ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Displaying 1 - 4 of 4
Filtering by
- Creators: Li, Xiangjia
- Creators: Mobasher, Barzin
Description
High-temperature mechanical behaviors of metal alloys and underlying microstructural variations responsible for such behaviors are essential areas of interest for many industries, particularly for applications such as jet engines. Anisotropic grain structures, change of preferred grain orientation, and other transformations of grains occur both during metal powder bed fusion additive manufacturing processes, due to variation of thermal gradient and cooling rates, and afterward during different thermomechanical loads, which parts experience in their specific applications, could also impact its mechanical properties both at room and high temperatures. In this study, an in-depth analysis of how different microstructural features, such as crystallographic texture, grain size, grain boundary misorientation angles, and inherent defects, as byproducts of electron beam powder bed fusion (EB-PBF) AM process, impact its anisotropic mechanical behaviors and softening behaviors due to interacting mechanisms. Mechanical testing is conducted for EB-PBF Ti6Al4V parts made at different build orientations up to 600°C temperature. Microstructural analysis using electron backscattered diffraction (EBSD) is conducted on samples before and after mechanical testing to understand the interacting impact that temperature and mechanical load have on the activation of certain mechanisms. The vertical samples showed larger grain sizes, with an average of 6.6 µm, a lower average misorientation angle, and subsequently lower strength values than the other two horizontal samples. Among the three strong preferred grain orientations of the α phases, <1 1 2 ̅ 1> and <1 1 2 ̅ 0> were dominant in horizontally built samples, whereas the <0 0 0 1> was dominant in vertically built samples. Thus, strong microstructural variation, as observed among different EB-PBF Ti6Al4V samples, mainly resulted in anisotropic behaviors. Furthermore, alpha grain showed a significant increase in average grain size for all samples with the increasing test temperature, especially from 400°C to 600°C, indicating grain growth and coarsening as potential softening mechanisms along with temperature-induced possible dislocation motion. The severity of internal and external defects on fatigue strength has been evaluated non-destructively using quantitative methods, i.e., Murakami’s square root of area parameter model and Basquin’s model, and the external surface defects were rendered to be more critical as potential crack initiation sites.
ContributorsMian, Md Jamal (Author) / Ladani, Leila (Thesis advisor) / Razmi, Jafar (Committee member) / Shuaib, Abdelrahman (Committee member) / Mobasher, Barzin (Committee member) / Nian, Qiong (Committee member) / Arizona State University (Publisher)
Created2022
Description
Stereolithography (SLA) is an innovative additive manufacturing technique that has gained immense popularity in recent times due to its ability to produce complex and precise three-dimensional objects. However, the quality of the final product depends on the stability and homogeneity of the photocurable metallic ink used, which is crucial for manufacturing high-quality parts with good surface finish and higher density. To achieve homogeneity in the photocurable metallic resin, the study conducted on optimizing the printing ink for ultrafast layer less fabrication of 3D metal objects investigated the effectiveness of different dispersants such as KH 560, Triton X-100, BYK 2013, BYK 2030, and BYK 111. The use of dispersants plays a vital role in optimizing the ink and enhancing the surface finish and density of the final product. The rheology results showed that the appropriate dispersant has the potential to improve the properties of the printing ink and benefit the integrity of the printed green bodies and their surface finish. By using the optimized suspension, the study was able to fabricate parts with high metallic loading at an ultrafast speed using the Continuous Liquid Interface Production technique. FTIR analysis, sedimentation testing, and rheology study has been carried out which demonstrates the effects of the utilization of various dispersants optimally to improve the homogeneity and manufactured part’s integrity. Power law has been used to understand the viscosity behavior of dispersants in a photocurable ink with copper sulfate keeping the parameters such as shearing rate, stress, and torque intact. The microscopic images of the sintered parts showed high precision and an extremely smooth surface finish, which underscores the technique's potential to produce high-quality 3D metal objects. The solubility of dispersants significantly influenced the structural quality after washing and debinding processes. This study provides valuable information to design photocurable metallic suspensions for metal salts like copper sulfate pentahydrate.
