Matching Items (107)
ContributorsCampbell, Andrew (Pianist) (Performer) / McLin, Katherine (Performer) / Spring, Robert (Performer) / Schupp, Karen (Performer) / FitzPatrick, Carole (Performer) / Cosand, Walter, 1950- (Performer) / ASU Library. Music Library (Publisher)
Created2008-01-19
Description
This work investigates the impact of wavelength-selective light trapping on photovoltaic efficiency and operating temperature, with a focus on GaAs and Si devices. A nanostructure array is designed to optimize the efficiency of a III-V narrow-band photonic power converter (PPC). Within finite-difference time-domain (FDTD) simulations, a nanotextured GaInP window layer yields a 25× path-length enhancement when integrated with a rear dielectric-metal reflector. Then, nanotexturing of GaInP is experimentally achieved with electron-beam lithography (EBL) and Cl2/Ar plasma etching. Time-resolved photoluminescence (TRPL) measurements show that the GaAs absorber lifetime does not drop due to the nanotexturing process, thus indicating a path to thinner, higher-efficiency PPCs. Next, wavelength-selective light management is examined for enhanced radiative cooling. It is shown that wavelength-selective optimizations of a module’s emissivity can yield 60-65% greater radiative cooling benefits compared to comparative changes across a broader wavelength range. State-of-the-art Si modules that utilize microtextured cover glass are shown to already achieve 99% of the radiative cooling gains that are possible for a photovoltaic device under full sunlight. In contrast, the sub-bandgap reflection (SBR) of Si modules is shown to be far below ideal. The low SBR of modules with textured Si cells (15%-26%) is shown to be the primary reason for their higher operating temperatures than modules with planar GaAs cells (SBR measured at 77%). For textured cells, typical of Si modules, light trapping amplifies parasitic absorption in the encapsulant and the rear mirror, yielding greater heat generation. Optimization of doping and the rear mirror of a Si module could increase the SBR to a maximum of 63%, with further increases available only if parasitic absorption in the encapsulation materials can be reduced. For thin films, increased heat generation may outweigh the photogeneration benefits that are possible with light trapping. These investigations motivate a wavelength-selective application of light trapping: light trapping for near- to above-bandgap photons to increase photogeneration; and out-coupling of light in mid- to far-infrared wavelengths to increase the emission of thermal radiation; but light trapping should ideally be avoided at sub-bandgap energies where there is substantial solar radiation to limit heat generation and material degradation.
ContributorsIrvin, Nicholas P. (Author) / Honsberg, Christiana B. (Thesis advisor) / King, Richard R. (Thesis advisor) / Nemanich, Robert J. (Committee member) / Smith, David J. (Committee member) / Arizona State University (Publisher)
Created2023
Description
The two-dimensional electron gas (2DEG) at SrTiO3-based oxide interfaces has been extensively studied recently for its high carrier density, high electron mobility, superconducting, ferromagnetic, ferrroelectric and magnetoresistance properties, with possible application for all-oxide devices. Understanding the mechanisms behind the 2DEG formation and factors affecting its properties is the primary objective of this dissertation.
Advanced electron microscopy techniques, including aberration-corrected electron microscopy and electron energy-loss spectroscopy (EELS) with energy-loss near-edge structure (ELNES) analysis, were used to characterize the interfaces. Image and spectrum data-processing algorithms, including subpixel atomic position measurement, and novel outlier detection by oversampling, subspace division based EELS background removal and bias-free endmember extraction algorithms for hyperspectral unmixing and mapping were heavily used. Results were compared with density functional theory (DFT) calculations for theoretical explanation.
For the γ-Al2O3/SrTiO3 system, negative-Cs imaging confirmed the formation of crystalline γ-Al2O3. ELNES hyperspectral unmixing combined with DFT calculations revealed that oxygen vacancies, rather than polar discontinuity, were the key to the 2DEG formation. The critical thickness can be explained by shift of the Fermi level due to Ti out diffusion from the substrate to the film.
At the LaTiO3/SrTiO3 interface, aberration-corrected imaging showed crystallinity deterioration in LaTiO3 films a few unit cells away from the interface. ELNES showed that oxygen annealing did not alter the crystallinity but converted Ti3+ near the interface into Ti4+, which explained disappearance of the conductivity.
At the EuO/SrTiO3 interface, both high-resolution imaging and ELNES confirmed EuO formation. ELNES hyperspectral unmixing showed a Ti3+ layer confined to within several unit cells of the interface on the SrTiO3 side, confirming the presence of oxygen vacancies.
