Matching Items (243)
150035-Thumbnail Image.png
Description
Concrete columns constitute the fundamental supports of buildings, bridges, and various other infrastructures, and their failure could lead to the collapse of the entire structure. As such, great effort goes into improving the fire resistance of such columns. In a time sensitive fire situation, a delay in the failure of

Concrete columns constitute the fundamental supports of buildings, bridges, and various other infrastructures, and their failure could lead to the collapse of the entire structure. As such, great effort goes into improving the fire resistance of such columns. In a time sensitive fire situation, a delay in the failure of critical load bearing structures can lead to an increase in time allowed for the evacuation of occupants, recovery of property, and access to the fire. Much work has been done in improving the structural performance of concrete including reducing column sizes and providing a safer structure. As a result, high-strength (HS) concrete has been developed to fulfill the needs of such improvements. HS concrete varies from normal-strength (NS) concrete in that it has a higher stiffness, lower permeability and larger durability. This, unfortunately, has resulted in poor performance under fire. The lower permeability allows for water vapor to build up causing HS concrete to suffer from explosive spalling under rapid heating. In addition, the coefficient of thermal expansion (CTE) of HS concrete is lower than that of NS concrete. In this study, the effects of introducing a region of crumb rubber concrete into a steel-reinforced concrete column were analyzed. The inclusion of crumb rubber concrete into a column will greatly increase the thermal resistivity of the overall column, leading to a reduction in core temperature as well as the rate at which the column is heated. Different cases were analyzed while varying the positioning of the crumb-rubber region to characterize the effect of position on the improvement of fire resistance. Computer simulated finite element analysis was used to calculate the temperature and strain distribution with time across the column's cross-sectional area with specific interest in the steel - concrete region. Of the several cases which were investigated, it was found that the improvement of time before failure ranged between 32 to 45 minutes.
ContributorsZiadeh, Bassam Mohammed (Author) / Phelan, Patrick (Thesis advisor) / Kaloush, Kamil (Thesis advisor) / Jiang, Hanqing (Committee member) / Arizona State University (Publisher)
Created2011
149676-Thumbnail Image.png
Description
Locomotion of microorganisms is commonly observed in nature. Although microorganism locomotion is commonly attributed to mechanical deformation of solid appendages, in 1956 Nobel Laureate Peter Mitchell proposed that an asymmetric ion flux on a bacterium's surface could generate electric fields that drive locomotion via self-electrophoresis. Recent advances in nanofabrication have

Locomotion of microorganisms is commonly observed in nature. Although microorganism locomotion is commonly attributed to mechanical deformation of solid appendages, in 1956 Nobel Laureate Peter Mitchell proposed that an asymmetric ion flux on a bacterium's surface could generate electric fields that drive locomotion via self-electrophoresis. Recent advances in nanofabrication have enabled the engineering of synthetic analogues, bimetallic colloidal particles, that swim due to asymmetric ion flux originally proposed by Mitchell. Bimetallic colloidal particles swim through aqueous solutions by converting chemical fuel to fluid motion through asymmetric electrochemical reactions. This dissertation presents novel bimetallic motor fabrication strategies, motor functionality, and a study of the motor collective behavior in chemical concentration gradients. Brownian dynamics simulations and experiments show that the motors exhibit chemokinesis, a motile response to chemical gradients that results in net migration and concentration of particles. Chemokinesis is typically observed in living organisms and distinct from chemotaxis in that there is no particle directional sensing. The synthetic motor chemokinesis observed in this work is due to variation in the motor's velocity and effective diffusivity as a function of the fuel and salt concentration. Static concentration fields are generated in microfluidic devices fabricated with porous walls. The development of nanoscale particles that swim autonomously and collectively in chemical concentration gradients can be leveraged for a wide range of applications such as directed drug delivery, self-healing materials, and environmental remediation.
ContributorsWheat, Philip Matthew (Author) / Posner, Jonathan D (Thesis advisor) / Phelan, Patrick (Committee member) / Chen, Kangping (Committee member) / Buttry, Daniel (Committee member) / Calhoun, Ronald (Committee member) / Arizona State University (Publisher)
Created2011
150392-Thumbnail Image.png
Description
In this thesis the performance of a Hybrid AC System (HACS) is modeled and optimized. The HACS utilizes solar photovoltaic (PV) panels to help reduce the demand from the utility during peak hours. The system also includes an ice Thermal Energy Storage (TES) tank to accumulate cooling energy during off-peak

