ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Displaying 101 - 110 of 111
Filtering by
- Creators: Kavazanjian, Edward
- Creators: Mobasher, Barzin
Description
Microbially induced desaturation (MID) via denitrification is an emerging ground improvement technique to mitigate liquefaction by stimulating the metabolic processes of native bacteria to produce biogas, biominerals and biomass. The production of biogenic gas gradually lowers the degree of saturation of treated soils, thereby dampening the pore pressure response to cyclic loading. However, the production of these metabolic products also alters the hydraulic and mechanical properties of the soil. A series of four tank tests simulating two-dimensional plane strain conditions were performed to evaluate the effectiveness of MID and the resulting changes to the hydraulic properties of the soils. Previous studies have demonstrated the mechanical response for treated homogenous granular soils at the bench scale via vertical injection methods. However, limited knowledge is available on the impact of partial desaturation on the hydraulic properties of the soil, particularly in stratified formations. Treating larger granular soil specimens via lateral injection methods is important for the up-scaling and future commercialization of the process as it may affect injection strategies, and the distribution of substrates and metabolic products. Tank tests were performed on a layered natural soil sediment collected from Richmond, British Columbia, Canada, as well as layered and unlayered laboratory grade Ottawa sands of different grain size distributions. The results demonstrated the effectiveness of treatment upon macro-scale soil properties, and showed how gas formation, migration and entrapment, and resulting degree of desaturation and hydraulic conductivity are affected by micro and macro-stratifications in granular soils.
ContributorsStallings Young, Elizabeth Grace (Author) / Zapata, Claudia E (Thesis advisor) / van Paassen, Leon A (Thesis advisor) / Kavazanjian, Edward (Committee member) / Arizona State University (Publisher)
Created2021
Description
Layer-wise extrusion of soft-solid like cement pastes and mortars is commonly used in 3D printing of concrete. Rheological and mechanical characterization of the printable binder for on-demand flow and subsequent structuration is a critical challenge. This research is an effort to understand the mechanics of cementitious binders as soft solids in the fresh state, towards establishing material-process relationships to enhance print quality. This study introduces 3D printable binders developed based on rotational and capillary rheology test parameters, and establish the direct influence of packing coefficients, geometric ratio, slip velocities, and critical print velocities on the extrudate quality. The ratio of packing fraction to the square of average particle diameter (0.01-0.02), and equivalent microstructural index (5-20) were suitable for printing, and were directly related to the cohesion and extrusional yield stress of the material. In fact, steady state pressure for printing (30-40 kPa) is proportional to the extrusional yield stress, and increases with the geometric ratio (0-60) and print velocity (5-50 mm/s). Higher print velocities results in higher wall shear stresses and was exponentially related to the slip layer thickness (estimated between 1-5μ), while the addition of superplasticizers improve the slip layer thickness and the extrudate flow. However, the steady state pressure and printer capacity limits the maximum print velocity while the deadzone length limits the minimum velocity allowable (critical velocity regime) for printing. The evolution of buildability with time for the fresh state mortars was characterized with digital image correlation using compressive strain and strain rate in printed layers. The fresh state characteristics (interlayer and interfilamentous) and process parameters (layer height and fiber dimensions) influence the hardened mechanical properties. A lower layer height generally improves the mechanical properties and slight addition of fiber (up to 0.3% by volume) results in a 15-30% increase in the mechanical properties. 3D scanning and point-cloud analysis was also used to assess the geometric tolerance of a print based on mean error distances, print accuracy index, and layer-wise percent overlap. The research output will contribute to a synergistic material-process design and development of test methods for printability in the context of 3D printing of concrete.
ContributorsAmbadi Omanakuttan Nair, Sooraj Kumar (Author) / Neithalath, Narayanan (Thesis advisor) / Rajan, Subramaniam (Committee member) / Mobasher, Barzin (Committee member) / Hoover, Christian (Committee member) / Chawla, Nikhilesh (Committee member) / Arizona State University (Publisher)
Created2021
Description
Composite materials have gained interest in the aerospace, mechanical and civil engineering industries due to their desirable properties - high specific strength and modulus, and superior resistance to fatigue. Design engineers greatly benefit from a reliable predictive tool that can calculate the deformations, strains, and stresses of composites under uniaxial and multiaxial states of loading including damage and failure predictions. Obtaining this information from (laboratory) experimental testing is costly, time consuming, and sometimes, impractical. On the other hand, numerical modeling of composite materials provides a tool (virtual testing) that can be used as a supplemental and an alternate procedure to obtain data that either cannot be readily obtained via experiments or is not possible with the currently available experimental setup. In this study, a unidirectional composite (Toray T800-F3900) is modeled at the constituent level using repeated unit cells (RUC) so as to obtain homogenized response all the way from the unloaded state up until failure (defined as complete loss of load carrying capacity). The RUC-based model is first calibrated and validated against the principal material direction laboratory tests involving unidirectional loading states. Subsequently, the models are subjected to multi-directional states of loading to generate a point cloud failure data under in-plane and out-of-plane biaxial loading conditions. Failure surfaces thus generated are plotted and compared against analytical failure theories. Results indicate that the developed process and framework can be used to generate a reliable failure prediction procedure that can possibly be used for a variety of composite systems.
