ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Displaying 1 - 10 of 196
Filtering by
- Creators: Herrmann, Marcus
- Creators: Shen, Wei
- Creators: Gelderen, Elly van
Description
A new theoretical model was developed utilizing energy conservation methods in order to determine the fully-atomized cross-sectional Sauter mean diameters of pressure-swirl atomizers. A detailed boundary-layer assessment led to the development of a new viscous dissipation model for droplets in the spray. Integral momentum methods were also used to determine the complete velocity history of the droplets and entrained gas in the spray. The model was extensively validated through comparison with experiment and it was found that the model could predict the correct droplet size with high accuracy for a wide range of operating conditions. Based on detailed analysis, it was found that the energy model has a tendency to overestimate the droplet diameters for very low injection velocities, Weber numbers, and cone angles. A full parametric study was also performed in order to unveil some underlying behavior of pressure-swirl atomizers. It was found that at high injection velocities, the kinetic energy in the spray is significantly larger than the surface tension energy, therefore, efforts into improving atomization quality by changing the liquid's surface tension may not be the most productive. From the parametric studies it was also shown how the Sauter mean diameter and entrained velocities vary with increasing ambient gas density. Overall, the present energy model has the potential to provide quick and reasonably accurate solutions for a wide range of operating conditions enabling the user to determine how different injection parameters affect the spray quality.
ContributorsMoradi, Ali (Author) / Lee, Taewoo (Thesis advisor) / Herrmann, Marcus (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2013
Description
This study is about Thai English (ThaiE), a variety of World Englishes that is presently spoken in Thailand, as the result of the spread of English and the recent Thai government policies towards English communication in Thailand. In the study, I examined the linguistic data of spoken ThaiE, collected from multiple sources both in the U.S.A. and Thailand. The study made use of a qualitative approach in examining the data, which were from (i) English interviews and questionnaires with 12 highly educated Thai speakers of English during my fieldwork in the Southwestern U.S.A., Central Thailand, and Northeastern Thailand, (ii) English speech samples from the media in Thailand, i.e. television programs, a news report, and a talk radio program, and (iii) the research articles on English used by Thai speakers of English. This study describes the typology of ThaiE in terms of its morpho-syntax, phonology, and sociolinguistics, with the main focus being placed on the structural characteristics of ThaiE. Based on the data, the results show that some of the ThaiE features are similar to the World Englishes features, but some are unique to ThaiE. Therefore, I argue that ThaiE is structurally considered a new variety of World Englishes at the present time. The findings also showed an interesting result, regarding the notion of ThaiE by the fieldwork interview participants. The majority of these participants (n=6) denied the existence of ThaiE, while the minority of the participants (n=5) believed ThaiE existed, and one participant was reluctant to give the answer. The study suggested that the participants' academic backgrounds, the unfamiliar notion of ThaiE, and the level of the participants' social interaction with everyday persons may have influenced their answers to the main research question.
ContributorsRogers, Uthairat (Author) / Gelderen, Elly van (Thesis advisor) / Mailhammer, Robert (Committee member) / Adams, Karen (Committee member) / Arizona State University (Publisher)
Created2013
Description
The atomization of a liquid jet by a high speed cross-flowing gas has many applications such as gas turbines and augmentors. The mechanisms by which the liquid jet initially breaks up, however, are not well understood. Experimental studies suggest the dependence of spray properties on operating conditions and nozzle geom- etry. Detailed numerical simulations can offer better understanding of the underlying physical mechanisms that lead to the breakup of the injected liquid jet. In this work, detailed numerical simulation results of turbulent liquid jets injected into turbulent gaseous cross flows for different density ratios is presented. A finite volume, balanced force fractional step flow solver to solve the Navier-Stokes equations is employed and coupled to a Refined Level Set Grid method to follow the phase interface. To enable the simulation of atomization of high density ratio fluids, we ensure discrete consistency between the solution of the conservative momentum equation and the level set based continuity equation by employing the Consistent Rescaled Momentum Transport (CRMT) method. The impact of different inflow jet boundary conditions on different jet properties including jet penetration is analyzed and results are compared to those obtained experimentally by Brown & McDonell(2006). In addition, instability analysis is performed to find the most dominant insta- bility mechanism that causes the liquid jet to breakup. Linear instability analysis is achieved using linear theories for Rayleigh-Taylor and Kelvin- Helmholtz instabilities and non-linear analysis is performed using our flow solver with different inflow jet boundary conditions.
