Matching Items (289)
Description
Filtration for microfluidic sample-collection devices is desirable for sample selection, concentration, preprocessing, and downstream manipulation, but microfabricating the required sub-micrometer filtration structure is an elaborate process. This thesis presents a simple method to fabricate polydimethylsiloxane (PDMS) devices with an integrated membrane filter that will sample, lyse, and extract the DNA from microorganisms in aqueous environments. An off-the-shelf membrane filter disc was embedded in a PDMS layer and sequentially bound with other PDMS channel layers. No leakage was observed during filtration. This device was validated by concentrating a large amount of cyanobacterium Synechocystis in simulated sample water with consistent performance across devices. After accumulating sufficient biomass on the filter, a sequential electrochemical lysing process was performed by applying 5VDC across the filter. This device was further evaluated by delivering several samples of differing concentrations of cyanobacterium Synechocystis then quantifying the DNA using real-time PCR. Lastly, an environmental sample was run through the device and the amount of photosynthetic microorganisms present in the water was determined. The major breakthroughs in this design are low energy demand, cheap materials, simple design, straightforward fabrication, and robust performance, together enabling wide-utility of similar chip-based devices for field-deployable operations in environmental micro-biotechnology.
ContributorsLecluse, Aurelie (Author) / Meldrum, Deirdre (Thesis advisor) / Chao, Joseph (Thesis advisor) / Westerhoff, Paul (Committee member) / Arizona State University (Publisher)
Created2011
Description
Single cell phenotypic heterogeneity studies reveal more information about the pathogenesis process than conventional bulk methods. Furthermore, investigation of the individual cellular response mechanism during rapid environmental changes can only be achieved at single cell level. By enabling the study of cellular morphology, a single cell three-dimensional (3D) imaging system can be used to diagnose fatal diseases, such as cancer, at an early stage. One proven method, CellCT, accomplishes 3D imaging by rotating a single cell around a fixed axis. However, some existing cell rotating mechanisms require either intricate microfabrication, and some fail to provide a suitable environment for living cells. This thesis develops a microvorterx chamber that allows living cells to be rotated by hydrodynamic alone while facilitating imaging access. In this thesis work, 1) the new chamber design was developed through numerical simulation. Simulations revealed that in order to form a microvortex in the side chamber, the ratio of the chamber opening to the channel width must be smaller than one. After comparing different chamber designs, the trapezoidal side chamber was selected because it demonstrated controllable circulation and met the imaging requirements. Microvortex properties were not sensitive to the chambers with interface angles ranging from 0.32 to 0.64. A similar trend was observed when chamber heights were larger than chamber opening. 2) Micro-particle image velocimetry was used to characterize microvortices and validate simulation results. Agreement between experimentation and simulation confirmed that numerical simulation was an effective method for chamber design. 3) Finally, cell rotation experiments were performed in the trapezoidal side chamber. The experimental results demonstrated cell rotational rates ranging from 12 to 29 rpm for regular cells. With a volumetric flow rate of 0.5 µL/s, an irregular cell rotated at a mean rate of 97 ± 3 rpm. Rotational rates can be changed by altering inlet flow rates.
ContributorsZhang, Wenjie (Author) / Frakes, David (Thesis advisor) / Meldrum, Deirdre (Thesis advisor) / Chao, Shih-hui (Committee member) / Wang, Xiao (Committee member) / Arizona State University (Publisher)
Created2011
Description
Laboratory automation systems have seen a lot of technological advances in recent times. As a result, the software that is written for them are becoming increasingly sophisticated. Existing software architectures and standards are targeted to a wider domain of software development and need to be customized in order to use them for developing software for laboratory automation systems. This thesis proposes an architecture that is based on existing software architectural paradigms and is specifically tailored to developing software for a laboratory automation system. The architecture is based on fairly autonomous software components that can be distributed across multiple computers. The components in the architecture make use of asynchronous communication methodologies that are facilitated by passing messages between one another. The architecture can be used to develop software that is distributed, responsive and thread-safe. The thesis also proposes a framework that has been developed to implement the ideas proposed by the architecture. The framework is used to develop software that is scalable, distributed, responsive and thread-safe. The framework currently has components to control very commonly used laboratory automation devices such as mechanical stages, cameras, and also to do common laboratory automation functionalities such as imaging.
