ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Displaying 1 - 7 of 7
Filtering by
- All Subjects: chemical engineering
- Creators: Jin, Kailong
Description
There are limited analyses of the properties of segmented ionenes on the influence of the type, structure, content of soft/hard segments, and type of counterions through direct comparisons, which are needed for a diverse set of applications. This dissertation research focuses on resolving the gaps in the structure-property-function relationship of segmented ionenes. First, the synthesis of novel segmented ionenes using step-growth polymerization via the Menshutkin reaction of ditertiary amines and alkyl dihalides was performed with PEG soft segment with three different content of soft/hard segments, 25, 50, and 75 wt%, and two different hard segments, linear aliphatic and heterocyclic aliphatic hard segments. The content of the soft segment influenced the degree of phase separation and ionic aggregation which affected the thermomechanical properties of segmented ionenes. In addition, the crystallization of the soft segment influenced the mechanical properties of the ionenes. Second, the effect of the type of the soft segment was investigated by analyzing the novel PTMO-based segmented ionenes possessing three different content of soft/hard segments, as well as two different hard segments. The heterocyclic aliphatic hard segment provided a better degree of phase separation compared to the linear aliphatic hard segment irrespective of the type of soft segment, PEG, or PTMO. Moreover, the type and content of hard segments not only affected the thermal and mechanical properties but also the morphology of the segmented ionenes significantly that even inducing an ordered morphology. Third, the counter-anion metathesis was performed with PEG- and PTMO-based segmented ionenes possessing two structurally different hard segments to investigate the effect of the type of counter-anions with a direct comparison of the type of soft and hard segments. The type of counterion significantly influenced the thermomechanical properties of the segmented ionenes, and the degree of phase separation of different types of counter-anions was dependent on the type of soft and hard segments. The results of this dissertation provide fundamental insights into the correlations between each factor that influences the properties of the segmented ionenes and enable the design of segmented ionenes for a diverse range of applications.
ContributorsLee, Jae Sang (Author) / Green, Matthew (Thesis advisor) / Long, Timothy (Committee member) / Holloway, Julianne (Committee member) / Jin, Kailong (Committee member) / Seo, Soyoung (Committee member) / Arizona State University (Publisher)
Created2023
Description
In the search for ever more sustainable manufacturing techniques, additive manufacturing through light driven 3D printing processes is growing rapidly as a field, specifically the production of “living” materials which can be repaired and or reprocessed through the reactivation of polymer chain ends. Currently research in the production of these living materials is largely focused on radical polymerization methods. Cationic polymerizations have been developed for this purpose, although there is still much work to be done. This work seeks to explore a transition-metal free system to produce living materials through cationic reversible addition fragmentation chain-transfer (C-RAFT).Cationic polymerization is known for its rapid propagation. This is due to the highly reactive active center which also readily reacts with nucleophiles in unwanted chain transfer reactions. For this reason, reagents in living cationic polymerizations are subject to rigorous purification steps involving the distillation of monomer and solvent, freeze—pump—thaw cycles, and running the reaction under an inert environment1. These restrictions make living cationic polymerizations unattractive for 3D printing processes. New systems for rapid water tolerant C-RAFT photopolymerization will provide for new materials to be produced through this more sustainable manufacturing process.
In this work, living cationic polymerization of isobutyl vinyl ether (IBVE) is achieved using a synthesized cationic RAFT agent and an initiating system consisting of camphorquinone (CQ), ethyl 4-(dimethylamino)benzoate, and iodonium salt HNu-254. Molecular weights of 12 kg/mol are achieved with a dispersity of 1.4. The polymerization mechanism is probed and shows rapid kinetics consistent with living polymerizations in addition to photo-controllability as indicated by light on-off experiments. Chain extension experiments display re-activation of the trithiocarbonate chain end. This feature is then used to produce block-copolymers using ethyl vinyl ether and cyclohexyl vinyl ether.
