Matching Items (17)
Description
The origin of the solar system and formation of planets such as Earth are among the most fascinating, outstanding scientific problems. From theoretical models to natural observations, it is possible to infer a general way of how the solar system evolved from the gravitational collapse of the molecular cloud to accretion and differentiation of planetary-sized bodies. This dissertation attempts to place additional constraints on the source, distribution, and evolution of chemical variability in the early solar system, Mars, and Earth.
A new method was developed for the measurement of titanium isotopes in calcium-aluminum-rich inclusions (CAIs) by laser ablation multi-collector inductively coupled plasma mass spectrometry. The isotopic compositions of 17 Allende CAIs define a narrow range with clearly resolved excesses in 46Ti and 50Ti and suggests that "normal" CAIs formed from a relatively uniform reservoir. Petrologic and isotopic analysis of a new FUN (Fractionated and Unknown Nuclear effects) CAI suggests that normal and FUN CAIs condensed in similar environments, but subsequently evolved under vastly different conditions.
Volatiles may have influenced the formation and evolution of basaltic magmas on Mars. Light lithophile element (LLE) and fluorine (F) concentrations and isotopic compositions of pyroxene determined in situ in several Martian meteorites suggests that the primary magmatic signature of LLE and F zonation in Shergottite pyroxene has been disturbed by post-crystallization diffusive equilibration. Using relevant crystal-melt partition coefficients the F contents for Martian meteorite parental melts are ~910 and ~220 ppm. Estimates of the F content in the Shergottite and Nakhlite source regions are similar to that of mid-ocean ridge basalts (MORB) and ocean island basalts (OIB), respectively, here on Earth.
Noble gas systematics of OIBs relative to MORBs, suggests OIBs preferentially sample a primordial reservoir located within Earth's mantle. Geodynamic calculations were performed to investigate the time-dependent rate of material entrained into plumes from these primordial reservoirs. These models predict melts rising to the surface will contain variable proportions of primordial material. The results demonstrate that although high 3He/4He ratios may mandate a mantle plume that samples a primordial reservoir, more MORB-like 3He/4He ratios in OIBs do not preclude a deep plume source.
A new method was developed for the measurement of titanium isotopes in calcium-aluminum-rich inclusions (CAIs) by laser ablation multi-collector inductively coupled plasma mass spectrometry. The isotopic compositions of 17 Allende CAIs define a narrow range with clearly resolved excesses in 46Ti and 50Ti and suggests that "normal" CAIs formed from a relatively uniform reservoir. Petrologic and isotopic analysis of a new FUN (Fractionated and Unknown Nuclear effects) CAI suggests that normal and FUN CAIs condensed in similar environments, but subsequently evolved under vastly different conditions.
Volatiles may have influenced the formation and evolution of basaltic magmas on Mars. Light lithophile element (LLE) and fluorine (F) concentrations and isotopic compositions of pyroxene determined in situ in several Martian meteorites suggests that the primary magmatic signature of LLE and F zonation in Shergottite pyroxene has been disturbed by post-crystallization diffusive equilibration. Using relevant crystal-melt partition coefficients the F contents for Martian meteorite parental melts are ~910 and ~220 ppm. Estimates of the F content in the Shergottite and Nakhlite source regions are similar to that of mid-ocean ridge basalts (MORB) and ocean island basalts (OIB), respectively, here on Earth.
Noble gas systematics of OIBs relative to MORBs, suggests OIBs preferentially sample a primordial reservoir located within Earth's mantle. Geodynamic calculations were performed to investigate the time-dependent rate of material entrained into plumes from these primordial reservoirs. These models predict melts rising to the surface will contain variable proportions of primordial material. The results demonstrate that although high 3He/4He ratios may mandate a mantle plume that samples a primordial reservoir, more MORB-like 3He/4He ratios in OIBs do not preclude a deep plume source.
