Matching Items (75)
Description
Filtration for microfluidic sample-collection devices is desirable for sample selection, concentration, preprocessing, and downstream manipulation, but microfabricating the required sub-micrometer filtration structure is an elaborate process. This thesis presents a simple method to fabricate polydimethylsiloxane (PDMS) devices with an integrated membrane filter that will sample, lyse, and extract the DNA from microorganisms in aqueous environments. An off-the-shelf membrane filter disc was embedded in a PDMS layer and sequentially bound with other PDMS channel layers. No leakage was observed during filtration. This device was validated by concentrating a large amount of cyanobacterium Synechocystis in simulated sample water with consistent performance across devices. After accumulating sufficient biomass on the filter, a sequential electrochemical lysing process was performed by applying 5VDC across the filter. This device was further evaluated by delivering several samples of differing concentrations of cyanobacterium Synechocystis then quantifying the DNA using real-time PCR. Lastly, an environmental sample was run through the device and the amount of photosynthetic microorganisms present in the water was determined. The major breakthroughs in this design are low energy demand, cheap materials, simple design, straightforward fabrication, and robust performance, together enabling wide-utility of similar chip-based devices for field-deployable operations in environmental micro-biotechnology.
ContributorsLecluse, Aurelie (Author) / Meldrum, Deirdre (Thesis advisor) / Chao, Joseph (Thesis advisor) / Westerhoff, Paul (Committee member) / Arizona State University (Publisher)
Created2011
Description
Single cell phenotypic heterogeneity studies reveal more information about the pathogenesis process than conventional bulk methods. Furthermore, investigation of the individual cellular response mechanism during rapid environmental changes can only be achieved at single cell level. By enabling the study of cellular morphology, a single cell three-dimensional (3D) imaging system can be used to diagnose fatal diseases, such as cancer, at an early stage. One proven method, CellCT, accomplishes 3D imaging by rotating a single cell around a fixed axis. However, some existing cell rotating mechanisms require either intricate microfabrication, and some fail to provide a suitable environment for living cells. This thesis develops a microvorterx chamber that allows living cells to be rotated by hydrodynamic alone while facilitating imaging access. In this thesis work, 1) the new chamber design was developed through numerical simulation. Simulations revealed that in order to form a microvortex in the side chamber, the ratio of the chamber opening to the channel width must be smaller than one. After comparing different chamber designs, the trapezoidal side chamber was selected because it demonstrated controllable circulation and met the imaging requirements. Microvortex properties were not sensitive to the chambers with interface angles ranging from 0.32 to 0.64. A similar trend was observed when chamber heights were larger than chamber opening. 2) Micro-particle image velocimetry was used to characterize microvortices and validate simulation results. Agreement between experimentation and simulation confirmed that numerical simulation was an effective method for chamber design. 3) Finally, cell rotation experiments were performed in the trapezoidal side chamber. The experimental results demonstrated cell rotational rates ranging from 12 to 29 rpm for regular cells. With a volumetric flow rate of 0.5 µL/s, an irregular cell rotated at a mean rate of 97 ± 3 rpm. Rotational rates can be changed by altering inlet flow rates.
ContributorsZhang, Wenjie (Author) / Frakes, David (Thesis advisor) / Meldrum, Deirdre (Thesis advisor) / Chao, Shih-hui (Committee member) / Wang, Xiao (Committee member) / Arizona State University (Publisher)
Created2011
Description
Laboratory automation systems have seen a lot of technological advances in recent times. As a result, the software that is written for them are becoming increasingly sophisticated. Existing software architectures and standards are targeted to a wider domain of software development and need to be customized in order to use them for developing software for laboratory automation systems. This thesis proposes an architecture that is based on existing software architectural paradigms and is specifically tailored to developing software for a laboratory automation system. The architecture is based on fairly autonomous software components that can be distributed across multiple computers. The components in the architecture make use of asynchronous communication methodologies that are facilitated by passing messages between one another. The architecture can be used to develop software that is distributed, responsive and thread-safe. The thesis also proposes a framework that has been developed to implement the ideas proposed by the architecture. The framework is used to develop software that is scalable, distributed, responsive and thread-safe. The framework currently has components to control very commonly used laboratory automation devices such as mechanical stages, cameras, and also to do common laboratory automation functionalities such as imaging.