ContributorsHawkins, Kade Denver (Author) / Seo, Eileen (Thesis advisor) / Long, Timothy (Committee member) / Jin, Kailong (Committee member) / Arizona State University (Publisher)
Created2023
Description
The excessive use of fossil fuels over the last few centuries has led to unprecedented changes in climate and a steady increase in the average surface global temperatures. Direct Air Capture(DAC) aims to capture CO2 directly from the atmosphere and alleviate some of the adverse effects of climate change. This dissertation focuses on methodologies to make advanced functional materials that show good potential to be used as DAC sorbents. Details on sorbent material synthesis and post-synthesis methods to obtain high surface area morphologies are described in detail. First, by incorporating K2CO3 into activated carbon (AC) fiber felts, the sorption kinetics was significantly improved by increasing the surface area of K2CO3 in contact with air. The AC-K2CO3 fiber composite felts are flexible, cheap, easy to manufacture, chemically stable, and show excellent DAC capacity and (de)sorption rates, with stable performance up to ten cycles. The best composite felts collected an average of 478 µmol of CO2 per gram of composite during 4 h of exposure to ambient (24% RH) air that had a CO2 concentration of 400-450 ppm over 10 cycles. Secondly, incorporating the amino acid L-arginine (L-Arg) into a poly(vinyl alcohol) (PVA) nanofiber support structure, created porous substrates with very high surface areas of L-Arg available for CO2 sorption. The bio-inspired PVA-Arg nanofiber composites are flexible and show excellent DAC performance compared to bulk L-Arg. The nanofiber composites are fabricated from an electrospinning process using an aqueous polymer solution. High ambient humidity levels improve sorption performance significantly. The best performing nanofiber composite collected 542 µmol of CO2 per gram of composite during 2 h of exposure to ambient, high humidity (100% RH) air that had a CO2 concentration of 400-450 ppm. Finally, poly(vinyl guanidine) (PVG) polymer was synthesized and tested for sorption performance. The fabrication of PVG nanofibers, divinyl benzene crosslinked PVG beads and glutaraldehyde crosslinked PVG were demonstrated. The sorption performance of the fabricated sorbents were tested with the glutaraldehyde crosslinked PVG having a dynamic sorption capacity of over 1 mmol of CO2 per gram of polymer in 3 h. The sorption capability of liquid PVG was also explored.
ContributorsModayil Korah, Mani (Author) / Green, Matthew D (Thesis advisor) / Lackner, Klaus (Committee member) / Long, Timothy E (Committee member) / Thomas, Marylaura L (Committee member) / Jin, Kailong (Committee member) / Arizona State University (Publisher)
Created2024
Description
Combining 3D bio-printing and drug delivery are promising techniques tofabricate scaffolds with well controlled and patient-specific structures for tissue
engineering. In this study, silk derivatives of bioink were developed consisting of
silk fibroin and gelatin then 3D printed into scaffolds. The scaffolds would be
evaluated for small molecule release, cell growth, degradation, and morphology.
Preparations and design of the scaffolds are major parts of engineering and tissue
engineering. Scaffolds are designed to mimic extracellular matrix by providing
structural support as well as promoting cell attachment and proliferation with
minimum inflammation while degrading at a controlled rate. Scaffolds offers new
potentials in medicine by aiding in the preparation of personalized and controlled
release therapeutic systems.
ContributorsNg, Johnny (Author) / Rege, Kaushal (Thesis advisor) / Holloway, Julianne (Committee member) / Jin, Kailong (Committee member) / Arizona State University (Publisher)
Created2022
Description
The objective of this research was to develop Aluminophosphate-five (AlPO4-5, AFI) zeolite adsorbents for efficient oxygen removal from a process stream to support an on-going Department of Energy (DOE) project on solar energy storage. A molecular simulation study predicted that substituted AlPO4-5 zeolite can adsorb O2 through a weak chemical bond at ambient temperature. Substituted AlPO4-5 zeolite was successfully synthesized via hydrothermal crystallization by following carefully designed procedures to tailor the zeolite for efficient O2 adsorption. Synthesized AlPO4-5 in this work included Sn/AlPO-5, Mo/AlPO-5, Pd/AlPO-5, Si/AlPO-5, Mn/AlPO-5, Ce/AlPO-5, Fe/AlPO-5, CuCe/AlPO-5, and MnSnSi/AlPO-5. While not all zeolite samples synthesized were fully characterized, selected zeolite samples were characterized by powder x-ray diffraction (XRD) for crystal structure confirmation and phase identification, and nitrogen adsorption for their pore textural properties. The Brunauer-Emmett-Teller (BET) specific surface area and pore size distribution were between 172 m2 /g - 306 m2 /g and 6Å - 9Å, respectively, for most of the zeolites synthesized. Samples of great interest to this project such as Sn/AlPO-5, Mo/AlPO-5 and MnSnSi/AlPO-5 were also characterized using x-ray photoelectron spectroscopy (XPS) and energy-dispersive x-ray spectroscopy (EDS) for elemental analysis, scanning electron microscopy (SEM) for morphology and particle size estimation, and electron paramagnetic resonance (EPR) for nature of adsorbed oxygen. Oxygen and nitrogen adsorption experiments were carried out in a 3-Flex adsorption apparatus (Micrometrics) at various temperatures (primarily at 25℃) to determine the adsorption properties of these zeolite samples as potential adsorbents for oxygen/nitrogen separation. Experiments showed that some of the zeolite samples adsorb little-to-no oxygen and nitrogen at 25℃, while other zeolites such as Sn/AlPO-5, Mo/AlPO-5, and MnSnSi/AlPO-5 adsorb decent but inconsistent amounts of oxygen with the highest observed values of about 0.47 mmol/ g, 0.56 mmol/g, and 0.84 mmol/ g respectively. The inconsistency in adsorption is currently attributed to non-uniform doping of the zeolites, and these findings validate that some substituted AlPO4-5 zeolites are promising adsorbents. However, more investigations are needed to verify the causes of this inconsistency to develop a successful AlPO4-5 zeolite-based adsorbent for oxygen/nitrogen separation.
