Matching Items (872)
Filtering by
Description
HgCdTe is the dominant material currently in use for infrared (IR) focal-plane-array (FPA) technology. In this dissertation, transmission electron microscopy (TEM) was used for the characterization of epitaxial HgCdTe epilayers and HgCdTe-based devices. The microstructure of CdTe surface passivation layers deposited either by hot-wall epitaxy (HWE) or molecular beam epitaxy (MBE) on HgCdTe heterostructures was evaluated. The as-deposited CdTe passivation layers were polycrystalline and columnar. The CdTe grains were larger and more irregular when deposited by HWE, whereas those deposited by MBE were generally well-textured with mostly vertical grain boundaries. Observations and measurements using several TEM techniques showed that the CdTe/HgCdTe interface became considerably more abrupt after annealing, and the crystallinity of the CdTe layer was also improved. The microstructure and compositional profiles of CdTe(211)B/ZnTe/Si(211) heterostructures grown by MBE was investigated. Many inclined {111}-type stacking faults were present throughout the thin ZnTe layer, terminating near the point of initiation of CdTe growth. A rotation angle of about 3.5° was observed between lattice planes of the Si substrate and the final CdTe epilayer. Lattice parameter measurement and elemental profiles indicated that some local intermixing of Zn and Cd had taken place. The average widths of the ZnTe layer and the (Cd, Zn)Te transition region were found to be roughly 6.5 nm and 3.5 nm, respectively. Initial observations of CdTe(211)B/GaAs(211) heterostructures indicated much reduced defect densities near the vicinity of the substrate and within the CdTe epilayers. HgCdTe epilayers grown on CdTe(211)B/GaAs(211) composite substrate were generally of high quality, despite the presence of precipitates at the HgCdTe/CdTe interface. The microstructure of HgCdSe thin films grown by MBE on ZnTe/Si(112) and GaSb(112) substrates were investigated. The quality of the HgCdSe growth was dependent on the growth temperature and materials flux, independent of the substrate. The materials grown at 100°C were generally of high quality, while those grown at 140°C had {111}-type stacking defects and high dislocation densities. For epitaxial growth of HgCdSe on GaSb substrates, better preparation of the GaSb buffer layer will be essential in order to ensure that high-quality HgCdSe can be grown.
ContributorsZhao, Wenfeng (Author) / Smith, David J. (Thesis advisor) / McCartney, Martha (Committee member) / Carpenter, Ray (Committee member) / Bennett, Peter (Committee member) / Treacy, Michael J. (Committee member) / Arizona State University (Publisher)
Created2011
Description
The issue of adolescent dating violence is a relatively new field of research, but several studies have shown that adolescent dating violence is distinct from adult domestic violence and has its own implications and patterns. Many studies have shown that both males and females appear to be the victims and perpetrators of dating violence, and often times in abusive dating relationships, the perpetration is mutual. Involvement with adolescent dating violence has serious physical and psychological health consequences, and in order to combat this social phenomenon, effective prevention programs are needed. The present study discusses key characteristics of school-based prevention programs that have been shown to be effective, as well as looks specifically at one such prevention program called BLOOM for Healthy Relationships™. The researcher in this study originally set out to conduct a program evaluation of BLOOM, but encountered several obstacles with the approval process that prevented the evaluation from being completed in the available time frame. This report is now framed as a case study that will discuss the necessary resources for preparing to conduct a program evaluation, describe the obstacles encountered in the approval process and make suggestions for future strategies to complete program evaluations of BLOOM.
ContributorsKellums, Megan Marie (Author) / Updegraff, Kimberly (Thesis director) / Dumka, Larry (Committee member) / Barrett, The Honors College (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Department of Psychology (Contributor)
Created2014-05
Description
Large, violent storms come through the Phoenix area during monsoon season, and currently, the best ways to predict them are not very accurate. The primary goal of this investigation is to see if a mechanism can be developed for the prediction of these storms in Phoenix during monsoon season. In order to answer this question, two data sets (a remote sensing satellite imagery and a ground-based weather information set) will be used and their measurements will be compared against one another using a corresponding time as the related variable. The goal is to try and identify some type of correlation or explanation of correlation. Events known as moisture surges (from the gulf surge \u2014 which comes from the California Gulf) will be identified and then compared in some detail. These chutes of moisture surge through Arizona, primarily up through Yuma in a northeasterly direction. The point of the investigation is to prove or disprove that satellite imagery can be used as an analog for dew point measurements in areas where ground measurements are not available. If this can be demonstrated, then, because of the high temporal resolution of the remote sensing data, satellite imagery could be used as an identifier of oncoming storms.
