ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Displaying 1 - 3 of 3
Filtering by
- All Subjects: Alternative Energy
- Creators: Qin, Jiangchao
- Creators: Calvo Martinez, Diana Carolina
Description
With the increasing penetration of Photovoltaic inverters, there is a necessity for recent PV inverters to have smart grid support features for increased power system reliability and security. The grid support features include voltage support, active and reactive power control. These support features mean that inverters should have bidirectional power and communication capabilities. The inverter should be able to communicate with the grid utility and other inverter modules.
This thesis studies the real time simulation of smart inverters using PLECS Real Time Box. The real time simulation is performed as a Controller Hardware in the Loop (CHIL) real time simulation. In this thesis, the power stage of the smart inverter is emulated in the PLECS Real Time Box and the controller stage of the inverter is programmed in the Digital Signal Processor (DSP) connected to the real time box. The power stage emulated in the real time box and the controller implemented in the DSP form a closed loop smart inverter.
This smart inverter, with power stage and controller together, is then connected to an OPAL-RT simulator which emulates the power distribution system of the Arizona State University Poly campus. The smart inverter then sends and receives commands to supply power and support the grid. The results of the smart inverter with the PLECS Real time box and the smart inverter connected to an emulated distribution system are discussed under various conditions based on the commands received by the smart inverter.
This thesis studies the real time simulation of smart inverters using PLECS Real Time Box. The real time simulation is performed as a Controller Hardware in the Loop (CHIL) real time simulation. In this thesis, the power stage of the smart inverter is emulated in the PLECS Real Time Box and the controller stage of the inverter is programmed in the Digital Signal Processor (DSP) connected to the real time box. The power stage emulated in the real time box and the controller implemented in the DSP form a closed loop smart inverter.
This smart inverter, with power stage and controller together, is then connected to an OPAL-RT simulator which emulates the power distribution system of the Arizona State University Poly campus. The smart inverter then sends and receives commands to supply power and support the grid. The results of the smart inverter with the PLECS Real time box and the smart inverter connected to an emulated distribution system are discussed under various conditions based on the commands received by the smart inverter.
ContributorsThiagarajan, Ramanathan (Author) / Ayyanar, Raja (Thesis advisor) / Lei, Qin (Committee member) / Qin, Jiangchao (Committee member) / Arizona State University (Publisher)
Created2017
Description
The increasing concentrations of greenhouse gases into the atmosphere call for urgent measures to use non-fossil feedstock for fuels and chemicals. Synthesis gas (or syngas) is a mixture of three gases: hydrogen (H2), carbon monoxide (CO), and carbon dioxide (CO2). Syngas already is widely used as a non-fossil fuel and a building block for a variety of chemicals using the Fischer-Tropsch process. Recently, syngas fermentation has attracted attention as a more sustainable way for the conversion of syngas to chemicals, since its biocatalysts are self-generating, are resilient, and can utilize a wide range of syngas compositions. However, syngas fermentation has technical and economic limitations. This dissertation, by contributing to the understanding of syngas fermentation, helps to overcome the limitations. A bibliometric analysis showed the topic’s landscape and identified that mass transfer is the biggest challenge for the process. One means to improve syngas mass transfer is to use the membrane biofilm reactor, or MBfR, to deliver syngas to the microorganisms. MBfR experiments delivering pure H2 demonstrated that the H2:IC ratio (IC is inorganic carbon) controlled the overall production rate of organic compounds and their carbon-chain length. Organic chemicals up to eight carbons could be produced with a high H2:IC ratio. A novel asymmetric membrane dramatically improved mass transfer rates for all syngas components, and its low selectivity among them made it ideal for high-rate syngas fermentation. MBfR experiments using syngas and the asymmetric membrane, as well as a conventional symmetric membrane, confirmed that the key parameter for generating long-chain products was a high H2:IC ratio. The fast mass transfer rate of the asymmetric membrane allowed a very high areal production rate of acetate: 253 g.m-2.d-1, the highest reported to date. Since the membrane delivered H2 and C from the syngas feed, the relatively low selectivity of the asymmetric membrane favored acetogenesis over microbial chain elongation. A techno-economic analysis of the MBfR showed that the cost to produce acetate was less than its market price. All results presented in this dissertation support the potential of syngas fermentation using the MBfR as a means to produce commodity chemicals and biofuels from syngas.
ContributorsCalvo Martinez, Diana Carolina (Author) / Rittmann, Bruce E (Thesis advisor) / Torres, César I (Thesis advisor) / Kralmajnik-Brown, Rosa (Committee member) / Arizona State University (Publisher)
Created2021
Description
With the increasing penetration of converter interfaced renewable generation into power systems, the structure and behavior of the power system is changing, catalyzing alterations and enhancements in modeling and simulation methods.
This work puts forth a Hybrid Electromagnetic Transient-Transient Stability simulation method implemented using MATLAB and Simulink, to study power electronic based power systems. Hybrid Simulation enables detailed, accurate modeling, along with fast, efficient simulation, on account of the Electromagnetic Transient (EMT) and Transient Stability (TS) simulations respectively. A critical component of hybrid simulation is the interaction between the EMT and TS simulators, established through a well-defined interface technique, which has been explored in detail.
This research focuses on the boundary conditions and interaction between the two simulation models for optimum accuracy and computational efficiency.
A case study has been carried out employing the proposed hybrid simulation method. The test case used is the IEEE 9-bus system, modified to integrate it with a solar PV plant. The validation of the hybrid model with the benchmark full EMT model, along with the analysis of the accuracy and efficiency, has been performed. The steady-state and transient analysis results demonstrate that the performance of the hybrid simulation method is competent. The hybrid simulation technique suitably captures accuracy of EMT simulation and efficiency of TS simulation, therefore adequately representing the behavior of power systems with high penetration of converter interfaced generation.
This work puts forth a Hybrid Electromagnetic Transient-Transient Stability simulation method implemented using MATLAB and Simulink, to study power electronic based power systems. Hybrid Simulation enables detailed, accurate modeling, along with fast, efficient simulation, on account of the Electromagnetic Transient (EMT) and Transient Stability (TS) simulations respectively. A critical component of hybrid simulation is the interaction between the EMT and TS simulators, established through a well-defined interface technique, which has been explored in detail.
This research focuses on the boundary conditions and interaction between the two simulation models for optimum accuracy and computational efficiency.
A case study has been carried out employing the proposed hybrid simulation method. The test case used is the IEEE 9-bus system, modified to integrate it with a solar PV plant. The validation of the hybrid model with the benchmark full EMT model, along with the analysis of the accuracy and efficiency, has been performed. The steady-state and transient analysis results demonstrate that the performance of the hybrid simulation method is competent. The hybrid simulation technique suitably captures accuracy of EMT simulation and efficiency of TS simulation, therefore adequately representing the behavior of power systems with high penetration of converter interfaced generation.
ContributorsAthaide, Denise Maria Christine (Author) / Qin, Jiangchao (Thesis advisor) / Ayyanar, Raja (Committee member) / Wu, Meng (Committee member) / Arizona State University (Publisher)
Created2018