ContributorsWilliams, Curtis Davis (Author) / Wadhwa, Meenakshi (Thesis advisor) / McNamara, Allen K (Committee member) / Bell, David R. (Committee member) / Garnero, Edward J (Committee member) / Young, Patrick (Committee member) / Arizona State University (Publisher)
Created2014
Description
Seismic observations have revealed two large low shear velocity provinces (LLSVPs) in the lowermost mantle beneath Pacific and Africa. One hypothesis for the origin of LLSVPs is that they are caused by accumulation of subducted oceanic crust on the core-mantle boundary (CMB). Here, I perform high resolution geodynamical calculations to test this hypothesis. The result shows that it is difficult for a thin (~ 6 km) subducted oceanic crust to accumulate on the CMB, and the major part of it is viscously stirred into the surrounding mantle. Another hypothesis for the origin of LLSVPs is that they are caused by thermochemical piles of more-primitive material which is remnant of Earth's early differentiation. In such case, a significant part of the subducted oceanic crust would enter the more-primitive reservoir, while other parts are either directly entrained into mantle plumes forming on top of the more-primitive reservoir or stirred into the background mantle. As a result, mantle plumes entrain a variable combination of compositional components including more-primitive material, old oceanic crust which first enters the more-primitive reservoir and is later entrained into mantle plumes with the more-primitive material, young oceanic crust which is directly entrained into mantle plumes without contacting the more-primitive reservoir, and depleted background mantle material. The result reconciles geochemical observation of multiple compositional components and varying ages of oceanic crust in the source of ocean-island basalts. Seismic studies have detected ultra-low velocity zones (ULVZs) in some localized regions on the CMB. Here, I present 3D thermochemical calculations to show that the distribution of ULVZs provides important information about their origin. ULVZs with a distinct composition tend to be located at the edges of LLSVPs, while ULVZs solely caused by partial melting tend to be located inboard from the edges of LLSVPs. This indicates that ULVZs at the edges of LLSVPs are best explained by distinct compositional heterogeneity, while ULVZs located insider of LLSVPs are better explained by partial melting. The results provide additional constraints for the origin of ULVZs.
ContributorsLi, Mingming (Author) / McNamara, Allen K (Thesis advisor) / Garnero, Edward J (Committee member) / Shim, Sang-Heon (Committee member) / Tyburczy, James (Committee member) / Clarke, Amanda (Committee member) / Arizona State University (Publisher)
Created2015
Description
This research investigates Earth structure in the core-mantle boundary (CMB) region, where the solid rocky mantle meets the molten iron alloy core. At long wavelengths, the lower mantle is characterized by two nearly antipodal large low shear velocity provinces (LLSVPs), one beneath the Pacific Ocean the other beneath Africa and the southern Atlantic Ocean. However, fine-scale LLSVP structure as well as its relationship with plate tectonics, mantle convection, hotspot volcanism, and Earth's outer core remains poorly understood. The recent dramatic increase in seismic data coverage due to the EarthScope experiment presents an unprecedented opportunity to utilize large concentrated datasets of seismic data to improve resolution of lowermost mantle structures. I developed an algorithm that identifies anomalously broadened seismic waveforms to locate sharp contrasts in shear velocity properties across the margins of the LLSVP beneath the Pacific. The result suggests that a nearly vertical mantle plume underlies Hawaii that originates from a peak of a chemically distinct reservoir at the base of the mantle, some 600-900 km above the CMB. Additionally, acute horizontal Vs variations across and within the northern margin of the LLSVP beneath the central Pacific Ocean are inferred from forward modeling of differential travel times between S (and Sdiff) and SKS, and also between ScS and S. I developed a new approach to expand the geographic detection of ultra-low velocity zones (ULVZs) with a new ScS stacking approach that simultaneously utilizes the pre- and post-cursor wavefield.. Strong lateral variations in ULVZ thicknesses and properties are found across the LLSVP margins, where ULVZs are thicker and stronger within the LLSVP than outside of it, consistent with convection model predictions. Differential travel times, amplitude ratios, and waveshapes of core waves SKKS and SKS are used to investigate CMB topography and outermost core velocity structure. 1D and 2D wavefield simulations suggest that the complicated geographic distribution of observed SKKS waveform anomalies might be a result of CMB topography and a higher velocity outermost core. These combined analyses depict a lowermost mantle that is rich in fine-scale structural complexity, which advances our understanding of its integral role in mantle circulation, mixing, and evolution.
