ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Displaying 1 - 10 of 366
Filtering by
- All Subjects: Health Sciences
- All Subjects: literature
- All Subjects: Alternative Energy
Description
Emergent environmental issues, ever-shrinking petroleum reserves, and rising fossil fuel costs continue to spur interest in the development of sustainable biofuels from renewable feed-stocks. Meanwhile, however, the development and viability of biofuel fermentations remain limited by numerous factors such as feedback inhibition and inefficient and generally energy intensive product recovery processes. To circumvent both feedback inhibition and recovery issues, researchers have turned their attention to incorporating energy efficient separation techniques such as adsorption in in situ product recovery (ISPR) approaches. This thesis focused on the characterization of two novel adsorbents for the recovery of alcohol biofuels from model aqueous solutions. First, a hydrophobic silica aerogel was evaluated as a biofuel adsorbent through characterization of equilibrium behavior for conventional second generation biofuels (e.g., ethanol and n-butanol). Longer chain and accordingly more hydrophobic alcohols (i.e., n-butanol and 2-pentanol) were more effectively adsorbed than shorter chain alcohols (i.e., ethanol and i-propanol), suggesting a mechanism of hydrophobic adsorption. Still, the adsorbed alcohol capacity at biologically relevant conditions were low relative to other `model' biofuel adsorbents as a result of poor interfacial contact between the aqueous and sorbent. However, sorbent wettability and adsorption is greatly enhanced at high concentrations of alcohol in the aqueous. Consequently, the sorbent exhibits Type IV adsorption isotherms for all biofuels studied, which results from significant multilayer adsorption at elevated alcohol concentrations in the aqueous. Additionally, sorbent wettability significantly affects the dynamic binding efficiency within a packed adsorption column. Second, mesoporous carbons were evaluated as biofuel adsorbents through characterization of equilibrium and kinetic behavior. Variations in synthetic conditions enabled tuning of specific surface area and pore morphology of adsorbents. The adsorbed alcohol capacity increased with elevated specific surface area of the adsorbents. While their adsorption capacity is comparable to polymeric adsorbents of similar surface area, pore morphology and structure of mesoporous carbons greatly influenced adsorption rates. Multiple cycles of adsorbent regeneration rendered no impact on adsorption equilibrium or kinetics. The high chemical and thermal stability of mesoporous carbons provide potential significant advantages over other commonly examined biofuel adsorbents. Correspondingly, mesoporous carbons should be further studied for biofuel ISPR applications.
ContributorsLevario, Thomas (Author) / Nielsen, David R (Thesis advisor) / Vogt, Bryan D (Committee member) / Lind, Mary L (Committee member) / Arizona State University (Publisher)
Created2011
Description
The effects of a long-term combat deployment on a soldier's physical fitness are not well understood. In active duty soldiers, combat deployment reduced physical fitness compared to pre-deployment status, but no similar research has been performed on Army National Guard soldiers. This study is the first to identify physical fitness changes in Arizona National Guard (AZNG) soldiers following deployment to a combat zone and to assess the relationships between physical fitness and non-combat injuries and illness (NCII). Sixty soldiers from the Arizona National Guard (AZNG) completed a battery of physical fitness tests prior to deployment and within 1-7 days of returning from a 12-month deployment to Iraq. Pre and post-deployment measures assessed body composition (Bod Pod), muscular strength (1RM bench press, back-squat), muscular endurance (push-up, sit-up), power (Wingate cycle test), cardiorespiratory fitness (treadmill run to VO2 peak), and flexibility (sit-and-reach, trunk extension, shoulder elevation). Post deployment, medical records were reviewed by a blinded researcher and inventoried for NCII that occurred during deployment. Data were analyzed for changes between pre and post-deployment physical fitness. Relationships between fitness and utilization of medical resources for NCII were then determined. Significant declines were noted in mean cardiorespiratory fitness (-10.8%) and trunk flexibility (-6.7%). Significant improvements were seen in mean level of fat mass (-11.1%), relative strength (bench press, 10.2%, back-squat 14.2%) and muscular endurance (push-up 16.4%, sit-up 11.0%). Significant (p < 0.05) negative correlations were detected between percentage change in fat mass and gastrointestinal visits (r = -0.37); sit-and-reach and lower extremity visits (r= -0.33); shoulder elevation and upper extremity visits (r= -0.36); and cardiorespiratory fitness and back visits (r= -0.31); as well as behavioral health visits (r= -0.28). Cardiorespiratory fitness changes were grouped into tertiles. Those who lost the greatest fitness had significantly greater number of NCII visits (8.0 v 3.1 v 2.6, p = .03). These data indicate a relationship between the decline in cardiorespiratory fitness and an overall increase in utilization of medical resources. The results may provide incentive to military leaders to ensure that soldiers maintain their cardiorespiratory fitness throughout the extent of their deployment.
