Matching Items (5)
Filtering by
Description
This project details the learning of processes in nanofabrication and sensor detection fields. We sought to apply this knowledge to develop a processing procedure to fabricate sensors used to detect high energy protons. We seek to create such a sensor to be applied to aid Mayo Clinic’s Proton Beam Therapy center for cancer treatment through providing beam detection measurements. Developed plans would allow for proton beam detectors to be able to measure beam intensity and direction which would allow for more accurate beam treatments. Current detectors require much calibration and solid state detectors can’t withstand the high-energy exposure of the proton beam for long durations. By fabricating pixelated diamond sensors we expect to produce sensitive beam readings, while extending detector length time due to diamonds durable crystalline lattice. We report processing procedures for simple 2-3 contact detectors as well as more complex multi-contact pixelated sensors used for spatial resolution of the beam. Testing of simple sensors is additionally reported with successful radioactive source detection.
ContributorsVan Engelhoven, Trevor James (Author) / Nemanich, Robert (Thesis director) / Zaniewski, Anna (Committee member) / Department of Physics (Contributor, Contributor) / School of Earth and Space Exploration (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
Integration of dielectrics with graphene is essential to the fulfillment of graphene based electronic applications. While many dielectric deposition techniques exist, plasma enhanced atomic layer deposition (PEALD) is emerging as a technique to deposit ultrathin dielectric films with superior densities and interfaces. However, the degree to which PEALD on graphene can be achieved without plasma-induced graphene deterioration is not well understood. In this work, we investigate a range of plasma conditions across a single sample, characterizing both oxide growth and graphene deterioration using spectroscopic analysis and atomic force microscopy. Investigation of graphene and film quality produced by these conditions yields insight into plasma effects. Using a specially designed sample configuration, we achieve ultrathin (< 1 nm) aluminum oxide films atop graphene.
ContributorsTrimble, Christie Jordan (Author) / Nemanich, Robert (Thesis director) / Zaniewski, Anna (Committee member) / Department of Physics (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
In this project, we aim to fabricate PIN structure-like diodes for radiation detectors using Boron Nitride (BN). This fabrication is done by performing lithography and metal deposition processes on a Cubic Boron Nitride (cBN) of around 200 nm in thickness layer on top of a boron doped diamond substrate. The main goal is to create the most efficient and affordable alpha particle—and ideally neutron—detector in a radiation setting. Thus, making more accessible radiation detectors that can be more easily produced and disposed of, as well as minimizing the size of conventional detectors.
ContributorsGutierrez, Eric (Author) / Nemanich, Robert (Thesis director) / Zaniewski, Anna (Committee member) / Barrett, The Honors College (Contributor) / Department of Physics (Contributor)
Created2023-05
Description
In this project we are analyzing the diamond-titanium interface as it applies to diamond-based diode devices, including alpha particle, proton, and neutron detectors. This is done through the fabrication of an O-terminated B-doped diamond sample with a 20 Å Ti / 10 Å Pt overlayer which was then annealed and examined via X-ray photoelectron spectroscopy (XPS). It was discovered that after annealing the sample at temperatures ranging from 400 C - 900 C that TiC was not formed at any point during this experiment. Possible reasons for this include a lack of sufficient titanium in order to form TiC and over oxygenating the diamond surface before the metal was deposited.
ContributorsJohnson, Holly (Author) / Zaniewski, Anna (Thesis director) / Nemanich, Robert (Committee member) / Department of Physics (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
This paper begins with an introduction to the topics relevant to the research presented. Properties of diamond, diamond’s ability to be used in power electronics compared to other semiconducting materials, and a brief overview of field effect transistors are among the topics discussed. The remainder of the paper centers around research that has been conducted on seven diamond samples. Interface characterization was performed on two diamond samples, one with a high boron incorporation epitaxial layer and another with a low boron incorporation epitaxial layer. UPS He I analysis and UPS He II analysis were used to construct band alignments for the two samples, which revealed no significant differences between their measured properties. A Python program designed to optimize XPS loss peak and UPS He II graphical data analysis is also discussed in detail. Next, Hall effect measurements are examined. Hall effect measurements were carried out on seven diamond samples, two of which have high boron incorporation epitaxial layers, two of which have low boron incorporation epitaxial layers, one of which has a moderate boron incorporation epitaxial layer, and two of which have a phosphorus-doped epitaxial layer. Hall measurements of the boron-doped samples revealed no significant differences in measured parameters amongst the samples with varying boron incorporation epitaxial layers, with the exception of an expected difference in measured carrier concentration proportional to the amount of dopant incorporation in the layers. Some samples with boron-doped epitaxial layers produced measurements indicating n-type charge carriers, which is unexpected given the p-type charge carriers within these samples. The phosphorus-doped samples were unable to be measured due to overly high resistance following an oxygen termination step, and this effect was functionally reversed following hydrogen termination of the samples. It is hypothesized that Fermi pinning is responsible for this effect. The paper concludes with a summary of data discussed in previous sections and a suggested direction for future research on this topic.
ContributorsJacobs, Madeleine (Author) / Nemanich, Robert (Thesis director) / Botana, Antia (Committee member) / Barrett, The Honors College (Contributor) / College of Integrative Sciences and Arts (Contributor)
Created2022-05