ContributorsKatusele, Daniel Mutahwa (Author) / Rajan, Subramaniam (Thesis advisor) / Mobasher, Barzin (Committee member) / Neithalath, Narayanan (Committee member) / Arizona State University (Publisher)
Created2021
Description
Bridge scour at piers is a major problem for design and for maintaining old infrastructure. The current methods require their own upkeep and there may be better ways to mitigate scour. I looked to the mangrove forests of coastal environments for inspiration and have developed a 2D model to test the efficacy of placing a mangrove-root inspired system to mitigate scour. My model tests the hydrodynamics of the root systems, but there are additional benefits that can be used as bioinspiration in the future (altering the surrounding chemistry and mechanical properties of the soil).Adding a mangrove inspired minipile system to bridge piers changes scour parameters within my 2D COMSOL models. For the volume of material added, the minipiles compare favorably to larger sacrificial piles as they reduce A_wcz and 〖τ'〗_max by similar (or even better) amounts. These two parameters are indicators of scour in the field. Within the minipile experiments, it is more beneficial to place them upstream of the main bridge pier as their own ‘mangrove forest.’ The value of A_wcz and 〖τ'〗_max for complex 2D models of scour is unclear and physical experiments need to be performed. The model geometry is based on the dimensions of the experimental flume to be used in future studies and the model results have not yet been verified through experiments and field trials. Scale effects may be present which cannot be accounted for in the 2D models. Therefore future work should be conducted to test ‘mangrove forest’ minipile systems in 3D space, in flume experiments, and in field trials.
ContributorsEnns, Andrew Carl (Author) / van Paassen, Leon (Thesis advisor) / Tao, Junliang (Thesis advisor) / Kavazanjian, Edward (Committee member) / Arizona State University (Publisher)
Created2021
Description
Water is a vital resource, and its protection is a priority world-wide. One widespread threat to water quality is contamination by chlorinated solvents. These dry-cleaning and degreasing agents entered the watershed through spills and improper disposal and now are detected in 4% of U.S. aquifers and 4.5-18% of U.S. drinking water sources. The health effects of these contaminants can be severe, as they are associated with damage to the nervous, liver, kidney, and reproductive systems, developmental issues, and possibly cancer. Chlorinated solvents must be removed or transformed to improve water quality and protect human and environmental health. One remedy, bioaugmentation, the subsurface addition of microbial cultures able to transform contaminants, has been implemented successfully at hundreds of sites since the 1990s. Bioaugmentation uses the bacteria Dehalococcoides to transform chlorinated solvents with hydrogen, H2, as the electron donor. At advection limited sites, bioaugmentation can be combined with electrokinetics (EK-Bio) to enhance transport. However, challenges for successful bioremediation remain. In this work I addressed several knowledge gaps surrounding bioaugmentation and EK-Bio. I measured the H2 consuming capacity of soils, detailed the microbial metabolisms driving this demand, and evaluated how these finding relate to reductive dechlorination. I determined which reactions dominated at a contaminated site with mixed geochemistry treated with EK-Bio and compared it to traditional bioaugmentation. Lastly, I assessed the effect of EK-Bio on the microbial community at a field-scale site. Results showed the H2 consuming capacity of soils was greater than that predicted by initial measurements of inorganic electron acceptors and primarily driven by carbon-based microbial metabolisms. Other work demonstrated that, given the benefits of some carbon-based metabolisms to microbial reductive dechlorination, high levels of H2 consumption in soils are not necessarily indicative of hostile conditions for Dehalococcoides. Bench-scale experiments of EK-Bio under mixed geochemical conditions showed EK-Bio out-performed traditional bioaugmentation by facilitating biotic and abiotic transformations. Finally, results of microbial community analysis at a field-scale implementation of EK-Bio showed that while there were significant changes in alpha and beta diversity, the impact of EK-Bio on native microbial communities was minimal.