ContributorsKuppuswamy, Venkataramanan (Author) / Meldrum, Deirdre (Thesis advisor) / Collofello, James (Thesis advisor) / Sarjoughian, Hessam S. (Committee member) / Johnson, Roger (Committee member) / Arizona State University (Publisher)
Created2012
Description
Single cell analysis has become increasingly important in understanding disease onset, progression, treatment and prognosis, especially when applied to cancer where cellular responses are highly heterogeneous. Through the advent of single cell computerized tomography (Cell-CT), researchers and clinicians now have the ability to obtain high resolution three-dimensional (3D) reconstructions of single cells. Yet to date, no live-cell compatible version of the technology exists. In this thesis, a microfluidic chip with the ability to rotate live single cells in hydrodynamic microvortices about an axis parallel to the optical focal plane has been demonstrated. The chip utilizes a novel 3D microchamber design arranged beneath a main channel creating flow detachment into the chamber, producing recirculating flow conditions. Single cells are flowed through the main channel, held in the center of the microvortex by an optical trap, and rotated by the forces induced by the recirculating fluid flow. Computational fluid dynamics (CFD) was employed to optimize the geometry of the microchamber. Two methods for the fabrication of the 3D microchamber were devised: anisotropic etching of silicon and backside diffuser photolithography (BDPL). First, the optimization of the silicon etching conditions was demonstrated through design of experiment (DOE). In addition, a non-conventional method of soft-lithography was demonstrated which incorporates the use of two positive molds, one of the main channel and the other of the microchambers, compressed together during replication to produce a single ultra-thin (<200 µm) negative used for device assembly. Second, methods for using thick negative photoresists such as SU-8 with BDPL have been developed which include a new simple and effective method for promoting the adhesion of SU-8 to glass. An assembly method that bonds two individual ultra-thin (<100 µm) replications of the channel and the microfeatures has also been demonstrated. Finally, a pressure driven pumping system with nanoliter per minute flow rate regulation, sub-second response times, and < 3% flow variability has been designed and characterized. The fabrication and assembly of this device is inexpensive and utilizes simple variants of conventional microfluidic fabrication techniques, making it easily accessible to the single cell analysis community.
ContributorsMyers, Jakrey R (Author) / Meldrum, Deirdre (Thesis advisor) / Johnson, Roger (Committee member) / Frakes, David (Committee member) / Arizona State University (Publisher)
Created2012
Description
I travelled and worked in international fisheries policy for 7 months in preparation for this thesis. During this time I completed one internship in Rome, Italy with the Food and Agriculture Organization of the United Nations (UNFAO) and another internship on the island of Pohnpei with the Secretariat of the Western and Central Pacific Fisheries Commission (WCPFC). From these experiences, I selected the subject of this thesis. My thesis analyzes the management system for South Pacific albacore tuna, the source stock for brands like "Chicken of the Sea" and "Starkist". South Pacific albacore tuna pass through international waters and the waters of several Pacific Island countries and territories, necessitating States to cooperate and coordinate to sustain the future viability of the stock. A case study for transboundary natural resource management, I discuss the institutional complexity that arises from managing such a resource. I use common-pool resource (CPR) theory to describe this complexity, which frames natural resource management as a collective-action problem among resource users. I first conceptualize the management system as having multiple institutional scales and multiple levels of organization. Then, employing Ostrom's 8 design principles for successful CPR management, I conduct a multi-institution analysis of the international, regional, and subregional institutions that participate in the management system. Finally, I also conduct a cross-institution analysis by examining the interactions between these institutions. I find that significant space for theoretical development exists in CPR theory for understanding complex management systems for transboundary natural resources. Furthermore, I find that interactions between institutions create linkages that could be retooled to improve the performance of the South Pacific albacore tuna management system.