ContributorsKuppuswamy, Venkataramanan (Author) / Meldrum, Deirdre (Thesis advisor) / Collofello, James (Thesis advisor) / Sarjoughian, Hessam S. (Committee member) / Johnson, Roger (Committee member) / Arizona State University (Publisher)
Created2012
Description
Single cell analysis has become increasingly important in understanding disease onset, progression, treatment and prognosis, especially when applied to cancer where cellular responses are highly heterogeneous. Through the advent of single cell computerized tomography (Cell-CT), researchers and clinicians now have the ability to obtain high resolution three-dimensional (3D) reconstructions of single cells. Yet to date, no live-cell compatible version of the technology exists. In this thesis, a microfluidic chip with the ability to rotate live single cells in hydrodynamic microvortices about an axis parallel to the optical focal plane has been demonstrated. The chip utilizes a novel 3D microchamber design arranged beneath a main channel creating flow detachment into the chamber, producing recirculating flow conditions. Single cells are flowed through the main channel, held in the center of the microvortex by an optical trap, and rotated by the forces induced by the recirculating fluid flow. Computational fluid dynamics (CFD) was employed to optimize the geometry of the microchamber. Two methods for the fabrication of the 3D microchamber were devised: anisotropic etching of silicon and backside diffuser photolithography (BDPL). First, the optimization of the silicon etching conditions was demonstrated through design of experiment (DOE). In addition, a non-conventional method of soft-lithography was demonstrated which incorporates the use of two positive molds, one of the main channel and the other of the microchambers, compressed together during replication to produce a single ultra-thin (<200 µm) negative used for device assembly. Second, methods for using thick negative photoresists such as SU-8 with BDPL have been developed which include a new simple and effective method for promoting the adhesion of SU-8 to glass. An assembly method that bonds two individual ultra-thin (<100 µm) replications of the channel and the microfeatures has also been demonstrated. Finally, a pressure driven pumping system with nanoliter per minute flow rate regulation, sub-second response times, and < 3% flow variability has been designed and characterized. The fabrication and assembly of this device is inexpensive and utilizes simple variants of conventional microfluidic fabrication techniques, making it easily accessible to the single cell analysis community.
ContributorsMyers, Jakrey R (Author) / Meldrum, Deirdre (Thesis advisor) / Johnson, Roger (Committee member) / Frakes, David (Committee member) / Arizona State University (Publisher)
Created2012
Description
Introduction/Purpose: the purpose of this study was to explore the perception of care after stillbirth and the use of physical activity and/or mindful approaches (e.g., yoga) to cope with grief in women of racial/ethnic minority who have experienced stillbirth.
Methods: This was an exploratory qualitative research study. Participants were African American, Hispanic, Asian, and American Indian women, between the ages of 26 and 38, who have experienced stillbirth within the past 3 years. Participants completed a 20-30 minute phone interview.
Results: Fourteen women participated in the study (M age = 31.02 ± 5.97 years; M time since stillbirth = 1.47 ± 0.94 years). Women’s perceptions about physical activity and mindfulness to cope with grief were coded into the following major themes: perception of health care after stillbirth (satisfaction with the level of care provided), recommendations about inter-conception health care from physician (relating to mental, emotional, and physical health), grief (comfort with communicating with the physician), coping mechanisms, perception of the relationship between physical activity and mood, barriers to participating in physical activity (social and behavioral), pre-pregnancy physical activity, and perception of mindful approach (e.g., yoga) as a coping mechanism.
