Matching Items (552)
148155-Thumbnail Image.png
Description

A novel concept for integration of flame-assisted fuel cells (FFC) with a gas turbine is analyzed in this paper. Six different fuels (CH4, C3H8, JP-4, JP-5, JP-10(L), and H2) are investigated for the analytical model of the FFC integrated gas turbine hybrid system. As equivalence ratio increases, the efficiency of

A novel concept for integration of flame-assisted fuel cells (FFC) with a gas turbine is analyzed in this paper. Six different fuels (CH4, C3H8, JP-4, JP-5, JP-10(L), and H2) are investigated for the analytical model of the FFC integrated gas turbine hybrid system. As equivalence ratio increases, the efficiency of the hybrid system increases initially then decreases because the decreasing flow rate of air begins to outweigh the increasing hydrogen concentration. This occurs at an equivalence ratio of 2 for CH4. The thermodynamic cycle is analyzed using a temperature entropy diagram and a pressure volume diagram. These thermodynamic diagrams show as equivalence ratio increases, the power generated by the turbine in the hybrid setup decreases. Thermodynamic analysis was performed to verify that energy is conserved and the total chemical energy going into the system was equal to the heat rejected by the system plus the power generated by the system. Of the six fuels, the hybrid system performs best with H2 as the fuel. The electrical efficiency with H2 is predicted to be 27%, CH4 is 24%, C3H8 is 22%, JP-4 is 21%, JP-5 is 20%, and JP-10(L) is 20%. When H2 fuel is used, the overall integrated system is predicted to be 24.5% more efficient than the standard gas turbine system. The integrated system is predicted to be 23.0% more efficient with CH4, 21.9% more efficient with C3H8, 22.7% more efficient with JP-4, 21.3% more efficient with JP-5, and 20.8% more efficient with JP-10(L). The sensitivity of the model is investigated using various fuel utilizations. When CH4 fuel is used, the integrated system is predicted to be 22.7% more efficient with a fuel utilization efficiency of 90% compared to that of 30%.

ContributorsRupiper, Lauren Nicole (Author) / Milcarek, Ryan (Thesis director) / Wang, Liping (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / School for Engineering of Matter,Transport & Enrgy (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
137700-Thumbnail Image.png
Description
This thesis focuses on the erotic depictions of Lucretia and Susanna in Renaissance art. Both noted for displaying exemplary chastity, Lucretia and Susanna gained popularity as Christian and secular role models for women in the late Middle Ages and Renaissance. My examination of the heroines addresses the seductive portrayal of

This thesis focuses on the erotic depictions of Lucretia and Susanna in Renaissance art. Both noted for displaying exemplary chastity, Lucretia and Susanna gained popularity as Christian and secular role models for women in the late Middle Ages and Renaissance. My examination of the heroines addresses the seductive portrayal of these women in painting, which seemingly contradicts the essence of their celebrity. The images specifically analyzed in this thesis include: Lucas Cranach the Elder's Lucretia from 1525, Lucretia from 1533, and Venus from 1532 as well as Tintoretto's Susanna and the Elders and Annibale Carracci's Susanna and the Elders. The scope of my thesis includes both textual and visual analyses of the myths/figures and the disparity that arises between them. Employing Lucretia and Susanna as examples, my aim is to demonstrate a subtle subversion occurring within images of powerful women that ultimately strips them of their power.
ContributorsWilliamson, Jennifer Marie (Author) / Schleif, Corine (Thesis director) / Geschwind, Rachel (Committee member) / Pratt, Rebekah (Committee member) / Barrett, The Honors College (Contributor) / School of Social Transformation (Contributor) / School of Human Evolution and Social Change (Contributor) / School of Art (Contributor)
Created2013-05
137701-Thumbnail Image.png
Description
Science fiction themed video games, specifically Role Playing Games (RPGs) like Deus Ex: Human Revolution (DX:HR), that focus on an emerging technology, contain features that help to better inform anticipatory governance. In a game like DX:HR, players vicariously experience human-enhancement technology and its societal effects through their in-game character. Acting

Science fiction themed video games, specifically Role Playing Games (RPGs) like Deus Ex: Human Revolution (DX:HR), that focus on an emerging technology, contain features that help to better inform anticipatory governance. In a game like DX:HR, players vicariously experience human-enhancement technology and its societal effects through their in-game character. Acting as the character, the player explores the topic of human-enhancement technology in various ways, including dialogue with non-player characters (NPCs) and decisions that directly affect the game's world. Because Deus Ex: Human Revolution and games similar to it, allow players to explore and think about the technology itself, the stances on it, and its potential societal effects, they facilitate the anticipatory governance process. In this paper I postulate a theory of anticipatory gaming, which asserts that video games inform the anticipatory governance process for an emerging technology. To demonstrate this theory I examine the parts of the anticipatory governance process and demonstrate RPG's ability to inform it, through a case study of Deus Ex: Human Revolution.
ContributorsShedd, Jesse Bernard (Author) / Wetmore, Jameson (Thesis director) / Fisher, Erik (Committee member) / McKnight, John Carter (Committee member) / Barrett, The Honors College (Contributor) / School of Human Evolution and Social Change (Contributor)
Created2013-05
152239-Thumbnail Image.png
Description
Production from a high pressure gas well at a high production-rate encounters the risk of operating near the choking condition for a compressible flow in porous media. The unbounded gas pressure gradient near the point of choking, which is located near the wellbore, generates an effective tensile stress on the