ContributorsZhao, Chunpeng (Author) / Garnero, Edward J (Thesis advisor) / Mcnamara, Allen (Committee member) / Tyburczy, James (Committee member) / Fouch, Matthew (Committee member) / Sharp, Thomas (Committee member) / Arizona State University (Publisher)
Created2012
Description
Explosive mafic (basaltic) volcanism is not easily explained by current eruption models, which predict low energy eruptions from low viscosity magma due to decoupling of volatiles (gases). Sunset Crater volcano provides an example of an alkali basalt magma that produced a highly explosive sub-Plinian eruption. I investigate the possible role of magmatic volatiles in the Sunset Crater eruption through study of natural samples of trapped volatiles (melt inclusions) and experiments on mixed-volatile (H2O-CO2) solubility in alkali-rich mafic magmas.
I conducted volatile-saturated experiments in six mafic magma compositions at pressures between 400 MPa and 600 MPa to investigate the influence of alkali elements (sodium and potassium) on volatile solubility. The experiments show that existing volatile solubility models do not accurately describe CO2 solubility at mid-crustal depths. I calculate thermodynamic fits for solubility in each composition and calibrate a general thermodynamic model for application to other mafic magmas. The model shows that the relative percent abundances of sodium, calcium, and potassium have the greatest influence on CO2 solubility in mafic magmas.
I analyzed olivine-hosted melt inclusions (MIs) from Sunset Crater to investigate pre-eruptive volatiles. I compared the early fissure activity to the sub-Plinian eruptive phases. The MIs are similar in major element and volatile composition suggesting a relatively homogeneous magma. The H2O content is relatively low (~1.2 wt%), whereas the dissolved CO2 content is high (~2300 ppm). I explored rehomogenization and Raman spectroscopy to quantify CO2 abundance in MI vapor bubbles. Calculations of post-entrapment bubble growth suggest that some MI bubbles contain excess CO2. This implies that the magma was volatile-saturated and MIs trapped exsolved vapor during their formation. The total volatile contents of MIs, including bubble contents but excluding excess vapor, indicate pre-eruptive magma storage from 10 km to 18 km depth.
The high CO2 abundance found in Sunset Crater MIs allowed the magma to reach volatile-saturation at mid-crustal depths and generate overpressure, driving rapid ascent to produce the explosive eruption. The similarities in MIs and volatiles between the fissure eruption and the sub-Plinian phases indicate that shallow-level processes also likely influenced the final eruptive behavior.
I conducted volatile-saturated experiments in six mafic magma compositions at pressures between 400 MPa and 600 MPa to investigate the influence of alkali elements (sodium and potassium) on volatile solubility. The experiments show that existing volatile solubility models do not accurately describe CO2 solubility at mid-crustal depths. I calculate thermodynamic fits for solubility in each composition and calibrate a general thermodynamic model for application to other mafic magmas. The model shows that the relative percent abundances of sodium, calcium, and potassium have the greatest influence on CO2 solubility in mafic magmas.
I analyzed olivine-hosted melt inclusions (MIs) from Sunset Crater to investigate pre-eruptive volatiles. I compared the early fissure activity to the sub-Plinian eruptive phases. The MIs are similar in major element and volatile composition suggesting a relatively homogeneous magma. The H2O content is relatively low (~1.2 wt%), whereas the dissolved CO2 content is high (~2300 ppm). I explored rehomogenization and Raman spectroscopy to quantify CO2 abundance in MI vapor bubbles. Calculations of post-entrapment bubble growth suggest that some MI bubbles contain excess CO2. This implies that the magma was volatile-saturated and MIs trapped exsolved vapor during their formation. The total volatile contents of MIs, including bubble contents but excluding excess vapor, indicate pre-eruptive magma storage from 10 km to 18 km depth.
The high CO2 abundance found in Sunset Crater MIs allowed the magma to reach volatile-saturation at mid-crustal depths and generate overpressure, driving rapid ascent to produce the explosive eruption. The similarities in MIs and volatiles between the fissure eruption and the sub-Plinian phases indicate that shallow-level processes also likely influenced the final eruptive behavior.
