Matching Items (9)
Description
Hydrogenases catalyze the interconversion of protons, electrons, and hydrogen according to the reaction: 2H+ + 2e- <-> H2 while using only earth abundant metals, namely nickel and iron for catalysis. The enzymatic turnover of Clostridium acetobutylicum [FeFe]-hydrogenase has been investigated through the use of electrochemical and scanning probe techniques. Scanning tunneling microscopy (STM) imaging revealed sub-monolayer surface coverage. Cyclic voltammetry yielded a catalytic, cathodic hydrogen production signal similar to that observed for a platinum electrode. From the direct observation of single enzymes and the macroscopic electrochemical measurements obtained from the same electrode, the apparent turnover frequency (TOF) per single enzyme molecule as a function of potential was determined. The TOF at 0.7 V vs. Ag/AgCl for the four SAMs yielded a decay constant for electronic coupling (β) through the SAM of ~ 0.82 Å -1, in excellent agreement with published values for similar SAMs. One mechanism used by plants to protect against damage is called nonphotochemical quenching (NPQ). Triggered by low pH in the thylakoid lumen, NPQ leads to conversion of excess excitation energy in the antenna system to heat before it can initiate production of harmful chemical species by photosynthetic reaction centers. Here a synthetic hexad molecule that functionally mimics the role of the antenna in NPQ is described. When the hexad is dissolved in an organic solvent, five zinc porphyrin antenna moieties absorb light, exchange excitation energy, and ultimately decay by normal photophysical processes. However, when acid is added, a pH-sensitive dye moiety is converted to a form that rapidly quenches the first excited singlet states of all five porphyrins, converting the excitation energy to heat and rendering the porphyrins kinetically incompetent to perform useful photochemistry. Charge transport was also studied in single-molecule junctions formed with a 1,7-pyrrolidine-substituted 3,4,9,10-Perylenetetracarboxylic diimide (PTCDI) molecule. A reduction in the highest occupied (HOMO) and lowest unoccupied (LUMO) molecular orbitals energy gap due to the electronic properties of the substituents is seen when compared to an unsubstituted-PTCDI. The small HOMO-LUMO energy gap allows for switching between electron- and hole-dominated charge transport with a gate voltage, thus demonstrating a single-molecule ambipolar field effect transistor.
ContributorsMadden, Christopher (Author) / Moore, Thomas A. (Thesis advisor) / Jones, Anne (Committee member) / Tao, Nongjian (Committee member) / Arizona State University (Publisher)
Created2012
Description
The sun provides Earth with a virtually limitless source of energy capable of sustaining all of humanity's needs. Photosynthetic organisms have exploited this energy for eons. However, efficiently converting solar radiation into a readily available and easily transportable form is complex. New materials with optimized physical, electrochemical, and photophysical properties are at the forefront of organic solar energy conversion research. In the work presented herein, porphyrin and organometallic dyes with widely-varied properties were studied for solar energy applications. In one project, porphyrins and porphyrin-fullerene dyads with aniline-like features were polymerized via electrochemical methods into semiconductive thin films. These were shown to have high visible light absorption and stable physical and electrochemical properties. However, experimentation using porphyrin polymer films as both the light absorber and semiconductor in a photoelectrochemical cell showed relatively low efficiency of converting absorbed solar energy into electricity. In separate work, tetra-aryl porphyrin derivatives were examined in conjunction with wide-bandgap semiconductive oxides TiO2 and SnO2. Carboxylic acid-, phosphonic acid-, and silatrane-functionalized porphyrins were obtained or synthesized for attachment to the metal oxide species. Electrochemical, photophysical, photoelectrochemical, and surface stability studies of the porphyrins were performed for comparative purposes. The order of surface linkage stability on TiO2 in alkaline conditions, from most stable to least, was determined to be siloxane > phosphonate > carboxylate. Finally, porphyrin dimers fused via their meso and beta positions were synthesized using a chemical oxidative synthesis with a copper(II) oxidant. The molecules exhibit strong absorption in the visible and near-infrared spectral regions as well as interesting electrochemical properties suggesting possible applications in light harvesting and redox catalysis.