Production from a high pressure gas well at a high production-rate encounters the risk of operating near the choking condition for a compressible flow in porous media. The unbounded gas pressure gradient near the point of choking, which is located near the wellbore, generates an effective tensile stress on the porous rock frame. This tensile stress almost always exceeds the tensile strength of the rock and it causes a tensile failure of the rock, leading to wellbore instability. In a porous rock, not all pores are choked at the same flow rate, and when just one pore is choked, the flow through the entire porous medium should be considered choked as the gas pressure gradient at the point of choking becomes singular. This thesis investigates the choking condition for compressible gas flow in a single microscopic pore. Quasi-one-dimensional analysis and axisymmetric numerical simulations of compressible gas flow in a pore scale varicose tube with a number of bumps are carried out, and the local Mach number and pressure along the tube are computed for the flow near choking condition. The effects of tube length, inlet-to-outlet pressure ratio, the number of bumps and the amplitude of the bumps on the choking condition are obtained. These critical values provide guidance for avoiding the choking condition in practice.
ContributorsYuan, Jing (Author) / Chen, Kangping (Thesis advisor) / Wang, Liping (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2013
151485-Thumbnail Image.png
Description
Tesla turbo-machinery offers a robust, easily manufactured, extremely versatile prime mover with inherent capabilities making it perhaps the best, if not the only, solution for certain niche applications. The goal of this thesis is not to optimize the performance of the Tesla turbine, but to compare its performance with various

Tesla turbo-machinery offers a robust, easily manufactured, extremely versatile prime mover with inherent capabilities making it perhaps the best, if not the only, solution for certain niche applications. The goal of this thesis is not to optimize the performance of the Tesla turbine, but to compare its performance with various working fluids. Theoretical and experimental analyses of a turbine-generator assembly utilizing compressed air, saturated steam and water as the working fluids were performed and are presented in this work. A brief background and explanation of the technology is provided along with potential applications. A theoretical thermodynamic analysis is outlined, resulting in turbine and rotor efficiencies, power outputs and Reynolds numbers calculated for the turbine for various combinations of working fluids and inlet nozzles. The results indicate the turbine is capable of achieving a turbine efficiency of 31.17 ± 3.61% and an estimated rotor efficiency 95 ± 9.32%. These efficiencies are promising considering the numerous losses still present in the current design. Calculation of the Reynolds number provided some capability to determine the flow behavior and how that behavior impacts the performance and efficiency of the Tesla turbine. It was determined that turbulence in the flow is essential to achieving high power outputs and high efficiency. Although the efficiency, after peaking, begins to slightly taper off as the flow becomes increasingly turbulent, the power output maintains a steady linear increase.
ContributorsPeshlakai, Aaron (Author) / Phelan, Patrick (Thesis advisor) / Trimble, Steve (Committee member) / Wang, Liping (Committee member) / Arizona State University (Publisher)
Created2012
148412-Thumbnail Image.png
Description

This work summarizes the development of a dynamic measurement platform in a cryostat to measure sample temperature response to space-like conditions and the creation a MATLAB theoretical model to predict sample temperature responses in the platform itself. An interesting variable-emittance sample called a Fabry-Perot emitter was studied for its thermal

This work summarizes the development of a dynamic measurement platform in a cryostat to measure sample temperature response to space-like conditions and the creation a MATLAB theoretical model to predict sample temperature responses in the platform itself. An interesting variable-emittance sample called a Fabry-Perot emitter was studied for its thermal homeostasis behavior using the two developments. Using the measurement platform, it was shown that there was no thermal homeostatic behavior demonstrated by the sample at steady state temperatures. Theoretical calculations show other ways to demonstrate the cooling homeostasis behavior through time-varying heat inputs. Factors within the system such as heat loss and thermal mass contributed to an inhibited sample performance in the platform. Future work will have to be conducted, not only to verify the findings of the initial experiments but also to improve the measurement platform and the theoretical model.

ContributorsBoman, Neal D (Author) / Wang, Liping (Thesis director) / Taylor, Syndey (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
148418-Thumbnail Image.png
Description

A thermochromic mid-infrared filter is designed, where a spectrally-selective transmittance peak exists while vanadium dioxide layers are below their transition temperature but broad opaqueness is observed below the transition temperature. This filter takes advantage of interference effects between a silicon spacer and insulating vanadium dioxide to create the transmittance peak

A thermochromic mid-infrared filter is designed, where a spectrally-selective transmittance peak exists while vanadium dioxide layers are below their transition temperature but broad opaqueness is observed below the transition temperature. This filter takes advantage of interference effects between a silicon spacer and insulating vanadium dioxide to create the transmittance peak and the drastic optical property change between insulating and metallic vanadium dioxide. The theoretical performance of the filter in energy dissipation and thermal camouflaging applications is analyzed and can be optimized by tuning the thicknesses of the thin-film layers.