ContributorsWarr, Bradley (Author) / Swan, Pamela (Thesis advisor) / Lee, Chong (Committee member) / Campbell, Kathryn (Committee member) / Erickson, Steven (Committee member) / Alvar, Brent (Committee member) / Arizona State University (Publisher)
Created2011
Description
This dissertation examines associations between religious affiliation, religious community context and health of women and their children in Mozambique focusing on the following issues: (1) attending prenatal consultations and delivering children in a health facility; (2) women's symptoms of STDs; and (3) under-five mortality. Estimation of random intercept Poisson regression for the outcome about attending prenatal consultations demonstrated a favorable effect of affiliation to Catholic or Mainline Protestant and Apostolic religious groups. The concentration of Zionist churches in the community had a negative influence. Random intercept logistic regression was used to estimate the relationship between religion and institutional child delivery. Affiliation to Catholic or Mainline Protestant denominations as well as concentration of Catholic or Mainline Protestant churches in the community had some beneficial effect on giving birth in health clinics. The presence of Zionist churches in the community had some negative effect and that of other groups no significant influence. Random intercept logistic regression was also employed for investigating the influence of religion on women's symptoms of STDs. Belonging to the Catholic or Mainline Protestant church had some protective effect on reporting symptoms of STDs. There was no effect of religious context, except that the concentration of Other Pentecostal churches had a positive effect on reporting symptoms of SDTs. Event-history analysis was conducted for examining relationships between maternal religious affiliation with under-five mortality. Affiliation to Catholic or Mainline Protestant churches and to Apostolic denominations increased the odds of child survival, although, the influence of having a mother belonging to Catholic or Mainline Protestant churches lost statistical significance after accounting particularly for the average level of education in the community, for the period of 5 years preceding the survey date. Taken together, the results in this dissertation show some protective effect of religion that varies primarily by denominational group to which women are affiliated. They also indicate that religious community context may have some negative effect on health of women and children. The nature of the effect of religious community context varies with the type of outcome considered and the type of religious mixture in the community.
ContributorsCau, Boaventura Manuel (Author) / Agadjanian, Victor (Thesis advisor) / Hayford, Sarah (Committee member) / Yabiku, Scott (Committee member) / Arizona State University (Publisher)
Created2011
Description
The most horrific, darkest, and powerful forms of the sublime take place inside the enclosure of the human psyche; the interior of the mind is the playground for the sublime--not the crag and canyon filled natural world. For Immanuel Kant and Edmund Burke, the driving force of the power of the sublime stems from the feelings of pain and fear: where is that more manifested than in the mind? Unlike the common, traditional, and overwhelmed discussion of Percy Shelley and his contemporaries and the power of the sublime in nature, I will argue that in The Cenci, Shelley, through well-chosen diction and precise composition of terrifying images, fashions characters and scenes in an emotion-driven play that elevates the mind of the reader to a transcendent sublime experience. Through a discussion of the theories of the aesthetic of the sublime laid out by Longinus, Burke, and Kant, I will provide a foundation for the later discussion of the rhetorical sublime evoked by Shelley in the ardent and horrifying play that is The Cenci. Looking at the conventional application of the theories of the sublime to romantic writing will make evident the holes in the discussion of the sublime and romantic writings that have almost forgotten the powerful and psychological rhetorical aspect of the sublime that is emphasized in the theoretical writings of both Burke and Kant. To clarify what is traditionally associated with Shelley and the sublime, a brief analysis of the Shelleyean sublime and Shelley's 1816 poem "Mont Blanc" will prepare the reader for an unconventional, but every bit important and powerful, function of the sublime in the 1819 play The Cenci based on the horrific happenings of a historical 16th century Italian noble family.
