Matching Items (74)
Filtering by
Description
As world energy demands increase, research into more efficient energy production methods has become imperative. Heterogeneous catalysis and nanoscience are used to promote chemical transformations important for energy production. These concepts are important in solid oxide fuel cells (SOFCs) which have attracted attention because of their potential to provide an efficient and environmentally favorable power generation system. The SOFC is also fuel-flexible with the ability to run directly on many fuels other than hydrogen. Internal fuel reforming directly in the anode of the SOFC would greatly reduce the cost and complexity of the device. Methane is the simplest hydrocarbon and a main component in natural gas, making it useful when testing catalysts on the laboratory scale. Nickel (Ni) and gadolinium (Gd) doped ceria (CeO2) catalysts for potential use in the SOFC anode were synthesized with a spray drying method and tested for catalytic performance using partial oxidation of methane and steam reforming. The relationships between catalytic performance and structure were then investigated using X-ray diffraction, transmission electron microscopy, and environmental transmission electron microscopy. The possibility of solid solutions, segregated phases, and surface layers of Ni were explored. Results for a 10 at.% Ni in CeO2 catalyst reveal a poor catalytic behavior while a 20 at.% Ni in CeO2 catalyst is shown to have superior activity. The inclusion of both 10 at.% Gd and 10 at.% Ni in CeO2 enhances the catalytic performance. Analysis of the presence of Ni in all 3 samples reveals Ni heterogeneity and little evidence for extensive solid solution doping. Ni is found in small domains throughout CeO2 particles. In the 20 at.% Ni sample a segregated, catalytically active NiO phase is observed. Overall, it is found that significant interaction between Ni and CeO2 occurs that could affect the synthesis and functionality of the SOFC anode.
ContributorsCavendish, Rio (Author) / Crozier, Peter (Thesis advisor) / Adams, James (Committee member) / Smith, David (Committee member) / Arizona State University (Publisher)
Created2012
Description
In this dissertation, in-situ X-ray and ultraviolet photoemission spectroscopy have been employed to study the interface chemistry and electronic structure of potential high-k gate stack materials. In these gate stack materials, HfO2 and La2O3 are selected as high-k dielectrics, VO2 and ZnO serve as potential channel layer materials. The gate stack structures have been prepared using a reactive electron beam system and a plasma enhanced atomic layer deposition system. Three interrelated issues represent the central themes of the research: 1) the interface band alignment, 2) candidate high-k materials, and 3) band bending, internal electric fields, and charge transfer. 1) The most highlighted issue is the band alignment of specific high-k structures. Band alignment relationships were deduced by analysis of XPS and UPS spectra for three different structures: a) HfO2/VO2/SiO2/Si, b) HfO2-La2O3/ZnO/SiO2/Si, and c) HfO2/VO2/ HfO2/SiO2/Si. The valence band offset of HfO2/VO2, ZnO/SiO2 and HfO2/SiO2 are determined to be 3.4 ± 0.1, 1.5 ± 0.1, and 0.7 ± 0.1 eV. The valence band offset between HfO2-La2O3 and ZnO was almost negligible. Two band alignment models, the electron affinity model and the charge neutrality level model, are discussed. The results show the charge neutrality model is preferred to describe these structures. 2) High-k candidate materials were studied through comparison of pure Hf oxide, pure La oxide, and alloyed Hf-La oxide films. An issue with the application of pure HfO2 is crystallization which may increase the leakage current in gate stack structures. An issue with the application of pure La2O3 is the presence of carbon contamination in the film. Our study shows that the alloyed Hf-La oxide films exhibit an amorphous structure along with reduced carbon contamination. 3) Band bending and internal electric fields in the gate stack structure were observed by XPS and UPS and indicate the charge transfer during the growth and process. The oxygen plasma may induce excess oxygen species with negative charges, which could be removed by He plasma treatment. The final HfO2 capping layer deposition may reduce the internal potential inside the structures. The band structure was approaching to a flat band condition.
