Matching Items (91)
Description
Filtration for microfluidic sample-collection devices is desirable for sample selection, concentration, preprocessing, and downstream manipulation, but microfabricating the required sub-micrometer filtration structure is an elaborate process. This thesis presents a simple method to fabricate polydimethylsiloxane (PDMS) devices with an integrated membrane filter that will sample, lyse, and extract the DNA

Filtration for microfluidic sample-collection devices is desirable for sample selection, concentration, preprocessing, and downstream manipulation, but microfabricating the required sub-micrometer filtration structure is an elaborate process. This thesis presents a simple method to fabricate polydimethylsiloxane (PDMS) devices with an integrated membrane filter that will sample, lyse, and extract the DNA from microorganisms in aqueous environments. An off-the-shelf membrane filter disc was embedded in a PDMS layer and sequentially bound with other PDMS channel layers. No leakage was observed during filtration. This device was validated by concentrating a large amount of cyanobacterium Synechocystis in simulated sample water with consistent performance across devices. After accumulating sufficient biomass on the filter, a sequential electrochemical lysing process was performed by applying 5VDC across the filter. This device was further evaluated by delivering several samples of differing concentrations of cyanobacterium Synechocystis then quantifying the DNA using real-time PCR. Lastly, an environmental sample was run through the device and the amount of photosynthetic microorganisms present in the water was determined. The major breakthroughs in this design are low energy demand, cheap materials, simple design, straightforward fabrication, and robust performance, together enabling wide-utility of similar chip-based devices for field-deployable operations in environmental micro-biotechnology.
ContributorsLecluse, Aurelie (Author) / Meldrum, Deirdre (Thesis advisor) / Chao, Joseph (Thesis advisor) / Westerhoff, Paul (Committee member) / Arizona State University (Publisher)
Created2011
Description
Single cell phenotypic heterogeneity studies reveal more information about the pathogenesis process than conventional bulk methods. Furthermore, investigation of the individual cellular response mechanism during rapid environmental changes can only be achieved at single cell level. By enabling the study of cellular morphology, a single cell three-dimensional (3D) imaging system

Single cell phenotypic heterogeneity studies reveal more information about the pathogenesis process than conventional bulk methods. Furthermore, investigation of the individual cellular response mechanism during rapid environmental changes can only be achieved at single cell level. By enabling the study of cellular morphology, a single cell three-dimensional (3D) imaging system can be used to diagnose fatal diseases, such as cancer, at an early stage. One proven method, CellCT, accomplishes 3D imaging by rotating a single cell around a fixed axis. However, some existing cell rotating mechanisms require either intricate microfabrication, and some fail to provide a suitable environment for living cells. This thesis develops a microvorterx chamber that allows living cells to be rotated by hydrodynamic alone while facilitating imaging access. In this thesis work, 1) the new chamber design was developed through numerical simulation. Simulations revealed that in order to form a microvortex in the side chamber, the ratio of the chamber opening to the channel width must be smaller than one. After comparing different chamber designs, the trapezoidal side chamber was selected because it demonstrated controllable circulation and met the imaging requirements. Microvortex properties were not sensitive to the chambers with interface angles ranging from 0.32 to 0.64. A similar trend was observed when chamber heights were larger than chamber opening. 2) Micro-particle image velocimetry was used to characterize microvortices and validate simulation results. Agreement between experimentation and simulation confirmed that numerical simulation was an effective method for chamber design. 3) Finally, cell rotation experiments were performed in the trapezoidal side chamber. The experimental results demonstrated cell rotational rates ranging from 12 to 29 rpm for regular cells. With a volumetric flow rate of 0.5 µL/s, an irregular cell rotated at a mean rate of 97 ± 3 rpm. Rotational rates can be changed by altering inlet flow rates.
ContributorsZhang, Wenjie (Author) / Frakes, David (Thesis advisor) / Meldrum, Deirdre (Thesis advisor) / Chao, Shih-hui (Committee member) / Wang, Xiao (Committee member) / Arizona State University (Publisher)
Created2011
151304-Thumbnail Image.png
Description
Food system and health characteristics were evaluated across the last Waorani hunter-gatherer group in Amazonian Ecuador and a remote neighboring Kichwa indigenous subsistence agriculture community. Hunter-gatherer food systems like the Waorani foragers may not only be nutritionally, but also pharmaceutically beneficial because of high dietary intake of varied plant phytochemical

