Matching Items (38)
Description
Anaerobic digestion (AD), a common process in wastewater treatment plants, is traditionally assessed with Biochemical Methane Potential (BMP) tests. Hydrolysis is considered its rate-limiting step. During my research, I assessed the impact of pretreatment on BMPs and microbial electrochemical cells (MECs). In the first set of experiments, BMP tests were performed using alkaline and thermal pretreated waste activated sludge (WAS), a control group, and a negative control group as samples and AD sludge (ADS) as inoculum. The data obtained suggested that BMPs do not necessarily require ADS, since samples without inoculum produced 5-20% more CH4. However, ADS appears to reduce the initial methanogenesis lag in BMPs, as no pH inhibition and immediate CH4 production were observed. Consumption rate constants, which are related to hydrolysis, were calculated using three methods based on CH4 production, SSCOD concentration, and the sum of both, called the lumped parameter. All the values observed were within literature values, yet each provide a different picture of what is happening in the system. For the second set of experiments, the current production of 3 H-type MECs were compared to the CH4 production of BMPs to assess WAS solids' biodegradability and consumption rates relative to the pretreatment methods employed for their substrate. BMPs fed with pretreated and control WAS solids were performed at 0.42 and 1.42 WAS-to-ADS ratios. An initial CH4 production lag of about 12 days was observed in the BMP assays, but MECs immediately began producing current. When compared in terms of COD, MECs produced more current than the BMPs produced CH4, indicating that the MEC may be capable of consuming different types of substrate and potentially overestimating CH4 production in anaerobic digesters. I also observed 2 to 3 different consumption events in MECs versus 3 for BMP assays, but these had similar magnitudes, durations, and starting times in the control and thermal pretreated WAS-fed assays and not in alkaline assays. This might indicate that MECs identified the differences of alkaline pretreatment, but not between control WAS and thermal pretreated WAS. Furthermore, HPLC results suggest at least one hydrolysis event, as valerate, butyrate, and traces of acetate are observed in the reactors' effluents. Moreover, a possible inhibition of valerate-fixing microbial communities due to pretreatment and the impossibility of valerate consumption by ARB might explain its presence in the reactors' effluents.
ContributorsBrown Munoz, Francisco (Author) / Torres, Cesar (Thesis director) / Rittmann, Bruce E. (Committee member) / Chemical Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
Creating sustainable alternatives to fossil fuel resources is one of the greatest
challenges facing mankind. Solar energy provides an excellent option to alleviate modern dependence on fossil fuels. However, efficient methods to harness solar energy are still largely lacking. Biomass from photosynthetic organisms can be used as feedstock to produce traditional fuels, but must be produced in great quantities in order to meet the demands of growing populations. Cyanobacteria are prokaryotic photosynthetic microorganisms that can produce biomass on large scales using only sunlight, carbon dioxide, water, and small amounts of nutrients. Thus, Cyanobacteria are a viable option for sustainable production of biofuel feedstock material. Photobioreactors (PBRs) offer a high degree of control over the temperature, aeration, and mixing of cyanobacterial cultures, but cannot be kept sterile due to the scales necessary to meet domestic and global energy demands, meaning that heterotrophic bacteria can grow in PBRs by oxidizing the organic material produced and excreted by the Cyanobacteria. These heterotrophic bacteria can positively or negatively impact the performance of the PBR through their interactions with the Cyanobacteria. This work explores the microbial ecology in PBR cultures of the model cyanobacterium Synechocystis sp. PCC6803 (Synechocystis) using microbiological, molecular, chemical, and engineering techniques. I first show that diverse phylotypes of heterotrophic bacteria can associate with Synechocystis-based PBRs and that excluding them may be impossible under typical PBR operating conditions. Then, I demonstrate that high-throughput sequencing can reliably elucidate the structure of PBR microbial communities without the need for pretreatment to remove Synechocystis 16S rRNA genes, despite the high degree of polyploidy found in Synechocystis. Next, I establish that the structure of PBR microbial communities is strongly influenced by the microbial community of the inoculum culture. Finally, I show that maintaining available phosphorus in the culture medium promotes the production and enrichment of Synechocystis biomass in PBRs by reducing the amount of soluble substrates available to heterotrophic bacteria. This work presents the first analysis of the structure and function of microbial communities associated with Synechocystis-based PBRs.
