ASU Electronic Theses and Dissertations
This collection includes most of the ASU Theses and Dissertations from 2011 to present. ASU Theses and Dissertations are available in downloadable PDF format; however, a small percentage of items are under embargo. Information about the dissertations/theses includes degree information, committee members, an abstract, supporting data or media.
In addition to the electronic theses found in the ASU Digital Repository, ASU Theses and Dissertations can be found in the ASU Library Catalog.
Dissertations and Theses granted by Arizona State University are archived and made available through a joint effort of the ASU Graduate College and the ASU Libraries. For more information or questions about this collection contact or visit the Digital Repository ETD Library Guide or contact the ASU Graduate College at gradformat@asu.edu.
Displaying 1 - 7 of 7
Filtering by
- All Subjects: Biochemistry
- All Subjects: Materials Science
Description
Thiol functionalization is one potentially useful way to tailor physical and chemical properties of graphene oxides (GOs) and reduced graphene oxides (RGOs). Despite the ubiquitous presence of thiol functional groups in diverse chemical systems, efficient thiol functionalization has been challenging for GOs and RGOs, or for carbonaceous materials in general. In this work, thionation of GOs has been achieved in high yield through two new methods that also allow concomitant chemical reduction/thermal reduction of GOs; a solid-gas metathetical reaction method with boron sulfides (BxSy) gases and a solvothermal reaction method employing phosphorus decasulfide (P4S10). The thionation products, called "mercapto reduced graphene oxides (m-RGOs)", were characterized by employing X-ray photoelectron spectroscopy, powder X-ray diffraction, UV-Vis spectroscopy, FT-IR spectroscopy, Raman spectroscopy, electron probe analysis, scanning electron microscopy, (scanning) transmission electron microscopy, nano secondary ion mass spectrometry, Ellman assay and atomic force microscopy. The excellent dispersibility of m-RGOs in various solvents including alcohols has allowed fabrication of thin films of m-RGOs. Deposition of m-RGOs on gold substrates was achieved through solution deposition and the m-RGOs were homogeneously distributed on gold surface shown by atomic force microscopy. Langmuir-Blodgett (LB) films of m-RGOs were obtained by transferring their Langmuir films, formed by simple drop casting of m-RGOs dispersion on water surface, onto various substrates including gold, glass and indium tin oxide. The m-RGO LB films showed low sheet resistances down to about 500 kΩ/sq at 92% optical transparency. The successful results make m-RGOs promising for applications in transparent conductive coatings, biosensing, etc.
ContributorsJeon, Kiwan (Author) / Seo, Dong-Kyun (Thesis advisor) / Jones, Anne K (Committee member) / Yarger, Jeffery (Committee member) / Arizona State University (Publisher)
Created2013
Description
The egg cases of spiders are commonly multilayered, complex structures that contain several silk fibers. This study uses optical and polarized microscopy, scanning electron microscopy, and infrared spectroscopy to compare the morphology and secondary protein structure of egg case silk of two orb-web spider species (A. aurantia and A. trifascita), two cobweb species (L. hesperus and L. geometricus), and one nursery web species (D. okefinokensis). A common feature of all six spiders' egg cases was a more dense and rigid outer layer, which was typically comprised of both tubiliform and aciniform silk fibers, along with a less dense inner layer of pure tubiliform silk. Infrared spectroscopy revealed that tubiliform silk from all egg cases contain a significant proportion (30-50%) of beta-sheet nanocrystalline aligned regions that are embedded in an amorphous random coil matrix, which does not change appreciably with hydration. While the native as-spun aciniform silk fibers primarily incorporated into the outer shell layer of egg cases are observed to be dominated by alpha-helical and random coil secondary structures, where the alpha-helical component undergoes a partial hydration-induced conversion to beta-sheet. Akin to egg case silk’s biochemical structure, its potential uses encompass a wide variety of industries, especially medicine. Synthetic materials have served in roles where silk often caters best to with its high mechanical/chemical robustness and biocompatability while also ushering in novel treatment avenues. An arachnid-based film hybridized with a photothermal converter nanoparticle such as copper salt or silver nanoprisms, which serve to weld the suture to the dermal tissue, is a promising strategy in the goal of ever improving patient outcomes.These two studies in parallel, one of a fundamental focus and one of an applied outlook, seek to understand and exploit the properties of spider silk in order to advance our knowledge of this amazing material and harness its potential for a wide range of practical applications.