Food system and health characteristics were evaluated across the last Waorani hunter-gatherer group in Amazonian Ecuador and a remote neighboring Kichwa indigenous subsistence agriculture community. Hunter-gatherer food systems like the Waorani foragers may not only be nutritionally, but also pharmaceutically beneficial because of high dietary intake of varied plant phytochemical compounds. A modern diet that reduces these dietary plant defense phytochemicals below levels typical in human evolutionary history may leave humans vulnerable to diseases that were controlled through a foraging diet. Few studies consider the health impact of the recent drastic reduction of plant phytochemical content in the modern global food system, which has eliminated essential components of food because they are not considered "nutrients". The antimicrobial and anti-inflammatory nature of the food system may not only regulate infectious pathogens and inflammatory disease, but also support beneficial microbes in human hosts, reducing vulnerability to chronic diseases. Waorani foragers seem immune to certain infections with very low rates of chronic disease. Does returning to certain characteristics of a foraging food system begin to restore the human body microbe balance and inflammatory response to evolutionary norms, and if so, what implication does this have for the treatment of disease? Several years of data on dietary and health differences across the foragers and the farmers was gathered. There were major differences in health outcomes across the board. In the Waorani forager group there were no signs of infection in serious wounds such as 3rd degree burns and spear wounds. The foragers had one-degree lower body temperature than the farmers. The Waorani had an absence of signs of chronic diseases including vision and blood pressure that did not change markedly with age while Kichwa farmers suffered from both chronic diseases and physiological indicators of aging. In the Waorani forager population, there was an absence of many common regional infectious diseases, from helminthes to staphylococcus. Study design helped control for confounders (exercise, environment, genetic factors, non-phytochemical dietary intake). This study provides evidence of the major role total phytochemical dietary intake plays in human health, often not considered by policymakers and nutritional and agricultural scientists.
ContributorsLondon, Douglas (Author) / Tsuda, Takeyuki (Thesis advisor) / Beezhold, Bonnie L (Committee member) / Hruschka, Daniel (Committee member) / Eder, James (Committee member) / Arizona State University (Publisher)
Created2012
Description
Laboratory automation systems have seen a lot of technological advances in recent times. As a result, the software that is written for them are becoming increasingly sophisticated. Existing software architectures and standards are targeted to a wider domain of software development and need to be customized in order to use

Laboratory automation systems have seen a lot of technological advances in recent times. As a result, the software that is written for them are becoming increasingly sophisticated. Existing software architectures and standards are targeted to a wider domain of software development and need to be customized in order to use them for developing software for laboratory automation systems. This thesis proposes an architecture that is based on existing software architectural paradigms and is specifically tailored to developing software for a laboratory automation system. The architecture is based on fairly autonomous software components that can be distributed across multiple computers. The components in the architecture make use of asynchronous communication methodologies that are facilitated by passing messages between one another. The architecture can be used to develop software that is distributed, responsive and thread-safe. The thesis also proposes a framework that has been developed to implement the ideas proposed by the architecture. The framework is used to develop software that is scalable, distributed, responsive and thread-safe. The framework currently has components to control very commonly used laboratory automation devices such as mechanical stages, cameras, and also to do common laboratory automation functionalities such as imaging.
ContributorsKuppuswamy, Venkataramanan (Author) / Meldrum, Deirdre (Thesis advisor) / Collofello, James (Thesis advisor) / Sarjoughian, Hessam S. (Committee member) / Johnson, Roger (Committee member) / Arizona State University (Publisher)
Created2012
150552-Thumbnail Image.png
Description
This dissertation is intended to tie together a body of work which utilizes a variety of methods to study applied mathematical models involving heterogeneity often omitted with classical modeling techniques. I posit three cogent classifications of heterogeneity: physiological, behavioral, and local (specifically connectivity in this work). I consider physiological heterogeneity