ContributorsGowan, Kaitlin (Author) / Lussier, Mark (Thesis advisor) / Corse, Douglas Taylor (Committee member) / Broglio, Ronald (Committee member) / Arizona State University (Publisher)
Created2011
Description
Proton exchange membrane fuel cells (PEMFCs) run on pure hydrogen and oxygen (or air), producing electricity, water, and some heat. This makes PEMFC an attractive option for clean power generation. PEMFCs also operate at low temperature which makes them quick to start up and easy to handle. PEMFCs have several important limitations which must be overcome before commercial viability can be achieved. Active areas of research into making them commercially viable include reducing the cost, size and weight of fuel cells while also increasing their durability and performance. A growing and important part of this research involves the computer modeling of fuel cells. High quality computer modeling and simulation of fuel cells can help speed up the discovery of optimized fuel cell components. Computer modeling can also help improve fundamental understanding of the mechanisms and reactions that take place within the fuel cell. The work presented in this thesis describes a procedure for utilizing computer modeling to create high quality fuel cell simulations using Ansys Fluent 12.1. Methods for creating computer aided design (CAD) models of fuel cells are discussed. Detailed simulation parameters are described and emphasis is placed on establishing convergence criteria which are essential for producing consistent results. A mesh sensitivity study of the catalyst and membrane layers is presented showing the importance of adhering to strictly defined convergence criteria. A study of iteration sensitivity of the simulation at low and high current densities is performed which demonstrates the variance in the rate of convergence and the absolute difference between solution values derived at low numbers of iterations and high numbers of iterations.
ContributorsArvay, Adam (Author) / Madakannan, Arunachalanadar (Thesis advisor) / Peng, Xihong (Committee member) / Liang, Yong (Committee member) / Subach, James (Committee member) / Arizona State University (Publisher)
Created2011
Description
Infant mortality rate of field deployed photovoltaic (PV) modules may be expected to be higher than that estimated by standard qualification tests. The reason for increased failure rates may be attributed to the high system voltages. High voltages (HV) in grid connected modules induce additional stress factors that cause new degradation mechanisms. These new degradation mechanisms are not recognized by qualification stress tests. To study and model the effect of high system voltages, recently, potential induced degradation (PID) test method has been introduced. Using PID studies, it has been reported that high voltage failure rates are essentially due to increased leakage currents from active semiconducting layer to the grounded module frame, through encapsulant and/or glass. This project involved designing and commissioning of a new PID test bed at Photovoltaic Reliability Laboratory (PRL) of Arizona State University (ASU) to study the mechanisms of HV induced degradation. In this study, PID stress tests have been performed on accelerated stress modules, in addition to fresh modules of crystalline silicon technology. Accelerated stressing includes thermal cycling (TC200 cycles) and damp heat (1000 hours) tests as per IEC 61215. Failure rates in field deployed modules that are exposed to long term weather conditions are better simulated by conducting HV tests on prior accelerated stress tested modules. The PID testing was performed in 3 phases on a set of 5 mono crystalline silicon modules. In Phase-I of PID test, a positive bias of +600 V was applied, between shorted leads and frame of each module, on 3 modules with conducting carbon coating on glass superstrate. The 3 module set was comprised of: 1 fresh control, TC200 and DH1000. The PID test was conducted in an environmental chamber by stressing the modules at 85°C, for 35 hours with an intermittent evaluation for Arrhenius effects. In the Phase-II, a negative bias of -600 V was applied on a set of 3 modules in the chamber as defined above. The 3 module set in phase-II was comprised of: control module from phase-I, TC200 and DH1000. In the Phase-III, the same set of 3 modules which were used in the phase-II again subjected to +600 V bias to observe the recovery of lost power during the Phase-II. Electrical performance, infrared (IR) and electroluminescence (EL) were done prior and post PID testing. It was observed that high voltage positive bias in the first phase resulted in little
o power loss, high voltage negative bias in the second phase caused significant power loss and the high voltage positive bias in the third phase resulted in major recovery of lost power.
o power loss, high voltage negative bias in the second phase caused significant power loss and the high voltage positive bias in the third phase resulted in major recovery of lost power.