Conclusion: This was the first study to explore perceptions of health care and the use of physical activity and/or mindful approaches (e.g., yoga) to cope with grief after stillbirth in women of racial/ethnic minority. Findings from this study may help inform health care professionals alter their care practices and introduce physical activity and mindfulness based approaches as coping mechanisms to mothers of stillborn babies.
Methods: This was an exploratory qualitative research study. Participants were African American, Hispanic, Asian, and American Indian women, between the ages of 26 and 38, who have experienced stillbirth within the past 3 years. Participants completed a 20-30 minute phone interview.
Results: Fourteen women participated in the study (M age = 31.02 ± 5.97 years; M time since stillbirth = 1.47 ± 0.94 years). Women’s perceptions about physical activity and mindfulness to cope with grief were coded into the following major themes: perception of health care after stillbirth (satisfaction with the level of care provided), recommendations about inter-conception health care from physician (relating to mental, emotional, and physical health), grief (comfort with communicating with the physician), coping mechanisms, perception of the relationship between physical activity and mood, barriers to participating in physical activity (social and behavioral), pre-pregnancy physical activity, and perception of mindful approach (e.g., yoga) as a coping mechanism.
Conclusion: This was the first study to explore perceptions of health care and the use of physical activity and/or mindful approaches (e.g., yoga) to cope with grief after stillbirth in women of racial/ethnic minority. Findings from this study may help inform health care professionals alter their care practices and introduce physical activity and mindfulness based approaches as coping mechanisms to mothers of stillborn babies.
ContributorsArvayo, Jordan Michelle (Author) / Huberty, Jennifer (Thesis director) / Hoffner, Kristin (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor)
Created2015-05
Description
This study examined the effect of an 8-week exercise intervention on functional exercise capacity in adolescents with Down syndrome (DS). Forty participants were randomly assigned to one of three groups: assisted cycling (ACT) (n = 17) where participants experienced at least a 35% increase in their voluntary cycling speed through the use of a motor, voluntary cycling (VC) (n = 15) where participants cycled at a self-selected cadence, and no cycling (NC) (n = 8) where participants did not participate in any cycling intervention. In each cycling intervention, each participant completed three, 30 minute cycling sessions per week for a total of eight weeks. The Six-Minute Walk Test (6MWT) was administered prior to and after the 8-week intervention in pre-test and post-test assessment sessions, respectively. Our hypothesis was somewhat supported in that functional exercise capacity improved after ACT as measured by an increase in total number of laps walked, total distance walked, and average walking speed during the 6MWT, when compared to VC or NC.
ContributorsCook, Megan Rey (Author) / Ringenbach, Shannon (Thesis director) / Huberty, Jennifer (Committee member) / Barrett, The Honors College (Contributor) / School of Nutrition and Health Promotion (Contributor)
Created2015-05
Description
Objective: Fewer than 50% of female college freshmen meet physical activity (PA) guidelines. Innovative approaches that help college women increase their PA are warranted. The study purpose was to pilot test a magazine-based discussion group for improving PA, self-worth, and nutrition behaviors in freshmen college females. Method: Thirty-seven women (18-20 years) were randomized to intervention (n=17) and control (n=20) groups. The intervention group participated in an 8-week magazine-based discussion group adapted from a previously tested social cognitive theory based intervention, Fit Minded. Excerpts from a popular women's health magazine were discussed during weekly meetings incorporating PA, self-worth and nutrition education. The control group did not attend meetings, but received the magazines. Outcomes and feasibility measures included: self-reported PA, general self-worth, knowledge self-worth, self-efficacy, social support, and daily fruits, vegetables, junk food, sugar-sweetened beverage consumption. Results: Twelve participants from the intervention group attended more than 75% of meetings. A time effect was observed for PA (p=0.001) and family social support (p=0.002). Time x group effects were observed for PA (p=0.001), general self-worth (p=0.04), knowledge self-worth (p=0.03), and daily sugar-sweetened beverage consumption (p=0.03), with the intervention group reporting greater increases in PA, general self-worth and knowledge self-worth and greater decreases in daily sugar-sweetened beverage consumption. Although not significant, the intervention group demonstrated positive trends in self-efficacy, friend social support and fruit and veggie consumption as compared to the control group. Conclusion: A magazine-based discussion group may provide a promising platform to improve PA, self-worth and nutrition behaviors in female college freshmen.