ContributorsDeCambra, Weston (Author) / Yarger, Jeffery (Thesis advisor) / Rege, Kaushal (Committee member) / Birkel, Christina (Committee member) / Arizona State University (Publisher)
Created2024
Description
Glycosaminoglycans (GAGs) are a class of complex biomolecules comprised of linear, sulfated polysaccharides whose presence on cell surfaces and in the extracellular matrix involve them in many physiological phenomena as well as in interactions with pathogenic microbes. Decorin binding protein A (DBPA), a Borrelia surface lipoprotein involved in the infectivity of Lyme disease, is responsible for binding GAGs found on decorin, a small proteoglycan present in the extracellular matrix. Different DBPA strains have notable sequence heterogeneity that results in varying levels of GAG-binding affinity. In this dissertation, the structures and GAG-binding mechanisms for three strains of DBPA (B31 and N40 DBPAs from B. burgdorferi and PBr DBPA from B. garinii) are studied to determine why each strain has a different affinity for GAGs. These three strains have similar topologies consisting of five α-helices held together by a hydrophobic core as well as two long flexible segments: a linker between helices one and two and a C-terminal tail. This structural arrangement facilitates the formation of a basic pocket below the flexible linker which is the primary GAG-binding epitope. However, this GAG-binding site can be occluded by the flexible linker, which makes the linker a negative regulator of GAG-binding. ITC and NMR titrations provide KD values that show PBr DBPA binds GAGs with higher affinity than B31 and N40 DBPAs, while N40 binds with the lowest affinity of the three. Work in this thesis demonstrates that much of the discrepancies seen in GAG affinities of the three DBPAs can be explained by the amino acid composition and conformation of the linker. Mutagenesis studies show that B31 DBPA overcomes the pocket obstruction with the BXBB motif in its linker while PBr DBPA has a retracted linker that exposes the basic pocket as well as a secondary GAG-binding site. N40 DBPA, however, does not have any evolutionary modifications to its structure to enhance GAG binding which explains its lower affinity for GAGs. GMSA and ELISA assays, along with NMR PRE experiments, confirm that structural changes in the linker do affect GAG-binding and, as a result, the linker is responsible for regulating GAG affinity.
ContributorsMorgan, Ashli M (Author) / Wang, Xu (Thesis advisor) / Allen, James (Committee member) / Yarger, Jeffery (Committee member) / Arizona State University (Publisher)
Created2015
Description
In disordered soft matter system, amorphous and crystalline components might be coexisted. The interaction between the two distinct structures and the correlation within the crystalline components are crucial to the macroscopic property of the such material. The spider dragline silk biopolymer, is one of such soft matter material that exhibits exceptional mechanical strength though its mass density is considerably small compare to structural metal. Through wide-angle X-ray scattering (WAXS), the research community learned that the silk fiber is mainly composed of amorphous backbone and $\beta$-sheet nano-crystals. However, the morphology of the crystalline system within the fiber is still not clear. Therefore, a combination of small-angle X-ray scattering experiments and stochastic simulation is designed here to reveal the nano-crystalline ordering in spider silk biopolymer. In addition, several density functional theory (DFT) calculations were performed to help understanding the interaction between amorphous backbone and the crystalline $\beta$-sheets.
By taking advantage of the prior information obtained from WAXS, a rather crude nano-crystalline model was initialized for further numerical reconstruction. Using Markov-Chain stochastic method, a hundreds of nanometer size $\beta$-sheet distribution model was reconstructed from experimental SAXS data, including silk fiber sampled from \textit{Latrodectus hesperus}, \textit{Nephila clavipes}, \textit{Argiope aurantia} and \textit{Araneus gemmoides}. The reconstruction method was implemented using MATLAB and C++ programming language and can be extended to study a broad range of disordered material systems.