ContributorsZhu, Chiyu (Author) / Nemanich, Robert (Thesis advisor) / Chamberlin, Ralph (Committee member) / Chen, Tingyong (Committee member) / Ponce, Fernando (Committee member) / Smith, David (Committee member) / Arizona State University (Publisher)
Created2012
Description
The storm events of summer 2014 proved to be some of the highest on record for Maricopa County. Flash flooding has been an ongoing issue within Arizona during the monsoon season due to the remnants of hurricanes that result in short, high intensity storms. The proximity of these intense storm events and their corresponding flooding structures is imperative in reducing the impact of these events on the community. The analysis of the maximum precipitation events for Tempe, Scottsdale, Phoenix, Mesa, Chandler, Goodyear, Peoria, Avondale and Glendale during the summer of 2014 proved that there were many events that had a calculated recurrence of 100 years or greater. The storm event with the most precipitation events with a recurrence of 100 years or greater was September 8, 2014. This storm event also produced a streamflow response that had the highest recorded streamflow at gages near the events with a 100 year recurrence. These intervals represent a larger amount of rain during a precipitation event and this correlation suggests that short burst of extreme weather was not a trend in this data. Rather, high storm events occurred over the span of 24 hours. The most frequent response of the stream gage to this rain event was a streamflow event that has a recurrence of 2-5 years. This suggests that the channels and flooding structures used to contain the rain events were effective in reducing the amount of water and therefore effectively managing the flooding response. An analysis of newspaper commentary and an interview with a representative from the Flood Control District of Maricopa County (FCDMC) indicated that there is a disconnect between public perception and the structure of FCDMC. Through this analysis a better understanding of the FCDMC as well as the impact of severe storm events in Maricopa County was found.
ContributorsBrancati, Olivia Anne (Author) / Vivoni, Enrique (Thesis director) / White, Dave (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Water affinity and condensation on Si-based surfaces is investigated to address the problem of fogging on silicone intraocular lenses (IOL) during cataract surgery, using Si(100), silica (SiO2) and polydimethylsiloxane (PDMS) silicone (SiOC2H6)n. Condensation is described by two step nucleation and growth where roughness controls heterogeneous nucleation of droplets followed by Ostwald ripening. Wetting on hydrophilic surfaces consists of continuous aqueous films while hydrophobic surfaces exhibit fogging with discrete droplets. Si-based surfaces with wavelength above 200 nm exhibit fogging during condensation. Below 200 nm, surfaces are found to wet during condensation. Water affinity of Si-based surfaces is quantified via the surface free energy (SFE) using Sessile drop contact angle analysis, the Young-Dupré equation, and Van Oss theory. Topography is analyzed using tapping mode atomic force microscopy (TMAFM). Polymer adsorption and ion beam modification of materials (IBMM) can modify surface topography, composition, and SFE, and alter water affinity of the Si-based surfaces we studied. Wet adsorption of hydroxypropyl methylcellulose (HPMC) C32H60O19 with areal densities ranging from 1018 atom/cm2 to 1019 atom/cm2 characterized via Rutherford backscattering spectrometry (RBS), allows for the substrate to adopt the topography of the HPMC film and its hydrophilic properties. The HPMC surface composition maintains a bulk stoichiometric ratio as confirmed by 4.265 MeV 12C(α, α)12C and 3.045 MeV 16O(α, α)16O, and 2.8 MeV He++ elastic recoil detection (ERD) of hydrogen. Both PIXE and RBS methods give comparable areal density results of polymer films on Si(100), silica, and PDMS silicone substrates. The SFE and topography of PDMS silicone polymers used for IOLs can also be modified by IBMM. IBMM of HPMC cellulose occurs during IBA as well. Damage curves and ERD are shown to characterize surface desorption accurately during IBMM so that ion beam damage can be accounted for during analysis of polymer areal density and composition. IBMM of Si(100)-SiO2 ordered interfaces also induces changes of SFE, as ions disorder surface atoms. The SFE converges for all surfaces, hydrophobic and hydrophilic, as ions alter electrochemical properties of the surface via atomic and electronic displacements.