ContributorsBrennan, Bradley J (Author) / Gust, Devens (Thesis advisor) / Moore, Thomas A. (Committee member) / Allen, James P. (Committee member) / Arizona State University (Publisher)
Created2012
Description
The photosynthetic reaction center is a type of pigment-protein complex found widely in photosynthetic bacteria, algae and higher plants. Its function is to convert the energy of sunlight into a chemical form that can be used to support other life processes. The high efficiency and structural simplicity make the bacterial reaction center a paradigm for studying electron transfer in biomolecules. This thesis starts with a comparison of the primary electron transfer process in the reaction centers from the Rhodobacter shperoides bacterium and those from its thermophilic homolog, Chloroflexus aurantiacus. Different temperature dependences in the primary electron transfer were found in these two type of reaction centers. Analyses of the structural differences between these two proteins suggested that the excess surface charged amino acids as well as a larger solvent exposure area in the Chloroflexus aurantiacus reaction center could explain the different temperature depenence. The conclusion from this work is that the electrostatic interaction potentially has a major effect on the electron transfer. Inspired by these results, a single point mutant was designed for Rhodobacter shperoides reaction centers by placing an ionizable amino acid in the protein interior to perturb the dielectrics. The ionizable group in the mutation site largely deprotonated in the ground state judging from the cofactor absorption spectra as a function of pH. By contrast, a fast charge recombination assoicated with protein dielectric relaxation was observed in this mutant, suggesting the possibility that dynamic protonation/deprotonation may be taking place during the electron transfer. The fast protein dielectric relaxation occuring in this mutant complicates the electron transfer pathway and reduces the yield of electron transfer to QA. Considering the importance of the protein dielectric environment, efforts have been made in quantifying variations of the internal field during charge separation. An analysis protocol based on the Stark effect of reaction center cofactor spectra during charge separation has been developed to characterize the charge-separated radical field acting on probe chromophores. The field change, monitored by the dynamic Stark shift, correlates with, but is not identical to, the electron transfer kinetics. The dynamic Stark shift results have lead to a dynamic model for the time-dependent dielectric that is complementary to the static dielectric asymmetry observed in past steady state experiments. Taken together, the work in this thesis emphasizes the importance of protein electrostatics and its dielectric response to electron transfer.
ContributorsGuo, Zhi (Author) / Woodbury, Neal W (Thesis advisor) / Lindsay, Stuart M (Committee member) / Ross, Robert (Committee member) / Ozkan, Banu S (Committee member) / Moore, Thomas A. (Committee member) / Arizona State University (Publisher)
Created2012
Description
The molecular modification of semiconductors has applications in energy
conversion and storage, including artificial photosynthesis. In nature, the active sites of
enzymes are typically earth-abundant metal centers and the protein provides a unique
three-dimensional environment for effecting catalytic transformations. Inspired by this
biological architecture, a synthetic methodology using surface-grafted polymers with
discrete chemical recognition sites for assembling human-engineered catalysts in three-dimensional
environments is presented. The use of polymeric coatings to interface cobalt-containing
catalysts with semiconductors for solar fuel production is introduced in
Chapter 1. The following three chapters demonstrate the versatility of this modular
approach to interface cobalt-containing catalysts with semiconductors for solar fuel
production. The catalyst-containing coatings are characterized through a suite of
spectroscopic techniques, including ellipsometry, grazing angle attenuated total reflection
Fourier transform infrared spectroscopy (GATR-FTIR) and x-ray photoelectron (XP)
spectroscopy. It is demonstrated that the polymeric interface can be varied to control the
surface chemistry and photoelectrochemical response of gallium phosphide (GaP) (100)
electrodes by using thin-film coatings comprising surface-immobilized pyridyl or
imidazole ligands to coordinate cobaloximes, known catalysts for hydrogen evolution.