By taking advantage of the prior information obtained from WAXS, a rather crude nano-crystalline model was initialized for further numerical reconstruction. Using Markov-Chain stochastic method, a hundreds of nanometer size $\beta$-sheet distribution model was reconstructed from experimental SAXS data, including silk fiber sampled from \textit{Latrodectus hesperus}, \textit{Nephila clavipes}, \textit{Argiope aurantia} and \textit{Araneus gemmoides}. The reconstruction method was implemented using MATLAB and C++ programming language and can be extended to study a broad range of disordered material systems.
ContributorsMou, Qiushi (Author) / Yarger, Jeffery (Thesis advisor) / Benmore, Chris (Committee member) / Holland, Gregory (Committee member) / Ros, Robert (Committee member) / Arizona State University (Publisher)
Created2015
Description
This work describes the investigation of novel cathode and anode materials. Specifically, several mixed polyanion compounds were evaluated as cathodes for Li and Na-ion batteries. Clathrate compounds composed of silicon or germanium arranged in cage-like structures were studied as anodes for Li-ion batteries.
Nanostructured Cu4(OH)6SO4 (brochantite) platelets were synthesized using polymer-assisted titration and microwave-assisted hydrothermal methods. These nanostructures exhibited a capacity of 474 mAh/g corresponding to the full utilization of the copper redox in an conversion reaction. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) studies were preformed to understand the mechanism and structural changes.
A microwave hydrothermal synthesis was developed to prepare a series compounds based on jarosite, AM3(SO4)2(OH)6 (A = K, Na; M = Fe, V). Both the morphology and electrochemical properties showed a compositional dependence. At potentials >1.5 V vs. Li/Li+, an insertion-type reaction was observed in Na,Fe-jarosite but not in K,Fe-jarosite. Reversible insertion-type reactions were observed in both vanadium jarosites between 1 – 4 V with capacities around 40 - 60 mAh/g. Below 1 V vs. Li/Li+, all four jarosite compounds underwent conversion reactions with capacities ~500 mAh/g for the Fe-jarosites.
The electrochemical properties of hydrogen titanium phosphate sulfate, H0.4Ti2(PO4)2.4(SO4)0.6 (HTPS), a new mixed polyanion material with NASICON structure was reported. A capacity of 148 mAh/g corresponding to2 Li+ insertion per formula unit was observed. XRD and XPS were used to characterize the HTPS before and after cycling and to identify the lithium sites. Evaluation of the HTPS in Na-ion cell was also performed, and a discharge capacity of 93 mAh/g was observed.
A systematic investigation of the role of the processing steps, such as ball-milling and acid/base etching, on the electrochemical properties of a silicon clathrate compound with nominal composition of Ba8Al16Si30 was performed. According to the transmission electron microscope (TEM), XPS, and electrochemical analysis, very few Li atoms can be electrochemically inserted, but the introduction of disorder through ball-milling resulted in higher capacity, while the oxidation layer made by the acid/base treatment prevented the reation. The electrochemical property of germanium clathrate was also investigated, unlike the silicon clathrate, the germanium one underwent a conversion reaction.
Nanostructured Cu4(OH)6SO4 (brochantite) platelets were synthesized using polymer-assisted titration and microwave-assisted hydrothermal methods. These nanostructures exhibited a capacity of 474 mAh/g corresponding to the full utilization of the copper redox in an conversion reaction. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) studies were preformed to understand the mechanism and structural changes.
