ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Displaying 1 - 10 of 176
Filtering by
- Creators: Shen, Wei
- Creators: Gelderen, Elly van
- Creators: Dai, Lenore
Description
Cancer is the second leading cause of death in the United States and novel methods of treating advanced malignancies are of high importance. Of these deaths, prostate cancer and breast cancer are the second most fatal carcinomas in men and women respectively, while pancreatic cancer is the fourth most fatal in both men and women. Developing new drugs for the treatment of cancer is both a slow and expensive process. It is estimated that it takes an average of 15 years and an expense of $800 million to bring a single new drug to the market. However, it is also estimated that nearly 40% of that cost could be avoided by finding alternative uses for drugs that have already been approved by the Food and Drug Administration (FDA). The research presented in this document describes the testing, identification, and mechanistic evaluation of novel methods for treating many human carcinomas using drugs previously approved by the FDA. A tissue culture plate-based screening of FDA approved drugs will identify compounds that can be used in combination with the protein TRAIL to induce apoptosis selectively in cancer cells. Identified leads will next be optimized using high-throughput microfluidic devices to determine the most effective treatment conditions. Finally, a rigorous mechanistic analysis will be conducted to understand how the FDA-approved drug mitoxantrone, sensitizes cancer cells to TRAIL-mediated apoptosis.
ContributorsTaylor, David (Author) / Rege, Kaushal (Thesis advisor) / Jayaraman, Arul (Committee member) / Nielsen, David (Committee member) / Kodibagkar, Vikram (Committee member) / Dai, Lenore (Committee member) / Arizona State University (Publisher)
Created2013
Description
This study is about Thai English (ThaiE), a variety of World Englishes that is presently spoken in Thailand, as the result of the spread of English and the recent Thai government policies towards English communication in Thailand. In the study, I examined the linguistic data of spoken ThaiE, collected from multiple sources both in the U.S.A. and Thailand. The study made use of a qualitative approach in examining the data, which were from (i) English interviews and questionnaires with 12 highly educated Thai speakers of English during my fieldwork in the Southwestern U.S.A., Central Thailand, and Northeastern Thailand, (ii) English speech samples from the media in Thailand, i.e. television programs, a news report, and a talk radio program, and (iii) the research articles on English used by Thai speakers of English. This study describes the typology of ThaiE in terms of its morpho-syntax, phonology, and sociolinguistics, with the main focus being placed on the structural characteristics of ThaiE. Based on the data, the results show that some of the ThaiE features are similar to the World Englishes features, but some are unique to ThaiE. Therefore, I argue that ThaiE is structurally considered a new variety of World Englishes at the present time. The findings also showed an interesting result, regarding the notion of ThaiE by the fieldwork interview participants. The majority of these participants (n=6) denied the existence of ThaiE, while the minority of the participants (n=5) believed ThaiE existed, and one participant was reluctant to give the answer. The study suggested that the participants' academic backgrounds, the unfamiliar notion of ThaiE, and the level of the participants' social interaction with everyday persons may have influenced their answers to the main research question.
ContributorsRogers, Uthairat (Author) / Gelderen, Elly van (Thesis advisor) / Mailhammer, Robert (Committee member) / Adams, Karen (Committee member) / Arizona State University (Publisher)
Created2013
Description
Despite the vast research on language carried out by the generative linguistics of Noam Chomsky and his followers since the 1950s, for theoretical reasons (mainly their attention to the mental abstraction of language structure rather than language as a performed product), historical linguistics from the start lay outside their research interest. This study is an attempt to bridge the gap between the formalism and theoretical constructs introduced by generative grammar, whose ultimate goal is to provide not only a description but also an explanation to linguistic phenomena, and historical linguistics, which studies the evolution of language over time. This main objective is met by providing a formal account of the changes hwæðer undergoes throughout the Old English (OE) period. This seemingly inconspicuous word presents itself as a case of particular investigative interest in that it reflects the different stages proclaimed by the theoretical assumptions implemented in the study, namely the economy principles responsible for what has become known as the CP cycle: the Head Preference Principle and the Late Merge Principle, whereby pronominal hwæðer would raise to the specifier position for topicalization purposes, then after frequent use in that position, it would be base-generated there under Late Merge, until later reanalysis as the head of the Complementizer Phrase (CP) under Head Preference. Thus, I set out to classify the diverse functions of OE hwæðer by identifying and analyzing all instances as recorded in the diachronic part of the Helsinki Corpus. Both quantitative and qualitative analyses of the data have rendered the following results: 1) a fully satisfactory functional and chronological classification has been obtained by analyzing the data under investigation following a formal theoretical approach; and 2) a step-by-step historical analysis proves to be indispensable for understanding how language works at the abstract level from a historical point of view. This project is part of a growing body of research on language change which attempts to describe and explain the evolution of certain words as these change in form and function.