This dissertation is intended to tie together a body of work which utilizes a variety of methods to study applied mathematical models involving heterogeneity often omitted with classical modeling techniques. I posit three cogent classifications of heterogeneity: physiological, behavioral, and local (specifically connectivity in this work). I consider physiological heterogeneity using the method of transport equations to study heterogeneous susceptibility to diseases in open populations (those with births and deaths). I then present three separate models of behavioral heterogeneity. An SIS/SAS model of gonorrhea transmission in a population of highly active men-who-have-sex-with-men (MSM) is presented to study the impact of safe behavior (prevention and self-awareness) on the prevalence of this endemic disease. Behavior is modeled in this examples via static parameters describing consistent condom use and frequency of STD testing. In an example of behavioral heterogeneity, in the absence of underlying dynamics, I present a generalization to ``test theory without an answer key" (also known as cultural consensus modeling or CCM). CCM is commonly used to study the distribution of cultural knowledge within a population. The generalized framework presented allows for selecting the best model among various extensions of CCM: multiple subcultures, estimating the degree to which individuals guess yes, and making competence homogenous in the population. This permits model selection based on the principle of information criteria. The third behaviorally heterogeneous model studies adaptive behavioral response based on epidemiological-economic theory within an $SIR$ epidemic setting. Theorems used to analyze the stability of such models with a generalized, non-linear incidence structure are adapted and applied to the case of standard incidence and adaptive incidence. As an example of study in spatial heterogeneity I provide an explicit solution to a generalization of the continuous time approximation of the Albert-Barabasi scale-free network algorithm. The solution is found by recursively solving the differential equations via integrating factors, identifying a pattern for the coefficients and then proving this observed pattern is consistent using induction. An application to disease dynamics on such evolving structures is then studied.
ContributorsMorin, Benjamin (Author) / Castillo-Chavez, Carlos (Thesis advisor) / Hiebeler, David (Thesis advisor) / Hruschka, Daniel (Committee member) / Suslov, Sergei (Committee member) / Arizona State University (Publisher)
Created2012
151177-Thumbnail Image.png
Description
Single cell analysis has become increasingly important in understanding disease onset, progression, treatment and prognosis, especially when applied to cancer where cellular responses are highly heterogeneous. Through the advent of single cell computerized tomography (Cell-CT), researchers and clinicians now have the ability to obtain high resolution three-dimensional (3D) reconstructions of

Single cell analysis has become increasingly important in understanding disease onset, progression, treatment and prognosis, especially when applied to cancer where cellular responses are highly heterogeneous. Through the advent of single cell computerized tomography (Cell-CT), researchers and clinicians now have the ability to obtain high resolution three-dimensional (3D) reconstructions of single cells. Yet to date, no live-cell compatible version of the technology exists. In this thesis, a microfluidic chip with the ability to rotate live single cells in hydrodynamic microvortices about an axis parallel to the optical focal plane has been demonstrated. The chip utilizes a novel 3D microchamber design arranged beneath a main channel creating flow detachment into the chamber, producing recirculating flow conditions. Single cells are flowed through the main channel, held in the center of the microvortex by an optical trap, and rotated by the forces induced by the recirculating fluid flow. Computational fluid dynamics (CFD) was employed to optimize the geometry of the microchamber. Two methods for the fabrication of the 3D microchamber were devised: anisotropic etching of silicon and backside diffuser photolithography (BDPL). First, the optimization of the silicon etching conditions was demonstrated through design of experiment (DOE). In addition, a non-conventional method of soft-lithography was demonstrated which incorporates the use of two positive molds, one of the main channel and the other of the microchambers, compressed together during replication to produce a single ultra-thin (<200 µm) negative used for device assembly. Second, methods for using thick negative photoresists such as SU-8 with BDPL have been developed which include a new simple and effective method for promoting the adhesion of SU-8 to glass. An assembly method that bonds two individual ultra-thin (<100 µm) replications of the channel and the microfeatures has also been demonstrated. Finally, a pressure driven pumping system with nanoliter per minute flow rate regulation, sub-second response times, and < 3% flow variability has been designed and characterized. The fabrication and assembly of this device is inexpensive and utilizes simple variants of conventional microfluidic fabrication techniques, making it easily accessible to the single cell analysis community.
ContributorsMyers, Jakrey R (Author) / Meldrum, Deirdre (Thesis advisor) / Johnson, Roger (Committee member) / Frakes, David (Committee member) / Arizona State University (Publisher)
Created2012
136417-Thumbnail Image.png
Description
Due to persistent undernutrition in India and the increased demands placed on a woman’s body during childbearing and lactation, the Indian government has implemented a program to provide supplemental nutrition packets to women in rural India. This study examines the factors influencing uptake of nutritional packets by lactating mothers in