A microwave hydrothermal synthesis was developed to prepare a series compounds based on jarosite, AM3(SO4)2(OH)6 (A = K, Na; M = Fe, V). Both the morphology and electrochemical properties showed a compositional dependence. At potentials >1.5 V vs. Li/Li+, an insertion-type reaction was observed in Na,Fe-jarosite but not in K,Fe-jarosite. Reversible insertion-type reactions were observed in both vanadium jarosites between 1 – 4 V with capacities around 40 - 60 mAh/g. Below 1 V vs. Li/Li+, all four jarosite compounds underwent conversion reactions with capacities ~500 mAh/g for the Fe-jarosites.
The electrochemical properties of hydrogen titanium phosphate sulfate, H0.4Ti2(PO4)2.4(SO4)0.6 (HTPS), a new mixed polyanion material with NASICON structure was reported. A capacity of 148 mAh/g corresponding to2 Li+ insertion per formula unit was observed. XRD and XPS were used to characterize the HTPS before and after cycling and to identify the lithium sites. Evaluation of the HTPS in Na-ion cell was also performed, and a discharge capacity of 93 mAh/g was observed.
A systematic investigation of the role of the processing steps, such as ball-milling and acid/base etching, on the electrochemical properties of a silicon clathrate compound with nominal composition of Ba8Al16Si30 was performed. According to the transmission electron microscope (TEM), XPS, and electrochemical analysis, very few Li atoms can be electrochemically inserted, but the introduction of disorder through ball-milling resulted in higher capacity, while the oxidation layer made by the acid/base treatment prevented the reation. The electrochemical property of germanium clathrate was also investigated, unlike the silicon clathrate, the germanium one underwent a conversion reaction.
ContributorsZhao, Ran (Author) / Chan, Candace K. (Thesis advisor) / Buttry, Daniel (Committee member) / Yarger, Jeffery (Committee member) / Arizona State University (Publisher)
Created2017
Description
The small mitogenic cytokine Pleiotrophin (PTN) is well-known for its roles in
tissue growth, development, and repair. First isolated from neuronal tissues, much interest in this protein resides in development of the central nervous system and neuronal regeneration. Owning to its role in growth, development and its ability to promote angiogenesis and metastasis, PTN’s overexpression in cancers such as glioblastoma, has become the focal point of much research. Many of the receptors through which PTN acts contain glycosaminoglycans (GAGs), through which PTN binds. Thus, understanding the atomistic detail of PTN’s architecture and interaction with GAG chains is of significant importance in elucidating its functional role in growth and malignancy of biological tissues, as well as in neural development and progression of other diseases. Herein the first solution state structure of PTN was solved via nuclear magnetic resonance (NMR), with extensive characterization of its ability to bind GAG. Structurally, PTN consists of two -sheet domains connected by a short flexible linker, and flanked by long flexible termini. Broad distribution of positively charged amino acids in the protein’s sequence yields highly basic surfaces on the -sheet domains as well as highly cationic termini. With GAG chains themselves being linear anionic polymers, all interactions between these sugars and PTN are most exclusively driven through the electrostatic interactions between them, with no discernable specificity for GAG types. Moreover, this binding event is coordinated mostly through basic patches located in the C-Terminal domain (CTD). Although the flexible C- terminus has been shown to play a significant role in receptor binding, data here also reveal an adaptability of PTN to maintain high affinity interactions through its structured domains
when termini are removed. Additionally, analysis of binding information revealed for the first time the presence of a secondary GAG binding site within PTN. It is shown that PTN’s CTD constitutes the major binding site, while the N-terminal domain (NTD) contains the much weaker secondary site. Finally, compilation of high-resolution data containing the atomistic detail of PTN’s interaction with GAG provided the information necessary to produce the highest accuracy model to date of the PTN-GAG complex. Taken together, these findings provide means for specific targeting of this mitogenic cytokine in a wide array of biological applications.