ContributorsGoranti, Sandhya (Author) / Tamizhmani, Govindasamy (Thesis advisor) / Rogers, Bradley (Committee member) / Macia, Narciso (Committee member) / Arizona State University (Publisher)
Created2011
Description
In the first thirty years of the XX century, an old literary visual tradition was reborn in a series of new striking visual texts better known as calligrams. They were produced by some avant-garde poets such as Vicente Huidobro, José Juan Tablada, Alberto Hidalgo and Carlos Oquendo de Amat in Latin America, and Juan Larrea, Guillermo de Torre, Francisco Vighi, Luis Mosquera, and others in Spain. However, with few exceptions, the interpretation of those written drawings has caught little attention from literary critics. This research, contrasted to that of Willard Bohn's, is a contribution to the deciphering of such literary art form, designated here as the figurative visual poem. It is a proposal for its visual reading which draws from the fact that this type of text is concretely a drawing formed by written verses. As such, it can be regarded as a plastic writing, combining pictorial and verbal signs in one perceptible configuration on the page. The result of this semiotic operation is a hybrid product in which the iconic forms become symbolic and vice versa. It is in fact, an art object which should be approached as a text that can be seen as well as read. The study leads to the conclusion that Willard Bohn misreads the order in which language and image are articulated in the visual poem identified with the second order semiological system proposed by Roland Barthes, placing preeminence on language over image. This results in reading the avant-garde visual figurative poem in an ekphrastic fashion. Consequently, the role of the image in the system is left in an ambiguous realm at the time of deciphering this hybrid text. Our contribution to re-conducting this undertaking has been equally drawn from a semiotic stance taken from Louis Hjemslev that balances language and image as correlates of a semiotic function. Due to the signaling nature of both, language and figure, a visual poem becomes an iconic metaphor as well as a metaphoric icon, and moreover a self-referential sign, thus justifying its status of an autonomous art.
ContributorsSuarez, Nelson M (Author) / Acereda, Alberto (Thesis advisor) / Volek, Emil (Committee member) / Garcia-Fernandez, Carlos J (Committee member) / Arizona State University (Publisher)
Created2011
Description
Health-related quality of life (HR-QOL) is a significant treatment outcome for persons with end-stage renal disease (ESRD); however, little is known about the HR-QOL of Mexican patients with ESRD. This pilot study describes relationships between demographics, sleep disorders, spirituality, mood, folk practices and dialysis modality on the HR-QOL of patients with ESRD residing in Guanajuato, Mexico. Mexican patients receiving continuous ambulatory peritoneal dialysis (CAPD), automated peritoneal dialysis (APD) and hemodialysis (HD) provided information on demographics, clinical health data including body mass index (BMI), and folk health practices. Measures included the Short Form (SF)-36 HR-QOL survey, Sleep Habits Questionnaire, Latin Spirituality Perspective Scale and Hospital Anxiety and Depression Scale. Data were analyzed using SAS software (V9.1). Signifi¬cance level for this pilot study was set at p<0.10. The Quality-Adjusted Life Year method was utilized to examine cost effectiveness for each dialysis modality. Demographics and clinical data showed participants (N=121) to be 59 (SD=13) years, predominantly men (55.4%), married (66.9%), Catholic (92.6%), and not currently working (78.3%). The majority were diabetic (72%) and slightly overweight (BMI M=26.1; SD=5.1). The CAPD group (n=39) demonstrated significantly lower HR-QOL scores compared to the APD (n=42) and HD (n=40) groups. Patients on HD reported higher rates and greater numbers of sleep disorders, including insomnia symptoms, non-restorative and insufficient sleep, and daytime somnolence compared to patients on CAPD and APD. Patients on CAPD reported more anxiety and depression compared to patients on HD and APD. Overall linear regression for HR-QOL found dialysis type, sleep disorders and income to be significant predictors and the model accounted for 31% of the variance. Cost analysis indicated APD as the preferred treatment because it is less costly and results in the best HR-QOL compared to the other treatment modalities. Findings provide the first SF-36 norms for Mexicans with ESRD. Sleep disorders and dialysis type greatly impinge on the HR-QOL of these patients, particularly their mental health. APD was identified as the preferred treatment based on low cost and improved HR-QOL. Results can inform clinical care and health policy for Mexican patients with ESRD.