At the BaTiO3/SrTiO3 interface, spontaneous polarization and local lattice parameters were measured directly in each unit cell column and compared with oxidation state mapping using ELNES with unit-cell resolution. The unusually large polarization near the interface and the polarization gradient were explained by oxygen vacancies and the piezoelectric effect due to epitaxial strain and strain gradient from relaxation.
Advanced electron microscopy techniques, including aberration-corrected electron microscopy and electron energy-loss spectroscopy (EELS) with energy-loss near-edge structure (ELNES) analysis, were used to characterize the interfaces. Image and spectrum data-processing algorithms, including subpixel atomic position measurement, and novel outlier detection by oversampling, subspace division based EELS background removal and bias-free endmember extraction algorithms for hyperspectral unmixing and mapping were heavily used. Results were compared with density functional theory (DFT) calculations for theoretical explanation.
For the γ-Al2O3/SrTiO3 system, negative-Cs imaging confirmed the formation of crystalline γ-Al2O3. ELNES hyperspectral unmixing combined with DFT calculations revealed that oxygen vacancies, rather than polar discontinuity, were the key to the 2DEG formation. The critical thickness can be explained by shift of the Fermi level due to Ti out diffusion from the substrate to the film.
At the LaTiO3/SrTiO3 interface, aberration-corrected imaging showed crystallinity deterioration in LaTiO3 films a few unit cells away from the interface. ELNES showed that oxygen annealing did not alter the crystallinity but converted Ti3+ near the interface into Ti4+, which explained disappearance of the conductivity.
At the EuO/SrTiO3 interface, both high-resolution imaging and ELNES confirmed EuO formation. ELNES hyperspectral unmixing showed a Ti3+ layer confined to within several unit cells of the interface on the SrTiO3 side, confirming the presence of oxygen vacancies.
At the BaTiO3/SrTiO3 interface, spontaneous polarization and local lattice parameters were measured directly in each unit cell column and compared with oxidation state mapping using ELNES with unit-cell resolution. The unusually large polarization near the interface and the polarization gradient were explained by oxygen vacancies and the piezoelectric effect due to epitaxial strain and strain gradient from relaxation.
ContributorsLu, Sirong (Author) / Smith, David J. (Thesis advisor) / McCartney, Martha R. (Thesis advisor) / Chizmeshya, Andrew (Committee member) / Crozier, Peter A. (Committee member) / Arizona State University (Publisher)
Created2018
Description
Personal histories are deeply rooted into my way of existence, far before my brain became ready to challenge such notions. While Americans have been witnesses to the splintering effects of colonialism and patriarchy on socialization, I ask two questions: (1) Where to stand within a society that promotes the marginalization of both women and brown bodies? And (2) how to combat these harsh realities and protect those most affected?
Being both Black and woman, I decided to embark upon a quest of self-actualization in this document. “Ain’t She Sweet: A Critical Choreographic Study of Identity & Intersectionality,” tracks the creative process and concept design behind my applied project for the Master of Fine Arts in Dance. Developed in extensive rehearsals, community engagement, journaling processes, and lived experiences, the physical product, “Ain’t She Sweet,” explored concepts such as identity, socialization, oppression, decolonization, sexuality, and civil rights. The chapters within this document illustrate the depth of the research conducted to form the evening-length production and an analysis of the completed work.
Being both Black and woman, I decided to embark upon a quest of self-actualization in this document. “Ain’t She Sweet: A Critical Choreographic Study of Identity & Intersectionality,” tracks the creative process and concept design behind my applied project for the Master of Fine Arts in Dance. Developed in extensive rehearsals, community engagement, journaling processes, and lived experiences, the physical product, “Ain’t She Sweet,” explored concepts such as identity, socialization, oppression, decolonization, sexuality, and civil rights. The chapters within this document illustrate the depth of the research conducted to form the evening-length production and an analysis of the completed work.
ContributorsCarney, Laina Reese (Author) / Schupp, Karen (Thesis advisor) / Weitz, Rose (Committee member) / White, Marcus (Committee member) / Fitzgerald, Mary (Committee member) / Arizona State University (Publisher)
Created2019
Description
Compound semiconductors tend to be more ionic if the cations and anions are further apart in atomic columns, such as II-VI compared to III-V compounds, due in part to the greater electronegativity difference between group-II and group-VI atoms. As the electronegativity between the atoms increases, the materials tend to have more insulator-like properties, including higher energy band gaps and lower indices of refraction. This enables significant differences in the optical and electronic properties between III-V, II-VI, and IV-VI semiconductors. Many of these binary compounds have similar lattice constants and therefore can be grown epitaxially on top of each other to create monolithic heterovalent and heterocrystalline heterostructures with optical and electronic properties unachievable in conventional isovalent heterostructures.