challenges facing mankind. Solar energy provides an excellent option to alleviate modern dependence on fossil fuels. However, efficient methods to harness solar energy are still largely lacking. Biomass from photosynthetic organisms can be used as feedstock to produce traditional fuels, but must be produced in great quantities in order to meet the demands of growing populations. Cyanobacteria are prokaryotic photosynthetic microorganisms that can produce biomass on large scales using only sunlight, carbon dioxide, water, and small amounts of nutrients. Thus, Cyanobacteria are a viable option for sustainable production of biofuel feedstock material. Photobioreactors (PBRs) offer a high degree of control over the temperature, aeration, and mixing of cyanobacterial cultures, but cannot be kept sterile due to the scales necessary to meet domestic and global energy demands, meaning that heterotrophic bacteria can grow in PBRs by oxidizing the organic material produced and excreted by the Cyanobacteria. These heterotrophic bacteria can positively or negatively impact the performance of the PBR through their interactions with the Cyanobacteria. This work explores the microbial ecology in PBR cultures of the model cyanobacterium Synechocystis sp. PCC6803 (Synechocystis) using microbiological, molecular, chemical, and engineering techniques. I first show that diverse phylotypes of heterotrophic bacteria can associate with Synechocystis-based PBRs and that excluding them may be impossible under typical PBR operating conditions. Then, I demonstrate that high-throughput sequencing can reliably elucidate the structure of PBR microbial communities without the need for pretreatment to remove Synechocystis 16S rRNA genes, despite the high degree of polyploidy found in Synechocystis. Next, I establish that the structure of PBR microbial communities is strongly influenced by the microbial community of the inoculum culture. Finally, I show that maintaining available phosphorus in the culture medium promotes the production and enrichment of Synechocystis biomass in PBRs by reducing the amount of soluble substrates available to heterotrophic bacteria. This work presents the first analysis of the structure and function of microbial communities associated with Synechocystis-based PBRs.
ContributorsZevin, Alexander Simon (Author) / Rittmann, Bruce E. (Thesis advisor) / Krajmalnik-Brown, Rosa (Thesis advisor) / Vermaas, Willem Fj (Committee member) / Arizona State University (Publisher)
Created2015
Description
Microbial electrochemical cells (MXCs) serve as an alternative anaerobic technology to anaerobic digestion for efficient energy recovery from high-strength organic wastes such as primary sludge (PS). The overarching goal of my research was to address energy conversion from PS to useful resources (e.g. hydrogen or hydrogen peroxide) through bio- and electro-chemical anaerobic conversion processes in MXCs.
First, a new flat-pate microbial electrolysis cell (MEC) was designed with high surface area anodes using carbon fibers, but without creating a large distance between the anode and the cathode (<0.5 cm) to reduce Ohmic overpotential. Through the improved design, operation, and electrochemical characterization, the applied voltages were reduced from 1.1 to ~0.85 V, at 10 A m-2. Second, PS conversion was examined through hydrolysis, fermentation, methanogenesis, and/or anode respiration. Since pretreatment often is required to accelerate hydrolysis of organic solids, I evaluated pulsed electric field technology on PS showing a modest improvement of energy conversion through methanogenesis and fermentation, as compared to the conversion from waste activated sludge (WAS) or WAS+PS. Then, a two-stage system (prefermented PS-fed MEC) yielded successful performance in terms of Coulombic efficiency (95%), Coulombic recovery (CR, 80%), and COD-removal efficiency (85%). However, overall PS conversion to electrical current (or CR) through pre-fermentation and MEC, was just ~16%. Next, a single-stage system (direct PS-fed MEC) with semi-continuous operation showed 34% CR at a 9-day hydraulic retention time. The PS-fed MEC also showed an important pH dependency, in which high pH (> 8) in the anode chamber improved anode respiration along with methanogen inhibition. Finally, H2O2 was produced in a PS-fed microbial electrochemical cell with a low energy requirement (~0.87 kWh per kg H2O2). These research developments will provide groundbreaking knowledge for MXC design, commercial application, and anaerobic energy conversion from other high-strength organic wastes to resources.