ContributorsAbolhassani, Angela Maryam (Author) / Abbott, Kenneth (Thesis director) / Schoon, Michael (Committee member) / Barrett, The Honors College (Contributor) / School of Politics and Global Studies (Contributor) / School of Life Sciences (Contributor) / Department of English (Contributor)
Created2015-05
Description
This paper explores two areas of study: Colony Collapse Disorder and urban apiculture--the practice of keeping bees in urban areas. Additionally, this paper discusses the ways in which Colony Collapse Disorder has encouraged an increase in urban beekeeping, and the possible role of urban apiculture as a means of combatting the negative effects of Colony Collapse Disorder. The symptoms, history, and possible causes of Colony Collapse Disorder are presented, as well as the important role that honey bees play in human agriculture. Following the discussion of Colony Collapse Disorder is a description of my urban beekeeping apprenticeship at Desert Marigold School where I kept bees, researched various hives, attended a beekeeping workshop in Tucson, and eventually built a hive and established a colony with my mentor. This paper includes a guide to beekeeping basics, as well as a guide to starting a hive based upon the lessons learned during my apprenticeship.
ContributorsRomero, Madelyn Rattan (Author) / Schoon, Michael (Thesis director) / Silcox, Holly (Committee member) / Barrett, The Honors College (Contributor) / School of Sustainability (Contributor) / School of Geographical Sciences and Urban Planning (Contributor)
Created2015-05
Description
South Mountain is the largest municipal park in the nation. It is a bundled amenity, providing a series of linked services to the surrounding communities. A dataset of 19,209 homes in 155 neighborhoods within three miles of the park was utilized in order to complete a hedonic estimation for two nearby urban villages, Ahwatukee Foothills and South Mountain Village. Measures of access include proximity to the park, trailhead access, and adjacency to the park. Two regressions were estimated, the first including lot characteristics and subdivision fixed effects and the second using the coefficients for each subdivision as the dependent variable. These estimates describe how the location of a house in a subdivision contributes to its conditional mean price. As a result they offer a direct basis for capturing amenities measured at the neighborhood scale on home values. Park proximity, trailhead access and adjacency were found to significantly influence the price of homes at the 5% confidence level in Ahwatukee, but not in South Mountain Village. The results of this study can be applied to issues of environmental justice and park access in determining which areas and attributes of the park are associated with a high premium. Though South Mountain was preserved some time ago, development and future preservation in the City of Phoenix can be informed by such studies.
ContributorsRamakrishna, Saritha Kambhampati (Author) / Abbott, Joshua (Thesis director) / Smith, V. Kerry (Committee member) / Schoon, Michael (Committee member) / Barrett, The Honors College (Contributor) / School of Sustainability (Contributor) / Economics Program in CLAS (Contributor) / Department of English (Contributor)
Created2015-05
Hiking and Hegemony: Destabilizing the nature/culture and gender binaries through outdoor recreation
Description
This paper explores the contested relationships between nature, culture, and gender. In order to analyze these relationships, we look specifically at outdoor recreation. Furthermore, we employ poststructuralist feminist theory in order to produce three frameworks; the first of which is titled Mother Nature’s Promiscuous Past. Rooted in Old World and colonial values, this framework illustrates the flawed feminization of nature by masculinity, and its subsequent extortion of anything related to femininity — including women and nature itself. This belief barred women from nature, resulting in a lack of access for women to outdoor recreation.
Our second framework, titled The Pleasurable Potential of Outdoor Recreation, cites second-wave feminism as a catalyst for women’s participation in wilderness exploration and outdoor recreation. The work of radical feminists and the women’s liberation movement in 1960s and 1970s empowered women at home, in the workplace, and eventually, in the outdoors; women reclaimed their wilderness, yet they continued to employ Framework One’s feminization of nature. Ecofeminsim brought together nature and women, seeking to bring justice to two groups wronged by the same entity: masculinity. In this context, outdoor recreation is empowering for women.
Despite the potential of Framework Two to reinscribe and better the experiences of women in outdoor recreation, we argue that both Frameworks One and Two perpetuate the gender binary and the nature/culture binary, because they are based upon the notion that women are in fact fundamentally different and separate from men, the notion that nature is an entity separate from culture, or human society, as well as the notion that nature is in fact a feminine entity.