Due to the difference in vapor pressures and ideal growth temperatures between the different materials, precise growth methods are required to optimize the structural and optical properties of the heterovalent heterostructures. The high growth temperatures of the III-V materials can damage the II-VI barrier layers, and therefore a compromise must be found for the growth of high-quality III-V and II-VI layers in the same heterostructure. In addition, precise control of the interface termination has been shown to play a significant role in the crystal quality of the different layers in the structure. For non-polar orientations, elemental fluxes of group-II and group-V atoms consistently help to lower the stacking fault and dislocation density in the II-VI/III-V heterovalent heterostructures.
This dissertation examines the epitaxial growth of heterovalent and heterocrystalline heterostructures lattice-matched to GaAs, GaSb, and InSb substrates in a single-chamber growth system. The optimal growth conditions to achieve alternating layers of III-V, II-VI, and IV-VI semiconductors have been investigated using temperature ramps, migration-enhanced epitaxy, and elemental fluxes at the interface. GaSb/ZnTe distributed Bragg reflectors grown in this study significantly outperform similar isovalent GaSb-based reflectors and show great promise for mid-infrared applications. Also, carrier confinement in GaAs/ZnSe quantum wells was achieved with a low-temperature growth technique for GaAs on ZnSe. Additionally, nearly lattice-matched heterocrystalline PbTe/CdTe/InSb heterostructures with strong infrared photoluminescence were demonstrated, along with virtual (211) CdZnTe/InSb substrates with extremely low defect densities for long-wavelength optoelectronic applications.
Due to the difference in vapor pressures and ideal growth temperatures between the different materials, precise growth methods are required to optimize the structural and optical properties of the heterovalent heterostructures. The high growth temperatures of the III-V materials can damage the II-VI barrier layers, and therefore a compromise must be found for the growth of high-quality III-V and II-VI layers in the same heterostructure. In addition, precise control of the interface termination has been shown to play a significant role in the crystal quality of the different layers in the structure. For non-polar orientations, elemental fluxes of group-II and group-V atoms consistently help to lower the stacking fault and dislocation density in the II-VI/III-V heterovalent heterostructures.
This dissertation examines the epitaxial growth of heterovalent and heterocrystalline heterostructures lattice-matched to GaAs, GaSb, and InSb substrates in a single-chamber growth system. The optimal growth conditions to achieve alternating layers of III-V, II-VI, and IV-VI semiconductors have been investigated using temperature ramps, migration-enhanced epitaxy, and elemental fluxes at the interface. GaSb/ZnTe distributed Bragg reflectors grown in this study significantly outperform similar isovalent GaSb-based reflectors and show great promise for mid-infrared applications. Also, carrier confinement in GaAs/ZnSe quantum wells was achieved with a low-temperature growth technique for GaAs on ZnSe. Additionally, nearly lattice-matched heterocrystalline PbTe/CdTe/InSb heterostructures with strong infrared photoluminescence were demonstrated, along with virtual (211) CdZnTe/InSb substrates with extremely low defect densities for long-wavelength optoelectronic applications.
ContributorsLassise, Maxwell Brock (Author) / Zhang, Yong-Hang (Thesis advisor) / Smith, David J. (Committee member) / Johnson, Shane R (Committee member) / Mccartney, Martha R (Committee member) / Arizona State University (Publisher)
Created2019
Description
A highly uniform and repeatable method for synthesizing the single-layer transition metal dichalcogenides (TMDs) molybdenum disulfide, MoS2, and tungsten disulfide, WS2, was developed. This method employed chemical vapor deposition (CVD) of precursors in a custom built cold-wall reaction chamber designed to allow independent control over the growth parameters. Iterations of this reaction chamber were employed to overcome limitations to the growth method. First, molybdenum trioxide, MoO3, and S were co-evaporated from alumina coated W baskets to grow MoS2 on SiO2/Si substrates. Using this method, films were found to have repeatable coverage, but unrepeatable morphology. Second, the reaction chamber was modified to include a pair of custom bubbler delivery systems to transport diethyl sulfide (DES) and molybdenum hexacarbonyl (MHC) to the substrate as a S and Mo precursors. Third, tungsten hexacarbonyl (WHC) replaced MHC as a transition metal precursor for the synthesis of WS2 on Al2O3, substrates. This method proved repeatable in both coverage and morphology allowing the investigation of the effect of varying the flow of Ar, varying the substrate temperature and varying the flux of DES to the sample. Increasing each of these parameters was found to decrease the nucleation density on the sample and, with the exception of the Ar flow, induce multi-layer feature growth. This combination of precursors was also used to investigate the reported improvement in feature morphology when NaCl is placed upstream of the substrate. This was found to have no effect on experiments in the configurations used. A final effort was made to adequately increase the feature size by switching from DES to hydrogen sulfide, H2S, as a source of S. Using H2S and WHC to grow WS2 films on Al2O3, it was found that increasing the substrate temperature and increasing the H2S flow both decrease nucleation density. Increasing the H2S flow induced bi-layer growth. Ripening of synthesized WS2 crystals was demonstrated to occur when the sample was annealed, post-growth, in an Ar, H2, and H2S flow. Finally, it was verified that the final H2S and WHC growth method yielded repeatability and uniformity matching, or improving upon, the other methods and precursors investigated.