ContributorsCarter, Shaylina Rae (Author) / Christensen, Phil (Thesis director) / Cerveny, Randall (Committee member) / Hagee, Warren (Committee member) / Barrett, The Honors College (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / School of Earth and Space Exploration (Contributor)
Created2013-05
Description
The purpose of our study was to examine the effectiveness of a cycling intervention on body composition in adolescents with Down syndrome (DS). Participants completed one of three interventions over eight consecutive weeks. The interventions were: 1) Voluntary Cycling (VC), in which participants cycled at their self-selected pedaling rate 2) Assisted Cycling (AC), in which the participants' voluntary pedaling rates were assisted with a motor to ensure the maintenance of 80 rpms. 3) No cycling (NC), in which the participants acted as controls. Participants in the AC intervention did not decrease body fat or increase lean body mass however they did maintain these measures during the intervention as compared to the VC and NO participants who increased body fat and decreased lean body mass. These statistics were not exactly as expected nor were they statistically significant. Future research will try to replicate this data with statistically significant values for more cycling adolescents with DS using more randomized intervention groups.
ContributorsBennett, Kristen Leigh (Author) / Ringenbach, Shannon (Thesis director) / Brown, Steven (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor)
Created2015-05
Description
This research study examined the effects of assisted cycling using a stationary recumbent bicycle that had an internal motor to help participants pedal at a desired cadence. The participants were either placed in an Assisted Cycling (AC), Voluntary Cycling (VC), or No Cycling (NC) intervention group. Those placed in the AC of VC groups then came to a laboratory setting 3 days a week for 8 weeks to cycle for 30 minutes. This research specifically analyzes the Vineland Adaptive Behavior Scale II to analyze the changes in daily living skills and maladaptive behaviors pre and post the exercise intervention. After analyzing the VABS II scores it was found that those in the VC intervention had statistically significant improvements in maladaptive behaviors. An interpretation of this finding is that the VC intervention had an increased heart rate over the span of the intervention and had a larger power output than those in the AC group. A limitation of this research is that it was a self-reported questionnaire that was given to the caregivers of the participant. The caregivers were not always controlled for, so in some cases two different caregivers were given the questionnaire for a single participant. A suggestion for future research would be to use the participant's mental age versus their chronological age when using the VABS-II and to use the Adaptive Behaviors Assessment System III (ABAS-III).
ContributorsJenkins, Cayla Marie (Author) / Ringenbach, Shannon (Thesis director) / Kulinna, Pamela (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor)
Created2015-05
Description
This paper is an exploration of numerical optimization as it applies to the consumer choice problem. Suggested algorithms are intended to compute solutions to the Marshallian problem, and some can extend to the dual given the suggested modifications. Each method seeks to either weaken the sufficient conditions for optimization, converge to a solution more efficiently, or describe additional properties of the decision space. The purpose of this paper is to explore constrained quasiconvex programming in a less complicated environment by design of Marshallian constraints.
ContributorsKnipp, Charles (Author) / Reffett, Kevin (Thesis director) / Leiva-Bertran, Fernando (Committee member) / Department of Economics (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
The research described in this dissertation has involved the use of transmission electron microcopy (TEM) to characterize the structural properties of II-VI and III-V compound semiconductor heterostructures and superlattices. The microstructure of thick ZnTe epilayers (~2.4 µm) grown by molecular beam epitaxy (MBE) under virtually identical conditions on GaSb, InAs, InP and GaAs (100) substrates were compared using TEM. High-resolution electron micrographs revealed a highly coherent interface for the ZnTe/GaSb sample, and showed extensive areas with well-separated interfacial misfit dislocations for the ZnTe/InAs sample. Lomer edge dislocations and 60o dislocations were commonly observed at the interfaces of the ZnTe/InP and ZnTe/GaAs samples. The amount of residual strain at the interfaces was estimated to be 0.01% for the ZnTe/InP sample and -0.09% for the ZnTe/GaAs sample. Strong PL spectra for all ZnTe samples were observed from 80 to 300 K. High quality GaSb grown by MBE on ZnTe/GaSb (001) virtual substrates with a temperature ramp at the beginning of the GaSb growth has been demonstrated. High-resolution X-ray diffraction (XRD) showed clear Pendellösung thickness fringes from both GaSb and ZnTe epilayers. Cross-section TEM images showed excellent crystallinity and smooth morphology for both ZnTe/GaSb and GaSb/ZnTe interfaces. Plan-view TEM image revealed the presence of Lomer dislocations at the interfaces and threading dislocations in the top GaSb layer. The defect density was estimated to be ~1 x107/cm2. The PL spectra showed improved optical properties when using the GaSb transition layer grown on ZnTe with a temperature ramp. The structural properties of strain-balanced InAs/InAs1-xSbx SLs grown on GaSb (001) substrates by metalorganic chemical vapor deposition (MOCVD) and MBE, have been studied using XRD and TEM. Excellent structural quality of the InAs/InAs1-xSbx SLs grown by MOCVD has been demonstrated. Well-defined ordered-alloy structures within individual InAs1-xSbx layers were observed for samples grown by modulated MBE. However, the ordering disappeared when defects propagating through the SL layers appeared during growth. For samples grown by conventional MBE, high-resolution images revealed that interfaces for InAs1-xSbx grown on InAs layers were sharper than for InAs grown on InAs1-xSbx layers, most likely due to a Sb surfactant segregation effect.