The polymer grafting chemistry and subsequent cobaloxime attachment is applicable to
both the (111)A and (111)B crystal face of the gallium phosphide (GaP) semiconductor,
providing insights into the surface connectivity of the hard/soft matter interface and
demonstrating the applicability of the UV-induced immobilization of vinyl monomers to
a range of GaP crystal indices. Finally, thin-film polypyridine surface coatings provide a
molecular interface to assemble cobalt porphyrin catalysts for hydrogen evolution onto
GaP. In all constructs, photoelectrochemical measurements confirm the hybrid
photocathode uses solar energy to power reductive fuel-forming transformations in
aqueous solutions without the use of organic acids, sacrificial chemical reductants, or
electrochemical forward biasing.
conversion and storage, including artificial photosynthesis. In nature, the active sites of
enzymes are typically earth-abundant metal centers and the protein provides a unique
three-dimensional environment for effecting catalytic transformations. Inspired by this
biological architecture, a synthetic methodology using surface-grafted polymers with
discrete chemical recognition sites for assembling human-engineered catalysts in three-dimensional
environments is presented. The use of polymeric coatings to interface cobalt-containing
catalysts with semiconductors for solar fuel production is introduced in
Chapter 1. The following three chapters demonstrate the versatility of this modular
approach to interface cobalt-containing catalysts with semiconductors for solar fuel
production. The catalyst-containing coatings are characterized through a suite of
spectroscopic techniques, including ellipsometry, grazing angle attenuated total reflection
Fourier transform infrared spectroscopy (GATR-FTIR) and x-ray photoelectron (XP)
spectroscopy. It is demonstrated that the polymeric interface can be varied to control the
surface chemistry and photoelectrochemical response of gallium phosphide (GaP) (100)
electrodes by using thin-film coatings comprising surface-immobilized pyridyl or
imidazole ligands to coordinate cobaloximes, known catalysts for hydrogen evolution.
The polymer grafting chemistry and subsequent cobaloxime attachment is applicable to
both the (111)A and (111)B crystal face of the gallium phosphide (GaP) semiconductor,
providing insights into the surface connectivity of the hard/soft matter interface and
demonstrating the applicability of the UV-induced immobilization of vinyl monomers to
a range of GaP crystal indices. Finally, thin-film polypyridine surface coatings provide a
molecular interface to assemble cobalt porphyrin catalysts for hydrogen evolution onto
GaP. In all constructs, photoelectrochemical measurements confirm the hybrid
photocathode uses solar energy to power reductive fuel-forming transformations in
aqueous solutions without the use of organic acids, sacrificial chemical reductants, or
electrochemical forward biasing.
ContributorsBeiler, Anna Mary (Author) / Moore, Gary F. (Thesis advisor) / Moore, Thomas A. (Thesis advisor) / Redding, Kevin E. (Committee member) / Allen, James P. (Committee member) / Arizona State University (Publisher)
Created2018
Description
The conversion of water to hydrogen and of carbon dioxide to industrially relevant chemical precursors are examples of reactions that can be used to store renewable energy as fuels or chemical building blocks for creating sustainable chemical manufacturing cycles. Unfortunately, current industrial catalysts for these transformations are reliant on relatively expensive and/or rare materials, such as platinum in the case of hydrogen generation, or lack selectivity towards producing a desired chemical product. Such drawbacks prevent global-scale applications. Although replacing such catalysts with more efficient and earth-abundant catalysts could improve this situation, the fundamental science required for this is lacking. In the first part of this dissertation, the synthesis and characterization of a novel binuclear iron fused porphyrin designed to break traditional scaling relationships in electrocatalysis is presented. Key features of the fused porphyrin include: 1) bimetallic sites, 2) a π-extended ligand that delocalizes electrons across the multimetallic scaffold, and 3) the ability to store up to six reducing equivalents. In the second part of this thesis, the electrochemical characterization of benzimidazole-phenols as “proton wires” is described. These bioinspired assemblies model the tyrosine-histidine pair of photosystem II, which serves as a redox mediator between the light-harvesting reaction center P680 and the oxygen evolution complex that enables production of molecular oxygen from water in cyanobacteria, algae, and higher plants. Results show that as the length of the hydrogen-bond network increases across a series of benzimidazole-phenols, the midpoint potential of the phenoxyl/phenol redox couple becomes less oxidizing. However, benzimidazole-phenols containing electron-withdrawing trifluoromethyl substituents enable access to potentials that are thermodynamically sufficient for oxidative processes relevant to artificial photosynthesis, including the oxidation of water, while translocating protons over ~11 Å.