In this thesis the performance of a Hybrid AC System (HACS) is modeled and optimized. The HACS utilizes solar photovoltaic (PV) panels to help reduce the demand from the utility during peak hours. The system also includes an ice Thermal Energy Storage (TES) tank to accumulate cooling energy during off-peak hours. The AC runs continuously on grid power during off-peak hours to generate cooling for the house and to store thermal energy in the TES. During peak hours, the AC runs on the power supplied from the PV, and cools the house along with the energy stored in the TES. A higher initial cost is expected due to the additional components of the HACS (PV and TES), but a lower operational cost due to higher energy efficiency, energy storage and renewable energy utilization. A house cooled by the HACS will require a smaller size AC unit (about 48% less in the rated capacity), compared to a conventional AC system. To compare the cost effectiveness of the HACS with a regular AC system, time-of-use (TOU) utility rates are considered, as well as the cost of the system components and the annual maintenance. The model shows that the HACS pays back its initial cost of $28k in about 6 years with an 8% APR, and saves about $45k in total cost when compared to a regular AC system that cools the same house for the same period of 6 years.
ContributorsJubran, Sadiq (Author) / Phelan, Patrick (Thesis advisor) / Calhoun, Ronald (Committee member) / Trimble, Steve (Committee member) / Arizona State University (Publisher)
Created2011
Description
As the demand for power increases in populated areas, so will the demand for water. Current power plant technology relies heavily on the Rankine cycle in coal, nuclear and solar thermal power systems which ultimately use condensers to cool the steam in the system. In dry climates, the amount of

As the demand for power increases in populated areas, so will the demand for water. Current power plant technology relies heavily on the Rankine cycle in coal, nuclear and solar thermal power systems which ultimately use condensers to cool the steam in the system. In dry climates, the amount of water to cool off the condenser can be extremely large. Current wet cooling technologies such as cooling towers lose water from evaporation. One alternative to prevent this would be to implement a radiative cooling system. More specifically, a system that utilizes the volumetric radiation emission from water to the night sky could be implemented. This thesis analyzes the validity of a radiative cooling system that uses direct radiant emission to cool water. A brief study on potential infrared transparent cover materials such as polyethylene (PE) and polyvinyl carbonate (PVC) was performed. Also, two different experiments to determine the cooling power from radiation were developed and run. The results showed a minimum cooling power of 33.7 W/m2 for a vacuum insulated glass system and 37.57 W/m2 for a tray system with a maximum of 98.61 Wm-2 at a point when conduction and convection heat fluxes were considered to be zero. The results also showed that PE proved to be the best cover material. The minimum numerical results compared well with other studies performed in the field using similar techniques and materials. The results show that a radiative cooling system for a power plant could be feasible given that the cover material selection is narrowed down, an ample amount of land is available and an economic analysis is performed proving it to be cost competitive with conventional systems.
ContributorsOvermann, William (Author) / Phelan, Patrick (Thesis advisor) / Trimble, Steve (Committee member) / Taylor, Robert (Committee member) / Arizona State University (Publisher)
Created2011
150339-Thumbnail Image.png
Description
A low cost expander, combustor device that takes compressed air, adds thermal energy and then expands the gas to drive an electrical generator is to be designed by modifying an existing reciprocating spark ignition engine. The engine used is the 6.5 hp Briggs and Stratton series 122600 engine. Compressed air