ContributorsAltizer, Megan Leigh (Author) / Torres, César I (Thesis advisor) / Krajmalnik-Brown, Rosa (Thesis advisor) / Rittmann, Bruce E (Committee member) / Kavazanjian, Edward (Committee member) / Delgado, Anca G (Committee member) / Arizona State University (Publisher)
Created2020
Description
Alkali-activated aluminosilicates, commonly known as "geopolymers", are being increasingly studied as a potential replacement for Portland cement. These binders use an alkaline activator, typically alkali silicates, alkali hydroxides or a combination of both along with a silica-and-alumina rich material, such as fly ash or slag, to form a final product with properties comparable to or better than those of ordinary Portland cement. The kinetics of alkali activation is highly dependent on the chemical composition of the binder material and the activator concentration. The influence of binder composition (slag, fly ash or both), different levels of alkalinity, expressed using the ratios of Na2O-to-binders (n) and activator SiO2-to-Na2O ratios (Ms), on the early age behavior in sodium silicate solution (waterglass) activated fly ash-slag blended systems is discussed in this thesis. Optimal binder composition and the n values are selected based on the setting times. Higher activator alkalinity (n value) is required when the amount of slag in the fly ash-slag blended mixtures is reduced. Isothermal calorimetry is performed to evaluate the early age hydration process and to understand the reaction kinetics of the alkali activated systems. The differences in the calorimetric signatures between waterglass activated slag and fly ash-slag blends facilitate an understanding of the impact of the binder composition on the reaction rates. Kinetic modeling is used to quantify the differences in reaction kinetics using the Exponential as well as the Knudsen method. The influence of temperature on the reaction kinetics of activated slag and fly ash-slag blends based on the hydration parameters are discussed. Very high compressive strengths can be obtained both at early ages as well as later ages (more than 70 MPa) with waterglass activated slag mortars. Compressive strength decreases with the increase in the fly ash content. A qualitative evidence of leaching is presented through the electrical conductivity changes in the saturating solution. The impact of leaching and the strength loss is found to be generally higher for the mixtures made using a higher activator Ms and a higher n value. Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) is used to obtain information about the reaction products.
ContributorsChithiraputhiran, Sundara Raman (Author) / Neithalath, Narayanan (Thesis advisor) / Rajan, Subramaniyam D (Committee member) / Mobasher, Barzin (Committee member) / Arizona State University (Publisher)
Created2012
Description
Microbially- and enzyme-induced carbonate precipitation (EICP and MICP) offer potentially sustainable and cost-effective mitigation methods for fugitive dust by forming an erosion-resistant crust on the soil through precipitation of a natural calcium carbonate (CaCO3) cement. While there have been isolated studies on the efficacy of the carbonate precipitation process, there are few systematic studies of the influence of the properties of the soil being treated (e.g., gradation, salt content) on the precipitation and the resulting wind erosion resistance. Moreover, the influence of environmental conditions on the durability of the crust formed by the induced carbonate precipitation has not been systematically investigated. In this research program, the efficacy and durability of EICP and MICP for dust mitigation were investigated for a variety of soil types and in different environmental conditions. Soil samples from seven sites with fugitive dust problems were treated with MICP or EICP and subjected to lab or field testing. The results of these tests showed that the effectiveness of biocementation treatment varies depending on the grain size distribution of soil and mineralogical composition. Testing on iron ore tailings materials demonstrated that treating by application of EICP solutions at lower concentrations (i.e., 0.5M and 0.75M of urea and calcium chloride) yielded effective results for poorly graded fine sand-sized tailings but the same solutions were ineffective for the well graded sand-sized tailings that contained large gravel-sized particles. Additionally, the application of MICP and EICP on sediments adjacent to a shrinking lake (the Salton Sea) with different salt contents exhibited enhanced performance in soils with lower salt content. The effect of temperature during deployment and precipitation cycles are shown to be significant environmental factors by simulating wetting-drying and freeze-thaw cycles in the laboratory. A dust-resistance crust formed through biocementation remained mostly intact after undergoing multiple cycles of wetting-drying. However, the durability of a dust-resistance crust formed through biocementation to multiple cycles of freeze-thaw depended on treatment solution concentration and soil grain size. Additionally, high temperature during field deployment of MICP adversely effected crust formation due to rapid evaporation that inhibited the complete hydrolysis of urea and the precipitation of carbonate.