ContributorsAllison, Chelsea Maria (Author) / Clarke, Amanda B (Thesis advisor) / Hervig, Richard L (Committee member) / Roggensack, Kurt (Committee member) / Semken, Steven (Committee member) / Till, Christy B. (Committee member) / Arizona State University (Publisher)
Created2018
Description
An exhaustive parameter study involving 133 dynamic crystallization experiments was conducted, to investigate the validity of the planetary embryo bow shock model by testing whether the cooling rates predicted by this model are consistent with the most dominant chondrule texture, porphyritic. Results show that using coarse-grained precursors and heating durations ≤ 5 minutes at peak temperature, porphyritic textures can be reproduced at cooling rates ≤ 600 K/hr, rates consistent with planetary embryo bow shocks. Porphyritic textures were found to be commonly associated with skeletal growth, which compares favorably to features in natural chondrules from Queen Alexandra Range 97008 analyzed, which show similar skeletal features. It is concluded that the experimentally reproduced porphyritic textures are consistent with those of natural chondrules. This work shows heating duration is a major determinant of chondrule texture and the work further constrains this parameter by measuring the rate of chemical dissolution of relict grains. The results provide a robust, independent constraint that porphyritic chondrules were heated at their peak temperatures for ≤ 10 minutes. This is also consistent with heating by bow shocks. The planetary embryo bow shock model therefore remains a viable chondrule mechanism for the formation of the vast majority of chondrules, and the results presented here therefore strongly suggest that large planetary embryos were present and on eccentric orbits during the first few million years of the Solar System’s history.
ContributorsPerez, Alexandra Marie (Author) / Desch, Steven J (Thesis advisor) / Till, Christy B. (Committee member) / Schrader, Devin L (Committee member) / Arizona State University (Publisher)
Created2018
Description
Remote sensing in visible to near-infrared wavelengths is an important tool for identifying and understanding compositional differences on planetary surfaces. Electronic transitions produce broad absorption bands that are often due to the presence of iron cations in crystalline mineral structures or amorphous phases. Mars’ iron-rich and variably oxidized surface provides an ideal environment for detecting spectral variations that can be related to differences in surface dust cover or the composition of the underlying bedrock. Several imaging cameras sent to Mars include the capability to selectively filter incoming light to discriminate between surface materials.
At the coarse spatial resolution provided by the wide-angle Mars Color Imager (MARCI) camera aboard the Mars Reconnaissance Orbiter (MRO), regional scale differences in reflectance at all wavelengths are dominated by the presence or absence of Fe3+-rich dust. The dust cover in many regions is highly variable, often with strong seasonal dependence although major storm events can redistribute dust in ways that significantly alter the albedo of large-scale regions outside of the normal annual cycle. Surface dust reservoirs represent an important part of the martian climate system and may play a critical role in the growth of regional dust storms to planet-wide scales. Detailed investigation of seasonal and secular changes permitted by repeated MARCI imaging coverage have allowed the surface dust coverage of the planet at large to be described and have revealed multiannual replenishing of regions historically associated with the growth of storms.
From the ground, rover-based multispectral imaging acquired by the Mastcam cameras allows compositional discrimination between bedrock units and float material encountered along the Curiosity rover’s traverse across crater floor and lower Mt. Sharp units. Mastcam spectra indicate differences in primary mineralogy, the presence of iron-bearing alteration phases, and variations in iron oxidation state, which occur at specific locations along the rover’s traverse. These changes represent differences in the primary depositional environment and the action of later alteration by fluids circulating through fractures in the bedrock. Loose float rocks sample materials brought into the crater by fluvial or other processes. Mastcam observations provide important constraints on the geologic history of the Gale Crater site.
At the coarse spatial resolution provided by the wide-angle Mars Color Imager (MARCI) camera aboard the Mars Reconnaissance Orbiter (MRO), regional scale differences in reflectance at all wavelengths are dominated by the presence or absence of Fe3+-rich dust. The dust cover in many regions is highly variable, often with strong seasonal dependence although major storm events can redistribute dust in ways that significantly alter the albedo of large-scale regions outside of the normal annual cycle. Surface dust reservoirs represent an important part of the martian climate system and may play a critical role in the growth of regional dust storms to planet-wide scales. Detailed investigation of seasonal and secular changes permitted by repeated MARCI imaging coverage have allowed the surface dust coverage of the planet at large to be described and have revealed multiannual replenishing of regions historically associated with the growth of storms.
From the ground, rover-based multispectral imaging acquired by the Mastcam cameras allows compositional discrimination between bedrock units and float material encountered along the Curiosity rover’s traverse across crater floor and lower Mt. Sharp units. Mastcam spectra indicate differences in primary mineralogy, the presence of iron-bearing alteration phases, and variations in iron oxidation state, which occur at specific locations along the rover’s traverse. These changes represent differences in the primary depositional environment and the action of later alteration by fluids circulating through fractures in the bedrock. Loose float rocks sample materials brought into the crater by fluvial or other processes. Mastcam observations provide important constraints on the geologic history of the Gale Crater site.