ContributorsGhods, Sina (Author) / Herrmann, Marcus (Thesis advisor) / Squires, Kyle (Committee member) / Chen, Kangping (Committee member) / Huang, Huei-Ping (Committee member) / Tang, Wenbo (Committee member) / Arizona State University (Publisher)
Created2013
Description
Despite the vast research on language carried out by the generative linguistics of Noam Chomsky and his followers since the 1950s, for theoretical reasons (mainly their attention to the mental abstraction of language structure rather than language as a performed product), historical linguistics from the start lay outside their research interest. This study is an attempt to bridge the gap between the formalism and theoretical constructs introduced by generative grammar, whose ultimate goal is to provide not only a description but also an explanation to linguistic phenomena, and historical linguistics, which studies the evolution of language over time. This main objective is met by providing a formal account of the changes hwæðer undergoes throughout the Old English (OE) period. This seemingly inconspicuous word presents itself as a case of particular investigative interest in that it reflects the different stages proclaimed by the theoretical assumptions implemented in the study, namely the economy principles responsible for what has become known as the CP cycle: the Head Preference Principle and the Late Merge Principle, whereby pronominal hwæðer would raise to the specifier position for topicalization purposes, then after frequent use in that position, it would be base-generated there under Late Merge, until later reanalysis as the head of the Complementizer Phrase (CP) under Head Preference. Thus, I set out to classify the diverse functions of OE hwæðer by identifying and analyzing all instances as recorded in the diachronic part of the Helsinki Corpus. Both quantitative and qualitative analyses of the data have rendered the following results: 1) a fully satisfactory functional and chronological classification has been obtained by analyzing the data under investigation following a formal theoretical approach; and 2) a step-by-step historical analysis proves to be indispensable for understanding how language works at the abstract level from a historical point of view. This project is part of a growing body of research on language change which attempts to describe and explain the evolution of certain words as these change in form and function.
ContributorsParra-Guinaldo, Víctor (Author) / Gelderen, Elly van (Thesis advisor) / Bjork, Robert (Committee member) / Nilsen, Don L. F. (Committee member) / Arizona State University (Publisher)
Created2013
Description
Linguistic subjectivity and subjectification are fields of research that are relatively new to those working in English linguistics. After a discussion of linguistic subjectivity and subjectification as they relate to English, I investigate the subjectification of a specific English adjective, and how its usage has changed over time. Subjectivity is held by many linguists of today to be the major governing factor behind the ordering of English prenominal adjectives. Through the use of a questionnaire, I investigate the effect of subjectivity on English prenominal adjective order from the perspective of the native English speaker. I then discuss the results of the questionnaire, what they mean in relation to how subjectivity affects that order, and a few of the patterns that emerged as I analyzed the data.
ContributorsSkarstedt, Luke (Author) / Gelderen, Elly van (Thesis advisor) / Bjork, Robert (Committee member) / Adams, Karen (Committee member) / Arizona State University (Publisher)
Created2013
Description
The heat transfer enhancements available from expanding the cross-section of a boiling microchannel are explored analytically and experimentally. Evaluation of the literature on critical heat flux in flow boiling and associated pressure drop behavior is presented with predictive critical heat flux (CHF) and pressure drop correlations. An optimum channel configuration allowing maximum CHF while reducing pressure drop is sought. A perturbation of the channel diameter is employed to examine CHF and pressure drop relationships from the literature with the aim of identifying those adequately general and suitable for use in a scenario with an expanding channel. Several CHF criteria are identified which predict an optimizable channel expansion, though many do not. Pressure drop relationships admit improvement with expansion, and no optimum presents itself. The relevant physical phenomena surrounding flow boiling pressure drop are considered, and a balance of dimensionless numbers is presented that may be of qualitative use. The design, fabrication, inspection, and experimental evaluation of four copper microchannel arrays of different channel expansion rates with R-134a refrigerant is presented. Optimum rates of expansion which maximize the critical heat flux are considered at multiple flow rates, and experimental results are presented demonstrating optima. The effect of expansion on the boiling number is considered, and experiments demonstrate that expansion produces a notable increase in the boiling number in the region explored, though no optima are observed. Significant decrease in the pressure drop across the evaporator is observed with the expanding channels, and no optima appear. Discussion of the significance of this finding is presented, along with possible avenues for future work.
