contact resistivity has been identified as a prerequisite to the success of GaN high temperature electronics. The focus of this work was primarily derived from the requirement of an appropriate metal contacts to work with GaN-based hybrid solar cell operating at high temperature.
Alloyed Ti/Al/Ni/Au contact and non-alloyed Al/Au contact were developed to form low-resistivity contacts to n-GaN and their stability at high temperature were studied. The alloyed Ti/Al/Ni/Au contact offered a specific contact resistivity (ρc) of 6×10-6 Ω·cm2 at room temperature measured the same as the temperature increased to 400°C. No significant change in ρc was observed after the contacts being subjected to 400°C, 450°C, 500°C, 550°C, and 600°C, respectively, for at least 4 hours in air. Since several device technology prefer non-alloyed contacts Al/Au metal stack was applied to form the contacts to n-type GaN. An initial ρc of 3×10-4 Ω·cm2, measured after deposition, was observed to continuously reduce under thermal stress at 400°C, 450°C, 500°C, 550°C, and 600°C, respectively, finally stabilizing at 5×10-6 Ω·cm2. Both the alloyed and non-alloyed metal contacts showed exceptional capability of stable operation at temperature as high as 600°C in air with low resistivity ~10-6 Ω·cm2, with ρc lowering for the non-alloyed contacts with high temperatures.
The p-GaN contacts showed remarkably superior ohmic behavior at elevated temperatures. Both ρc and sheet resistance (Rsh) of p-GaN decreased by a factor of 10 as the ambient temperature increased from room temperature to 390°C. The annealed Ni/Au contact showed ρc of 2×10-3 Ω·cm2 at room temperature, reduced to 1.6×10-4 Ω·cm2 at 390°C. No degradation was observed after the contacts being subjected to 450°C in air for 48 hours. Indium Tin Oxide (ITO) contacts, which has been widely used as current spreading layer in GaN-base optoelectronic devices, measured an initial ρc [the resistivity of the ITO/p-GaN interface, since the metal/ITO ρc is negligible] of 1×10-2 Ω·cm2 at room temperature. No degradation was observed after the contact being subjected to 450°C in air for 8 hours.
Accelerated life testing (ALT) was performed to further evaluate the contacts stability at high temperatures quantitatively. The ALT results showed that the annealed Ni/Au to p-GaN contacts is more stable in nitrogen ambient, with a lifetime of 2,628 hours at 450°C which is approximately 12 times longer than that at 450°C in air.
Alloyed Ti/Al/Ni/Au contact and non-alloyed Al/Au contact were developed to form low-resistivity contacts to n-GaN and their stability at high temperature were studied. The alloyed Ti/Al/Ni/Au contact offered a specific contact resistivity (ρc) of 6×10-6 Ω·cm2 at room temperature measured the same as the temperature increased to 400°C. No significant change in ρc was observed after the contacts being subjected to 400°C, 450°C, 500°C, 550°C, and 600°C, respectively, for at least 4 hours in air. Since several device technology prefer non-alloyed contacts Al/Au metal stack was applied to form the contacts to n-type GaN. An initial ρc of 3×10-4 Ω·cm2, measured after deposition, was observed to continuously reduce under thermal stress at 400°C, 450°C, 500°C, 550°C, and 600°C, respectively, finally stabilizing at 5×10-6 Ω·cm2. Both the alloyed and non-alloyed metal contacts showed exceptional capability of stable operation at temperature as high as 600°C in air with low resistivity ~10-6 Ω·cm2, with ρc lowering for the non-alloyed contacts with high temperatures.
The p-GaN contacts showed remarkably superior ohmic behavior at elevated temperatures. Both ρc and sheet resistance (Rsh) of p-GaN decreased by a factor of 10 as the ambient temperature increased from room temperature to 390°C. The annealed Ni/Au contact showed ρc of 2×10-3 Ω·cm2 at room temperature, reduced to 1.6×10-4 Ω·cm2 at 390°C. No degradation was observed after the contacts being subjected to 450°C in air for 48 hours. Indium Tin Oxide (ITO) contacts, which has been widely used as current spreading layer in GaN-base optoelectronic devices, measured an initial ρc [the resistivity of the ITO/p-GaN interface, since the metal/ITO ρc is negligible] of 1×10-2 Ω·cm2 at room temperature. No degradation was observed after the contact being subjected to 450°C in air for 8 hours.
Accelerated life testing (ALT) was performed to further evaluate the contacts stability at high temperatures quantitatively. The ALT results showed that the annealed Ni/Au to p-GaN contacts is more stable in nitrogen ambient, with a lifetime of 2,628 hours at 450°C which is approximately 12 times longer than that at 450°C in air.
