Matching Items (39)
Description
This paper features analysis of interdisciplinary collaboration, based on the results from the Kolbe A™ Index of students in the Nano Ethics at Play (NEAP) class, a four week course in Spring 2015. The Kolbe A™ is a system which describes the Conative Strengths of each student, or their natural drive and instinct. NEAP utilized the LEGO® SERIOUS PLAY® (LSP) method, which uses abstract LEGO models to describe answers to a proposed question in school or work environments. The models could be described piece by piece to provide clear explanations without allowing disciplinary jargon, which is why the class contained students from eleven different majors (Engineering (Civil, Biomedical, & Electrical), Business (Marketing & Supply Chain Management), Architectural Studies, Sustainability, Anthropology, Communications, Philosophy, & Psychology).
The proposed hypotheses was based on the four different Kolbe A™ strengths, or Action Modes: Fact Finder, Follow Through, Quick Start, and Implementor. Hypotheses were made about class participation and official class twitter use, using #ASUsp, for each Kolbe type. The results proved these hypotheses incorrect, indicating a lack of correlation between Kolbe A™ types and playing. The report also includes qualitative results such as Twitter Keywords and a Sentiment calculation for each week of the course. The class had many positive outcomes, including growth in the ability to collaborate by students, further understanding of how to integrate Twitter use into the classroom, and more knowledge about the effectiveness of LSP.
The proposed hypotheses was based on the four different Kolbe A™ strengths, or Action Modes: Fact Finder, Follow Through, Quick Start, and Implementor. Hypotheses were made about class participation and official class twitter use, using #ASUsp, for each Kolbe type. The results proved these hypotheses incorrect, indicating a lack of correlation between Kolbe A™ types and playing. The report also includes qualitative results such as Twitter Keywords and a Sentiment calculation for each week of the course. The class had many positive outcomes, including growth in the ability to collaborate by students, further understanding of how to integrate Twitter use into the classroom, and more knowledge about the effectiveness of LSP.
ContributorsStevens, Jenna Marie (Author) / Seager, Thomas (Thesis director) / Jenses, Camilla (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Herberger Institute for Design and the Arts (Contributor) / Barrett, The Honors College (Contributor)
Created2015-12
Description
One of the salient challenges of sustainability is the Tragedy of the Commons, where individuals acting independently and rationally deplete a common resource despite their understanding that it is not in the group's long term best interest to do so. Hardin presents this dilemma as nearly intractable and solvable only by drastic, government-mandated social reforms, while Ostrom's empirical work demonstrates that community-scale collaboration can circumvent tragedy without any elaborate outside intervention. Though more optimistic, Ostrom's work provides scant insight into larger-scale dilemmas such as climate change. Consequently, it remains unclear if the sustainable management of global resources is possible without significant government mediation. To investigate, we conducted two game theoretic experiments that challenged students in different countries to collaborate digitally and manage a hypothetical common resource. One experiment involved students attending Arizona State University and the Rochester Institute of Technology in the US and Mountains of the Moon University in Uganda, while the other included students at Arizona State and the Management Development Institute in India. In both experiments, students were randomly assigned to one of three production roles: Luxury, Intermediate, and Subsistence. Students then made individual decisions about how many units of goods they wished to produce up to a set maximum per production class. Luxury players gain the most profit (i.e. grade points) per unit produced, but they also emit the most externalities, or social costs, which directly subtract from the profit of everybody else in the game; Intermediate players produce a medium amount of profit and externalities per unit, and Subsistence players produce a low amount of profit and externalities per unit. Variables influencing and/or inhibiting collaboration were studied using pre- and post-game surveys. This research sought to answer three questions: 1) Are international groups capable of self-organizing in a way that promotes sustainable resource management?, 2) What are the key factors that inhibit or foster collective action among international groups?, and 3) How well do Hardin's theories and Ostrom's empirical models predict the observed behavior of students in the game? The results of gameplay suggest that international cooperation is possible, though likely sub-optimal. Statistical analysis of survey data revealed that heterogeneity and levels of trust significantly influenced game behavior. Specific traits of heterogeneity among students found to be significant were income, education, assigned production role, number of people in one's household, college class, college major, and military service. Additionally, it was found that Ostrom's collective action framework was a better predictor of game outcome than Hardin's theories. Overall, this research lends credence to the plausibility of international cooperation in tragedy of the commons scenarios such as climate change, though much work remains to be done.
