ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Displaying 1 - 3 of 3
Filtering by
- All Subjects: Control
- All Subjects: Nonlinear simulation
Description
This report provides an overview of scramjet-powered hypersonic vehicle modeling and control challenges. Such vehicles are characterized by unstable non-minimum phase dynamics with significant coupling and low thrust margins. Recent trends in hypersonic vehicle research are summarized. To illustrate control relevant design issues and tradeoffs, a generic nonlinear 3DOF longitudinal dynamics model capturing aero-elastic-propulsive interactions for wedge-shaped vehicle is used. Limitations of the model are discussed and numerous modifications have been made to address control relevant needs. Two different baseline configurations are examined over a two-stage to orbit ascent trajectory. The report highlights how vehicle level-flight static (trim) and dynamic properties change over the trajectory. Thermal choking constraints are imposed on control system design as a direct consequence of having a finite FER margin. The implication of this state-dependent nonlinear FER margin constraint, the right half plane (RHP) zero, and lightly damped flexible modes, on control system bandwidth (BW) and FPA tracking has been discussed. A control methodology has been proposed that addresses the above dynamics while providing some robustness to modeling uncertainty. Vehicle closure (the ability to fly a trajectory segment subject to constraints) is provided through a proposed vehicle design methodology. The design method attempts to use open loop metrics whenever possible to design the vehicle. The design method is applied to a vehicle/control law closed loop nonlinear simulation for validation. The 3DOF longitudinal modeling results are validated against a newly released NASA 6DOF code.
ContributorsDickeson, Jeffrey James (Author) / Rodriguez, Armando A (Thesis advisor) / Tsakalis, Konstantinos (Committee member) / Si, Jennie (Committee member) / Wells, Valana (Committee member) / Kawski, Mattias (Committee member) / Arizona State University (Publisher)
Created2012
Description
This thesis addresses the design and control of three phase inverters. Such inverters are
used to produce three-phase sinusoidal voltages and currents from a DC source. They
are critical for injecting power from renewable energy sources into the grid. This is
especially true since many of these sources of energy are DC sources (e.g. solar
photovoltaic) or need to be stored in DC batteries because they are intermittent (e.g. wind
and solar). Two classes of inverters are examined in this thesis. A control-centric design
procedure is presented for each class. The first class of inverters is simple in that they
consist of three decoupled subsystems. Such inverters are characterized by no mutual
inductance between the three phases. As such, no multivariable coupling is present and
decentralized single-input single-output (SISO) control theory suffices to generate
acceptable control designs. For this class of inverters several families of controllers are
addressed in order to examine command following as well as input disturbance and noise
attenuation specifications. The goal here is to illuminate fundamental tradeoffs. Such
tradeoffs include an improvement in the in-band command following and output
disturbance attenuation versus a deterioration in out-of-band noise attenuation.
A fundamental deficiency associated with such inverters is their large size. This can be
remedied by designing a smaller core. This naturally leads to the second class of inverters
considered in this work. These inverters are characterized by significant mutual
inductances and multivariable coupling. As such, SISO control theory is generally not
adequate and multiple-input multiple-output (MIMO) theory becomes essential for
controlling these inverters.
used to produce three-phase sinusoidal voltages and currents from a DC source. They
are critical for injecting power from renewable energy sources into the grid. This is
especially true since many of these sources of energy are DC sources (e.g. solar
photovoltaic) or need to be stored in DC batteries because they are intermittent (e.g. wind
and solar). Two classes of inverters are examined in this thesis. A control-centric design
procedure is presented for each class. The first class of inverters is simple in that they
consist of three decoupled subsystems. Such inverters are characterized by no mutual
inductance between the three phases. As such, no multivariable coupling is present and
decentralized single-input single-output (SISO) control theory suffices to generate
acceptable control designs. For this class of inverters several families of controllers are
addressed in order to examine command following as well as input disturbance and noise
attenuation specifications. The goal here is to illuminate fundamental tradeoffs. Such
tradeoffs include an improvement in the in-band command following and output
disturbance attenuation versus a deterioration in out-of-band noise attenuation.
A fundamental deficiency associated with such inverters is their large size. This can be
remedied by designing a smaller core. This naturally leads to the second class of inverters
considered in this work. These inverters are characterized by significant mutual
inductances and multivariable coupling. As such, SISO control theory is generally not
adequate and multiple-input multiple-output (MIMO) theory becomes essential for
controlling these inverters.
ContributorsSarkar, Aratrik (Author) / Rodriguez, Armando A. (Thesis advisor) / Si, Jennie (Committee member) / Tsakalis, Konstantinos (Committee member) / Arizona State University (Publisher)
Created2015
Description
Vertical take-off and landing (VTOL) systems have become a crucial component of aeronautical and commercial applications alike. Quadcopter systems are rather convenient to analyze and design controllers for, owing to symmetry in body dynamics. In this work, a quadcopter model at hover equilibrium is derived, using both high and low level control. The low level control system is designed to track reference Euler angles (roll, pitch and yaw) as shown in previous work [1],[2]. The high level control is designed to track reference X, Y, and Z axis states [3].
The objective of this paper is to model, design and simulate platooning (separation) control for a fleet of 6 quadcopter units, each comprising of high and low level control systems, using a leader-follower approach. The primary motivation of this research is to examine the ”accordion effect”, a phenomenon observed in leader-follower systems due to which positioning or spacing errors arise in follower vehicles due to sudden changes in lead vehicle velocity. It is proposed that the accordion effect occurs when lead vehicle information is not directly communicated with the rest of the
system [4][5]
.
In this paper, the effect of leader acceleration feedback is observed for the quadcopter platoon. This is performed by first designing a classical platoon controller for a nominal case, where communication within the system is purely ad-hoc (i.e from one quadcopter to it’s immediate successor in the fleet). Steady state separation/positioning errors for each member of the fleet are observed and documented during simulation. Following this analysis, lead vehicle acceleration is provided to the controller (as a feed forward term), to observe the extent of it’s effect on steady state separation, specifically along tight maneuvers. Thus the key contribution of this work is a controller that stabilizes a platoon of quadcopters in the presence of the accordion effect, when employing a leader-follower approach. The modeling shown in this paper builds on previous research to design a low costquadcopter platform, the Mark 3 copter [1]. Prior to each simulation, model nonlinearities and hardware constants are measured or derived from the Mark 3 model, in an effort to observe the working of the system in the presence of realistic hardware constraints. The system is designed in compliance with Robot Operating System (ROS) and the Micro Air Vehicle Link (MAVLINK) communication protocol.
ContributorsSrinivasan, Anshuman (Author) / Rodriguez, Armando A. (Thesis advisor) / Si, Jennie (Committee member) / Tsakalis, Konstantinos (Committee member) / Arizona State University (Publisher)
Created2021