First, a new flat-pate microbial electrolysis cell (MEC) was designed with high surface area anodes using carbon fibers, but without creating a large distance between the anode and the cathode (<0.5 cm) to reduce Ohmic overpotential. Through the improved design, operation, and electrochemical characterization, the applied voltages were reduced from 1.1 to ~0.85 V, at 10 A m-2. Second, PS conversion was examined through hydrolysis, fermentation, methanogenesis, and/or anode respiration. Since pretreatment often is required to accelerate hydrolysis of organic solids, I evaluated pulsed electric field technology on PS showing a modest improvement of energy conversion through methanogenesis and fermentation, as compared to the conversion from waste activated sludge (WAS) or WAS+PS. Then, a two-stage system (prefermented PS-fed MEC) yielded successful performance in terms of Coulombic efficiency (95%), Coulombic recovery (CR, 80%), and COD-removal efficiency (85%). However, overall PS conversion to electrical current (or CR) through pre-fermentation and MEC, was just ~16%. Next, a single-stage system (direct PS-fed MEC) with semi-continuous operation showed 34% CR at a 9-day hydraulic retention time. The PS-fed MEC also showed an important pH dependency, in which high pH (> 8) in the anode chamber improved anode respiration along with methanogen inhibition. Finally, H2O2 was produced in a PS-fed microbial electrochemical cell with a low energy requirement (~0.87 kWh per kg H2O2). These research developments will provide groundbreaking knowledge for MXC design, commercial application, and anaerobic energy conversion from other high-strength organic wastes to resources.
ContributorsKi, Dong Won (Author) / Torres, César I (Thesis advisor) / Rittmann, Bruce E. (Committee member) / Krajmalnik-Brown, Rosa (Committee member) / Parameswaran, Prathap (Committee member) / Popat, Sudeep C (Committee member) / Arizona State University (Publisher)
Created2016
Description
The finite supply of current energy production materials has created opportunities for the investigation of alternative energy sources in many fields. One example is the use of microorganisms in bioenergy applications, such as microbial fuel cells. Present in many types of environments, microorganisms with the ability to respire solid electron acceptors have become of increasing relevance to alternative energy and wastewater treatment research. In this dissertation, several aspects of anode respiration are investigated, with the goal of increasing the limited understanding of the mechanisms of electron transport through the use of advanced electrochemical methods. Biofilms of Geobacter sulfurreducens, the model anode respiring organism, as well as its alkaliphilic relative, Geoalkalibacter ferrihydriticus, were investigated using chronoamperometry, electrochemical impedance spectroscopy, and cyclic voltammetry.
In G. sulfurreducens, two distinct pathways of electron transport were observed through the application of advanced electrochemical techniques on anode biofilms in microbial electrochemical cells. These pathways were found to be preferentially expressed, based on the poised anode potential (redox potential) of the electrode. In Glk. ferrihydriticus, four pathways for electron transport were found, showing an even greater diversity in electron transport pathway utilization as compared to G. sulfurreducens. These observations provide insights into the diversity of electron transport pathways present in anode-respiring bacteria and introduce the necessity of further characterization for pathway identification.
Essential to science today, communication of pressing scientific issues to the lay audience may present certain difficulties. This can be seen especially with the topics that are considered socio-scientific issues, those considered controversial in society but not for scientists. This dissertation explores the presentation of alternative and renewable energy technologies and climate change in undergraduate education. In introductory-level Biology, Chemistry, and Physics textbooks, the content and terminology presented were analyzed for individual textbooks and used to evaluate discipline-based trends. Additional extensions were made between teaching climate change with the active learning technique of citizen science using past research gains from studies of evolution. These observations reveal patterns in textbook content for energy technologies and climate change, as well as exploring new aspects of teaching techniques.
In G. sulfurreducens, two distinct pathways of electron transport were observed through the application of advanced electrochemical techniques on anode biofilms in microbial electrochemical cells. These pathways were found to be preferentially expressed, based on the poised anode potential (redox potential) of the electrode. In Glk. ferrihydriticus, four pathways for electron transport were found, showing an even greater diversity in electron transport pathway utilization as compared to G. sulfurreducens. These observations provide insights into the diversity of electron transport pathways present in anode-respiring bacteria and introduce the necessity of further characterization for pathway identification.