ContributorsMiner, Mark (Author) / Phelan, Patrick E (Thesis advisor) / Baer, Steven (Committee member) / Chamberlin, Ralph (Committee member) / Chen, Kangping (Committee member) / Herrmann, Marcus (Committee member) / Arizona State University (Publisher)
Created2013
Description
The numerical climate models have provided scientists, policy makers and the general public, crucial information for climate projections since mid-20th century. An international effort to compare and validate the simulations of all major climate models is organized by the Coupled Model Intercomparison Project (CMIP), which has gone through several phases since 1995 with CMIP5 being the state of the art. In parallel, an organized effort to consolidate all observational data in the past century culminates in the creation of several "reanalysis" datasets that are considered the closest representation of the true observation. This study compared the climate variability and trend in the climate model simulations and observations on the timescales ranging from interannual to centennial. The analysis focused on the dynamic climate quantity of zonal-mean zonal wind and global atmospheric angular momentum (AAM), and incorporated multiple datasets from reanalysis and the most recent CMIP3 and CMIP5 archives. For the observation, the validation of AAM by the length-of-day (LOD) and the intercomparison of AAM revealed a good agreement among reanalyses on the interannual and the decadal-to-interdecadal timescales, respectively. But the most significant discrepancies among them are in the long-term mean and long-term trend. For the simulations, the CMIP5 models produced a significantly smaller bias and a narrower ensemble spread of the climatology and trend in the 20th century for AAM compared to CMIP3, while CMIP3 and CMIP5 simulations consistently produced a positive trend for the 20th and 21st century. Both CMIP3 and CMIP5 models produced a wide range of the magnitudes of decadal and interdecadal variability of wind component of AAM (MR) compared to observation. The ensemble means of CMIP3 and CMIP5 are not statistically distinguishable for either the 20th- or 21st-century runs. The in-house atmospheric general circulation model (AGCM) simulations forced by the sea surface temperature (SST) taken from the CMIP5 simulations as lower boundary conditions were carried out. The zonal wind and MR in the CMIP5 simulations are well simulated in the AGCM simulations. This confirmed SST as an important mediator in regulating the global atmospheric changes due to GHG effect.
ContributorsPaek, Houk (Author) / Huang, Huei-Ping (Thesis advisor) / Adrian, Ronald (Committee member) / Wang, Zhihua (Committee member) / Anderson, James (Committee member) / Herrmann, Marcus (Committee member) / Arizona State University (Publisher)
Created2013
Description
Increasing computational demands in data centers require facilities to operate at higher ambient temperatures and at higher power densities. Conventionally, data centers are cooled with electrically-driven vapor-compressor equipment. This paper proposes an alternative data center cooling architecture that is heat-driven. The source is heat produced by the computer equipment. This dissertation details experiments investigating the quantity and quality of heat that can be captured from a liquid-cooled microprocessor on a computer server blade from a data center. The experiments involve four liquid-cooling setups and associated heat-extraction, including a radical approach using mineral oil. The trials examine the feasibility of using the thermal energy from a CPU to drive a cooling process. Uniquely, the investigation establishes an interesting and useful relationship simultaneously among CPU temperatures, power, and utilization levels. In response to the system data, this project explores the heat, temperature and power effects of adding insulation, varying water flow, CPU loading, and varying the cold plate-to-CPU clamping pressure. The idea is to provide an optimal and steady range of temperatures necessary for a chiller to operate. Results indicate an increasing relationship among CPU temperature, power and utilization. Since the dissipated heat can be captured and removed from the system for reuse elsewhere, the need for electricity-consuming computer fans is eliminated. Thermocouple readings of CPU temperatures as high as 93°C and a calculated CPU thermal energy up to 67Wth show a sufficiently high temperature and thermal energy to serve as the input temperature and heat medium input to an absorption chiller. This dissertation performs a detailed analysis of the exergy of a processor and determines the maximum amount of energy utilizable for work. Exergy as a source of realizable work is separated into its two contributing constituents: thermal exergy and informational exergy. The informational exergy is that usable form of work contained within the most fundamental unit of information output by a switching device within a CPU. Exergetic thermal, informational and efficiency values are calculated and plotted for our particular CPU, showing how the datasheet standards compare with experimental values. The dissertation concludes with a discussion of the work's significance.