ContributorsParra-Guinaldo, Víctor (Author) / Gelderen, Elly van (Thesis advisor) / Bjork, Robert (Committee member) / Nilsen, Don L. F. (Committee member) / Arizona State University (Publisher)
Created2013
Description
Linguistic subjectivity and subjectification are fields of research that are relatively new to those working in English linguistics. After a discussion of linguistic subjectivity and subjectification as they relate to English, I investigate the subjectification of a specific English adjective, and how its usage has changed over time. Subjectivity is held by many linguists of today to be the major governing factor behind the ordering of English prenominal adjectives. Through the use of a questionnaire, I investigate the effect of subjectivity on English prenominal adjective order from the perspective of the native English speaker. I then discuss the results of the questionnaire, what they mean in relation to how subjectivity affects that order, and a few of the patterns that emerged as I analyzed the data.
ContributorsSkarstedt, Luke (Author) / Gelderen, Elly van (Thesis advisor) / Bjork, Robert (Committee member) / Adams, Karen (Committee member) / Arizona State University (Publisher)
Created2013
Description
Although high performance, light-weight composites are increasingly being used in applications ranging from aircraft, rotorcraft, weapon systems and ground vehicles, the assurance of structural reliability remains a critical issue. In composites, damage is absorbed through various fracture processes, including fiber failure, matrix cracking and delamination. An important element in achieving reliable composite systems is a strong capability of assessing and inspecting physical damage of critical structural components. Installation of a robust Structural Health Monitoring (SHM) system would be very valuable in detecting the onset of composite failure. A number of major issues still require serious attention in connection with the research and development aspects of sensor-integrated reliable SHM systems for composite structures. In particular, the sensitivity of currently available sensor systems does not allow detection of micro level damage; this limits the capability of data driven SHM systems. As a fundamental layer in SHM, modeling can provide in-depth information on material and structural behavior for sensing and detection, as well as data for learning algorithms. This dissertation focusses on the development of a multiscale analysis framework, which is used to detect various forms of damage in complex composite structures. A generalized method of cells based micromechanics analysis, as implemented in NASA's MAC/GMC code, is used for the micro-level analysis. First, a baseline study of MAC/GMC is performed to determine the governing failure theories that best capture the damage progression. The deficiencies associated with various layups and loading conditions are addressed. In most micromechanics analysis, a representative unit cell (RUC) with a common fiber packing arrangement is used. The effect of variation in this arrangement within the RUC has been studied and results indicate this variation influences the macro-scale effective material properties and failure stresses. The developed model has been used to simulate impact damage in a composite beam and an airfoil structure. The model data was verified through active interrogation using piezoelectric sensors. The multiscale model was further extended to develop a coupled damage and wave attenuation model, which was used to study different damage states such as fiber-matrix debonding in composite structures with surface bonded piezoelectric sensors.
ContributorsMoncada, Albert (Author) / Chattopadhyay, Aditi (Thesis advisor) / Dai, Lenore (Committee member) / Papandreou-Suppappola, Antonia (Committee member) / Rajadas, John (Committee member) / Yekani Fard, Masoud (Committee member) / Arizona State University (Publisher)
Created2012
Description
The speech of non-native (L2) speakers of a language contains phonological rules that differentiate them from native speakers. These phonological rules characterize or distinguish accents in an L2. The Shibboleth program creates combinatorial rule-sets to describe the phonological pattern of these accents and classifies L2 speakers into their native language. The training and classification is done in Shibboleth by support vector machines using a Gaussian radial basis kernel. In one experiment run using Shibboleth, the program correctly identified the native language (L1) of a speaker of unknown origin 42% of the time when there were six possible L1s in which to classify the speaker. This rate is significantly better than the 17% chance classification rate. Chi-squared test (1, N=24) =10.800, p=.0010 In a second experiment, Shibboleth was not able to determine the native language family of a speaker of unknown origin at a rate better than chance (33-44%) when the L1 was not in the transcripts used for training the language family rule-set. Chi-squared test (1, N=18) =1.000, p=.3173 The 318 participants for both experiments were from the Speech Accent Archive (Weinberger, 2013), and ranged in age from 17 to 80 years old. Forty percent of the speakers were female and 60% were male. The factor that most influenced correct classification was higher age of onset for the L2. A higher number of years spent living in an English-speaking country did not have the expected positive effect on classification.
