Matching Items (105)
Description
Filtration for microfluidic sample-collection devices is desirable for sample selection, concentration, preprocessing, and downstream manipulation, but microfabricating the required sub-micrometer filtration structure is an elaborate process. This thesis presents a simple method to fabricate polydimethylsiloxane (PDMS) devices with an integrated membrane filter that will sample, lyse, and extract the DNA from microorganisms in aqueous environments. An off-the-shelf membrane filter disc was embedded in a PDMS layer and sequentially bound with other PDMS channel layers. No leakage was observed during filtration. This device was validated by concentrating a large amount of cyanobacterium Synechocystis in simulated sample water with consistent performance across devices. After accumulating sufficient biomass on the filter, a sequential electrochemical lysing process was performed by applying 5VDC across the filter. This device was further evaluated by delivering several samples of differing concentrations of cyanobacterium Synechocystis then quantifying the DNA using real-time PCR. Lastly, an environmental sample was run through the device and the amount of photosynthetic microorganisms present in the water was determined. The major breakthroughs in this design are low energy demand, cheap materials, simple design, straightforward fabrication, and robust performance, together enabling wide-utility of similar chip-based devices for field-deployable operations in environmental micro-biotechnology.
ContributorsLecluse, Aurelie (Author) / Meldrum, Deirdre (Thesis advisor) / Chao, Joseph (Thesis advisor) / Westerhoff, Paul (Committee member) / Arizona State University (Publisher)
Created2011
Description
Single cell phenotypic heterogeneity studies reveal more information about the pathogenesis process than conventional bulk methods. Furthermore, investigation of the individual cellular response mechanism during rapid environmental changes can only be achieved at single cell level. By enabling the study of cellular morphology, a single cell three-dimensional (3D) imaging system can be used to diagnose fatal diseases, such as cancer, at an early stage. One proven method, CellCT, accomplishes 3D imaging by rotating a single cell around a fixed axis. However, some existing cell rotating mechanisms require either intricate microfabrication, and some fail to provide a suitable environment for living cells. This thesis develops a microvorterx chamber that allows living cells to be rotated by hydrodynamic alone while facilitating imaging access. In this thesis work, 1) the new chamber design was developed through numerical simulation. Simulations revealed that in order to form a microvortex in the side chamber, the ratio of the chamber opening to the channel width must be smaller than one. After comparing different chamber designs, the trapezoidal side chamber was selected because it demonstrated controllable circulation and met the imaging requirements. Microvortex properties were not sensitive to the chambers with interface angles ranging from 0.32 to 0.64. A similar trend was observed when chamber heights were larger than chamber opening. 2) Micro-particle image velocimetry was used to characterize microvortices and validate simulation results. Agreement between experimentation and simulation confirmed that numerical simulation was an effective method for chamber design. 3) Finally, cell rotation experiments were performed in the trapezoidal side chamber. The experimental results demonstrated cell rotational rates ranging from 12 to 29 rpm for regular cells. With a volumetric flow rate of 0.5 µL/s, an irregular cell rotated at a mean rate of 97 ± 3 rpm. Rotational rates can be changed by altering inlet flow rates.
ContributorsZhang, Wenjie (Author) / Frakes, David (Thesis advisor) / Meldrum, Deirdre (Thesis advisor) / Chao, Shih-hui (Committee member) / Wang, Xiao (Committee member) / Arizona State University (Publisher)
Created2011
Description
Laboratory automation systems have seen a lot of technological advances in recent times. As a result, the software that is written for them are becoming increasingly sophisticated. Existing software architectures and standards are targeted to a wider domain of software development and need to be customized in order to use them for developing software for laboratory automation systems. This thesis proposes an architecture that is based on existing software architectural paradigms and is specifically tailored to developing software for a laboratory automation system. The architecture is based on fairly autonomous software components that can be distributed across multiple computers. The components in the architecture make use of asynchronous communication methodologies that are facilitated by passing messages between one another. The architecture can be used to develop software that is distributed, responsive and thread-safe. The thesis also proposes a framework that has been developed to implement the ideas proposed by the architecture. The framework is used to develop software that is scalable, distributed, responsive and thread-safe. The framework currently has components to control very commonly used laboratory automation devices such as mechanical stages, cameras, and also to do common laboratory automation functionalities such as imaging.