Essential to science today, communication of pressing scientific issues to the lay audience may present certain difficulties. This can be seen especially with the topics that are considered socio-scientific issues, those considered controversial in society but not for scientists. This dissertation explores the presentation of alternative and renewable energy technologies and climate change in undergraduate education. In introductory-level Biology, Chemistry, and Physics textbooks, the content and terminology presented were analyzed for individual textbooks and used to evaluate discipline-based trends. Additional extensions were made between teaching climate change with the active learning technique of citizen science using past research gains from studies of evolution. These observations reveal patterns in textbook content for energy technologies and climate change, as well as exploring new aspects of teaching techniques.
ContributorsYoho, Rachel Ann (Author) / Torres, César I (Thesis advisor) / Rittmann, Bruce E. (Committee member) / Popat, Sudeep C (Committee member) / Vanmali, Binaben H (Committee member) / Arizona State University (Publisher)
Created2016
Description
The application of microalgal biofilms in wastewater treatment has great advantages such as abolishing the need for energy intensive aerators and recovering nutrients as energy, thus reducing the energy requirement of wastewater treatment several-fold. A 162 cm2 algal biofilm reactor with good wastewater treatment performance and a regular harvesting procedure was studied at lab scale to gain an understanding of effectual parameters such as hydraulic retention time (HRT; 2.6 and 1.3 hrs), liquid level (LL; 0.5 and 1.0 cm), and solids retention time (SRT; 3 and 1.5 wks). A revised synthetic wastewater “Syntho 3.7” was used as a surrogate of domestic primary effluent for nutrient concentration consistency in the feed lines. In the base case (2.6 hr HRT, 0.5 cm LL, and 3 wk SRT), percent removals of 69 ± 2 for total nitrogen (TN), 54 ± 21 for total phosphorous (TP), and 60 ± 7 for chemical oxygen demand (COD) were achieved and 4.0 ± 1.6 g/m2/d dry biomass was produced. A diffusion limitation was encountered when increasing the liquid level, while the potential to further decrease the HRT remains. Nonlinear growth kinetics was observed in comparing SRT variations, and promoting autotrophic growth seems possible. Future work will look towards producing a mathematical model and further testing the aptness of this system for large-scale implementation.
ContributorsHalloum, Ibrahim (Author) / Torres, César I (Thesis advisor) / Popat, Sudeep C (Committee member) / Rittmann, Bruce E. (Committee member) / Arizona State University (Publisher)
Created2016
Description
Obesity is a worldwide epidemic accompanied by multiple comorbidities. Bariatric surgery is currently the most efficient treatment for morbid obesity and its comorbidities. The etiology of obesity is unknown, although genetic, environmental, and most recently, microbiome elements have been recognized as contributors to this rising epidemic. The role of the gut microbiome in weight-loss or weight-gain warrants investigation, and bariatric surgery provides a good model to study influences of the microbiome on host metabolism. The underlying goals of my research were to analyze (i) the factors that change the microbiome after bariatric surgery, (ii) the effects of different types of bariatric surgeries on the gut microbiome and metabolism, (iii) the role of the microbiome on the success of bariatric surgery, and (iv) temporal and spatial changes of the microbiome after bariatric surgery.
Roux-en-Y gastric bypass (RYGB) rearranges the gastrointestinal tract and reduces gastric acid secretions. Therefore, pH could be one of the factors that change microbiome after RYGB. Using mixed-cultures and co-cultures of species enriched after RYGB, I showed that as small as 0.5 units higher gut pH can aid in the survival of acid-sensitive microorganisms after RYGB and alter gut microbiome function towards the production of weight loss-associated metabolites. By comparing microbiome after two different bariatric surgeries, RYGB and laparoscopic adjustable gastric banding (LAGB), I revealed that gut microbiome structure and metabolism after RYGB are remarkably different than LAGB, and LAGB change microbiome minimally. Given the distinct RYGB alterations to the microbiome, I examined the contribution of the microbiome to weight loss. Analyses revealed that Fusobacterium might lessen the success of RYGB by producing putrescine, which may enhance weight-gain and could serve as biomarker for unsuccessful RYGB.
Finally, I showed that RYGB alters the luminal and the mucosal microbiome. Changes in gut microbial metabolic products occur in the short-term and persist over the long-term. Overall, the work in this dissertation provides insight into how the gut microbiome structure and function is altered after bariatric surgery, and how these changes potentially affect the host metabolism. These findings will be helpful in subsequent development of microbiome-based therapeutics to treat obesity.