ContributorsChao, Jeremy (Author) / Wang, Liping (Thesis director) / Taylor, Sydney (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
136102-Thumbnail Image.png
Description
This paper studies the change in social diversity and interaction space from the Classic to Postclassic periods in the Mimbres Valley and East Mimbres Area. Between the Classic and Postclassic periods the Mimbres region of the American Southwest exhibits an increase in diversity of ceramic wares. Previous research suggests that

This paper studies the change in social diversity and interaction space from the Classic to Postclassic periods in the Mimbres Valley and East Mimbres Area. Between the Classic and Postclassic periods the Mimbres region of the American Southwest exhibits an increase in diversity of ceramic wares. Previous research suggests that increased diversity of ceramics indicates a more diverse community, which could pose challenges to local social interaction (Nelson et al. 2011). I am interested in whether the architecture of plazas, focal points of communities' social structures, change in response to the growing social diversity. To examine this, I quantify the diversity of painted ceramics at Classic and Postclassic villages as well as the extent of the enclosure of plazas. I find that there is a definite shift towards greater plaza enclosure between the Classic and Postclassic periods. I conclude this paper with a discussion of possible interpretations of this trend regarding the social reactions of Mimbres communities to the changes which reshaped the region between the Classic and Postclassic periods.
Created2015-05
136115-Thumbnail Image.png
Description
Background: Both puberty and diets composed of high levels of saturated fats have been shown to result in central adiposity, fasting hyperinsulinemia, insulin resistance and impaired glucose tolerance. While a significantly insulinogenic phenotypic change occurs in these two incidences, glucose homeostasis does not appear to be affected. Methods: Male, Sprague-dawley

Background: Both puberty and diets composed of high levels of saturated fats have been shown to result in central adiposity, fasting hyperinsulinemia, insulin resistance and impaired glucose tolerance. While a significantly insulinogenic phenotypic change occurs in these two incidences, glucose homeostasis does not appear to be affected. Methods: Male, Sprague-dawley rats were fed diets consisting of CHOW or low fat (LF), High Fat Diet and High Fat Diet (HFD) with supplementary Canola Oil (Monounsaturated fat). These rats were given these diets at 4-5 weeks old and given intraperitoneal and oral glucose tolerance tests(IPGTT; OGTT) at 4 and 8 weeks to further understand glucose and insulin behavior under different treatments. (IPGTT: LF-n=14, HFD-n=16, HFD+CAN-n=12; OGTT: LF-n=8, HFD-n=8, HFD+CAN-n=6). Results: When comparing LF fed rats at 8 weeks with 4 week glucose challenge test, area under the curve (AUC) of glucose was 1.2 that of 4 weeks. At 8 weeks, HFD fed rats AUCg was much greater than LF fed rats under both IPGTT and OGTT. When supplemented with Canola oil, HFD fed rats AUC returned to LF data range. Despite the alleviating glucose homeostasis affects of Canola oil the AUC of insulin curve, which was elevated by HFD, remained high. Conclusion: HFD in maturing rats elevates fasting insulin levels, increases insulin resistance and lowers glucose homeostasis. When given a monounsaturated fatty acid (MUFA) supplement fasting hyperinsulinemia, and late hyperinsulinemia still occur though glucose homeostasis is regained. For OGTT HFD also induced late hyper c-peptide levels and compared to LF and HFD+CAN, a higher c-peptide level over time.
ContributorsRay, Tyler John (Author) / Caplan, Michael (Thesis director) / Herman, Richard (Committee member) / Towner, Kali (Committee member) / Barrett, The Honors College (Contributor) / Department of Chemistry and Biochemistry (Contributor) / W. P. Carey School of Business (Contributor) / School of Human Evolution and Social Change (Contributor)
Created2015-05
136558-Thumbnail Image.png
Description
This thesis looks at how feminist biography is used as a part of mainstream feminism in the United States. In particular, I look at how Sheryl Sandberg and Anne-Marie Slaughter share their experiences in the workplace in an effort to illuminate the struggles they have faced as women and to

This thesis looks at how feminist biography is used as a part of mainstream feminism in the United States. In particular, I look at how Sheryl Sandberg and Anne-Marie Slaughter share their experiences in the workplace in an effort to illuminate the struggles they have faced as women and to justify the changes they see necessary for the success of women. They base their argument for these changes on their own social assumptions about women in the private sphere and women at work. Their feminist biography may serve to help a small set of individuals, but overall the solutions they provide are applicable to only a limited demographic of women. The ultimate goal for both Sandberg and Slaughter is to achieve equality, although they base their call for change on a normative understanding of the world. In the end, I look at how a broader view of feminism that takes into account the intersection of race, class, gender, and politics can enrich popular forms of feminism in the U.S.
ContributorsSteffens, Jane Melissa (Author) / Popova, Laura (Thesis director) / Ingram-Waters, Mary (Committee member) / Barrett, The Honors College (Contributor) / School of International Letters and Cultures (Contributor) / School of Human Evolution and Social Change (Contributor)
Created2015-05