ContributorsLunceford, Chad (Author) / Drucker, Jeff (Thesis advisor) / Menéndez, Jose (Committee member) / Smith, David J. (Committee member) / Rez, Peter (Committee member) / Arizona State University (Publisher)
Created2019
Description
Semiconductor nanostructures are promising building blocks for light management in thin silicon solar cells and silicon-based tandems due their tunable optical properties. The present dissertation is organized along three main research areas: (1) characterization and modeling of III-V nanowires as active elements of solar cell tandems, (2) modeling of silicon nanopillars for reduced optical losses in ultra-thin silicon solar cells, and (3) characterization and modeling of nanoparticle-based optical coatings for light management.
First, the recombination mechanisms in polytype GaAs nanowires are studied through photoluminescence measurements coupled with rate equation analysis. When photons are absorbed in polytype nanowires, electrons and holes quickly thermalize to the band-edges of the zinc-blende and wurtzite phases, recombining indirectly in space across the type-II offset. Using a rate equation model, different configurations of polytype defects along the nanowire are investigated, which compare well with experiment considering spatially indirect recombination between different polytypes, and defect-related recombination due to twin planes and other defects. The presented analysis is a path towards predicting the performance of nanowire-based solar cells.
Following this topic, the optical mechanisms in silicon nanopillar arrays are investigated using full-wave optical simulations in comparison to measured reflectance data. The simulated electric field energy density profiles are used to elucidate the mechanisms contributing to the reduced front surface reflectance. Strong forward scattering and resonant absorption are observed for shorter- and longer- aspect ratio nanopillars, respectively, with the sub-wavelength periodicity causing additional diffraction. Their potential for light-trapping is investigated using full-wave optical simulation of an ultra-thin nanostructured substrate, where the conventional light-trapping limit is exceeded for near-bandgap wavelengths.
Finally, the correlation between the optical properties of silicon nanoparticle layers to their respective pore size distributions is investigated using optical and structural characterization coupled with full-wave optical simulation. The presence of
scattering is experimentally correlated to wider pore size distributions obtained from nitrogen adsorption measurements. The correlation is validated with optical simulation of random and clustered structures, with the latter approximating experimental. Reduced structural inhomogeneity in low-refractive-index nanoparticle inter-layers at the metal/semiconductor interface improves their performance as back reflectors, while reducing parasitic absorption in the metal.
First, the recombination mechanisms in polytype GaAs nanowires are studied through photoluminescence measurements coupled with rate equation analysis. When photons are absorbed in polytype nanowires, electrons and holes quickly thermalize to the band-edges of the zinc-blende and wurtzite phases, recombining indirectly in space across the type-II offset. Using a rate equation model, different configurations of polytype defects along the nanowire are investigated, which compare well with experiment considering spatially indirect recombination between different polytypes, and defect-related recombination due to twin planes and other defects. The presented analysis is a path towards predicting the performance of nanowire-based solar cells.
Following this topic, the optical mechanisms in silicon nanopillar arrays are investigated using full-wave optical simulations in comparison to measured reflectance data. The simulated electric field energy density profiles are used to elucidate the mechanisms contributing to the reduced front surface reflectance. Strong forward scattering and resonant absorption are observed for shorter- and longer- aspect ratio nanopillars, respectively, with the sub-wavelength periodicity causing additional diffraction. Their potential for light-trapping is investigated using full-wave optical simulation of an ultra-thin nanostructured substrate, where the conventional light-trapping limit is exceeded for near-bandgap wavelengths.
Finally, the correlation between the optical properties of silicon nanoparticle layers to their respective pore size distributions is investigated using optical and structural characterization coupled with full-wave optical simulation. The presence of
scattering is experimentally correlated to wider pore size distributions obtained from nitrogen adsorption measurements. The correlation is validated with optical simulation of random and clustered structures, with the latter approximating experimental. Reduced structural inhomogeneity in low-refractive-index nanoparticle inter-layers at the metal/semiconductor interface improves their performance as back reflectors, while reducing parasitic absorption in the metal.