ContributorsVerma, Harsh Pyarelal (Author) / Li, Xiangjia (Thesis advisor) / Nian, Qiong (Committee member) / Xie, Renxuan (Committee member) / Arizona State University (Publisher)
Created2023
Description
This dissertation is focused on the rheology scaling of metal particle reinforced polymermatrix composite made of solid and nanoporous metal powders to enable their
continuous 3D printing at high (>60vol%) metal content. There remained a specific
knowledge gap on how to predict successful extrusion with densely packed metals by
utilizing their suspension melt rheological properties. In the first project, the scaling of
the dynamic viscosity of melt-extrudate filaments made of Polylactic acid (PLA) and
gas-atomized solid NiCu powders was studied as a function of the metal’s volumetric
packing and feedstock pre-mixing strategies and correlated to its extrudability
performance, which fitted well with the Krieger-Dougherty analytical model. 63.4
vol% Filaments were produced by employing solution-mixing strategy to reduce
sintered part porosity and shrinkage. After sintering, the linear shrinkage dropped by
76% compared to the physical mixing. By characterizing metal particle reinforced
polymer matrix composite feedstock via flow-sweep rheology, a distinct extension of
shear-thinning towards high shear rates (i.e. 100 s-1) was observed at high metal content
– a result that was attributed to the improved wall adhesion. In comparison, physically mixed filament failed to sustain more than 10s-1 shear rate proving that they were prone
to wall slippage at a higher shear rate, giving an insight into the onset of extrusion
jamming. In the second project, nanoporous copper made out of electroless chemical
dealloying was utilized as fillers, because of their unique physiochemical properties.
The role of capillary imbibition of polymers into metal nanopores was investigated to
understand their effect on density, zero-shear viscosity, and shear thinning. It was
observed that, although the polymeric fluid’s transient concentration regulates its
wettability, the polymer chain length ultimately dictates its melt rheology, which consequentially facilitates densification of pores during vacuum annealing. Finally, it
was demonstrated that higher imbibition into nanopores leads to extrusion failure due
to a combined effect of volumetric packing increase and nanoconfinement, providing a
deterministic materials design tool to enable continuous 3D printing. The outcome of
this study might be beneficial to integrate nanoporous metals into binder-based 3D
printing technology to fabricate interdigitated battery electrodes and multifunctional 3D
printed electronics.
ContributorsHasib, Amm (Author) / Azeredo, Bruno (Thesis advisor) / Song, Kenan (Thesis advisor) / Nian, Qiong (Committee member) / Kwon, Beomjin (Committee member) / Li, Xiangjia (Committee member) / Arizona State University (Publisher)
Created2022
Description
Advancements in three-dimensional (3D) additive manufacturing techniques have opened up new possibilities for healthcare systems and the medical industry, allowing for the realization of concepts that were once confined to theoretical discussions. Among these groundbreaking research endeavors is the development of intricate magnetic structures that can be actuated through non-invasive methods, including electromagnetic and magnetic actuation. Magnetic actuation, in particular, offers the advantage of untethered operation. In this study, a photopolymerizable resin infused with Fe3O4 oxide nanoparticles is employed in the printing process using the micro-continuous liquid interface production technique. The objective is to optimize the manufacturing process to produce microstructures featuring smooth surfaces and reduced surface porosity, and enhanced flexibility and magnetic actuation. Various intricate structures are fabricated to validate the printing process's capabilities. Furthermore, the assessment of the flexibilty of these 3D-printed structures is conducted in the presence of an external magnetic field using a homemade bending test setup, allowing for a comprehensive characterization of these components. This research serves as a foundation for the future design and development of micro-robots using micro-continuous liquid interface production technique.
ContributorsJha, Ujjawal (Author) / Chen, Xiangfan (Thesis advisor) / Li, Xiangjia (Committee member) / Jin, Kailong (Committee member) / Nian, Qiong (Committee member) / Arizona State University (Publisher)
Created2023