ContributorsPellitteri, Katelyn (Author) / Huberty, Jennifer (Thesis director) / Bruening, Meg (Committee member) / Barrett, The Honors College (Contributor) / T. Denny Sanford School of Social and Family Dynamics (Contributor) / School of Social Transformation (Contributor) / Sandra Day O'Connor College of Law (Contributor)
Created2014-05
Description
This thesis shows analyses of mixing and transport patterns associated with Hurricane Katrina as it hit the United States in August of 2005. Specifically, by applying atmospheric velocity information from the Weather Research and Forecasting System, finite-time Lyapunov exponents have been computed and the Lagrangian Coherent Structures have been identified. The chaotic dynamics of material transport induced by the hurricane are results from these structures within the flow. Boundaries of the coherent structures are highlighted by the FTLE field. Individual particle transport within the hurricane is affected by the location of these boundaries. In addition to idealized fluid particles, we also studied inertial particles which have finite size and inertia. Basing on established Maxey-Riley equations of the dynamics of particles of finite size, we obtain a reduced equation governing the position process. Using methods derived from computer graphics, we identify maximizers of the FTLE field. Following and applying these ideas, we analyze the dynamics of inertial particle transport within Hurricane Katrina, through comparison of trajectories of dierent sized particles and by pinpointing the location of the Lagrangian Coherent Structures.
ContributorsWake, Christian (Author) / Tang, Wenbo (Thesis director) / Moustaoui, Mohamed (Committee member) / Kostelich, Eric (Committee member) / Barrett, The Honors College (Contributor) / College of Liberal Arts and Sciences (Contributor)
Created2012-12
Description
The goal of this project was to examine the separatricies that define regions of distinct flow behaviors in realistic time-dependent dynamical systems. In particular, we adapted previously available methods for computing the Finite-Time Lyapunov Exponent (FTLE) to a set of measured wind velocity data in order to visualize the separatricies as ridges of the FTLE field in a section of the atmosphere. This visualization required a number of alterations to the original methods, including interpolation techniques and two different adaptive refinement schemes for producing more detailed results. Overall, there were two computations performed with the wind velocity data: once along a single spherical surface, on which the separatricies could be visualized as material lines, and then along a three-dimensional section of the atmosphere, for which the separatricies were material surfaces. The resulting figures provide an image of the Antarctic polar vortex from the wind velocity data, which is consistent with other data gathered on the same date.
ContributorsUpton, James Thomas (Author) / Tang, Wenbo (Thesis director) / Moustaoui, Mohamed (Committee member) / Barrett, The Honors College (Contributor) / School of International Letters and Cultures (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Department of Physics (Contributor)
Created2014-05
Description
Using weather data from the Weather Research and Forecasting model (WRF), we analyze the transport of inertial particles in Hurricane Katrina in order to identify coherent patterns of motion. For our analysis, we choose a Lagrangian approach instead of an Eulerian approach because the Lagrangian approach is objective and frame-independent, and gives results which are better defined. In particular, we locate Lagrangian Coherent Structures (LCS), which are smooth sets of fluid particles which are locally most hyperbolic (either attracting or repelling). We implement a variational method for locating LCS and compare the results to previous computation of LCS using Finite-Time Lyapunov Exponents (FTLE) to identify regions of high stretching in the fluid flow.
ContributorsDeibel, Angelica Rae (Author) / Tang, Wenbo (Thesis director) / Moustaoui, Mohamed (Committee member) / Kostelich, Eric (Committee member) / Barrett, The Honors College (Contributor) / School of Mathematical and Statistical Sciences (Contributor) / Department of Physics (Contributor)
Created2013-05