ContributorsReynaga-Ornelas, Luxana (Author) / Baldwin, Carol M. (Thesis advisor) / Quan, Stuart F (Committee member) / Arcoleo, Kimberly (Committee member) / Arizona State University (Publisher)
Created2011
Description
The hagiographic comedy written by Tirso de Molina Los lagos de San Vicente (1607) presents the journey of Santa Casilda in search of the cure of an illness in her blood that affects her. Casilda rejects the medical assistance offered to her by Muslim doctors and miraculously she finds the cure in the Christian world. In this quest, the intellectual and theological evolution of the future saint in defense of the Christian faith is presented. This dissertation will study the resources that Tirso de Molina employs to show the rejection and displacement against the Islamic world represented by a series of erotic behaviors that, in the effort of dramatizing these impertinences they are characterized within a second discourse. Tirso de Molina takes advantage of the hagiographic comedy's discourse nature and the baroque's obscure literary characteristics to express his messages. This dissertation will study in detail how the combination of hagiographic theatrical elements with linguistic expressions are used to convey a subversive discourse that therefore suggests the application of queer theory as a frame of reference. As a result of this investigation it is concluded that Tirso de Molina promotes the hagiographic model and in order to contrast the triumph of the moral Catholic world over the immoral Muslim world the play writer makes references to the nefarious sin.
ContributorsMurphy, Anayanci (Author) / Foster, David William (Thesis advisor) / Sanchez, Angel (Committee member) / Acereda, Alberto (Committee member) / Urioste-Azcorra, Carmen (Committee member) / Volek, Emil (Committee member) / Arizona State University (Publisher)
Created2011
Description
Building Applied Photovoltaics (BAPV) form an essential part of today's solar economy. This thesis is an effort to compare and understand the effect of fan cooling on the temperature of rooftop photovoltaic (PV) modules by comparing two side-by-side arrays (test array and control array) under identical ambient conditions of irradiance, air temperature, wind speed and wind direction. The lower operating temperature of PV modules due to fan operation mitigates array non uniformity and improves on performance. A crystalline silicon (c-Si) PV module has a light to electrical conversion efficiency of 14-20%. So on a cool sunny day with incident solar irradiance of 1000 W/m2, a PV module with 15% efficiency, will produce about only 150 watts. The rest of the energy is primarily lost in the form of heat. Heat extraction methods for BAPV systems may become increasingly higher in demand as the hot stagnant air underneath the array can be extracted to improve the array efficiency and the extracted low-temperature heat can also be used for residential space heating and water heating. Poly c-Si modules experience a negative temperature coefficient of power at about -0.5% /o C. A typical poly c-Si module would experience power loss due to elevation in temperature, which may be in the range of 25 to 30% for desert conditions such as that of Mesa, Arizona. This thesis investigates the effect of fan cooling on the previously developed thermal models at Arizona State University and on the performance of PV modules/arrays. Ambient conditions are continuously monitored and collected to calculate module temperature using the thermal model and to compare with actually measured temperature of individual modules. Including baseline analysis, the thesis has also looked into the effect of fan on the test array in three stages of 14 continuous days each. Multiple Thermal models are developed in order to identify the effect of fan cooling on performance and temperature uniformity. Although the fan did not prove to have much significant cooling effect on the system, but when combined with wind blocks it helped improve the thermal mismatch both under low and high wind speed conditions.
ContributorsChatterjee, Saurabh (Author) / Tamizhmani, Govindasamy (Thesis advisor) / Rogers, Bradley (Committee member) / Macia, Narciso (Committee member) / Arizona State University (Publisher)
Created2011