Matching Items (123)
Description
With renewable energy on the rise, researchers have turned their funding and their focus towards new solar cell technologies, and perovskites are a major source of interest. This class of materials is particularly interesting due to their quick, simple synthesis as well as their physical and electrical superiority when compared to current silicon-based solar cells. Through this thesis, we will explore the synthesis of various types of perovskites and their subsequent characterization, which includes optical microscopy, photoluminescence spectroscopy, Raman microscopy, and X-ray diffraction. Analyzing two different perovskites both before and after a two-week period of storage revealed that while synthesis is indeed experiment-friendly, these materials have a concerning lack of stability even in ideal conditions.
ContributorsBuzas, Benjamin Joseph (Author) / Tongay, Sefaattin (Thesis director) / Muhich, Christopher (Committee member) / Materials Science and Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
Heavy metals such as selenium can be especially important to limit because they can cause serious health problems even at relatively low concentrations. In an effort to selectively remove selenium from solution, a PAABA (poly(aniline-co-p-aminobenzoic acid) conductive copolymer was synthesized in a selenic acid solution, and its ability to remove selenium was studied. Analysis of the Raman spectra confirmed the hypothesized formation of PAABA polymer. Constant voltage cycles showed success in precipitating the selenium out of solution via electroreduction, and ICP-MS confirmed the reduction of selenium concentrated in solution. These results indicate the PAABA synthesized in selenic acid shows promise for selective water treatment.
ContributorsSulzman, Serita Lynne (Author) / Wang, Qing Hua (Thesis director) / Chan, Candace (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05
Description
The purpose of this project is to analyze the current state of cancer nanomedicine and its challenges. Cancer is the second most deadly illness in the United States after heart disease. Nanomedicine, the use of materials between 1 and 100 nm to for the purpose of addressing healthcare-related problems, is particularly suited for treating it since nanoparticles have properties such as high surface area-to-volume ratios and favorable drug release profiles that make them more suitable for tasks such as consistent drug delivery to tumor tissue. The questions posed are: What are the current nanomedical treatments for cancer? What are the technical, social, and legal challenges related to nanomedical treatments and how can they be overcome? To answer the questions mentioned above, information from several scientific papers on nanomedical treatments for cancer as well as from social science journals was synthesized. Based on the findings, nanomedicine has a wide range of applications for cancer drug delivery, detection, and immunotherapy. The main technical challenge related to nanomedical treatments is navigating through biological barriers such as the mononuclear phagocyte system, the kidney, the blood-brain barrier, and the tumor microenvironment. Current approaches to meeting this challenge include altering the size, shape, and charge of nanoparticles for easier passage. The main social and legal challenge related to nanomedical treatments is the difficulty of regulating them due to factors such as the near impossibility of detecting nanowaste. Current approaches to meeting this challenge include the use of techniques such as scanning tunneling microscopy and atomic force microscopy to help distinguish nanowaste from the surroundings. More research will have to be done in these and other areas to enhance a major cancer-fighting tool.
ContributorsAbraham, Alfred Francy (Author) / Brian, Jennifer (Thesis director) / Liu, Yan (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
Description
Titanium dioxide is an essential material under research for energy and environmental applications, chiefly through its photocatalytic properties. These properties allow it to be used for water-splitting, detoxification, and photovoltaics, in addition to its conventional uses in pigmentation and sunscreen. Titanium dioxide exists in several polymorphic structures, of which the most common are rutile and anatase. We focused on anatase for the purposes of this research, due to its promising results for hydrolysis.
Anatase exists often in its reduced form (TiO2-x), enabling it to perform redox reactions through the absorption and release of oxygen into/from the crystal lattice. These processes result in structural changes, induced by defects in the material, which can theoretically be observed using advanced characterization methods. In situ electron microscopy is one of such methods, and can provide a window into these structural changes. However, in order to interpret the structural evolution caused by defects in materials, it is often necessary and pertinent to use atomistic simulations to compare the experimental images with models.
In this thesis project, we modeled the defect structures in anatase, around oxygen vacancies and at surfaces, using molecular dynamics, benchmarked with density functional theory. Using a “reactive” forcefield designed for the simulation of interactions between anatase and water that can model and treat bonding through the use of bond orders, different vacancy structures were analyzed and simulated. To compare these theoretical, generated models with experimental data, the “multislice approach” to TEM image simulation was used. We investigated a series of different vacancy configurations and surfaces and generated fingerprints for comparison with TEM experiments. This comparison demonstrated a proof of concept for a technique suggesting the possibility for the identification of oxygen vacancy structures directly from TEM images. This research aims to improve our atomic-level understanding of oxide materials, by providing a methodology for the analysis of vacancy formation from very subtle phenomena in TEM images.