Due to persistent undernutrition in India and the increased demands placed on a woman’s body during childbearing and lactation, the Indian government has implemented a program to provide supplemental nutrition packets to women in rural India. This study examines the factors influencing uptake of nutritional packets by lactating mothers in southern, rural Rajasthan. Women were recruited from 65 villages in Rajasthan, India (n=149, minimum of 2 per village) to evaluate the relationship of nutrition packet uptake and two factors--education levels and distance to the health center.
Level of education had little impact on whether or not women received the nutrition packet. Of those women with no education, 63.1% received the packet. Of those with any education, 63.9% got the packet.
In contrast, distance was strongly correlated with whether or not women received the packet. For example, of the women living within 200 meters of the health center, 93.2% received a nutrition packet. Of the women living between 250 meters and one kilometer of the health center, 68.4% received a nutrition packet. Of the women living over one kilometer from the health center, only 25% received a nutrition packet. The relationship between uptake of packets and women’s perception of distance to the health center was also explored. Out of 50 women who did not receive the packet, all of the women who said there was no health center in their village did live more than one kilometer from a health center. Of the women who lived between 250 meters and one kilometer from the health center, 40% felt it was too far. Of the women who lived more than a kilometer from the health center, 66.7% felt it was too far and 29.6% said there was no health center in their village. Again, it does not appear that ‘too far’ is just a default reason for women, but that actual distance, more so than education, is a major contributing factor in their ability to take the nutrition packet. These findings suggest that improving access to supplemental nutrition packets at the village level may increase uptake by the women.
ContributorsJeffers, Eva Marie (Author) / Hruschka, Daniel (Thesis director) / Maupin, Jonathan (Committee member) / Cook, Jeffrey (Committee member) / Barrett, The Honors College (Contributor) / School of Human Evolution and Social Change (Contributor)
Created2015-05
135595-Thumbnail Image.png
Description
2015 marks the deadline for the UN Millennium Development Goal 5 to reduce global maternal mortality rate (MMR) by 75% since 1990. As of 2015, MMR has only been reduced by 45%. Many international organizations claim that more medically trained midwives can meet global maternal health care needs. This study

2015 marks the deadline for the UN Millennium Development Goal 5 to reduce global maternal mortality rate (MMR) by 75% since 1990. As of 2015, MMR has only been reduced by 45%. Many international organizations claim that more medically trained midwives can meet global maternal health care needs. This study investigates two major questions. What is the role of midwives in diverse international maternal healthcare contexts? How do midwives in these different contexts define their roles and the barriers to providing the best care for women? From May to August 2015, I conducted over 70 interviews with midwives in Netherlands, Sweden, Rwanda, Bangladesh, Australia and Guatemala, interviewing between 6 and 13 midwives from each country. The majority of midwives defined their roles as supporting women's individual capacities and power through normal birth, and knowing when to refer when high-risk complications arise. Although thematic barriers vary by country, midwives in all countries believed that maternal healthcare can be improved by increased collaboration between midwives and other health care professionals, better access to culturally appropriate services, and greater public awareness of the role of midwives.
ContributorsCarson, Anna Elizabeth (Author) / Hruschka, Daniel (Thesis director) / Maupin, Jonathan (Committee member) / School of International Letters and Cultures (Contributor) / School of Human Evolution and Social Change (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
136676-Thumbnail Image.png
Description
How are perceptions of morality and disgust regarding meat consumption related to each other? Which factor is more salient in determining one's willingness to eat the meat of a specific animal? How do these answers vary across religious groups? This study investigates the ways that concepts like morality and disgust