Our third framework, Deer Pay No Mind to Your Genitals, engages poststructuralism, asserting that outdoor recreation and activities that occur in nature can serve to destabilize and deconstruct notions of the gender binary. However, we argue that care must be exercised during this process as not to perpetuate the problematic nature/culture binary, a phenomenon that is unproductive in terms of both sustainability and gender liberation. Outdoor recreation has been used by many as a tool to deconstruct numerous societal constraints, including the gender binary; this, however, continues to attribute escapist and isolationist qualities toward nature, and therefore perpetuating the nature/culture divide. Ultimately, we argue outdoor recreation can and should be used as a tool deconstruct the gender binary, however needs to account for the fact that if nature is helping to construct elements of culture, then the two cannot be separate.
Our second framework, titled The Pleasurable Potential of Outdoor Recreation, cites second-wave feminism as a catalyst for women’s participation in wilderness exploration and outdoor recreation. The work of radical feminists and the women’s liberation movement in 1960s and 1970s empowered women at home, in the workplace, and eventually, in the outdoors; women reclaimed their wilderness, yet they continued to employ Framework One’s feminization of nature. Ecofeminsim brought together nature and women, seeking to bring justice to two groups wronged by the same entity: masculinity. In this context, outdoor recreation is empowering for women.
Despite the potential of Framework Two to reinscribe and better the experiences of women in outdoor recreation, we argue that both Frameworks One and Two perpetuate the gender binary and the nature/culture binary, because they are based upon the notion that women are in fact fundamentally different and separate from men, the notion that nature is an entity separate from culture, or human society, as well as the notion that nature is in fact a feminine entity.
Our third framework, Deer Pay No Mind to Your Genitals, engages poststructuralism, asserting that outdoor recreation and activities that occur in nature can serve to destabilize and deconstruct notions of the gender binary. However, we argue that care must be exercised during this process as not to perpetuate the problematic nature/culture binary, a phenomenon that is unproductive in terms of both sustainability and gender liberation. Outdoor recreation has been used by many as a tool to deconstruct numerous societal constraints, including the gender binary; this, however, continues to attribute escapist and isolationist qualities toward nature, and therefore perpetuating the nature/culture divide. Ultimately, we argue outdoor recreation can and should be used as a tool deconstruct the gender binary, however needs to account for the fact that if nature is helping to construct elements of culture, then the two cannot be separate.
ContributorsPolick-Kirkpatrick, Kaelyn (Co-author) / Downing, Haley Marie (Co-author) / Dove-Viebahn, Aviva (Thesis director) / Schoon, Michael (Committee member) / School of Sustainability (Contributor) / School of Social Transformation (Contributor) / Economics Program in CLAS (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
DescriptionA small-scale aquaponic system was created to demonstrate the sustainable properties of the system as well as the effectiveness of raising fish and plants symbiotically.
ContributorsSerna, Desiree Marie (Author) / Schoon, Michael (Thesis director) / Peterson, Greg (Committee member) / Barrett, The Honors College (Contributor) / School of Life Sciences (Contributor)
Created2014-05
Description
The following Student Sustainability Consultant's Portfolio was created with the intention of being duplicated and utilized by Arizona State University (ASU) students to build their own Portfolio and to help prepare them for success after graduation. Student Consultants in GreenLight Solutions (GLS) are in a unique position to prepare themselves to create value for organizations while in school, and then continue to after graduation. When I enrolled in the School of Sustainability as an undergraduate transfer student I heard some constructive criticism from graduates of the school. Those students shared that while they had attained a great theoretical understanding of the science of sustainability, they lacked the ability to apply their knowledge in a practical way. They were struggling with finding work in their field because they could not communicate to employers how their knowledge was useful. They did not know how to apply their sustainability knowledge to create value for an organization. I did not want to have that same problem when I graduated. Enter GreenLight Solutions.
ContributorsKeleher, Kevin Robert (Author) / Schoon, Michael (Thesis director) / Basile, George (Committee member) / Buch, Rajesh (Committee member) / Barrett, The Honors College (Contributor) / School of Sustainability (Contributor) / Department of Supply Chain Management (Contributor)
Created2013-12