ContributorsWellington, Danika (Author) / Bell Iii, James F (Thesis advisor) / Christensen, Philip R. (Committee member) / Robinson, Mark S (Committee member) / Sharp, Thomas G (Committee member) / Till, Christy B. (Committee member) / Arizona State University (Publisher)
Created2018
Description
Utilizing both 16S and 18S rRNA sequencing alongside energetic calculations from geochemical measurements offers a bridged perspective of prokaryotic and eukaryotic community diversities and their relationships to geochemical diversity. Yellowstone National Park hot spring outflows from varied geochemical compositions, ranging in pH from < 2 to > 9 and in temperature from < 30°C to > 90°C, were sampled across the photosynthetic fringe, a transition in these outflows from exclusively chemosynthetic microbial communities to those that include photosynthesis. Illumina sequencing was performed to document the diversity of both prokaryotes and eukaryotes above, at, and below the photosynthetic fringe of twelve hot spring systems. Additionally, field measurements of dissolved oxygen, ferrous iron, and total sulfide were combined with laboratory analyses of sulfate, nitrate, total ammonium, dissolved inorganic carbon, dissolved methane, dissolved hydrogen, and dissolved carbon monoxide were used to calculate the available energy from 58 potential metabolisms. Results were ranked to identify those that yield the most energy according to the geochemical conditions of each system. Of the 46 samples taken across twelve systems, all showed the greatest energy yields using oxygen as the main electron acceptor, followed by nitrate. On the other hand, ammonium or ammonia, depending on pH, showed the greatest energy yields as an electron donor, followed by H2S or HS-. While some sequenced taxa reflect potential biotic participants in the sulfur cycle of these hot spring systems, many sample locations that yield the most energy from ammonium/ammonia oxidation have low relative abundances of known ammonium/ammonia oxidizers, indicating potentially untapped sources of chemotrophic energy or perhaps poorly understood metabolic capabilities of cultured chemotrophs.
ContributorsRomero, Joseph Thomas (Author) / Shock, Everett L (Thesis advisor) / Cadillo-Quiroz, Hinsby (Committee member) / Till, Christy B. (Committee member) / Arizona State University (Publisher)
Created2018
Description
Volcanic devolatilization is one of the major processes in the global nitrogen cycle. Past studies have often estimated the magnitude of this flux using volcanic emission measurements, which are limited to currently active systems and sensitive to atmospheric contamination. A different methodological approach requires appropriate analytical parameters for nitrogen analysis in silicate glasses by secondary ion mass spectrometry (SIMS), which have not yet been established. To this end, we analyze various ion implanted basaltic and rhyolitic glasses by SIMS. We demonstrate that water content significantly affects the ion yields of 14N+ and 14N16O−, as well as the background intensity of 14N+ and 12C+. Application of implant-derived calibrations to natural samples provide the first reported concentrations of nitrogen in melt inclusions. These measurements are from samples from the Bishop Tuff in California, the Huckleberry Ridge Tuff of the Yellowstone Volcanic Center, and material from the Okaia and Oruanui eruptions in the Taupo Volcanic Center. In all studied material, we find maximum nitrogen contents of less than 45 ppm and that nitrogen concentration varies positively with CO2 concentration, which is interpreted to reflect partial degassing trend. Using the maximum measured nitrogen contents for each eruption, we find that the Bishop released >3.6 x 1013 g of nitrogen, the Huckleberry Ridge released >1.3 x 1014 g, the Okaia released >1.1 x 1011 g of nitrogen, the Oruanui released >4.7 x 1013 g of nitrogen. Simple calculations suggest that with concentrations such as these, rhyolitic eruptions may ephemerally increase the nitrogen flux to the atmosphere, but are insignificant compared to the 4 x 1021 g of nitrogen stored in the atmosphere.