How are perceptions of morality and disgust regarding meat consumption related to each other? Which factor is more salient in determining one's willingness to eat the meat of a specific animal? How do these answers vary across religious groups? This study investigates the ways that concepts like morality and disgust are related to food preferences and hopes to shed light on the mechanisms that enforce culturally sanctioned food taboos. The study compares 4 groups of people in the U.S.: Christians (n = 39), Hindus (n = 29), Jews (n = 23), and non-religious people (n = 63). A total of 154 participants were given surveys in which they rated their feelings about eating various animals. Data from Christian and non-religious groups exhibited similar patterns such as a high likelihood of eating a given animal when starving, while results from Jews and Hindus were consistent with their religion's respective food taboos. Despite these differences, morality and disgust are strongly correlated with one another in almost all instances. Moreover, morality and disgust are almost equally important considerations when determining willingness to eat when starving.
ContributorsParekh, Shaili Rajul (Author) / Hruschka, Daniel (Thesis director) / Jacobs, Mark (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor) / School of Human Evolution and Social Change (Contributor) / Hugh Downs School of Human Communication (Contributor)
Created2014-12
137046-Thumbnail Image.png
Description
The United States is experiencing an increase in the prevalence and influence of complementary and alternative medicine (CAM) in patient healthcare, reflecting the increasingly positive public and professional attitudes on the use of CAM therapies. Despite the growing presence of CAM in U.S. healthcare, there are still many barriers to

The United States is experiencing an increase in the prevalence and influence of complementary and alternative medicine (CAM) in patient healthcare, reflecting the increasingly positive public and professional attitudes on the use of CAM therapies. Despite the growing presence of CAM in U.S. healthcare, there are still many barriers to integration. This study aims to reveal the attitudes of conventional, integrative and CAM practitioners concerning the major challenges of CAM's integration, explore their proposed solutions, and reveal any discrepancies in these attitudes among different types of practitioners. Twenty-eight practitioners were interviewed on the challenges in the five facets of CAM's integration: integration into hospitals, integration into medical schools, insurance coverage for CAM, licensing & regulation of CAM practitioners, and clinical research in CAM. The overall positive attitudes on the benefits of CAM's integration support previous research on the subject; however, the conventional practitioners were unable to extend these benefits to real-world application, and they were unaware of many of the challenges facing CAM's integration. The CAM practitioners attributed many of the problems facing integration to the inability of CAM's philosophy to comply with the current ideology of medical academia, health insurance model, and laws that govern the licensing and regulation of medical practitioners. The CAM and integrative practitioners perceived there to be a large resistance from conventional practitioners, specifically concerning the integration of CAM into education, providing insurance coverage for CAM, and the licensing and regulation of CAM practitioners. They attributed this to a perceived lack of research on safe and effective treatments in CAM. The conventional practitioner responses reflected this weariness of treatment effectiveness in their responses. However, the CAM and integrative practitioners believed these claims to be largely inaccurate, and constructed by the influence and manipulation of large-scale medical corporations and organizations. The participants believed that more evidence-based research in CAM, and increased public awareness in CAM therapies will force conventional practitioners to increase their knowledge in CAM, helping to alleviate their fears and skepticism of CAM therapies. By easing these concerns, dialogue can occur among practitioners of different modalities that will help to ensure a smooth integration of CAM and will raise the quality of patient healthcare by providing safe and effective resources for alternate forms of treatment.
ContributorsJohnston, Shantele Hanna Lee (Author) / Hruschka, Daniel (Thesis director) / Hurlbut, Ben (Committee member) / Barrett, The Honors College (Contributor) / School of International Letters and Cultures (Contributor) / School of Human Evolution and Social Change (Contributor)
Created2014-05