Matching Items (321)
Description
Intimate coupling of Ti2 photocatalysis and biodegradation (ICPB) offers potential for degrading biorecalcitrant and toxic organic compounds much better than possible with conventional wastewater treatments. This study reports on using a novel sponge-type, Ti2-coated biofilm carrier that shows significant adherence of Ti2 to its exterior and the ability to accumulate biomass in its interior (protected from UV light and free radicals). First, this carrier was tested for ICPB in a continuous-flow photocatalytic circulating-bed biofilm reactor (PCBBR) to mineralize biorecalcitrant organic: 2,4,5-trichlorophenol (TCP). Four mechanisms possibly acting of ICPB were tested separately: TCP adsorption, UV photolysis/photocatalysis, and biodegradation. The carrier exhibited strong TCP adsorption, while photolysis was negligible. Photocatalysis produced TCP-degradation products that could be mineralized and the strong adsorption of TCP to the carrier enhanced biodegradation by relieving toxicity. Validating the ICPB concept, biofilm was protected inside the carriers from UV light and free radicals. ICPB significantly lowered the diversity of the bacterial community, but five genera known to biodegrade chlorinated phenols were markedly enriched. Secondly, decolorization and mineralization of reactive dyes by ICPB were investigated on a refined Ti2-coated biofilm carrier in a PCBBR. Two typical reactive dyes: Reactive Black 5 (RB5) and Reactive Yellow 86 (RY86), showed similar first-order kinetics when being photocatalytically decolorized at low pH (~4-5), which was inhibited at neutral pH in the presence of phosphate or carbonate buffer, presumably due to electrostatic repulsion from negatively charged surface sites on Ti2, radical scavenging by phosphate or carbonate, or both. In the PCBBR, photocatalysis alone with Ti2-coated carriers could remove RB5 and COD by 97% and 47%, respectively. Addition of biofilm inside macroporous carriers maintained a similar RB5 removal efficiency, but COD removal increased to 65%, which is evidence of ICPB despite the low pH. A proposed ICPB pathway for RB5 suggests that a major intermediate, a naphthol derivative, was responsible for most of the residual COD. Finally, three low-temperature sintering methods, called O, D and DN, were compared based on photocatalytic efficiency and Ti2 adherence. The DN method had the best Ti2-coating properties and was a successful carrier for ICPB of RB5 in a PCBBR.
ContributorsLi, Guozheng (Author) / Rittmann, Bruce E. (Thesis advisor) / Halden, Rolf (Committee member) / Krajmalnik-Brown, Rosa (Committee member) / Arizona State University (Publisher)
Created2011
Description
As the return to normality in the wake of the COVID-19 pandemic enters its early stages, the necessity for accurate, quick, and community-wide surveillance of SARS-CoV-2 has been emphasized. Wastewater-based epidemiology (WBE) has been used across the world as a tool for monitoring the pandemic, but studies of its efficacy in comparison to the best-known method for surveillance, randomly selected COVID-19 testing, has limited research. This study evaluated the trends and correlations present between SARS-CoV-2 in the effluent wastewater of a large university campus and random COVID-19 testing results published by the university. A moderately strong positive correlation was found between the random testing and WBE surveillance methods (r = 0.63), and this correlation was strengthened when accommodating for lost samples during the experiment (r = 0.74).
ContributorsWright, Jillian (Author) / Halden, Rolf (Thesis director) / Driver, Erin (Committee member) / School of Music, Dance and Theatre (Contributor) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
An analysis of university flight emissions, carbon neutrality goals, and the global impact of university sanctioned flight.
ContributorsKoehler, Megan Anne (Author) / Halden, Rolf (Thesis director) / Driver, Erin (Committee member) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
Nitrate is the most prevalent water pollutant limiting the use of groundwater as a potable water source. The overarching goal of this dissertation was to leverage advances in nanotechnology to improve nitrate photocatalysis and transition treatment to the full-scale. The research objectives were to (1) examine commercial and synthesized photocatalysts, (2) determine the effect of water quality parameters (e.g., pH), (3) conduct responsible engineering by ensuring detection methods were in place for novel materials, and (4) develop a conceptual framework for designing nitrate-specific photocatalysts. The key issues for implementing photocatalysis for nitrate drinking water treatment were efficient nitrate removal at neutral pH and by-product selectivity toward nitrogen gases, rather than by-products that pose a human health concern (e.g., nitrite). Photocatalytic nitrate reduction was found to follow a series of proton-coupled electron transfers. The nitrate reduction rate was limited by the electron-hole recombination rate, and the addition of an electron donor (e.g., formate) was necessary to reduce the recombination rate and achieve efficient nitrate removal. Nano-sized photocatalysts with high surface areas mitigated the negative effects of competing aqueous anions. The key water quality parameter impacting by-product selectivity was pH. For pH < 4, the by-product selectivity was mostly N-gas with some NH4+, but this shifted to NO2- above pH = 4, which suggests the need for proton localization to move beyond NO2-. Co-catalysts that form a Schottky barrier, allowing for localization of electrons, were best for nitrate reduction. Silver was optimal in heterogeneous systems because of its ability to improve nitrate reduction activity and N-gas by-product selectivity, and graphene was optimal in two-electrode systems because of its ability to shuttle electrons to the working electrode. "Environmentally responsible use of nanomaterials" is to ensure that detection methods are in place for the nanomaterials tested. While methods exist for the metals and metal oxides examined, there are currently none for carbon nanotubes (CNTs) and graphene. Acknowledging that risk assessment encompasses dose-response and exposure, new analytical methods were developed for extracting and detecting CNTs and graphene in complex organic environmental (e.g., urban air) and biological matrices (e.g. rat lungs).