ContributorsFrost, Wende (Author) / Gelderen, Elly van (Thesis advisor) / Perzanowski, Dennis (Committee member) / Gee, Elisabeth (Committee member) / Arizona State University (Publisher)
Created2013
Description
This thesis presents approaches to develop micro seismometers and accelerometers based on molecular electronic transducers (MET) technology using MicroElectroMechanical Systems (MEMS) techniques. MET is a technology applied in seismic instrumentation that proves highly beneficial to planetary seismology. It consists of an electrochemical cell that senses the movement of liquid electrolyte between electrodes by converting it to the output current. MET seismometers have advantages of high sensitivity, low noise floor, small size, absence of fragile mechanical moving parts and independence on the direction of sensitivity axis. By using MEMS techniques, a micro MET seismometer is developed with inter-electrode spacing close to 1μm, which improves the sensitivity of fabricated device to above 3000 V/(m/s^2) under operating bias of 600 mV and input acceleration of 400 μG (G=9.81m/s^2) at 0.32 Hz. The lowered hydrodynamic resistance by increasing the number of channels improves the self-noise to -127 dB equivalent to 44 nG/√Hz at 1 Hz. An alternative approach to build the sensing element of MEMS MET seismometer using SOI process is also presented in this thesis. The significantly increased number of channels is expected to improve the noise performance. Inspired by the advantages of combining MET and MEMS technologies on the development of seismometer, a low frequency accelerometer utilizing MET technology with post-CMOS-compatible fabrication processes is developed. In the fabricated accelerometer, the complicated fabrication of mass-spring system in solid-state MEMS accelerometer is replaced with a much simpler post-CMOS-compatible process containing only deposition of a four-electrode MET structure on a planar substrate, and a liquid inertia mass of an electrolyte droplet encapsulated by oil film. The fabrication process does not involve focused ion beam milling which is used in the micro MET seismometer fabrication, thus the cost is lowered. Furthermore, the planar structure and the novel idea of using an oil film as the sealing diaphragm eliminate the complicated three-dimensional packaging of the seismometer. The fabricated device achieves 10.8 V/G sensitivity at 20 Hz with nearly flat response over the frequency range from 1 Hz to 50 Hz, and a low noise floor of 75 μG/√Hz at 20 Hz.
ContributorsHuang, Hai (Author) / Yu, Hongyu (Thesis advisor) / Jiang, Hanqing (Committee member) / Dai, Lenore (Committee member) / Si, Jennie (Committee member) / Arizona State University (Publisher)
Created2014
Description
Alzheimer's disease (AD) is the most common type of dementia, affecting one in nine people age 65 and older. One of the most important neuropathological characteristics of Alzheimer's disease is the aggregation and deposition of the protein beta-amyloid. Beta-amyloid is produced by proteolytic processing of the Amyloid Precursor Protein (APP). Production of beta-amyloid from APP is increased when cells are subject to stress since both APP and beta-secretase are upregulated by stress. An increased beta-amyloid level promotes aggregation of beta-amyloid into toxic species which cause an increase in reactive oxygen species (ROS) and a decrease in cell viability. Therefore reducing beta-amyloid generation is a promising method to control cell damage following stress. The goal of this thesis was to test the effect of inhibiting beta-amyloid production inside stressed AD cell model. Hydrogen peroxide was used as stressing agent. Two treatments were used to inhibit beta-amyloid production, including iBSec1, an scFv designed to block beta-secretase site of APP, and DIA10D, a bispecific tandem scFv engineered to cleave alpha-secretase site of APP and block beta-secretase site of APP. iBSec1 treatment was added extracellularly while DIA10D was stably expressed inside cell using PSECTAG vector. Increase in reactive oxygen species and decrease in cell viability were observed after addition of hydrogen peroxide to AD cell model. The increase in stress induced toxicity caused by addition of hydrogen peroxide was dramatically decreased by simultaneously treating the cells with iBSec1 or DIA10D to block the increase in beta-amyloid levels resulting from the upregulation of APP and beta-secretase.