ContributorsKuppuswamy, Venkataramanan (Author) / Meldrum, Deirdre (Thesis advisor) / Collofello, James (Thesis advisor) / Sarjoughian, Hessam S. (Committee member) / Johnson, Roger (Committee member) / Arizona State University (Publisher)
Created2012
Description
Single cell analysis has become increasingly important in understanding disease onset, progression, treatment and prognosis, especially when applied to cancer where cellular responses are highly heterogeneous. Through the advent of single cell computerized tomography (Cell-CT), researchers and clinicians now have the ability to obtain high resolution three-dimensional (3D) reconstructions of single cells. Yet to date, no live-cell compatible version of the technology exists. In this thesis, a microfluidic chip with the ability to rotate live single cells in hydrodynamic microvortices about an axis parallel to the optical focal plane has been demonstrated. The chip utilizes a novel 3D microchamber design arranged beneath a main channel creating flow detachment into the chamber, producing recirculating flow conditions. Single cells are flowed through the main channel, held in the center of the microvortex by an optical trap, and rotated by the forces induced by the recirculating fluid flow. Computational fluid dynamics (CFD) was employed to optimize the geometry of the microchamber. Two methods for the fabrication of the 3D microchamber were devised: anisotropic etching of silicon and backside diffuser photolithography (BDPL). First, the optimization of the silicon etching conditions was demonstrated through design of experiment (DOE). In addition, a non-conventional method of soft-lithography was demonstrated which incorporates the use of two positive molds, one of the main channel and the other of the microchambers, compressed together during replication to produce a single ultra-thin (<200 µm) negative used for device assembly. Second, methods for using thick negative photoresists such as SU-8 with BDPL have been developed which include a new simple and effective method for promoting the adhesion of SU-8 to glass. An assembly method that bonds two individual ultra-thin (<100 µm) replications of the channel and the microfeatures has also been demonstrated. Finally, a pressure driven pumping system with nanoliter per minute flow rate regulation, sub-second response times, and < 3% flow variability has been designed and characterized. The fabrication and assembly of this device is inexpensive and utilizes simple variants of conventional microfluidic fabrication techniques, making it easily accessible to the single cell analysis community.
ContributorsMyers, Jakrey R (Author) / Meldrum, Deirdre (Thesis advisor) / Johnson, Roger (Committee member) / Frakes, David (Committee member) / Arizona State University (Publisher)
Created2012
Description
Some of the most talented, innovative, and experimental artists are students, but they are often discouraged by the price of higher education and lack of scholarship or funding opportunities. Additionally, the art industry has become stagnant. Traditional brick-and-mortar galleries are not willing to represent young, unknown artists. Their overhead is simply too high for risky choices.
The Student Art Project is art patronage for the 21st century—a curated online gallery featuring exceptional student artists. The Student Art Project is a highly curated experience for buyers. Only five artists are featured each month. Buyers are not bombarded with thousands of different products and separate artists “shops”. They can read artists bios and find art they connect with.
Student artists apply through an online form. Once accepted to the program, artists receive a $200 materials stipend to create an exclusive collection of 5-10 pieces. Original artwork and limited edition prints are sold through our website. These collections can potentially fund an entire year of college tuition, a life-changing amount for many students.
Brick-and-mortar galleries typically take 40-60% of the retail price of artwork. The Student Art Project will only take 30%, which we will use to reinvest in future artists. Other art websites, like Etsy, require the artists to ship, invoice, and communicate with customers. For students, this means less time spent in the classroom and less time developing their craft. The Student Art Project handles all business functions for our artists, allowing them to concentrate on what really matters, their education.
The Student Art Project is art patronage for the 21st century—a curated online gallery featuring exceptional student artists. The Student Art Project is a highly curated experience for buyers. Only five artists are featured each month. Buyers are not bombarded with thousands of different products and separate artists “shops”. They can read artists bios and find art they connect with.