ContributorsDoudrick, Kyle (Author) / Westerhoff, Paul (Thesis advisor) / Halden, Rolf (Committee member) / Hristovski, Kiril (Committee member) / Arizona State University (Publisher)
Created2013
Description
Contaminants of emerging concern (CECs) present in wastewater effluent can threat its safe discharge or reuse. Additional barriers of protection can be provided using advanced or natural treatment processes. This dissertation evaluated ozonation and constructed wetlands to remove CECs from wastewater effluent. Organic CECs can be removed by hydroxyl radical formed during ozonation, however estimating the ozone demand of wastewater effluent is complicated due to the presence of reduced inorganic species. A method was developed to estimate ozone consumption only by dissolved organic compounds and predict trace organic oxidation across multiple wastewater sources. Organic and engineered nanomaterial (ENM) CEC removal in constructed wetlands was investigated using batch experiments and continuous-flow microcosms containing decaying wetland plants. CEC removal varied depending on their physico-chemical properties, hydraulic residence time (HRT) and relative quantities of plant materials in the microcosms. At comparable HRTs, ENM removal improved with higher quantity of plant materials due to enhanced sorption which was verified in batch-scale studies with plant materials. A fate-predictive model was developed to evaluate the role of design loading rates on organic CEC removal. Areal removal rates increased with hydraulic loading rates (HLRs) and carbon loading rates (CLRs) unless photolysis was the dominant removal mechanism (e.g. atrazine). To optimize CEC removal, wetlands with different CLRs can be used in combination without lowering the net HLR. Organic CEC removal in denitrifying conditions of constructed wetlands was investigated and selected CECs (e.g. estradiol) were found to biotransform while denitrification occurred. Although level of denitrification was affected by HRT, similar impact on estradiol was not observed due to a dominant effect from plant biomass quantity. Overall, both modeling and experimental findings suggest considering CLR as an equally important factor with HRT or HLR to design constructed wetlands for CEC removal. This dissertation provided directions to select design parameters for ozonation (ozone dose) and constructed wetlands (design loading rates) to meet organic CEC removal goals. Future research is needed to understand fate of ENMs during ozonation and quantify the contributions from different transformation mechanisms occurring in the wetlands to incorporate in a model and evaluate the effect of wetland design.
ContributorsSharif, Fariya (Author) / Westerhoff, Paul (Thesis advisor) / Halden, Rolf (Committee member) / Fox, Peter (Committee member) / Herckes, Pierre (Committee member) / Arizona State University (Publisher)
Created2013
Description
The overall goal of this dissertation is to advance understanding of biofilm reduction of oxidized contaminants in water and wastewater. Chapter 1 introduces the fundamentals of biological reduction of three oxidized contaminants (nitrate, perchlorate, and trichloriethene (TCE)) using two biofilm processes (hydrogen-based membrane biofilm reactors (MBfR) and packed-bed heterotrophic reactors (PBHR)), and it identifies the research objectives. Chapters 2 through 6 focus on nitrate removal using the MBfR and PBHR, while chapters 7 through 10 investigate simultaneous reduction of nitrate and another oxidized compound (perchlorate, sulfate, or TCE) in the MBfR. Chapter 11 summarizes the major findings of this research. Chapters 2 and 3 demonstrate nitrate removal in a groundwater and identify the maximum nitrate loadings using a pilot-scale MBfR and a pilot-scale PBHR, respectively. Chapter 4 compares the MBfR and the PBHR for denitrification of the same nitrate-contaminated groundwater. The comparison includes the maximum nitrate loading, the effluent water quality of the denitrification reactors, and the impact of post-treatment on water quality. Chapter 5 theoretically and experimentally demonstrates that the nitrate biomass-carrier surface loading, rather than the traditionally used empty bed contact time or nitrate volumetric loading, is the primary design parameter for heterotrophic denitrification. Chapter 6 constructs a pH-control model to predict pH, alkalinity, and precipitation potential in heterotrophic or hydrogen-based autotrophic denitrification reactors. Chapter 7 develops and uses steady-state permeation tests and a mathematical model to determine the hydrogen-permeation coefficients of three fibers commonly used in the MBfR. The coefficients are then used as inputs for the three models in Chapters 8-10. Chapter 8 develops a multispecies biofilm model for simultaneous reduction of nitrate and perchlorate in the MBfR. The model quantitatively and systematically explains how operating conditions affect nitrate and perchlorate reduction and biomass distribution via four mechanisms. Chapter 9 modifies the nitrate and perchlorate model into a nitrate and sulfate model and uses it to identify operating conditions corresponding to onset of sulfate reduction. Chapter 10 modifies the nitrate and perchlorate model into a nitrate and TCE model and uses it to investigate how operating conditions affect TCE reduction and accumulation of TCE reduction intermediates.