Roux-en-Y gastric bypass (RYGB) rearranges the gastrointestinal tract and reduces gastric acid secretions. Therefore, pH could be one of the factors that change microbiome after RYGB. Using mixed-cultures and co-cultures of species enriched after RYGB, I showed that as small as 0.5 units higher gut pH can aid in the survival of acid-sensitive microorganisms after RYGB and alter gut microbiome function towards the production of weight loss-associated metabolites. By comparing microbiome after two different bariatric surgeries, RYGB and laparoscopic adjustable gastric banding (LAGB), I revealed that gut microbiome structure and metabolism after RYGB are remarkably different than LAGB, and LAGB change microbiome minimally. Given the distinct RYGB alterations to the microbiome, I examined the contribution of the microbiome to weight loss. Analyses revealed that Fusobacterium might lessen the success of RYGB by producing putrescine, which may enhance weight-gain and could serve as biomarker for unsuccessful RYGB.
Finally, I showed that RYGB alters the luminal and the mucosal microbiome. Changes in gut microbial metabolic products occur in the short-term and persist over the long-term. Overall, the work in this dissertation provides insight into how the gut microbiome structure and function is altered after bariatric surgery, and how these changes potentially affect the host metabolism. These findings will be helpful in subsequent development of microbiome-based therapeutics to treat obesity.
ContributorsIlhan, Zehra Esra (Author) / Krajmalnik-Brown, Rosa (Thesis advisor) / DiBaise, John K. (Committee member) / Cadillo-Quiroz, Hinsby (Committee member) / Rittmann, Bruce E. (Committee member) / Arizona State University (Publisher)
Created2016
Description
One solution to mitigating global climate change is using cyanobacteria or single-celled algae (collectively microalgae) to replace petroleum-based fuels and products, thereby reducing the net release of carbon dioxide. This work develops and evaluates a mechanistic kinetic model for light-dependent microalgal growth. Light interacts with microalgae in a variety of positive and negative ways that are captured by the model: light intensity (LI) attenuates through a microalgal culture, light absorption provides the energy and electron flows that drive photosynthesis, microalgae pool absorbed light energy, microalgae acclimate to different LI conditions, too-high LI causes damage to the cells’ photosystems, and sharp increases in light cause severe photoinhibition that inhibits growth. The model accounts for all these phenomena by using a set of state variables that represent the pooled light energy, photoacclimation, PSII photo-damage, PSII repair inhibition and PSI photodamage. Sets of experiments were conducted with the cyanobacterium Synechocystis sp. PCC 6803 during step-changes in light intensity and flashing light. The model was able to represent and explain all phenomena observed in the experiments. This included the spike and depression in growth rate following an increasing light step, the temporary depression in growth rate following a decreasing light step, the shape of the steady-state growth-irradiance curve, and the “blending” of light and dark periods under rapid flashes of light. The LI model is a marked improvement over previous light-dependent growth models, and can be used to design and interpret future experiments and practical systems for generating renewable feedstock to replace petroleum.
ContributorsStraka, Levi (Author) / Rittmann, Bruce E. (Thesis advisor) / Fox, Peter (Committee member) / Torres, César I (Committee member) / Arizona State University (Publisher)
Created2017
Description
The microbial electrochemical cell (MXC) is a novel environmental-biotechnology platform for renewable energy production from waste streams. The two main goals of MXCs are recovery of renewable energy and production of clean water. Up to now, energy recovery, Coulombic efficiency (CE), and treatment efficiency of MXCs fed with real wastewater have been low. Therefore, the overarching goal of my research was to address the main causes for these low efficiencies; this knowledge will advance MXCs technology toward commercialization.
First, I found that fermentation, not anode respiration, was the rate-limiting step for achieving complete organics removal, along with high current densities and CE. The best performance was achieved by doing most of the fermentation in an independent reactor that preceded the MXC. I also outlined how the efficiency of fermentation inside MXCs can be enhanced in order to make MXCs-based technologies cost-competitive with other anaerobic environmental biotechnologies. I revealed that the carbohydrate and protein contents and the BOD5/COD ratio governed the efficiency of organic-matter fermentation: high protein content and low BOD5/COD ratio were the main causes for low fermentation efficiency.