ContributorsReyes Cruz, Edgar Alejandro (Author) / Moore, Gary F (Thesis advisor) / Trovitch, Ryan J (Committee member) / Sayres, Scott G (Committee member) / Arizona State University (Publisher)
Created2023
Description
Chemical modification of (semi)conducting surfaces with soft-material coatings containing electrocatalysts provides a strategy for developing integrated constructs that capture, convert, and store solar energy as fuels. However, a lack of effective strategies for interfacing electrocatalysts with solid-state materials, and an incomplete understanding of performance limiting factors, inhibit further development. In this work, chemical modification of a nanostructured transparent conductive oxide, and the III-V semiconductor, gallium phosphide, is achieved by applying a thin-film polymer coating containing appropriate functional groups to direct, template, and assemble molecular cobalt catalysts for activating fuel-forming reactions. The heterogeneous-homogeneous conducting assemblies enable comparisons of the structural and electrochemical properties of these materials with their homogeneous electrocatalytic counterparts. For these hybrid constructs, rational design of the local soft-material environment yields a nearly one-volt span in the redox chemistry of the cobalt metal centers. Further, assessment of the interplay between light absorption, charge transfer, and catalytic activity in studies involving molecular-catalyst-modified semiconductors affords models to describe the rates of photoelectrosynthetic fuel production as a function of the steady-state concentration of catalysts present in their activated form. These models provide a conceptual framework for extracting kinetic and thermodynamic benchmarking parameters. Finally, investigation of molecular ‘proton wires’ inspired by the Tyrosine Z-Histidine 190 redox pair in Photosystem II, provides insight into fundamental principles governing proton-coupled electron transfer, a process essential to all fuel-forming reactions relevant to solar fuel generation.
ContributorsWadsworth, Brian Lawrence (Author) / Moore, Gary F (Thesis advisor) / Moore, Thomas A. (Committee member) / Trovitch, Ryan J (Committee member) / Arizona State University (Publisher)
Created2020
Description
Liquid-phase exfoliation (LPE) is a straightforward and scalable method of producing two-dimensional nanomaterials. The LPE process has typical been applied to layered van der Waals (vdW) solids, such as graphite and transition metal dichalcogenides, which have layers held together by weak van der Waals interactions. However, recent research has shown that solids with stronger bonds and non-layered structures can be converted to solution-stabilized nanosheets via LPE, some of which have shown to have interesting optical, magnetic, and photocatalytic properties. In this work, two classes of non-vdW solids – hexagonal metal diborides and boron carbide – are investigated for their morphological features, their chemical and crystallographic compositions, and their solvent preference for exfoliation. Spectroscopic and microscopic techniques are used to verify the composition and crystal structure of metal diboride nanosheets. Their application as mechanical fillers is demonstrated by incorporation into polymer nanocomposite films of polyvinyl alcohol and by successful integration into liquid photocurable 3D printing resins. Application of Hansen solubility theory to two metal diboride compositions enables extrapolation of their affinities for certain solvents and is also used to find solvent blends suitable for the nanosheets. Boron carbide nanosheets are examined for their size and thickness and their exfoliation planes are computationally analyzed and experimentally investigated using high-resolution transmission electron microscopy. The resulting analyses indicate that the exfoliation of boron carbide leads to multiple observed exfoliation planes upon LPE processing. Overall, these studies provide insight into the production and applications of LPE-produced nanosheets derived from non-vdW solids and suggest their potential application as mechanical fillers in polymer nanocomposites.