ContributorsTang, Youneng (Author) / Rittmann, Bruce E. (Thesis advisor) / Westerhoff, Paul (Committee member) / Krajmalnik-Brown, Rosa (Committee member) / Halden, Rolf (Committee member) / Arizona State University (Publisher)
Created2012
Description
Some of the most talented, innovative, and experimental artists are students, but they are often discouraged by the price of higher education and lack of scholarship or funding opportunities. Additionally, the art industry has become stagnant. Traditional brick-and-mortar galleries are not willing to represent young, unknown artists. Their overhead is simply too high for risky choices.
The Student Art Project is art patronage for the 21st century—a curated online gallery featuring exceptional student artists. The Student Art Project is a highly curated experience for buyers. Only five artists are featured each month. Buyers are not bombarded with thousands of different products and separate artists “shops”. They can read artists bios and find art they connect with.
Student artists apply through an online form. Once accepted to the program, artists receive a $200 materials stipend to create an exclusive collection of 5-10 pieces. Original artwork and limited edition prints are sold through our website. These collections can potentially fund an entire year of college tuition, a life-changing amount for many students.
Brick-and-mortar galleries typically take 40-60% of the retail price of artwork. The Student Art Project will only take 30%, which we will use to reinvest in future artists. Other art websites, like Etsy, require the artists to ship, invoice, and communicate with customers. For students, this means less time spent in the classroom and less time developing their craft. The Student Art Project handles all business functions for our artists, allowing them to concentrate on what really matters, their education.
The Student Art Project is art patronage for the 21st century—a curated online gallery featuring exceptional student artists. The Student Art Project is a highly curated experience for buyers. Only five artists are featured each month. Buyers are not bombarded with thousands of different products and separate artists “shops”. They can read artists bios and find art they connect with.
Student artists apply through an online form. Once accepted to the program, artists receive a $200 materials stipend to create an exclusive collection of 5-10 pieces. Original artwork and limited edition prints are sold through our website. These collections can potentially fund an entire year of college tuition, a life-changing amount for many students.
Brick-and-mortar galleries typically take 40-60% of the retail price of artwork. The Student Art Project will only take 30%, which we will use to reinvest in future artists. Other art websites, like Etsy, require the artists to ship, invoice, and communicate with customers. For students, this means less time spent in the classroom and less time developing their craft. The Student Art Project handles all business functions for our artists, allowing them to concentrate on what really matters, their education.
ContributorsDangler, Rebecca Leigh (Author) / Trujillo, Rhett (Thesis director) / Coleman, Sean (Committee member) / Barrett, The Honors College (Contributor) / Herberger Institute for Design and the Arts (Contributor) / Department of Management (Contributor)
Created2015-05
Description
Drought is one of the most pressing issues affecting the future of the standard of living here in Phoenix. With the threat of water rationing and steep price hikes looming on the horizon for water customers in California, the desert southwest, and in drought-stricken communities worldwide, industrial designers are in a prime position to help improve the experience of water conservation so that consumers are willing to start taking conscious steps toward rethinking their relationship with water usage.
In a research group, several designers sought to understand the depth and complexity of this highly politicized issue by interviewing a wide variety of stakeholders, including sustainability experts, landscapers, water company executives, small business owners, reservoir forest rangers, and many more. Data synthesis led to the conclusion that residential water use is a lifestyle issue, and the only real way to conserve involves a significant shift in the collective idea of an “ideal” home—lawns, pools, and overwatered landscaping contribute to 70% of all water use by residences in the Phoenix area. The only real way to conserve involves increasing population density and creating communal green spaces.