Next, I showed how a high ammonium concentration can provide kinetic and metabolic advantages or disadvantages for anode-respiring bacteria (ARB) over their competitors, particularly methanogens. When exposed to a relatively high ammonium concentration (i.e., > 2.2 g total ammonia-nitrogen (TAN)/L), the ARB were forced to divert a greater electron flow toward current generation and, consequently, had lower net biomass yield. However, the ARB were relatively more resistant to high free ammonia-nitrogen (FAN) concentrations, up to 200 mg FAN/L. I used FAN to manage ecological interactions among ARB and non-ARB in an MXC fed with fermentable substrate (glucose). Utilizing a combination of chemical, electrochemical, and genomic tools, I found that increased FAN led to higher CE and lower methane (CH4) production by suppressing methanogens. Thus, managing FAN offers a practical means to suppress methanogenesis, instead of using expensive and unrealistic inhibitors. My research findings open up new opportunities for more efficient operation of MXCs; this will enhance MXC scale-up and commercial applications, particularly for energy-positive treatment of waste streams containing recalcitrant organics.
First, I found that fermentation, not anode respiration, was the rate-limiting step for achieving complete organics removal, along with high current densities and CE. The best performance was achieved by doing most of the fermentation in an independent reactor that preceded the MXC. I also outlined how the efficiency of fermentation inside MXCs can be enhanced in order to make MXCs-based technologies cost-competitive with other anaerobic environmental biotechnologies. I revealed that the carbohydrate and protein contents and the BOD5/COD ratio governed the efficiency of organic-matter fermentation: high protein content and low BOD5/COD ratio were the main causes for low fermentation efficiency.
Next, I showed how a high ammonium concentration can provide kinetic and metabolic advantages or disadvantages for anode-respiring bacteria (ARB) over their competitors, particularly methanogens. When exposed to a relatively high ammonium concentration (i.e., > 2.2 g total ammonia-nitrogen (TAN)/L), the ARB were forced to divert a greater electron flow toward current generation and, consequently, had lower net biomass yield. However, the ARB were relatively more resistant to high free ammonia-nitrogen (FAN) concentrations, up to 200 mg FAN/L. I used FAN to manage ecological interactions among ARB and non-ARB in an MXC fed with fermentable substrate (glucose). Utilizing a combination of chemical, electrochemical, and genomic tools, I found that increased FAN led to higher CE and lower methane (CH4) production by suppressing methanogens. Thus, managing FAN offers a practical means to suppress methanogenesis, instead of using expensive and unrealistic inhibitors. My research findings open up new opportunities for more efficient operation of MXCs; this will enhance MXC scale-up and commercial applications, particularly for energy-positive treatment of waste streams containing recalcitrant organics.
ContributorsMohamed, Mohamed Mahmoud Ali (Author) / Rittmann, Bruce E. (Thesis advisor) / Torres, Cesar I. (Thesis advisor) / Westerhoff, Paul (Committee member) / Parameswaran, Prathap (Committee member) / Arizona State University (Publisher)
Created2016
Description
ABSTRACT
Sustainable global energy production is one of the grand challenges of the 21st century. Next-generation renewable energy sources include using photosynthetic microbes such as cyanobacteria for efficient production of sustainable fuels from sunlight. The cyanobacterium Synechocystis PCC 6803 (Synechocystis) is a genetically tractable model organism for plant-like photosynthesis that is used to develop microbial biofuel technologies. However, outside of photosynthetic processes, relatively little is known about the biology of microbial phototrophs such as Synechocystis, which impairs their development into market-ready technologies. My research objective was to characterize strategic aspects of Synechocystis biology related to its use in biofuel production; specifically, how the cell surface modulates the interactions between Synechocystis cells and the environment. First, I documented extensive biofouling, or unwanted biofilm formation, in a 4,000-liter roof-top photobioreactor (PBR) used to cultivate Synechocystis, and correlated this cell-binding phenotype with changes in nutrient status by developing a bench-scale assay for axenic phototrophic biofilm formation. Second, I created a library of mutants that lack cell surface structures, and used this biofilm assay to show that mutants lacking the structures pili or S-layer have a non-biofouling phenotype. Third, I analyzed the transcriptomes of cultures showing aggregation, another cell-binding phenotype, and demonstrated that the cells were undergoing stringent response, a type of conserved stress response. Finally, I used contaminant Consortia and statistical modeling to test whether Synechocystis mutants lacking cell surface structures could reduce contaminant growth in mixed cultures. In summary, I have identified genetic and environmental means of manipulating Synechocystis strains for customized adhesion phenotypes, for more economical biomass harvesting and non-biofouling methods. Additionally, I developed a modified biofilm assay and demonstrated its utility in closing a key gap in the field of microbiology related to axenic phototrophic biofilm formation assays. Also, I demonstrated that statistical modeling of contaminant Consortia predicts contaminant growth across diverse species. Collectively, these findings serve as the basis for immediately lowering the cost barrier of Synechocystis biofuels via a more economical biomass-dewatering step, and provide new research tools for improving Synechocystis strains and culture ecology management for improved biofuel production.