ContributorsXing, Qian (Author) / Herbots, Nicole (Thesis advisor) / Culbertson, Robert (Thesis advisor) / Chamberlin, Ralph (Committee member) / Treacy, Michael (Committee member) / Smith, David (Committee member) / Arizona State University (Publisher)
Created2011
Description
Our thesis project, blanknationalpark.com, asked one question : how is climate change impacting National Parks in America? We decided to travel to three different areas: Joshua Tree, Glacier and Everglades National Park. It didn’t take long to discover that there was never a definitive answer. The effects of climate change looked different in every park we visited. Joshua Tree was struggling with changes in temperature, climate regime and an increase in fires. The U.S Geological Survey predicted that all of the glaciers in Glacier National Park could be gone by 2030. Everglades National Park was facing the constant threat of sea-level rise, invasive species and stronger hurricanes. However, in every park, one thing was certain - they all would not have their iconic features in the future due to climate change. For our thesis, we created blanknationalpark.com to emphasize the fact that Joshua Tree National Park won’t have Joshua Trees in the coming centuries, glaciers would cease to exist in Glacier National Park and the entire Everglades ecosystem itself will be underwater in the next century and a half. Thus, our project name, “Blank National Park”, pays tribute to the uncertainty of what these famous landscapes could look like in the future. Our main goal was to provide the public with a visual experience that is not only informative but engaging so that we could provide an educational experience about a critical situation without appearing too dismal. We chose to include our last page, ‘Solutions’, to establish hope for the future, and encourage people to take action to help preserve National Parks and the world we live in.
ContributorsCutler, Alison Jane (Co-author) / Nagaishi, Ayano (Co-author) / White, Dave (Thesis director) / Muench, Sarah (Committee member) / Walter Cronkite School of Journalism & Mass Comm (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
As inhabitants of a desert, a sustainable water source has always been and will continue to be a crucial component in developing the cities Arizonans call home. Phoenix and the surrounding municipalities make up a large metropolitan area that continues to grow in spatial size and population. However, as climate change becomes more of an evident challenge, Arizona is forced to plan and make decisions regarding its ability to safely and efficiently maintain its livelihood and/or growth. With the effects of climate change in mind, Arizona will need to continue to innovatively and proactively address issues of water management and the effects of urban heat island (UHI). The objective of this thesis was to study the socioeconomic impacts of four extreme scenarios of the future Phoenix metropolitan area. Each of the scenarios showcased a different hypothetical extreme and uniquely impacted factors related to water management and UHI. The four scenarios were a green city, desert city, expanded city into desert land, and expanded city into agricultural land. These four scenarios were designed to emphasize different aspects of the urban water-energy-population nexus, as the future of the Phoenix metropolitan area is dynamic. Primarily, the Green City and Desert City served as contrasting viewpoints on UHI and water sustainability. The Expanded Cities showed the influence of population growth and land use on water sustainability. The socioeconomic impacts of the four scenarios were then analyzed. The quantitative data of the report was completed using the online user interface of WaterSim 5.0 (a program created by the Decision Center for a Desert City (DCDC) at Arizona State University). The different scenarios were modeled in the program by adjusting various demand and supply oriented factors. The qualitative portion as well as additional quantitative data was acquired through an extensive literature review. It was found that changing land use has direct water use implications; agricultural land overtaken for municipal uses can sustain a population for longer. Though, removing agricultural lands has both social and economic implications, and can actually cause the elimination of an emergency source. Moreover, it was found that outdoor water use and reclaimed wastewater can impact water sustainability. Practices that decrease outdoor water use and increase wastewater reclamation are currently occurring; however, these practices could be augmented. Both practices require changes in the publics' opinions on water use, nevertheless, the technology and policy exists and can be intensified to become more water sustainable. While the scenarios studied were hypothetical cases of the future of the Phoenix metropolitan area, they identified important circumscribing measures and practices that influence the Valley's water resources.