DR. DISH is a dishwashing device that is meant to fit into the high-density living spaces that are rapidly being built in the face of the massive exodus of people into the world’s cities. To help busy apartment and condominium dwellers conserve water and time, DR. DISH converts a standard kitchen sink into a small dishwasher, which uses significantly less water than hand-washing dishes or rinsing dishes before putting them into a conventional dishwasher. Using advanced filtration technology and a powerful rinse cycle, a load dishes can be cleaned with about 2 gallons of water. Fully automating the dishwashing process also saves the user time and minimizes unpleasant contact with food residue and grease.
This device is meant to have a significant impact upon the water use of households that do not have a dishwasher, or simply do not use their dishwasher. With a low target price point and myriad convenient features, DR. DISH is a high-tech solution that promises water savings at a time when every effort toward conservation is absolutely critical. As we move toward a new era in determining water rights and imposing mandatory restrictions upon each and every person living in affected areas, creating conservation solutions that will be relevant for the lifestyles of the future is especially important, and the agility of designers in coming up with products that quickly cut consumer water consumption will be a key factor in determining whether humanity will be able to adapt to a new era in our relationship with natural resources.
In a research group, several designers sought to understand the depth and complexity of this highly politicized issue by interviewing a wide variety of stakeholders, including sustainability experts, landscapers, water company executives, small business owners, reservoir forest rangers, and many more. Data synthesis led to the conclusion that residential water use is a lifestyle issue, and the only real way to conserve involves a significant shift in the collective idea of an “ideal” home—lawns, pools, and overwatered landscaping contribute to 70% of all water use by residences in the Phoenix area. The only real way to conserve involves increasing population density and creating communal green spaces.
DR. DISH is a dishwashing device that is meant to fit into the high-density living spaces that are rapidly being built in the face of the massive exodus of people into the world’s cities. To help busy apartment and condominium dwellers conserve water and time, DR. DISH converts a standard kitchen sink into a small dishwasher, which uses significantly less water than hand-washing dishes or rinsing dishes before putting them into a conventional dishwasher. Using advanced filtration technology and a powerful rinse cycle, a load dishes can be cleaned with about 2 gallons of water. Fully automating the dishwashing process also saves the user time and minimizes unpleasant contact with food residue and grease.
This device is meant to have a significant impact upon the water use of households that do not have a dishwasher, or simply do not use their dishwasher. With a low target price point and myriad convenient features, DR. DISH is a high-tech solution that promises water savings at a time when every effort toward conservation is absolutely critical. As we move toward a new era in determining water rights and imposing mandatory restrictions upon each and every person living in affected areas, creating conservation solutions that will be relevant for the lifestyles of the future is especially important, and the agility of designers in coming up with products that quickly cut consumer water consumption will be a key factor in determining whether humanity will be able to adapt to a new era in our relationship with natural resources.
ContributorsMarcinkowski, Margaret Nicole (Author) / Shin, Dosun (Thesis director) / McDermott, Lauren (Committee member) / Barrett, The Honors College (Contributor) / The Design School (Contributor) / Herberger Institute for Design and the Arts (Contributor)
Created2015-05
Description
Fire Shelter Foam Assist is meant as a firefighter's last effort of survival when a wildfire threatens their position. When deployed, it will cover the firefighter as the fire blows over. By reducing the time of deployment and simplifying the process, firefighters will have more time to ensure the area around them is cleared. The Fire Shelter Foam Assist has features that allow it to auto deploy around the firefighter through the use of fire foam retardant. The fire foam retardant inflates the shelter as well as provides an extra layer of protection against the wildfire.
ContributorsSmith, Tori Elizabeth (Author) / Shin, Dosun (Thesis director) / McDermott, Lauren (Committee member) / Barrett, The Honors College (Contributor) / Herberger Institute for Design and the Arts (Contributor) / The Design School (Contributor)
Created2015-05
Description
After researching pediatric cancer experiences, an opportunity emerged creating a less intimidating environment for children undergoing chemotherapy. By means of adding a creative component to their IV pole and disguising machinery, children will be a part of an Imagination Voyage adventure. Creative themes allow for a journey on a pirate ship, or being in a fantasy castle by captivating children in playtime. The design allows for a frightening experience to become a positive one.
ContributorsHerold, Brittany Ann (Author) / Shin, Dosun (Thesis director) / McDermott, Lauren (Committee member) / Barrett, The Honors College (Contributor) / Herberger Institute for Design and the Arts (Contributor) / School of Sustainability (Contributor) / The Design School (Contributor)
Created2015-05