ContributorsZhao, Shirong (Author) / Chowdhury, Srabanti (Thesis advisor) / Goodnick, Stephen (Committee member) / Zhao, Yuji (Committee member) / Nemanich, Robert (Committee member) / Arizona State University (Publisher)
Created2016
Description
Wide Bandgap (WBG) semiconductor materials are shaping day-to-day technologyby introducing powerful and more energy responsible devices. These materials have
opened the door for building basic semiconductor devices which are superior in terms of
handling high voltages, high currents, power, and temperature which is not possible using
conventional silicon technology. As the research continues in the field of WBG based
devices, there is a potential chance that the power electronics industry can save billions of
dollars deploying energy-efficient circuits in high power conversion electronics. Diamond,
silicon carbide and gallium nitride are the top three contenders among which diamond can
significantly outmatch others in a variety of properties. However, diamond technology is
still in its early phase of development and there are challenges involved in many aspects of
processing a successful integrated circuit. The work done in this research addresses three
major aspects of problems related to diamond technology. In the first part, the applicability
of compact modeling and Technology Computer-Aided Design (TCAD) modeling
technique for diamond Schottky p-i-n diodes has been demonstrated. The compact model
accurately predicts AC, DC and nonlinear behavior of the diode required for fast circuit
simulation. Secondly, achieving low resistance ohmic contact onto n-type diamond is one
of the major issues that is still an open research problem as it determines the performance
of high-power RF circuits and switching losses in power converters circuits. So, another
portion of this thesis demonstrates the achievement of very low resistance ohmic contact
(~ 10-4 Ω⋅cm2) onto n-type diamond using nano crystalline carbon interface layer. Using
the developed TCAD and compact models for low resistance contacts, circuit level
predictions show improvements in RF performance. Lastly, an initial study of breakdown
characteristics of diamond and cubic boron nitride heterostructure is presented. This study
serves as a first step for making future transistors using diamond and cubic boron nitride –
a very less explored material system in literature yet promising for extreme circuit
applications involving high power and temperature.
ContributorsJHA, VISHAL (Author) / Thornton, Trevor (Thesis advisor) / Goodnick, Stephen (Committee member) / Nemanich, Robert (Committee member) / Alford, Terry (Committee member) / Hoque, Mazhar (Committee member) / Arizona State University (Publisher)
Created2023
Description
Gallium Nitride (GaN) is uniquely suited for Radio Frequency (RF) and power electronic applications due to its intrinsically high saturation velocity and high mobility compared to Silicon and Silicon Carbide (SiC). High Electron Mobility Transistors (HEMTs) have remained the primary topology for GaN transistors in RF applications. However, GaN HEMTs suffer from a variety of issues such as current crowding, lack of enhancement mode (E-Mode) operation and non-linearity. These drawbacks slow the widespread adoption of GaN devices for ultra-low voltage (ULV) applications such as voltage regulators, automotive and computing applications. E-mode operation is especially desired in low-voltage high frequency switching applications. In this context, Fin Field Effect Transistors (FinFETs) offer an alternative topology for ULV applications as opposed to conventional HEMTs. Recent advances in material processing, high aspect ratio epitaxial growth and etching methods has led to an increased interest in 3D nanostructures such as Nano-FinFETs and Nanowire FETs. A typical 3D nano-FinFET is the AlGaN/GaN Metal Insulator Semiconductor (MIS) FET wherein a layer of Al2O3 surrounds the AlGaN/GaN fin. The presence of the side gates leads to additional lateral confinement of the 2D Electron Gas (2DEG). Theoretical calculations of transport properties in confined systems such as AlGaN/GaN Finfets are scarce compared to those of their planar HEMT counterparts.
A novel simulator is presented in this dissertation, which employs self-consistent solution of the coupled 1D Boltzmann – 2D Schrödinger – 3D Poisson problem, to yield the channel electrostatics and the low electric field transport characteristics of AlGaN/GaN MIS FinFETs. The low field electron mobility is determined by solving the Boltzmann transport equation in the Quasi-1D region using 1D Ensemble Monte Carlo method. Three electron-phonon scattering mechanisms (acoustic, piezoelectric and polar optical phonon scattering) and interface roughness scattering at the AlGaN/GaN interface are considered in this theoretical model. Simulated low-field electron mobility and its temperature dependence are in agreement with experimental data reported in the literature.
A quasi-1D version of alloy clustering model is derived and implemented and the limiting effect of alloy clustering on the low-field electron mobility is investigated for the first time for MIS FinFET device structures.
ContributorsKumar, Viswanathan Naveen (Author) / Vasileska, Dragica (Thesis advisor) / Goodnick, Stephen (Committee member) / Nemanich, Robert (Committee member) / Povolotskyi, Michael (Committee member) / Esqueda, Ivan Sanchez (Committee member) / Arizona State University (Publisher)
Created2022