ContributorsSuryadi, Vicky (Author) / Sierks, Michael (Thesis advisor) / Nielsen, David (Committee member) / Dai, Lenore (Committee member) / Arizona State University (Publisher)
Created2014
Description
ABSTRACT There are many parts of speech and morphological items in a linguistic lexicon that may be optional in order to have a cohesive language with a complete range of expression. Negation is not one of them. Negation appears to be absolutely essential from a linguistic (and indeed, a psychological) point of view within any human language. Humans need to be able to say in some fashion "No" and to express our not doing things in various ways. During the discussions that appear in this thesis, I expound upon the historical changes that can be seen within three different language branches - North Germanic (with Gothic, Old Saxon, Old Norse, Swedish, and Icelandic), West Germanic (with English), and Celtic (with Welsh) - focusing on negation particles in particular and their position within these languages. I also examine how each of these chosen languages has seen negation shift over time in relation to Jespersen's negation cycle. Finally, I compare and contrast the results I see from these languages, demonstrating that they all three do follow a distinct negation cycle. I also explain how these three negation cycles are chronologically not in sync with one another and obviously all changed at different rates. This appears to be the case even within the different branches of the Germanic family.
ContributorsLoewenhagen, Angela C (Author) / Gelderen, Elly van (Committee member) / Bjork, Robert (Committee member) / Gillon, Carrie (Committee member) / Arizona State University (Publisher)
Created2014
Description
This research focuses on the benefits of using nanocomposites in aerospace structural components to prevent or delay the onset of unique composite failure modes, such as delamination. Analytical, numerical, and experimental analyses were conducted to provide a comprehensive understanding of how carbon nanotubes (CNTs) can provide additional structural integrity when they are used in specific hot spots within a structure. A multiscale approach was implemented to determine the mechanical and thermal properties of the nanocomposites, which were used in detailed finite element models (FEMs) to analyze interlaminar failures in T and Hat section stringers. The delamination that first occurs between the tow filler and the bondline between the stringer and skin was of particular interest. Both locations are considered to be hot spots in such structural components, and failures tend to initiate from these areas. In this research, nanocomposite use was investigated as an alternative to traditional methods of suppressing delamination. The stringer was analyzed under different loading conditions and assuming different structural defects. Initial damage, defined as the first drop in the load displacement curve was considered to be a useful variable to compare the different behaviors in this study and was detected via the virtual crack closure technique (VCCT) implemented in the FE analysis.
Experiments were conducted to test T section skin/stringer specimens under pull-off loading, replicating those used in composite panels as stiffeners. Two types of designs were considered: one using pure epoxy to fill the tow region and another that used nanocomposite with 5 wt. % CNTs. The response variable in the tests was the initial damage. Detailed analyses were conducted using FEMs to correlate with the experimental data. The correlation between both the experiment and model was satisfactory. Finally, the effects of thermal cure and temperature variation on nanocomposite structure behavior were studied, and both variables were determined to influence the nanocomposite structure performance.
Experiments were conducted to test T section skin/stringer specimens under pull-off loading, replicating those used in composite panels as stiffeners. Two types of designs were considered: one using pure epoxy to fill the tow region and another that used nanocomposite with 5 wt. % CNTs. The response variable in the tests was the initial damage. Detailed analyses were conducted using FEMs to correlate with the experimental data. The correlation between both the experiment and model was satisfactory. Finally, the effects of thermal cure and temperature variation on nanocomposite structure behavior were studied, and both variables were determined to influence the nanocomposite structure performance.
ContributorsHasan, Zeaid (Author) / Chattopadhyay, Aditi (Thesis advisor) / Dai, Lenore (Committee member) / Jiang, Hanqing (Committee member) / Rajadas, John (Committee member) / Liu, Yongming (Committee member) / Arizona State University (Publisher)
Created2014