ContributorsBuyinza, Allan Smith (Author) / Deng, Shuguang (Thesis advisor) / Varman, Arul M (Committee member) / Jin, Kailong (Committee member) / Arizona State University (Publisher)
Created2021
Description
The properties of block polymers (BPs) are intricately coupled to the dynamic and rich nature of the nanostructured assemblies which result from the phase separation between blocks. The introduction of strong secondary forces, such as electrostatics and hydrogen bonding, into block polymers greatly influences their self-assembly behavior, and therefore affects their physical and electrochemical properties often in non-trivial ways. The recent surge of work expanding scientific understanding of complex spherical packing in block polymers (BPs) has unlocked new design space for the development of advanced soft materials. The continuous matrix phase which percolates throughout spherical morphologies is ideal for many applications involving transport of ions or other small molecules. Thus, determining the accessible parameter range of such morphologies is desirable. Bulk zwitterion-containing BPs hold great potential within the realm of electroactive materials while remaining relatively untapped. In this work, architecturally and compositionally asymmetric diblock polymers were prepared with the majority block having zwitterions tethered to side chain termini at different ratios. Thermally reversible Frank-Kasper phases are observed in multiple samples with significant signs of kinetic arrest and influence. The kinetic influences are validated and described by the temperature-dependent static permittivity. Polyzwitterions combine the attractive features of zwitterions with the mechanical support and processability of polymeric materials. Among these attractive features is a potential for superior permittivity which is limited by the propensity of zwitterions to pack into strongly associating structures. Block polymer self-assembly embodies a plethora of packing frustration opportunities for optimizing polyzwitterion permittivity. The capabilities of this novel approach are revealed here, where the permittivity of a polyzwitterionic block is enhanced to a level comparable to that of pure liquid zwitterions near room temperature (εs ~ 250), but with less than a third the zwitterion concentration. The mechanistic source of permittivity enhancement from a single zwitterion-tethered block polymer is realized deductively through a series of thermal pathways and control sample experiments. Tethered zwitterions within the mixed block interface are frustrated when subject to segmental segregation under sufficient interfacial tension and packing while non-interfacial zwitterions contribute very little to permittivity, highlighting the potential for improvement by several fold.
ContributorsGrim, Bradley James (Author) / Green, Matthew (Thesis advisor) / Long, Timothy (Committee member) / Richert, Ranko (Committee member) / Jin, Kailong (Committee member) / Seo, S. Eileen (Committee member) / Arizona State University (Publisher)
Created2024
Description
Crystalline polymeric materials play an increasingly important role in daily life.Understanding and controlling the development of crystallinity is integral to improving the
performance of crystalline polymers in packaging, drug delivery, water treatment, gas
separations, and many other industries. Herein, fluorescence and Raman spectroscopy have
been applied for the first time to study the crystallinity of polymers, including traditional
semicrystalline thermoplastics and covalent organic frameworks (COFs; an emerging class
of crystalline polymers with highly ordered pore structures). On one hand, by incorporating
a fluorescent dye segment into a semicrystalline polymer matrix, it is feasible to accurately
monitor its crystallization and melting. The flexibility of dye incorporation allows for new
fundamental insights into polymer crystallization in the bulk and at/near interfaces that
may otherwise be out of reach for established techniques like differential scanning
calorimetry (DSC). On the other hand, Raman spectroscopy has been identified as a
technique sensitive to the crystallinity of COFs and applied alongside well-established
characterization techniques (X-ray diffraction and N2 adsorption) to monitor the
crystallization of COFs during synthesis. This has enabled careful control of COF
crystallinity during solvothermal synthesis for improved application in the field of drug
delivery. The monitoring of COF crystallinity has been extended to more complex film
geometries produced by interfacial polymerization. The high molecular sieving potential
of COFs remains out of reach in part due to a lack of understanding of the interplay between
crystallinity, crystallite orientation, and filtration performance. A careful study of these
relationships is suggested for future work to provide key insight toward applying COFs as
molecular sieving materials in water treatment and other separation applications.
ContributorsNile, Richard Gabriel (Author) / Jin, Kailong (Thesis advisor) / Lin, Jerry (Committee member) / Acharya, Abhinav (Committee member) / Seo, S. Eileen (Committee member) / Chen, Xiangfan (Committee member) / Arizona State University (Publisher)
Created2024