Student artists apply through an online form. Once accepted to the program, artists receive a $200 materials stipend to create an exclusive collection of 5-10 pieces. Original artwork and limited edition prints are sold through our website. These collections can potentially fund an entire year of college tuition, a life-changing amount for many students.
Brick-and-mortar galleries typically take 40-60% of the retail price of artwork. The Student Art Project will only take 30%, which we will use to reinvest in future artists. Other art websites, like Etsy, require the artists to ship, invoice, and communicate with customers. For students, this means less time spent in the classroom and less time developing their craft. The Student Art Project handles all business functions for our artists, allowing them to concentrate on what really matters, their education.
ContributorsDangler, Rebecca Leigh (Author) / Trujillo, Rhett (Thesis director) / Coleman, Sean (Committee member) / Barrett, The Honors College (Contributor) / Herberger Institute for Design and the Arts (Contributor) / Department of Management (Contributor)
Created2015-05
Description
Drought is one of the most pressing issues affecting the future of the standard of living here in Phoenix. With the threat of water rationing and steep price hikes looming on the horizon for water customers in California, the desert southwest, and in drought-stricken communities worldwide, industrial designers are in a prime position to help improve the experience of water conservation so that consumers are willing to start taking conscious steps toward rethinking their relationship with water usage.
In a research group, several designers sought to understand the depth and complexity of this highly politicized issue by interviewing a wide variety of stakeholders, including sustainability experts, landscapers, water company executives, small business owners, reservoir forest rangers, and many more. Data synthesis led to the conclusion that residential water use is a lifestyle issue, and the only real way to conserve involves a significant shift in the collective idea of an “ideal” home—lawns, pools, and overwatered landscaping contribute to 70% of all water use by residences in the Phoenix area. The only real way to conserve involves increasing population density and creating communal green spaces.
DR. DISH is a dishwashing device that is meant to fit into the high-density living spaces that are rapidly being built in the face of the massive exodus of people into the world’s cities. To help busy apartment and condominium dwellers conserve water and time, DR. DISH converts a standard kitchen sink into a small dishwasher, which uses significantly less water than hand-washing dishes or rinsing dishes before putting them into a conventional dishwasher. Using advanced filtration technology and a powerful rinse cycle, a load dishes can be cleaned with about 2 gallons of water. Fully automating the dishwashing process also saves the user time and minimizes unpleasant contact with food residue and grease.
This device is meant to have a significant impact upon the water use of households that do not have a dishwasher, or simply do not use their dishwasher. With a low target price point and myriad convenient features, DR. DISH is a high-tech solution that promises water savings at a time when every effort toward conservation is absolutely critical. As we move toward a new era in determining water rights and imposing mandatory restrictions upon each and every person living in affected areas, creating conservation solutions that will be relevant for the lifestyles of the future is especially important, and the agility of designers in coming up with products that quickly cut consumer water consumption will be a key factor in determining whether humanity will be able to adapt to a new era in our relationship with natural resources.
In a research group, several designers sought to understand the depth and complexity of this highly politicized issue by interviewing a wide variety of stakeholders, including sustainability experts, landscapers, water company executives, small business owners, reservoir forest rangers, and many more. Data synthesis led to the conclusion that residential water use is a lifestyle issue, and the only real way to conserve involves a significant shift in the collective idea of an “ideal” home—lawns, pools, and overwatered landscaping contribute to 70% of all water use by residences in the Phoenix area. The only real way to conserve involves increasing population density and creating communal green spaces.
DR. DISH is a dishwashing device that is meant to fit into the high-density living spaces that are rapidly being built in the face of the massive exodus of people into the world’s cities. To help busy apartment and condominium dwellers conserve water and time, DR. DISH converts a standard kitchen sink into a small dishwasher, which uses significantly less water than hand-washing dishes or rinsing dishes before putting them into a conventional dishwasher. Using advanced filtration technology and a powerful rinse cycle, a load dishes can be cleaned with about 2 gallons of water. Fully automating the dishwashing process also saves the user time and minimizes unpleasant contact with food residue and grease.