Sustainable global energy production is one of the grand challenges of the 21st century. Next-generation renewable energy sources include using photosynthetic microbes such as cyanobacteria for efficient production of sustainable fuels from sunlight. The cyanobacterium Synechocystis PCC 6803 (Synechocystis) is a genetically tractable model organism for plant-like photosynthesis that is used to develop microbial biofuel technologies. However, outside of photosynthetic processes, relatively little is known about the biology of microbial phototrophs such as Synechocystis, which impairs their development into market-ready technologies. My research objective was to characterize strategic aspects of Synechocystis biology related to its use in biofuel production; specifically, how the cell surface modulates the interactions between Synechocystis cells and the environment. First, I documented extensive biofouling, or unwanted biofilm formation, in a 4,000-liter roof-top photobioreactor (PBR) used to cultivate Synechocystis, and correlated this cell-binding phenotype with changes in nutrient status by developing a bench-scale assay for axenic phototrophic biofilm formation. Second, I created a library of mutants that lack cell surface structures, and used this biofilm assay to show that mutants lacking the structures pili or S-layer have a non-biofouling phenotype. Third, I analyzed the transcriptomes of cultures showing aggregation, another cell-binding phenotype, and demonstrated that the cells were undergoing stringent response, a type of conserved stress response. Finally, I used contaminant Consortia and statistical modeling to test whether Synechocystis mutants lacking cell surface structures could reduce contaminant growth in mixed cultures. In summary, I have identified genetic and environmental means of manipulating Synechocystis strains for customized adhesion phenotypes, for more economical biomass harvesting and non-biofouling methods. Additionally, I developed a modified biofilm assay and demonstrated its utility in closing a key gap in the field of microbiology related to axenic phototrophic biofilm formation assays. Also, I demonstrated that statistical modeling of contaminant Consortia predicts contaminant growth across diverse species. Collectively, these findings serve as the basis for immediately lowering the cost barrier of Synechocystis biofuels via a more economical biomass-dewatering step, and provide new research tools for improving Synechocystis strains and culture ecology management for improved biofuel production.
ContributorsAllen, Rebecca Custer (Author) / Curtiss Iii, Roy (Thesis advisor) / Krajmalnik-Brown, Rosa (Thesis advisor) / Rittmann, Bruce E. (Committee member) / Vermaas, Willem (Committee member) / Arizona State University (Publisher)
Created2016
Description
In recent years, the world has debated the idea of biofuels as a solution to energy security, energy independence, and global climate change. However, as the biofuels movement has unfolded, crucial issues emerged regarding biofuels efficacy and efficiency. The deployment of biofuels of marginal benefit has raised questions about how countries like the USA may have found themselves so invested in a potentially failing technology. In order to better understand and evaluate these issues, this study utilizes the Ostrom Institutional Analysis and Development (IAD) framework to better evaluate these issues and analyze interacting institutions that shape US biofuel policy. The IAD framework is a model that enables one to study, conceptualize, compare, and make connections across decision arenas that would otherwise be distinct from each other. By analyzing the interactions of relevant institutions, one can see how different dynamic interests interacted to shape biofuel policy in the USA today. Conclusions from this analysis include: the IAD framework is ideal for analyzing the political and economic case for biofuels. The five action arenas identified in this thesis are sufficient to understand corn bioethanol policy. A compelling case for supporting bioethanol is not made. An international agreement to reduce GHG emissions could change the landscape for biofuels. Finally, there is little prospect for biofuels playing a significant role in the near term without greater alignment among the action arenas.
ContributorsDirks, Lisa Carrol (Author) / Wu, Jingle (Thesis advisor) / Anderies, John Marty (Committee member) / Rittmann, Bruce E. (Committee member) / Arizona State University (Publisher)
Created2010