ContributorsRegier, Margo Elaine (Author) / Hervig, Richard L (Thesis advisor) / Roggensack, Kurt (Committee member) / Till, Christy B. (Committee member) / Arizona State University (Publisher)
Created2016
Description
Impact craters are ubiquitous throughout the Solar System, formed by one of the principal processes responsible for surface modification of terrestrial planets and solid bodies (i.e., asteroids, icy moons). The impact cratering process is well studied, particularly on the Moon and Mercury, where the results remain uncomplicated by atmospheric effects, plate tectonics, or interactions with water and ices. Crater measurements, used to determine relative and absolute ages for geologic units by relating the cumulative crater frequency per unit area to radiometrically-determined ages from returned samples, are sensitive to the solar incidence angle of images used for counts. Earlier work is quantitatively improved by investigating this important effect and showing that absolute model ages are most accurately determined using images with incidence angles between 65° and 80°, and equilibrium crater diameter estimates are most accurate at ~80° incidence angle. A statistical method is developed using crater size-frequencies to distinguish lunar mare age units in the absence of spectral differences. Applied to the Moon, the resulting areal crater densities confidently identify expansive units with >300–500 my age differences, distinguish non-obvious secondaries, and determine that an area >1×104 km2 provides statistically robust crater measurements. This areal crater density method is also applied to the spectrally-homogeneous volcanic northern smooth plains (NSP) on Mercury. Although crater counts and observations of embayed craters indicate that the NSP experienced at least two resurfacing episodes, no observable age units are observed using areal crater density measurements, so smooth plains emplacement occurred over a relatively short timescale (<500 my). For the first time, the distribution of impact melt on Mercury and the Moon are compared at high resolution. Mercurian craters with diameters ≥30 km have a greater areal extent of interior melt deposits than similarly sized lunar craters, a result consistent with melt-generation model predictions. The effects of shaking on compositional sorting within a granular regolith are experimentally tested, demonstrating the possibility of mechanical segregation of particles in the lunar regolith. These results provide at least one explanation toward understanding the inconsistencies between lunar remote sensing datasets and are important for future spacecraft sample return missions.
ContributorsOstrach, Lillian Rose (Author) / Robinson, Mark S (Thesis advisor) / Bell Iii, James F (Committee member) / Christensen, Philip R. (Committee member) / Clarke, Amanda B (Committee member) / Garnero, Edward J (Committee member) / Arizona State University (Publisher)
Created2013
Description
The interior of Earth is stratified due to gravity. Therefore, the lateral heterogeneities observed as seismic anomalies by seismologists are extremely interesting: they hold the key to understand the composition, thermal status and evolution of the Earth. This work investigates seismic anomalies inside Earth’s lowermost mantle and focuses on patch-like ultra-low velocity zones (ULVZs) found on Earth’s core-mantle boundary (CMB). Firstly, all previous ULVZ studies are compiled and ULVZ locations on the CMB are digitized. The result is a database, which is publicly available online. A key finding is that there is not a simple mapping between the locations of the observed ULVZs and the large low velocities provinces (LLVPs). Instead, ULVZs are more likely to occur near LLVP boundaries. This spatial correlation study supports a compositionally distinct origin for at least some ULVZs. Next, the seismic structure of the basal mantle beneath the Central America is investigated. This region hosts present and past subducted slabs, which could have brought compositionally distinct oceanic basalt all the way down to the CMB. The waveform distortions of a core-reflected seismic phase and a forward modeling method are used to constrain the causes of the CMB structures. In addition to ULVZ structures, isolated patches of thin zones with shear velocity increased by over 10% relative to background mantle are found for the first time. Ultra-high velocity zones (UHVZs) are interspersed with ULVZs and could be caused by subducted mid-ocean ridge basalt (MORB) that undergoes partial melting and melt segregation. Fe-rich partial melt of MORB can form ULVZs, and silica polymorphs (SiO2) and calcium-perovskite (CaPv) rich solid residue can explain the UHVZs. Finally, large-scale heterogeneities in the lowermost mantle are investigated using S waveform broadening observations. Several basal layer models are case-studied via synthetic calculations. S wave arrivals received at a distance larger than 80˚ in a global dataset from large earthquakes between the years 1994 and 2017 are examined and S waveform broadenings are documented. This approach exploits large distance data for the first time, and therefore is complementary to previous studies in terms of sampling locations. One possible explanation of S waveform broadening is velocity discontinuity inside the D″ layer due to the temperature controlled Bm-pPv phase transition.
ContributorsYu, Shule (Author) / Garnero, Edward J (Thesis advisor) / Li, Mingming (Committee member) / Shim, Sang-Heon (Committee member) / Tyburczy, James A. (Committee member) / Till, Christy B. (Committee member) / Arizona State University (Publisher)
Created2020