ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Displaying 1 - 3 of 3
Filtering by
- Creators: Cao, Yu
Description
The first part describes Metal Semiconductor Field Effect Transistor (MESFET) based fundamental analog building blocks designed and fabricated in a single poly, 3-layer metal digital CMOS technology utilizing fully depletion mode MESFET devices. DC characteristics were measured by varying the power supply from 2.5V to 5.5V. The measured DC transfer curves of amplifiers show good agreement with the simulated ones with extracted models from the same process. The accuracy of the current mirror showing inverse operation is within ±15% for the current from 0 to 1.5mA with the power supply from 2.5 to 5.5V. The second part presents a low-power image recognition system with a novel MESFET device fabricated on a CMOS substrate. An analog image recognition system with power consumption of 2.4mW/cell and a response time of 6µs is designed, fabricated and characterized. The experimental results verified the accuracy of the extracted SPICE model of SOS MESFETs. The response times of 4µs and 6µs for one by four and one by eight arrays, respectively, are achieved with the line recognition. Each core cell for both arrays consumes only 2.4mW. The last part presents a CMOS low-power transceiver in MICS band is presented. The LNA core has an integrated mixer in a folded configuration. The baseband strip consists of a pseudo differential MOS-C band-pass filter achieving demodulation of 150kHz-offset BFSK signals. The SRO is used in a wakeup RX for the wake-up signal reception. The all digital frequency-locked loop drives a class AB power amplifier in a transmitter. The sensitivity of -85dBm in the wakeup RX is achieved with the power consumption of 320µW and 400µW at the data rates of 100kb/s and 200kb/s from 1.8V, respectively. The sensitivities of -70dBm and -98dBm in the data-link RX are achieved with NF of 40dB and 11dB at the data rate of 100kb/s while consuming only 600µW and 1.5mW at 1.2V and 1.8V, respectively.
ContributorsKim, Sung (Author) / Bakkaloglu, Bertan (Thesis advisor) / Christen, Jennifer Blain (Committee member) / Cao, Yu (Committee member) / Thornton, Trevor (Committee member) / Arizona State University (Publisher)
Created2011
Description
Test cost has become a significant portion of device cost and a bottleneck in high volume manufacturing. Increasing integration density and shrinking feature sizes increased test time/cost and reduce observability. Test engineers have to put a tremendous effort in order to maintain test cost within an acceptable budget. Unfortunately, there is not a single straightforward solution to the problem. Products that are tested have several application domains and distinct customer profiles. Some products are required to operate for long periods of time while others are required to be low cost and optimized for low cost. Multitude of constraints and goals make it impossible to find a single solution that work for all cases. Hence, test development/optimization is typically design/circuit dependent and even process specific. Therefore, test optimization cannot be performed using a single test approach, but necessitates a diversity of approaches. This works aims at addressing test cost minimization and test quality improvement at various levels. In the first chapter of the work, we investigate pre-silicon strategies, such as design for test and pre-silicon statistical simulation optimization. In the second chapter, we investigate efficient post-silicon test strategies, such as adaptive test, adaptive multi-site test, outlier analysis, and process shift detection/tracking.
ContributorsYilmaz, Ender (Author) / Ozev, Sule (Thesis advisor) / Bakkaloglu, Bertan (Committee member) / Cao, Yu (Committee member) / Christen, Jennifer Blain (Committee member) / Arizona State University (Publisher)
Created2012
Description
Coarse Grain Reconfigurable Arrays (CGRAs) are promising accelerators capable of
achieving high performance at low power consumption. While CGRAs can efficiently
accelerate loop kernels, accelerating loops with control flow (loops with if-then-else
structures) is quite challenging. Techniques that handle control flow execution in
CGRAs generally use predication. Such techniques execute both branches of an
if-then-else structure and select outcome of either branch to commit based on the
result of the conditional. This results in poor utilization of CGRA s computational
resources. Dual-issue scheme which is the state of the art technique for control flow
fetches instructions from both paths of the branch and selects one to execute at
runtime based on the result of the conditional. This technique has an overhead in
instruction fetch bandwidth. In this thesis, to improve performance of control flow
execution in CGRAs, I propose a solution in which the result of the conditional
expression that decides the branch outcome is communicated to the instruction fetch
unit to selectively issue instructions from the path taken by the branch at run time.
Experimental results show that my solution can achieve 34.6% better performance
and 52.1% improvement in energy efficiency on an average compared to state of the
art dual issue scheme without imposing any overhead in instruction fetch bandwidth.
achieving high performance at low power consumption. While CGRAs can efficiently
accelerate loop kernels, accelerating loops with control flow (loops with if-then-else
structures) is quite challenging. Techniques that handle control flow execution in
CGRAs generally use predication. Such techniques execute both branches of an
if-then-else structure and select outcome of either branch to commit based on the
result of the conditional. This results in poor utilization of CGRA s computational
resources. Dual-issue scheme which is the state of the art technique for control flow
fetches instructions from both paths of the branch and selects one to execute at
runtime based on the result of the conditional. This technique has an overhead in
instruction fetch bandwidth. In this thesis, to improve performance of control flow
execution in CGRAs, I propose a solution in which the result of the conditional
expression that decides the branch outcome is communicated to the instruction fetch
unit to selectively issue instructions from the path taken by the branch at run time.
Experimental results show that my solution can achieve 34.6% better performance
and 52.1% improvement in energy efficiency on an average compared to state of the
art dual issue scheme without imposing any overhead in instruction fetch bandwidth.
ContributorsRajendran Radhika, Shri Hari (Author) / Shrivastava, Aviral (Thesis advisor) / Christen, Jennifer Blain (Committee member) / Cao, Yu (Committee member) / Arizona State University (Publisher)
Created2014