Anatase exists often in its reduced form (TiO2-x), enabling it to perform redox reactions through the absorption and release of oxygen into/from the crystal lattice. These processes result in structural changes, induced by defects in the material, which can theoretically be observed using advanced characterization methods. In situ electron microscopy is one of such methods, and can provide a window into these structural changes. However, in order to interpret the structural evolution caused by defects in materials, it is often necessary and pertinent to use atomistic simulations to compare the experimental images with models.
In this thesis project, we modeled the defect structures in anatase, around oxygen vacancies and at surfaces, using molecular dynamics, benchmarked with density functional theory. Using a “reactive” forcefield designed for the simulation of interactions between anatase and water that can model and treat bonding through the use of bond orders, different vacancy structures were analyzed and simulated. To compare these theoretical, generated models with experimental data, the “multislice approach” to TEM image simulation was used. We investigated a series of different vacancy configurations and surfaces and generated fingerprints for comparison with TEM experiments. This comparison demonstrated a proof of concept for a technique suggesting the possibility for the identification of oxygen vacancy structures directly from TEM images. This research aims to improve our atomic-level understanding of oxide materials, by providing a methodology for the analysis of vacancy formation from very subtle phenomena in TEM images.
ContributorsShindel, Benjamin Noam (Author) / Crozier, Peter (Thesis director) / Anwar, Shahriar (Committee member) / Singh, Arunima (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
This paper discusses the possibility of utilizing 2D molybdenum disulfide (MoS2) as a nanozyme to detect dopamine colorimetric assays, first by detecting color change in liquid solutions due to oxidation and then second on paper-based assays. MoS2 samples dispersed in methylcellulose (MC) solution were prepared using liquid-phase exfoliation through sonication. The dopamine (DOPA) and hydrogen peroxide (H¬¬2O2) solutions were prepared separately in specific concentrations. The solutions were mixed in a well plate and colorimetric results were analyzed by a plate reader, revealing a quantitative relationship between dopamine concentration and absorbance. Subsequent testing was conducted using paper assays, where combined solutions of DOPA and H2O2 were dropped onto paper with printed wax wells that contained dried MoS2. An analysis of the color change was conducted using a smartphone application called Color Grab to detect the red, green, and blue (RGB) values. Plotting the RGB results across the dopamine concentrations revealed a positively correlated relationship between the two factors, suggesting that a predictive model could be developed to predict dopamine concentrations based on measured colorimetric values.
ContributorsNalla, Akshay (Co-author, Co-author) / Wang, Qing Hua (Thesis director) / Green, Alexander (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Obtaining access to clean water is a global problem that is becoming more important with increasing population and advancing technology. Desalination through reverse osmosis (RO) is a promising technology takes advantage of the global supply of saline water to augment its limited freshwater reservoirs. To increase RO membrane performance, the feedwater is pretreated to take any excess pollutants out before the desalination. These pretreatment membranes are susceptible to fouling, which reduces efficiency and drives up costs of the overall process. Increasing the hydrophilicity of these membranes would reduce fouling, and electrospinning is a production method of pretreatment membranes with the capability to control hydrophilicity. This work explores how the composition of electrospun fibrous membranes containing blends of hydrophilic and hydrophobic polymers affects membrane characteristics such as wettability as well as filtration performance. Nonwoven, nanoscale membranes were prepared using electrospinning with a targeted application of pretreatment in water filtration. Using a rotating collector, electrospun mats of hydrophobic poly(vinyl chloride) (PVC) and hydrophilic poly(vinyl alcohol) (PVA) were simultaneously deposited from separate polymer solutions, and their polymer compositions were then characterized using Fourier Transform Infrared (FTIR) spectra. The data did not reveal a reliable correlation established between experimental control variables like flow rate and membrane composition. However, when the membranes' hydrophilicity was analyzed using static water contact angle measurements, a trend between PVA content and hydrophilicity was seen. This shows that the hypothesis of increasing PVA content to increase hydrophilicity is reliable, but with the current experimental design the PVA content is not controllable. Therefore, the primary future work is making a new experimental setup that will be able to better control membrane composition. Filtration studies to test for fouling and size exclusion will be performed once this control is obtained.