ContributorsGilliam, Matthew Scott (Author) / Green, Alexander A (Thesis advisor) / Wang, Qing Hua (Committee member) / Moore, Gary F (Committee member) / Arizona State University (Publisher)
Created2020
Description
Hydrogenase enzymes capable of catalyzing proton reduction to produce H2 have generated a considerable interest due to increasing motivation in finding sustainable carbon free energy sources. A considerable amount of research has been focused on producing synthetic structures mimicking the hydrogenase catalytic site, but the activity seen in hydrogenase enzymes in aqueous near neutral pH has yet to be replicated. It is now clear that the protein structure surrounding the H-cluster enables the high activity by fine tuning characteristics of the catalyst, but the structure and complexity of hydrogenase enzymes makes it difficult to predict exactly how the secondary coordination sphere affects catalysis. This work looks at incorporating both synthetic molecular catalysts and hydrogenase mimics into peptide scaffolds to improve the activity for photo-driven H2 production in aqueous solutions. The first chapter of this dissertation shows a de novo heme binding peptide improving the activity of cobalt protoporphyrin IX (CoPPIX) upon coordination inside a four-helix bundle. The peptide bound CoPPIX exhibited a 5.5-fold increase in anaerobic and an 8.3-fold increase in aerobic activity compared to free CoPPIX, while also showing dramatic increases to stability and solubility. In the second chapter, this work is expanded by using a randomly mutated cytochrome b562 library to identify beneficial attributes for downstream implementation of an ideal coordination site. A high-throughput assay was developed to measure H2 production using WO3/Pd deposited on a glass plate for a colorimetric first-pass screen. This assay successfully measured H2 production from CoPPIX bound cytochrome b562 in the periplasm of cells and identified a possible mutant showing 70% more H2 production compared to the wildtype. The third chapter incorporated a hydrogenase mimic into a four-helix bundle using a semi-synthetic strategy yielding a 3-fold increase in activity due to catalyst encapsulation. The method created will allow for easy modifications to the synthetic catalyst or peptide sequence in future work. The systems developed in this work were designed to facilitate the identification and implementation of beneficial characteristics for future development of an optimal secondary coordination sphere for a peptide bound molecular catalyst.
ContributorsHalloran, Nicholas Ryan (Author) / Ghirlanda, Giovanna (Thesis advisor) / Mills, Jeremy H (Committee member) / Moore, Gary F (Committee member) / Arizona State University (Publisher)
Created2021
Description
In Photosystem II of plants, the proton motive force that is essential for life is generated partly by the water oxidation process where the tyrosine and histidine 190 (hydrogen bonded) amino acids play an important role. The proton-coupled electron transfer (PCET) process involving these two molecules has been replicated using a benzimidazole-phenol (BIP) construct as an artificial model of both the intramolecular hydrogen bond interaction and the associated PCET process. BIP is a nearly planar molecule and features a strong intramolecular hydrogen bond between the phenol and the nitrogen of the benzimidazole. When the molecule is oxidized electrochemically, the phenolic proton is transferred to the nitrogen of the benzimidazole moiety in a PCET mechanism. Herein the design, synthesis, and physicochemical characterization of a new BIP derivative is described. By introducing a methyl group in the new design, we intentionally increase the dihedral angle between the benzimidazole and phenol rings. The presence of the methyl group affects the ground-state PCET and the excited-state intramolecular proton transfer processes as well. The break in the coplanarity weakens the strength of the intramolecular hydrogen bond, decreases the chemical reversibility, and quenches the emission from the excited-state intramolecular proton transfer state. The findings contribute to understanding the importance of having a nearly planar structure in bioinspired artificial photosynthetic systems.
ContributorsDipaola, Lydia (Author) / Moore, Ana (Thesis director) / Odella, Emmanuel (Thesis director) / Moore, Thomas A. (Committee member) / Barrett, The Honors College (Contributor) / School of Human Evolution & Social Change (Contributor) / School of Life Sciences (Contributor)
Created2021-12