ContributorsStanton, Albert Grayson (Author) / Clark, Susan Spierre (Thesis director) / Seager, Thomas (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2014-12
Description
While public transit systems are perceived to produce lower GHG emission intensities per passenger miles traveled (PMT) and per vehicle miles traveled (VMT), there is a limited understanding of emissions per PMT/VMT across cities, or of how emissions may change across modes (light, metro, commuter, and bus) and time (e.g., with changing electricity mixes in the future). In order to better understand the GHG emissions intensity of public transit systems, a comparative emissions assessment was developed utilizing the National Transit Database (NTD) which reports energy use from 1997 to 2012 of rail and bus systems across the US. By determining the GHG emission intensities (per VMT or per PMT) for each mode of transit across multiple years, the modes of transit can be better compared between one another. This comparison can help inform future goals to reduce GHG emissions as well as target reductions from the mode of transit that has the highest emissions. The proposed analysis of the NTD and comparison of modal emission intensities will be used to develop future forecasting that can guide public transit systems towards a sustainable future.
ContributorsCano, Alex (Author) / Chester, Mikhail (Thesis director) / Seager, Thomas (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor) / School of Sustainability (Contributor) / School of Human Evolution and Social Change (Contributor)
Created2014-12
Description
Life cycle assessment (LCA) is increasingly identified as the proper tool/framework for performing cradle to grave analysis of a product, technology, or supply chain. LCA proceeds by comparing the materials and energy needed for materials extraction, benefaction, and end-of-life management, in addition to the actual lifetime of the product. This type of analysis is commonly used to evaluate forms of renewable energy to ensure that we don't harm the environment in the name of saving it. For instance, LCA for photovoltaic (PV) technologies can be used to evaluate the environmental impacts. CdTe thin film solar cells rely on cadmium and tellurium metals which are produced as by-products in the refining of zinc and copper ore, respectively. In order to understand the environmental burdens of tellurium, it is useful to explore the extraction and refining process of copper. Copper can be refined using either a hydrometallurgical or pyrometallurgical process. I conducted a comparison of these two methods to determine the environmental impacts, the chemical reactions which take place, the energy requirements, and the extraction costs of each. I then looked into the extraction of tellurium from anode slime produced in the pyrometallurgical process and determined the energy requirements. I connected this to the production of CdTe and the power produced from a CdTe module, and analyzed the production cost of CdTe modules under increasing tellurium prices. It was concluded that tellurium production will be limited by increasing hydrometallurgical extraction of copper. Additionally, tellurium scarcity will not provide a physical constraint to CdTe commercial expansion; however it could affect the price reduction goals.
ContributorsMacIsaac, Kirsten Breanne (Author) / Seager, Thomas (Thesis director) / Fraser, Matthew (Committee member) / Wender, Ben (Committee member) / Barrett, The Honors College (Contributor) / Chemical Engineering Program (Contributor)
Created2013-05
Description
Team dynamics: a system of behaviors and psychological processes occurring within a social group (wiki). This definition classifies it as pertaining to a social group, so how do team dynamics vary from one specific social group to another? Social groups are created for many different reasons, some inherent (such as families) and some created intentionally with knowledge of what is being done (such as athletic teams, class project groups, and groups in the workforce). The way these groups interact and work as a team shapes how efficient they can work and how well they are able to achieve set goals. Therefore, in order to predict how well a particular group or team might perform in a routine project, it is useful to analyze the way they work together on a regular basis. Certain aspects of different groups, such as gender, age, level of competition, and type of activity, cause them to work together in different manners. Do any of these factors cause a particular group to work better as a team? Or do they just cause them to work differently?