ContributorsVulic, Natasa (Author) / Goodnick, Stephen M (Thesis advisor) / Honsberg, C. (Christiana B.) (Committee member) / Holman, Zachary C (Committee member) / Smith, David J. (Committee member) / Arizona State University (Publisher)
Created2019
Description
It’s Not That Simple: A Complex Journey of an MFA Applied Project discusses the experience of graduate student, Molly W. Schenck. Schenck’s applied project, It’s Not That Simple, was an interdisciplinary dance theatre performance piece that challenges rape culture on college campuses. While the focus of the applied project was this performance, it was the obstacles and highlights that were related to the project that made the journey memorable. This paper will discuss the history and evolution of It’s Not That Simple, the creative process, the research, the trajectory of the project, and reflections on the journey.
ContributorsSchenck, Molly W (Author) / Schupp, Karen (Thesis advisor) / Kaplan, Robert (Committee member) / Sterling, Pamela (Committee member) / Arizona State University (Publisher)
Created2016
Description
This document analyzes the use of the Principles of Design within the applied project It’s My Party, a multimedia dance theatre production, as a means to address and overcome the stigmatization of the Human Immunodeficiency Virus (HIV). Through the orchestration of dance, music, props, acting, video, and spoken word, this interdisciplinary work investigates how these production elements synthesize into a transformative theatrical experience for audiences. Outlined in this document is the eight month design process. The process included concept design, assessing, processing, customizing the message, script development, rehearsals, and video production, and concluded with an evening length production. Analyzed through the structural narrative of The Hero’s Journey, this autobiographic work details the author’s HIV-positive (HIV+) coming out story from a restorative narrative perspective. By addressing the subject of HIV from a contemporary point-of-view, this project strives to reencode the troubling associations affiliated with HIV with an empowered and hopeful understanding.
ContributorsAlvarez, Ricardo (Author) / Schupp, Karen (Thesis advisor) / Magenta, Muriel (Committee member) / Rajko, Jessica (Committee member) / Standley, Eileen (Committee member) / Arizona State University (Publisher)
Created2016
Description
This document outlines the formation and development of Worth the Weight, or WTW, a platform that seeks to sustain the Breaking community in Phoenix, Arizona and connect the generations by bringing them together in a newly and never before seen event in Breaking, an all weight class and division competition. In the last five to ten years there has been a noticeable decline in the local Breaking community, in part due to the introduction of new dance categories, economic and social changes, the cross over of academia and traditional studios in Phoenix; all combining to create a lack of longevity in veterans of the culture to pass on the tools of the trade to the next generation.
WTW is an event that occurs monthly for three consecutive months followed by a month off, totaling nine events and three seasons per calendar year. At each event dancers go head to head in battle in a single elimination style bracket, where they will add a loss or win to their overall season record. The goals of WTW are self-empowerment as well as ownership and investment in the community by those involved through participation in both the event and the planning process; all built on a foundation of trust within the Breaking community. This researcher has thirty years of direct involvement in the Breaking culture with twenty-two of those years as a practitioner in Phoenix, Arizona and co-founder of Furious Styles Crew, Arizona’s longest running Breaking crew. The development of WTW was drawn from this experience along with interviews and observations of Breaking communities worldwide. WTW intends to provide a reliable and consistent outlet during a time of instant gratification, allowing a space for self-discovery and the development of tools to be applied beyond movement. It is hoped that the format of WTW will be a model that can be adapted by other Breaking communities worldwide.
WTW is an event that occurs monthly for three consecutive months followed by a month off, totaling nine events and three seasons per calendar year. At each event dancers go head to head in battle in a single elimination style bracket, where they will add a loss or win to their overall season record. The goals of WTW are self-empowerment as well as ownership and investment in the community by those involved through participation in both the event and the planning process; all built on a foundation of trust within the Breaking community. This researcher has thirty years of direct involvement in the Breaking culture with twenty-two of those years as a practitioner in Phoenix, Arizona and co-founder of Furious Styles Crew, Arizona’s longest running Breaking crew. The development of WTW was drawn from this experience along with interviews and observations of Breaking communities worldwide. WTW intends to provide a reliable and consistent outlet during a time of instant gratification, allowing a space for self-discovery and the development of tools to be applied beyond movement. It is hoped that the format of WTW will be a model that can be adapted by other Breaking communities worldwide.
ContributorsMagaña, Jorge Edson (Author) / Vissicaro, Pegge (Thesis advisor) / Schupp, Karen (Committee member) / Gabbert, Kenneth (Committee member) / Arizona State University (Publisher)
Created2015