ContributorsEhsasi, Farideh (Author) / Kavazanjian, Edward (Thesis advisor) / van Paassen, Leon (Committee member) / Khodadaditirkolaei, Hamed (Committee member) / Arizona State University (Publisher)
Created2023
Description
Some subterranean animals, such as mole-rats, can burrow underground, sense the environment around them, and communicate with each other. Inspired by the mole-rats, this dissertation is dedicated to developing an active wireless underground sensor network (WUSN) for active underground exploration. Special attention is paid to two key functions: wireless underground data transmission, and underground self-burrowing. In this study, a wireless underground communication system based on seismic waves was developed. The system includes a bio-inspired vibrational source, an accelerometer as the receiver, and a set of algorithms for encoding and decoding information. With the current design, a maximum transmission bit rate of 16–17 bits per second and a transmission distance of 80 cm is achieved. The transmission range is limited by the size of container used in the laboratory experiments. The bit error ratio is as low as 0.1%, demonstrating the robustness of the algorithms. The performance of the developed system shows that seismic waves produced by vibration can be used as an information carrier and can potentially be implemented in the active WUSNs. A minimalistic horizontal self-burrowing robot was designed. The robot mainly consists of a tip (flat, cone, or auger), and a pair of cylindrical parts. The robot can achieve extension-contraction with the utilization of a linear actuator and have options for tip rotation with an embedded gear motor. Using a combined numerical simulation and laboratory testing approach, symmetry-breaking is validated to be the key to underground burrowing. The resistance-displacement curves during the extension-contraction cycles of the robot can be used to quantify the overall effect of asymmetries and estimate the burrowing behavior of the robots. Findings from this research shed light on the future development of self-burrowing robots and active WUSNs.
ContributorsZhong, Yi (Author) / Tao, Junliang (Thesis advisor) / Kavazanjian, Edward (Committee member) / Martinez, Alejandro (Committee member) / Arizona State University (Publisher)
Created2023
Description
This Master's thesis presents an experimental testing program conducted to assess the properties of coarse tailings from two Arizona copper mine heap leach pads. This testing program was motivated by recent failures in tailings impoundments, which has prompted a re-evaluation of tailings deposit stability worldwide. The testing was conducted using a unique large-scale Direct-Simple Shear (LDSS) device at Arizona State University (ASU). Prior to testing the tailings, the LDSS device had to be rehabilitated, as it had not been used for several years. The testing program included one-dimensional compression testing, shear wave velocity measurement, and monotonic shearing under constant volume conditions. The test results demonstrate the effectiveness of the LDSS device in obtaining representative data for tailings under monotonic loading. Recommendations for future improvements of the LDSS include enhancing the connection of monitoring instruments, utilizing more sophisticated software for shear wave velocity measurements, and optimizing the control system. The thesis contributes to geotechnical engineering by improving understanding and evaluation of tailings properties, thereby enhancing safety and environmental sustainability in the mining industry.
ContributorsHarker, Jack Michael (Author) / Kavazanjian, Edward (Thesis advisor) / Zapata, Claudia (Committee member) / Razmi, Jafar (Committee member) / Arizona State University (Publisher)
Created2023
Description
Urease, an amidohydrolase, is an essential ingredient in the emerging engineering technique of biocementation. When free urease enzyme is used this carbonate precipitation process is often referred to as enzyme induced carbonate precipitation (EICP). To date, most engineering applications of EICP have used commercially available powdered urease. However, the high cost of commercially available urease is a major barrier to adoption of engineering applications of EICP in practice. The objective of this dissertation was to develop a simple and inexpensive enzyme production technique using agricultural resources. The specific objectives of this dissertation were (i) to develop a simple extraction process to obtain urease from common agricultural resources and identify a preferred agricultural resource for further study, (ii) to reduce the cost of enzyme production by eliminating the use of a buffer, centrifugation, and dehusking of the beans during the extraction process, (iii) investigate the stability of the extracted enzyme both in solution and after reduction to a powder by lyophilization (freeze-drying), and (iv) to study the kinetics of the extracted enzyme.
The results presented in this dissertation confirmed that inexpensive crude extracts of urease from agricultural products, including jack beans, soybeans, and watermelon seeds, are effective at catalyzing urea hydrolysis for carbonate precipitation. Based upon unit yield, jack beans were identified as the preferred agricultural resource for urease extraction. Results also showed that the jack bean extract retained its activity even after replacing the buffer with tap water and eliminating acetone fractionation, centrifugation, and dehusking. It was also found that the lyophilized crude extract maintained its activity during storage for at least one year and more effectively than either the crude extract solution or rehydrated commercial urease. The kinetics of the extracted enzyme was studied to gain greater insight into the optimum concentration of urea in engineering applications of EICP. Results showed higher values for the half-saturation coefficient of the crude extract compared to the commercial enzymes.
The results presented in this dissertation demonstrate the potential for a significant reduction in the cost of applying EICP in engineering practice by mass production of urease enzyme via a simple extraction process.
ContributorsJavadi, Neda (Author) / Kavazanjian, Edward (Thesis advisor) / Khodadadi Tirkolaei, Hamed (Committee member) / Hamadan, Naser (Committee member) / Delgado, Anca (Committee member) / Arizona State University (Publisher)
Created2021