ContributorsTronstad, Zachary (Author) / Green, Matthew (Thesis director) / Holloway, Julianne (Committee member) / Epps, Thomas (Committee member) / Chemical Engineering Program (Contributor) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-12
Description
The purpose of this thesis project is to situate emotional knowledge of conventional and alternative menstrual products within cultural processes that construct menstrual shame and taboo. This study employs both quantitative and qualitative research methods - a survey distributed via snowball recruitment and an age-selected follow-up oral interview- to analyze emotions associated with specific menstrual products. I find that fear and disgust are the two most significant emotions to influence menstrual product choice - fear associated predominantly with penetrative internal products and disgust associated with external products that do not sufficiently contain the chaotic flow of menstrual blood. Ultimately, I argue that menstrual disgust and shame born from the construction of the menstruating female body as anarchic, threatening, and inferior to the male body permeates the daily lives of women through their relationships to and emotions towards menstrual products, their periods, and their bodies in general. I discuss how these relationships are modulated throughout the lifecycle by approaches to formal menstrual education approaches that instill shame and disgust, as well as the embodied experiences of pregnancy and birth. I also discuss implications for activist approaches to menstrual education and present the issue of menstrual suppression via birth control.
ContributorsMurray, Sarah Anne (Author) / Loebenberg, Abby (Thesis director) / Graff, Sarah (Thesis director) / Stoff, Laurie (Committee member) / School of Life Sciences (Contributor) / School of Social Transformation (Contributor) / Barrett, The Honors College (Contributor)
Created2018-12
Description
In order to produce efficient reverse osmosis membranes, it is necessary to minimize the effects of outside factors on the membrane surface that can reduce the flux of water through the membrane. One such problem is fouling. Fouling happens when particles are deposited on the membrane surface, blocking water flow through the membrane. Over time, the collection of foulants will prevent water through the membrane, increasing the amount of energy required in the system. Microgel, a heat-responsive colloidal gel, shows promise as an anti-foulant coating as it possesses functional groups similar to the membrane and compatible with common foulants and changes volume due to temperature differences. By coating the membrane with the microgel, foulants will attach to the functional groups of the microgel instead of those of the membrane Our hypothesis is that the change in volume of the microgel with different temperatures will help reduce and remove foulants. By functionalizing the surface of the membrane and the microgel, the microgel can covalently bond to the membrane surface and avoid detachment under reverse osmosis conditions. Microgel-coated reverse osmosis membranes have been fluorescently fouled to measure the decrease in foulants with heated crossflow under fluorescent microscopy. This process has shown a 50% decrease in fluorescence on the surface of the membrane indicating a decrease in foulants due to the presence of microgel. Under cross-flow conditions with a low flow rate, the microgel remains on the functionalized membrane for 8 hours with similar anti-fouling performance as the dip-coating process.
ContributorsKraetz, Andrea Nicole (Author) / Thomas, Marylaura (Thesis director) / Perreault, Francois (Committee member) / Chemical Engineering Program (Contributor) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
The standard for hybrid fuel grains is Hydroxyl-terminated polybutadiene (HTPB). With the advances in additive manufacturing, the promise of 3D printed fuel grains has become a possibility. Yet, 3D printed grains do not have as good of a regression rate as the casted HTPB grains. However, with 3D printing, the core of these grains can be printed to maximize surface area in contact with the oxidizer. The goal of this research is to print hybrid rocket fuel grains with various core geometries and test them on a small-scale hybrid test stand. While the hot fires are still under testing at the time of this abstract, the manufacturing posed an interesting outcome, being more time intensive than expected, contradicting the initial hypothesis of faster manufacturing. Future endeavors will continue research into the cores of the 3D printed grains, possible multi-material made grains and creating core structures for HTPB grains from 3D printed materials.
ContributorsRust, Daniel William Yun Jin (Author) / Rajadas, John (Thesis director) / Taconi, Carolyn (Committee member) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05
Description
Characterization of particulate process and product design is a difficult field because of the unique bulk properties and behaviors of particles that differ from gasses and liquids. The purpose of this research is to develop an equation to relate the angle of repose and flowability, the ability of the particle to flow as it pertains to particulate processes and product design. This research is important in multiple industries such as pharmaceuticals and food processes.
ContributorsNugent, Emily Rose (Author) / Emady, Heather (Thesis director) / Marvi, Hamidreza (Committee member) / Materials Science and Engineering Program (Contributor) / Dean, W.P. Carey School of Business (Contributor) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2019-05