tissue growth, development, and repair. First isolated from neuronal tissues, much interest in this protein resides in development of the central nervous system and neuronal regeneration. Owning to its role in growth, development and its ability to promote angiogenesis and metastasis, PTN’s overexpression in cancers such as glioblastoma, has become the focal point of much research. Many of the receptors through which PTN acts contain glycosaminoglycans (GAGs), through which PTN binds. Thus, understanding the atomistic detail of PTN’s architecture and interaction with GAG chains is of significant importance in elucidating its functional role in growth and malignancy of biological tissues, as well as in neural development and progression of other diseases. Herein the first solution state structure of PTN was solved via nuclear magnetic resonance (NMR), with extensive characterization of its ability to bind GAG. Structurally, PTN consists of two -sheet domains connected by a short flexible linker, and flanked by long flexible termini. Broad distribution of positively charged amino acids in the protein’s sequence yields highly basic surfaces on the -sheet domains as well as highly cationic termini. With GAG chains themselves being linear anionic polymers, all interactions between these sugars and PTN are most exclusively driven through the electrostatic interactions between them, with no discernable specificity for GAG types. Moreover, this binding event is coordinated mostly through basic patches located in the C-Terminal domain (CTD). Although the flexible C- terminus has been shown to play a significant role in receptor binding, data here also reveal an adaptability of PTN to maintain high affinity interactions through its structured domains
when termini are removed. Additionally, analysis of binding information revealed for the first time the presence of a secondary GAG binding site within PTN. It is shown that PTN’s CTD constitutes the major binding site, while the N-terminal domain (NTD) contains the much weaker secondary site. Finally, compilation of high-resolution data containing the atomistic detail of PTN’s interaction with GAG provided the information necessary to produce the highest accuracy model to date of the PTN-GAG complex. Taken together, these findings provide means for specific targeting of this mitogenic cytokine in a wide array of biological applications.
ContributorsRyan, Eathen (Author) / Wang, Xu (Thesis advisor) / Yarger, Jeffery (Committee member) / Liu, Wei (Committee member) / Arizona State University (Publisher)
Created2020
Description
Integrins are a family of αβ heterodimeric transmembrane receptors. As an important class of adhesion receptors, integrins mediate cell adhesion, migration, and transformation through bidirectional signaling across the plasma membrane. Among the 24 different types of integrins, which are notorious for their capacity to recognize multiple ligands, the leukocyte integrin αMβ2 (Mac-1) is the most promiscuous member. In contrast to other integrins, Mac1 is unique with respect to its preference for cationic ligands. In this thesis, a new Mac-1 cationic ligand named pleiotrophin (PTN) is uncovered. PTN is an important cytokine and growth factor. Its activities in mitogenesis and angiogenesis have been extensively researched, but its function on immune cells was not widely explored. In this research, the cell biology and biochemical evidences show that PTN can regulate various Mac-1-expressing cells functions through the activation of the extracellular signal regulated kinases. Direct interactions between PTN and the αM I-domain, the major ligand-binding domain of Mac-1, has been shown using biolayer interferometry analyses and confirmed by solution NMR spectroscopy. The binding epitopes and the binding mechanism of PTN and αM I-domain interaction were further revealed by peptide array analysis and microscale thermophoresis. The data suggested that PTN’s thrombospondin type-1 repeat (TSR) domains and αM I-domain metal-ion-dependent adhesion site (MIDAS) are the major binding sites. In addition, this interaction followed a novel metal-ion independent binding mechanism which has not been found in other integrins. After a series of characterizations of αM I-domain using both experimental and computational methods, it showed that activated αM I-domain is significantly more dynamic than inactive αM I-domain, and the dynamics seem to modulate the effect of Mg2+ on its interactions with cationic ligands. To further explore the PTN induced Mac-1 structure rearrangement, intact Mac-1 was studied by negative stain electron microscopy. The results showed that the Mac-1 exhibited a very heterogeneous conformation distribution in detergents. In contrast, the Mac-1 adopted predominantly the bent conformation in phospholipid nanodisc condition. This Mac-1 nanodisc model provides a new platform for studying intact Mac-1 activation mechanism in a more physiologically relevant manner in the future.
ContributorsShen, Di (Author) / Wang, Xu (Thesis advisor) / Van Horn, Wade (Committee member) / Yarger, Jeffery (Committee member) / Arizona State University (Publisher)
Created2020