ContributorsDunn, Travis Griffin (Author) / Lawrence, Christopher (Thesis director) / Seager, Thomas (Committee member) / Weaver, Edwin (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2013-05
Description
The main objective of this project was to continue research and development of a building integrated solar thermoelectric generator (BISTEG). BISTEG is a promising renewable energy technology that is capable of generating electrical energy from the heat of concentrated sunlight. In order to perform R&D, the performance of different TEG cells and TEG setups were tested and analyzed, proof-of-concepts and prototypes were built. and the performance of the proof-of-concepts and prototypes were tested and analyzed as well. In order to test different TEG cells and TEG setups, a TEG testing apparatus was designed and fabricated. The apparatus is capable of comparing the performance of TEGs with temperature differentials up to 200 degrees C. Along with a TEG testing apparatus, several proof-of-concepts and prototypes were completed. All of these were tested in order to determine the feasibility of the design. All three proof-of-concepts were only capable of producing a voltage output less than 300mV. The prototype, however, was capable of producing a max output voltage of 17 volts. Although the prototype outperformed all of the proof-of-concepts, optimizations to the design can continue to improve the output voltage. In order to do so, stacked TEG tests were performed. After performing the stacked TEG tests, it was determined that the use of stacked TEGs depended on the Fresnel lens chosen. If BISTEG were to use a point focused Fresnel lens, using a stack of TEGs could increase the power density. If BISTEG were to utilize a linear focused Fresnel lens, however, the TEGs should not be stacked. It would be more efficient to lay them out side by side. They can be stacked, however, if the energy density needs to be increased and the costs of the additional TEGs are not an issue.
ContributorsPark, Andrew (Author) / Seager, Thomas (Thesis director) / Margaret, Hinrichs (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
The problem is that children in developing countries are doing our dirty work. Electronic waste that end up in landfills in these developing countries pose a danger to the children extracting metals that are then resold in local markets. The dumping of solar panels in these landfills is sometimes the only alternative for some manufactures because there is no viable option for silicon wafers. Solar panel installations started to peak in the early 1990's . With the lifespan of a solar panel being 25 years, recycling these panel is not a priority task in government policies. First Solar is currently the only company in the United States that executes the full recycling process. However, there is an environmental hotspot and an energy intensity phase identified in their process. The second stage in First Solar's recycling method consist of hammering and shredding the solar panel to reduce the surface area to then move on the chemical path stage. This stage currently uses 1.1 kWh for a meter by meter solar cell. A thermal processing method was explored and found to be the most environmentally conscious chose in terms of emissions and energy cost. The thermal method uses a conventional furnace to burn away the EVA, leaving the internal components of the cell intact and ready for the remaining process of recycling. SLICE method aims to introduce an industry tailored, low energy cost process, that initiates a solar panel recycling infrastructure in the United States. The recycling infrastructure is needed to sustain the exponential growth of solar panels and avoid third party recycling to developing countries. This new method transitions from lab tested batch processes to a continuous process.
ContributorsMartinez, Mariana (Co-author) / Grayson, Madison (Co-author) / Seager, Thomas (Thesis director) / Ravikumar, Dwarak (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
The culture of the 1970s in the United States of America was progressive and revolutionary. Due to various events that were unfavorable to the public, U.S. citizens began to lose trust in their government. Signs of the public's revolt and dissention began to show in laws and propositions voters passed. In California, Proposition 13 was one of many anti-tax laws taxpayers voted for to cut back the control of the government. As a result, revenues for public services and improvements decreased and maintenance allocations for infrastructure systems were considerably reduced. Fast-forwarding to today, infrastructure systems in the U.S. are reaching their retirement period and are requiring extreme maintenance and attention. Los Angeles has been experiencing severe water main breaks in its water distribution system for several years now, but the city is lacking funds to replace the aging pipes. The lack of funds paired with aging infrastructure indicates there is a flaw in the forecasting analysis techniques used today to project infrastructure costs. Therefore, an alternative discounting function to the exponential is proposed: the hyperbolic discounting function. A comparative analysis was performed using a hyperbolic and an exponential discounting function. The two functions were calibrated over the course of 50 years and the parameters r and a were determined. Then the discounts were applied to a 50-year expenditure projection for pipe replacements of a water distribution system. The present value was computed with each discount function and results were obtained. By year 50, the hyperbolic function yielded a higher present value of $25.06 million and the exponential function yielded a present value of $14 million. These results lead to the conclusion that the hyperbolic discounting function is the preferred methodology when calculating long-term expenditures, especially those dependent on tax revenue.