ContributorsHaywood, Anna (Author) / Phelan, Patrick E (Thesis advisor) / Herrmann, Marcus (Committee member) / Gupta, Sandeep (Committee member) / Trimble, Steve (Committee member) / Myhajlenko, Stefan (Committee member) / Arizona State University (Publisher)
Created2014
Description
The speech of non-native (L2) speakers of a language contains phonological rules that differentiate them from native speakers. These phonological rules characterize or distinguish accents in an L2. The Shibboleth program creates combinatorial rule-sets to describe the phonological pattern of these accents and classifies L2 speakers into their native language. The training and classification is done in Shibboleth by support vector machines using a Gaussian radial basis kernel. In one experiment run using Shibboleth, the program correctly identified the native language (L1) of a speaker of unknown origin 42% of the time when there were six possible L1s in which to classify the speaker. This rate is significantly better than the 17% chance classification rate. Chi-squared test (1, N=24) =10.800, p=.0010 In a second experiment, Shibboleth was not able to determine the native language family of a speaker of unknown origin at a rate better than chance (33-44%) when the L1 was not in the transcripts used for training the language family rule-set. Chi-squared test (1, N=18) =1.000, p=.3173 The 318 participants for both experiments were from the Speech Accent Archive (Weinberger, 2013), and ranged in age from 17 to 80 years old. Forty percent of the speakers were female and 60% were male. The factor that most influenced correct classification was higher age of onset for the L2. A higher number of years spent living in an English-speaking country did not have the expected positive effect on classification.
ContributorsFrost, Wende (Author) / Gelderen, Elly van (Thesis advisor) / Perzanowski, Dennis (Committee member) / Gee, Elisabeth (Committee member) / Arizona State University (Publisher)
Created2013
Description
The objective of this research is to develop methods for generating the Tolerance-Map for a line-profile that is specified by a designer to control the geometric profile shape of a surface. After development, the aim is to find one that can be easily implemented in computer software using existing libraries. Two methods were explored: the parametric modeling method and the decomposed modeling method. The Tolerance-Map (T-Map) is a hypothetical point-space, each point of which represents one geometric variation of a feature in its tolerance-zone. T-Maps have been produced for most of the tolerance classes that are used by designers, but, prior to the work of this project, the method of construction required considerable intuitive input, rather than being based primarily on automated computer tools. Tolerances on line-profiles are used to control cross-sectional shapes of parts, such as every cross-section of a mildly twisted compressor blade. Such tolerances constrain geometric manufacturing variations within a specified two-dimensional tolerance-zone. A single profile tolerance may be used to control position, orientation, and form of the cross-section. Four independent variables capture all of the profile deviations: two independent translations in the plane of the profile, one rotation in that plane, and the size-increment necessary to identify one of the allowable parallel profiles. For the selected method of generation, the line profile is decomposed into three types of segments, a primitive T-Map is produced for each segment, and finally the T-Maps from all the segments are combined to obtain the T-Map for the given profile. The types of segments are the (straight) line-segment, circular arc-segment, and the freeform-curve segment. The primitive T-Maps are generated analytically, and, for freeform-curves, they are built approximately with the aid of the computer. A deformation matrix is used to transform the primitive T-Maps to a single coordinate system for the whole profile. The T-Map for the whole line profile is generated by the Boolean intersection of the primitive T-Maps for the individual profile segments. This computer-implemented method can generate T-Maps for open profiles, closed ones, and those containing concave shapes.
ContributorsHe, Yifei (Author) / Davidson, Joseph (Thesis advisor) / Shah, Jami (Committee member) / Herrmann, Marcus (Committee member) / Arizona State University (Publisher)
Created2013