This device is meant to have a significant impact upon the water use of households that do not have a dishwasher, or simply do not use their dishwasher. With a low target price point and myriad convenient features, DR. DISH is a high-tech solution that promises water savings at a time when every effort toward conservation is absolutely critical. As we move toward a new era in determining water rights and imposing mandatory restrictions upon each and every person living in affected areas, creating conservation solutions that will be relevant for the lifestyles of the future is especially important, and the agility of designers in coming up with products that quickly cut consumer water consumption will be a key factor in determining whether humanity will be able to adapt to a new era in our relationship with natural resources.
ContributorsMarcinkowski, Margaret Nicole (Author) / Shin, Dosun (Thesis director) / McDermott, Lauren (Committee member) / Barrett, The Honors College (Contributor) / The Design School (Contributor) / Herberger Institute for Design and the Arts (Contributor)
Created2015-05
Description
Fire Shelter Foam Assist is meant as a firefighter's last effort of survival when a wildfire threatens their position. When deployed, it will cover the firefighter as the fire blows over. By reducing the time of deployment and simplifying the process, firefighters will have more time to ensure the area around them is cleared. The Fire Shelter Foam Assist has features that allow it to auto deploy around the firefighter through the use of fire foam retardant. The fire foam retardant inflates the shelter as well as provides an extra layer of protection against the wildfire.
ContributorsSmith, Tori Elizabeth (Author) / Shin, Dosun (Thesis director) / McDermott, Lauren (Committee member) / Barrett, The Honors College (Contributor) / Herberger Institute for Design and the Arts (Contributor) / The Design School (Contributor)
Created2015-05
Description
After researching pediatric cancer experiences, an opportunity emerged creating a less intimidating environment for children undergoing chemotherapy. By means of adding a creative component to their IV pole and disguising machinery, children will be a part of an Imagination Voyage adventure. Creative themes allow for a journey on a pirate ship, or being in a fantasy castle by captivating children in playtime. The design allows for a frightening experience to become a positive one.
ContributorsHerold, Brittany Ann (Author) / Shin, Dosun (Thesis director) / McDermott, Lauren (Committee member) / Barrett, The Honors College (Contributor) / Herberger Institute for Design and the Arts (Contributor) / School of Sustainability (Contributor) / The Design School (Contributor)
Created2015-05
Description
I set out to better understand the issues, perceptions & solutions surrounding drought. The question that compelled my project was "What might be all the ways that we can improve the experience of conserving, reusing & educating on the topic of water." Through the process of design research I developed a system of products that improves the user experiences surrounding water. The result is IOW, an intelligent 3-product system that aims to make your water needs & wants smarter & less wasteful.
ContributorsShappee, Christian Kyle (Author) / Shin, Dosun (Thesis director) / McDermott, Lauren (Committee member) / Barrett, The Honors College (Contributor) / Herberger Institute for Design and the Arts (Contributor) / School of Sustainability (Contributor) / The Design School (Contributor)
Created2015-05
Description
The fashion industry dubs couture as high fashion, yet couture never reaches the finish line when it comes to comfort. Most of the brand name high heels on the market are too painful to wear for long periods of time. For this project, I have developed 3D printed high heels with detachable insoles that will relieve tired feet based on the principle of reflexology. The product integrates traditional flexible insoles with Arduino computing and the result is a functional surface that can ease the pain of the wearer. This paper introduces the product and with it, under-explored opportunities to customize your own high heels at home. Essentially, each consumer will have the ability to personalize and switch out their style without sacrificing comfort. Soon, a consumer will be a designer.
ContributorsNguyen, Nhi N. (Author) / Ingalls, Todd (Thesis director) / Gigantino, Josh (Committee member) / Barrett, The Honors College (Contributor) / Herberger Institute for Design and the Arts (Contributor) / School of Arts, Media and Engineering (Contributor)
Created2015-05