ContributorsOuyang, Lu (Author) / Smith, David J. (Thesis advisor) / McCartney, Martha (Committee member) / Ponce, Fernando (Committee member) / Chamberlin, Ralph (Committee member) / Menéndez, Jose (Committee member) / Arizona State University (Publisher)
Created2012
Description
Soft magnetic alloys play a significant role for magnetic recording applications and highly sensitivity magnetic field sensors. In order to sustain the magnetic areal density growth, development of new synthesis techniques and materials is necessary. In this work, the effect of oxygen incorporation during electrodeposition of CoFe alloys on magnetic properties, magnetoresistance and structural properties has been studied. Understanding the magnetic properties often required knowledge of oxygen distribution and structural properties of the grown films. Transmission electron microscopy (TEM) was a powerful tool in this study to correlate the oxygen-distribution nanostructure to the magnetic properties of deposited films. Off-axis electron holography in TEM was used to measure magnetic domain wall width in the deposited films. Elemental depth profiles of Fe, Co, O were investigated by secondary ion mass spectroscopy (SIMS). Magnetic properties have been determined by superconducting quantum interference device (SQUID) measurements. Oxygen content in the CoFe deposited films was controlled by electrolyte composition. Films were deposited on Si 100 substrates and on other substrates such as Cu and Al. However, a good film quality was achieved on Si substrate. Electron energy loss and x-ray spectroscopies showed that the low oxygen films contained intragranular Fe2+ oxide (FeO) particles and that the high oxygen films contained intergranular Fe3+ (Fe2O3) along grain boundaries. The films with oxide present at the grain boundary had significantly increased coercivity, magnetoresistance and reduced saturation magnetization relative to the lower oxygen content films with intragranular oxide. The differences in magnetic properties between low oxygen and high oxygen concentration films were attributed to stronger mobile domain wall interactions with the grain boundary oxide layers. The very high magnetoresistance values were achieved for magnetic devices with nanocontact dimension < 100 nm and oxide incorporation in this nanoconfined geometry. The content of oxide phase in nanocontact was controlled by concentration of the Fe3+ ions in the electrodeposition solution. Magnetic device integrity was improved by varying amount of additive into plating solution. These results indicated that electrodeposited CoFe nanocontact is a novel class of materials with large application for magnetic field sensors.
ContributorsElhalawaty, Shereen (Author) / Carpenter, Ray (Thesis advisor) / Chamberlin, Ralph (Committee member) / McCartney, Martha (Committee member) / Alford, Terry (Committee member) / Arizona State University (Publisher)
Created2012
Description
A system for illuminating a sample in situ with visible and UV light inside a transmission electron microscope was devised to study photocatalysts. There are many factors which must be considered when designing and building such a system. These include both mechanical, optical, and electron optical considerations. Some of the restrictions posed by the electron microscope column are significant, and care must be taken not to degrade the microscope's electron optical performance, or to unduly restrict the other current capabilities of the microscope. The nature of these various design considerations is discussed in detail. A description of the system that has been added to the microscope at ASU, an FEI Tecnai F20 environmental transmission electron microscope is also given. The system includes a high brightness broadband light source with optical filters, a fiber to guide the light to the sample, and a system for precisely aligning the fiber tip. The spatial distribution and spectrum of the light reaching the sample has been characterized, and is described in detail.
ContributorsMiller, Benjamin (Author) / Crozier, Peter A. (Thesis advisor) / McCartney, Martha (Committee member) / Rez, Peter (Committee member) / Arizona State University (Publisher)
Created2012
Description
Sanctuary jurisdictions are jurisdictions that do not enforce one or more aspects of federal immigration policy in regards to unauthorized immigrants. Some states maintain state-wide sanctuary policies while others are adamantly against them. Estimates of taxes that unauthorized immigrants pay and estimates of the amount of state funding that unauthorized immigrants can access (education, financial aid, corrections, and welfare) reveal that regardless of sanctuary status, unauthorized immigrants may “pay in” more than they “take out” from the system. The status of “sanctuary jurisdiction” does not appear to have much if any effect on the net state budget. However, unauthorized immigrants are able to access more welfare programs in sanctuary states.
ContributorsLattus, Anna Olivia (Author) / Herrendorf, Berthold (Thesis director) / Hobijn, Bart (Committee member) / School of Mathematical and Statistical Sciences (Contributor) / Economics Program in CLAS (Contributor) / School of International Letters and Cultures (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05