ContributorsVon Gnechten, Rachel Marie (Author) / Wang, Zhihua (Thesis director) / White, Dave (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
Traditional Reinforcement Learning (RL) assumes to learn policies with respect to reward available from the environment but sometimes learning in a complex domain requires wisdom which comes from a wide range of experience. In behavior based robotics, it is observed that a complex behavior can be described by a combination of simpler behaviors. It is tempting to apply similar idea such that simpler behaviors can be combined in a meaningful way to tailor the complex combination. Such an approach would enable faster learning and modular design of behaviors. Complex behaviors can be combined with other behaviors to create even more advanced behaviors resulting in a rich set of possibilities. Similar to RL, combined behavior can keep evolving by interacting with the environment. The requirement of this method is to specify a reasonable set of simple behaviors. In this research, I present an algorithm that aims at combining behavior such that the resulting behavior has characteristics of each individual behavior. This approach has been inspired by behavior based robotics, such as the subsumption architecture and motor schema-based design. The combination algorithm outputs n weights to combine behaviors linearly. The weights are state dependent and change dynamically at every step in an episode. This idea is tested on discrete and continuous environments like OpenAI’s “Lunar Lander” and “Biped Walker”. Results are compared with related domains like Multi-objective RL, Hierarchical RL, Transfer learning, and basic RL. It is observed that the combination of behaviors is a novel way of learning which helps the agent achieve required characteristics. A combination is learned for a given state and so the agent is able to learn faster in an efficient manner compared to other similar approaches. Agent beautifully demonstrates characteristics of multiple behaviors which helps the agent to learn and adapt to the environment. Future directions are also suggested as possible extensions to this research.
ContributorsVora, Kevin Jatin (Author) / Zhang, Yu (Thesis advisor) / Yang, Yezhou (Committee member) / Praharaj, Sarbeswar (Committee member) / Arizona State University (Publisher)
Created2021
Description
Food waste is one of the most significant food system inefficiencies with environmental, financial, and social consequences. This waste, which occurs more at the consumer stage in high income countries, is often attributed to consumers’ behavior. While behavior is a contributing factor, the role of other contextual factors in influencing this behavior has not been systematically analyzed. Understanding contextual drivers of consumer food waste behavior is important, as behavior sits in a matrix of technology, infrastructures, institutions and social structure. Hence designing effective interventions will require a systems perceptive of the problem. In paper 1, I used Socio-ecological framing to understand how personal, interpersonal, socio-cultural, built, and institutional environments contribute to food waste at the consumer stage. In paper 2, I explored the perception of stakeholders in Phoenix on the effectiveness and feasibility of possible interventions that could be used to tackle consumer food waste. In paper 3, I examined the impact of knowledge and awareness of the environmental consequence of food waste in terms of embedded water and energy on the cognitive factors responsible for consumer food waste behavior. Across these three papers, I have identified three findings. First, the most influential factor responsible for consumer food waste is meal planning, as many decisions about food management depend on it. However, there are many contextual factors that discourage meal planning. Other factors identified include the wide gap between food producers and consumers, the low price of food, and marketing strategies used by retailers to encourage food purchases. Systems level interventions will be required to address these drivers that provide an enabling environment for behavioral change. Second stakeholders in the city overwhelmingly support and agree that education will be the most effective and feasible intervention to address consumer food waste, 3) there is need to carefully craft education materials to inform consumers about other resources, such as water and energy, embedded in food waste to stimulate a personal norm that motivates change in behavior. In this study, I emphasize the need to understand the root causes of consumer food waste and exploration of systems level interventions, in combination with education and information interventions that are being commonly used.