A low cost expander, combustor device that takes compressed air, adds thermal energy and then expands the gas to drive an electrical generator is to be designed by modifying an existing reciprocating spark ignition engine. The engine used is the 6.5 hp Briggs and Stratton series 122600 engine. Compressed air that is stored in a tank at a particular pressure will be introduced during the compression stage of the engine cycle to reduce pump work. In the modified design the intake and exhaust valve timings are modified to achieve this process. The time required to fill the combustion chamber with compressed air to the storage pressure immediately before spark and the state of the air with respect to crank angle is modeled numerically using a crank step energy and mass balance model. The results are used to complete the engine cycle analysis based on air standard assumptions and air to fuel ratio of 15 for gasoline. It is found that at the baseline storage conditions (280 psi, 70OF) the modified engine does not meet the imposed constraints of staying below the maximum pressure of the unmodified engine. A new storage pressure of 235 psi is recommended. This only provides a 7.7% increase in thermal efficiency for the same work output. The modification of this engine for this low efficiency gain is not recommended.
ContributorsJoy, Lijin (Author) / Trimble, Steve (Thesis advisor) / Davidson, Joseph (Committee member) / Phelan, Patrick (Committee member) / Arizona State University (Publisher)
Created2011
Description

Consider Steven Cryos’ words, “When disaster strikes, the time to prepare has passed.” Witnessing domestic water insecurity in events such as Hurricane Katrina, the instability in Flint, Michigan, and most recently the winter storms affecting millions across Texas, we decided to take action. The period between a water supply’s disruption

Consider Steven Cryos’ words, “When disaster strikes, the time to prepare has passed.” Witnessing domestic water insecurity in events such as Hurricane Katrina, the instability in Flint, Michigan, and most recently the winter storms affecting millions across Texas, we decided to take action. The period between a water supply’s disruption and restoration is filled with anxiety, uncertainty, and distress -- particularly since there is no clear indication of when, exactly, restoration comes. It is for this reason that Water Works now exists. As a team of students from diverse backgrounds, what started as an honors project with the Founders Lab at Arizona State University became the seed that will continue to mature into an economically sustainable business model supporting the optimistic visions and tenants of humanitarianism. By having conversations with community members, conducting market research, competing for funding and fostering progress amid the COVID-19 pandemic, our team’s problem-solving traverses the disciplines. The purpose of this paper is to educate our readers about a unique solution to emerging issues of water insecurity that are nested across and within systems who could benefit from the introduction of a personal water reclamation system, showcase our team’s entrepreneurial journey, and propose future directions that will this once pedagogical exercise to continue fulfilling its mission: To heal, to hydrate and to help bring safe water to everyone.

ContributorsReitzel, Gage Alexander (Co-author) / Filipek, Marina (Co-author) / Sadiasa, Aira (Co-author) / Byrne, Jared (Thesis director) / Sebold, Brent (Committee member) / Historical, Philosophical & Religious Studies (Contributor) / School of Human Evolution & Social Change (Contributor, Contributor) / Historical, Philosophical & Religious Studies, Sch (Contributor) / Department of Psychology (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
147847-Thumbnail Image.png
Description

The Constitution is a document that was made over 200 years ago by a population that could have never imagined the type of technology or social advances made in the 21st century. This creates a natural rift between governing ideals between then and now, that needs to be addressed. Rather

The Constitution is a document that was made over 200 years ago by a population that could have never imagined the type of technology or social advances made in the 21st century. This creates a natural rift between governing ideals between then and now, that needs to be addressed. Rather than holding the values of the nation to a time when people were not considered citizens because of the color of their skin, there need to be updates made to the Constitution itself. The need for change and the mechanisms were both established by the Framers while creating and advancing the Constitution. The ideal process to go about these changes is split between the formal Article V amendment process and judicial activism. The amendment process has infinite scope for changes that can be done, but due to the challenge involved in trying to pass any form of the amendment through both State and Federal Congresses, that process should be reserved for only fundamental or structural changes. Judicial activism, by way of Supreme Court decisions, is a method best applied to the protection of people’s rights.