ContributorsSawyer, Madeline Elizabeth (Author) / Seager, Thomas (Thesis director) / Clark, Susan (Committee member) / McBurnett, Lauren (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
In developed countries, municipalities deliver drinking water to constituents through water distribution systems. These transport water from a treatment plant to homes, restaurants, and any other site of end use. Proper water distribution system infrastructure functionality is a critical concern to city planners and managers because component failures within these systems restrict or prevent the ability to deliver water. The reduced capacity to deliver water forces the health and well being of all citizens into jeopardy. The breakdown of a component can even spark the failure of several more components, causing a sequence of cascading failures with catastrophic consequences. To make matters worse, some forms of component failures are unpredictable and it is impossible to foresee every possible failure that could occur. In order to prevent cataclysmic losses that are experienced during system failures, the development of resilient water distribution infrastructure is vital. A resilient water distribution system possesses an adaptive capacity to mitigate the loss of service resulting from component failures. Traditionally, infrastructure resilience research has been retrospective in nature, analyzing the infrastructure system after it suffered a failure event. However, this research project takes water distribution resilience research in a new direction. The research identifies the Sensing Anticipating, Adaptation, and Learning processes that are inherent in the current operations of each component in the water distribution system (pumps, pipes, valves, tanks, nodes). Additional SAAL processes have been recommended for the components that lack adaptive management in current practice. This workis unique in that it applies resilience theory to water distribution systems in an anticipatory manner. This anticipatory application of resilience will provide operators with actionable process for them to implement during failure situations. In this setting, resilience is applied to existing systems for noticeable improvements in operation during failure situations.
ContributorsRodriguez, Jordan Robert (Author) / Seager, Thomas (Thesis director) / Eisenberg, Daniel (Committee member) / Bondank, Emily (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / School of Sustainability (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Life Cycle Assessment (LCA) results are typically presented using default visualization and communication approaches without acknowledging: the goals of the end-user, the end-user’s level of knowledge in LCA, the qualitative explanation supporting the visual, and the uncertainty in the process. The motivating hypothesis of this research is that the way practitioners communicate and visualize LCA results poses a risk to the interpretations of the end-users, especially when the goal of the study is not of focus when designing the visuals. Different LCA goals, whether it is for comparisons, hotspot identifications, or environmental declarations, require different visualization designs. To test this, studies were conducted with a variety of participants by giving them several visual representations of LCA results and asking them to share their interpretations of them. The participants’ interpretations of each visual were compared to the opinions of a panel of LCA experts and to the author’s intended use of it. This research gives insight on where misalignments or enhancements in the interpretation of results can occur based on the visual representations used in a certain goal category and the other factors previously mentioned. The results also provided three more key findings: 1) The majority of visuals that accurately presented and communicated the results were in the same goal category that the authors intended the visuals to be used for, suggesting that visuals are more effective when designed with the goal of the study in mind. 2) Several visuals suggested misconceptions in the presentation of results which included a misconception of the participants, a misconception of the authors, or a misconception between all groups. 3) None of the visuals in the environmental declarations category received a consensus from the panel of experts that they were well-suited for that purpose which suggests a significant research gap in accurately visualizing results for these purposes. These results aided the development of guidance documents to suggest both what to consider and what to avoid based on the goal of the study. The findings from this study can assist in bridging the gap in communication between the practitioner and the end-user.
ContributorsGuglielmi, Giovanni (Author) / Seager, Thomas (Thesis advisor) / Chester, Mikhail (Committee member) / Prado, Valentina (Committee member) / Arizona State University (Publisher)
Created2023