ContributorsOpejin, Adenike Kafayat (Author) / Aggarwal, Rimjhim (Thesis advisor) / White, Dave (Thesis advisor) / Garcia, Margret (Committee member) / Merrigan, Kathleen (Committee member) / Arizona State University (Publisher)
Created2022
Description
In the United States, some 94 million people (29% of the US population) live in areas immediately adjacent to a coast. The global phenomenon of climate-induced environmental change is largely framed as a one-way cause-and-effect relationship, where individuals, communities, and populations inhabiting at-risk locations are either forced to relocate or do so of their own accord. Yet residents of such at-risk areas are increasingly actively choosing to remain, even as risk intensifies. Using a mixed-methods approach, this dissertation examines environmental perceptions, the internalization of risk, the influence of information sources, and how individuals residing in coastal locations process their migration decisions. Established migration and hazard frameworks and theory are poorly positioned to understand the environments’ role in migration decisions. From these perspectives, environmental factors are near exclusively framed as negative affective biophysical push factors. Migration frameworks also fail to adequately incorporate reasons for non-migration. This dissertation directly addresses both these gaps in understanding. This research utilizes data from across the Gulf Coast, with a focus on fieldwork from Terrebonne Parish, Louisiana, and a dataset of 123 surveys and 63 interviews across a diverse group of coastal residents. Residents perceive of their environment in much more robust terms than just the biophysical. A majority of terms incorporated social and cultural aspects of environment, and environmental meaning was expressed across a continuum of proximal (most important/close) to more distal (less important/distant) scales. Little support is found for the traditional idea that economic or natural-environmental factors are more influential in decisions to migrate away from ones’ home. In predicting migration intention, socially and environmentally derived variables improved migration model performance. This dissertation demonstrates that internalization of risk by coastal residents is not a straightforward relationship, but rather one mediated by; social-environmental factors, personal experience, sense of place, and trust, which in turn influences intention to migrate, move locally, or remain in place. Residents perceive of their environment far more broadly than current risk-management planning allows. Results provide coastal residents, as well as community leaders and emergency managers who perceive environment differently, new tools for productive engagement and future policy development within coastal landscapes.
ContributorsTill, Charlotte Emma (Author) / BurnSilver, Shauna (Thesis advisor) / Tsuda, Takeyuki (Committee member) / White, Dave (Committee member) / Arizona State University (Publisher)
Created2022
Description
Interdigitated back contact (IBC) solar cells have achieved the highest single junction silicon wafer-based solar cell power conversion efficiencies reported to date. This thesis is about the fabrication of a high-efficiency silicon heterojunction IBC solar cell for potential use as the bottom cell for a 3-terminal lattice-matched dilute-nitride Ga (In)NP(As)/Si monolithic tandem solar cell. An effective fabrication process has been developed and the process challenges related to open circuit voltage (Voc), series resistance (Rs), and fill factor (FF) are experimentally analyzed. While wet etching, the sample lost the initial passivation, and by changing the etchant solution and passivation process, the voltage at maximum power recovered to an initial value of over 710 mV before metallization. The factors reducing the series resistance loss in IBC cells were also studied. One of these factors was the Indium Tin Oxide (ITO) sputtering parameters, which impact the conductivity of the ITO layer and transport across the a-Si:H/ITO interface. For the standard recipe, the chamber pressure was 3.5 mTorr with no oxygen partial pressure, and the thickness of the ITO layer in contact with the a-Si:H layers, was optimized to 150 nm. The patterning method for the metal contacts and final annealing also change the contact resistance of the base and emitter stack layers. The final annealing step is necessary to recover the sputtering damage; however, the higher the annealing time the higher the final IBC series resistance. The best efficiency achieved was 19.3% (Jsc = 37 mA/cm2, Voc = 691 mV, FF = 71.7%) on 200 µm thick 1-15 Ω-cm n-type CZ C-Si with a designated area of 4 cm2.
ContributorsMoeini Rizi, Mansoure (Author) / Goodnick, Stephen (Thesis advisor) / Honsberg, Christina (Committee member) / Goryll, Michael (Committee member) / Smith, David (Committee member) / Bowden, Stuart (Committee member) / Arizona State University (Publisher)
Created2022