Created2021-05
148172-Thumbnail Image.png
Description

Increasing reliable produce farming and clean energy generation in the southwestern United States will be important for increasing the food supply for a growing population and reducing reliance on fossil fuels to generate energy. Combining greenhouses with photovoltaic (PV) films can allow both food and electric power to be produced

Increasing reliable produce farming and clean energy generation in the southwestern United States will be important for increasing the food supply for a growing population and reducing reliance on fossil fuels to generate energy. Combining greenhouses with photovoltaic (PV) films can allow both food and electric power to be produced simultaneously. This study tests if the combination of semi-transparent PV films and a transmission control layer can generate energy and spectrally control the transmission of light into a greenhouse. Testing the layer combinations in a variety of real-world conditions, it was shown that light can be spectrally controlled in a greenhouse. The transmission was overall able to be controlled by an average of 11.8% across the spectrum of sunlight, with each semi-transparent PV film able to spectrally select transmission of light in both the visible and near-infrared light wavelength. The combination of layers was also able to generate energy at an average efficiency of 8.71% across all panels and testing conditions. The most efficient PV film was the blue dyed, at 9.12%. This study also suggests additional improvements for this project, including the removal of the red PV film due to inefficiencies in spectral selection and additional tests with new materials to optimize plant growth and energy generation in a variety of light conditions.

ContributorsGunderson, Evan (Author) / Phelan, Patrick (Thesis director) / Villalobos, Rene (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
148052-Thumbnail Image.png
Description

The thesis analyzes the apathetic youth turnout myth and researches to see if voter suppression can explain the reason behind low youth turnout. This thesis is a study done with Arizona State University students to assess their level of voter turnout, their levels of political engagement, and if they have

The thesis analyzes the apathetic youth turnout myth and researches to see if voter suppression can explain the reason behind low youth turnout. This thesis is a study done with Arizona State University students to assess their level of voter turnout, their levels of political engagement, and if they have experienced voter suppression. Respondents were also asked about the support given by ASU in terms of helping with the voting process. Results indicate that Arizona State students have high levels of political engagement, and that 1 in 5 ASU students have experienced voter suppression. Furthermore, ASU students on a whole are uncertain about the role ASU should play in supporting students with the voting process.

Created2021-05
147987-Thumbnail Image.png
Description

As political campaigning becomes increasingly digital and data-driven, data privacy has become a question of democratic governance. Yet, Congress has yet to pass a comprehensive federal data privacy law and even the strongest subnational data privacy laws exempt political campaigns from regulation. <br/><br/>This thesis examines how data privacy laws impact

As political campaigning becomes increasingly digital and data-driven, data privacy has become a question of democratic governance. Yet, Congress has yet to pass a comprehensive federal data privacy law and even the strongest subnational data privacy laws exempt political campaigns from regulation. <br/><br/>This thesis examines how data privacy laws impact data-driven and digital political campaigning. Specifically, it investigates what information is incorporated into the political data ecosystem, how data privacy laws regulate the collection of this data, and how actors in the political data ecosystem respond to these laws. It examines both sector-specific federal law and subnational data protection regulation through a case study of California. This research suggests that although the California Consumer Privacy Act and California Privacy Rights Act are landmark steps in American data protection, subnational data privacy law remains inhibited by the federal market-based approach.

ContributorsScovil, Daiva Julija (Author) / Gary, Marchant (Thesis director) / K, Royal (Committee member) / Historical, Philosophical & Religious Studies (Contributor, Contributor) / School of Politics and Global Studies (Contributor, Contributor) / Historical, Philosophical & Religious Studies, Sch (Contributor, Contributor) / Watts College of Public Service & Community Solut (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05