Matching Items (161)
Description
Woven fabric composite materials are widely used in the construction of aircraft engine fan containment systems, mostly due to their high strength to weight ratios and ease of implementation. The development of a predictive model for fan blade containment would provide great benefit to engine manufactures in shortened development cycle time, less risk in certification and fewer dollars lost to redesign/recertification cycles. A mechanistic user-defined material model subroutine has been developed at Arizona State University (ASU) that captures the behavioral response of these fabrics, namely Kevlar® 49, under ballistic loading. Previously developed finite element models used to validate the consistency of this material model neglected the effects of the physical constraints imposed on the test setup during ballistic testing performed at NASA Glenn Research Center (NASA GRC). Part of this research was to explore the effects of these boundary conditions on the results of the numerical simulations. These effects were found to be negligible in most instances. Other material models for woven fabrics are available in the LS-DYNA finite element code. One of these models, MAT234: MAT_VISCOELASTIC_LOOSE_FABRIC (Ivanov & Tabiei, 2004) was studied and implemented in the finite element simulations of ballistic testing associated with the FAA ASU research. The results from these models are compared to results obtained from the ASU UMAT as part of this research. The results indicate an underestimation in the energy absorption characteristics of the Kevlar 49 fabric containment systems. More investigation needs to be performed in the implementation of MAT234 for Kevlar 49 fabric. Static penetrator testing of Kevlar® 49 fabric was performed at ASU in conjunction with this research. These experiments are designed to mimic the type of loading experienced during fan blade out events. The resulting experimental strains were measured using a non-contact optical strain measurement system (ARAMIS).
ContributorsFein, Jonathan (Author) / Rajan, Subramaniam D. (Thesis advisor) / Mobasher, Barzin (Committee member) / Jiang, Hanqing (Committee member) / Arizona State University (Publisher)
Created2012
Description
Dwindling energy resources and associated environmental costs have resulted in a serious need to design and construct energy efficient buildings. One of the strategies to develop energy efficient structural materials is through the incorporation of phase change materials (PCM) in the host matrix. This research work presents details of a finite element-based framework that is used to study the thermal performance of structural precast concrete wall elements with and without a layer of phase change material. The simulation platform developed can be implemented for a wide variety of input parameters. In this study, two different locations in the continental United States, representing different ambient temperature conditions (corresponding to hot, cold and typical days of the year) are studied. Two different types of concrete - normal weight and lightweight, different PCM types, gypsum wallboard's with varying PCM percentages and different PCM layer thicknesses are also considered with an aim of understanding the energy flow across the wall member. Effect of changing PCM location and prolonged thermal loading are also studied. The temperature of the inside face of the wall and energy flow through the inside face of the wall, which determines the indoor HVAC energy consumption are used as the defining parameters. An ad-hoc optimization scheme is also implemented where the PCM thickness is fixed but its location and properties are varied. Numerical results show that energy savings are possible with small changes in baseline values, facilitating appropriate material design for desired characteristics.
ContributorsHembade, Lavannya Babanrao (Author) / Neithalath, Narayanan (Thesis advisor) / Rajan, Subramaniam D. (Thesis advisor) / Mobasher, Barzin (Committee member) / Arizona State University (Publisher)
Created2012
Description
The life and pedagogy of Saburo Sumi (1902-1984) has had a major influence on the violin world, particularly in Japan. Born of humble origins and lacking any formal musical training until his adulthood, Sumi nevertheless rose to become one of the most important violin pedagogues of Japan. His non-traditional musical background had a profound effect on the teacher he became and contributed to his tremendous success as a pedagogue. Since most of the existing information on Sumi is written in Japanese, this study is designed to acquaint the Western reader with this amazing pedagogue. The information for this study was gathered through books, articles, and documents related to his life as well as the writer's personal experiences with the Sumi family.
ContributorsHayashi, Junko (Author) / McLin, Katherine (Thesis advisor) / Hill, Gary (Committee member) / Holbrook, Amy (Committee member) / Arizona State University (Publisher)
Created2012
Description
American music of late-nineteenth and early twentieth centuries represents some of the first mature achievements in classical music written by American composers.John Knowles Paine (1839-1906), Arthur Foote (1853-1937), George Whitefield Chadwick (1854-1931), Horatio Parker (1868-1919), and Amy Beach (1867-1944) from the Second New England School were among the most prominent musical figures in America during this time period. These composers shared similar compositional characteristics, perhaps due to the profound influences of German Romantic tradition, either through their direct study with musicians in Germany or with professional German-trained musicians in America.They were active in Boston, affiliated with important music organizations, and had publications through A. P. Schmidt, the most important music publisher of that time. Piano chamber music of the Second New England School is a small but important portion of their diverse repertoire. It is generally considered the first successful body of such repertoire by American composers. Even though most of these works were premiered to great acclaim during the composers' lifetimes, many of them no longer have place in current recital programs and very few are available to the public in published or recorded form. The purpose of this study is to reintroduce this important and worthwhile literature to today's audience. For the purpose of this study the repertoire will be limited to music that involves at least three performers, one of whom must be a pianist. The repertoire must be originally composed for a piano chamber group and must have been published or performed at least once during the composer's lifetime. While Edward MacDowell (1860-1908) is generally considered a member of the Second New England School, he surprisingly did not write any piano chamber music, and therefore has no works in this study. This research project will provide general background information about each composer and their piano chamber music, and a closer examination of one particularly representative work or movement, including performance guidelines from the collaborative pianist's point of view. The author's hope is to awaken greater curiosity about this rich repertoire and to increase its presence on the concert stage.
ContributorsHsu, Juiling (Author) / Campbell, Andrew (Thesis advisor) / Micklich, Albert (Committee member) / Holbrook, Amy (Committee member) / Ryan, Russell (Committee member) / Arizona State University (Publisher)
Created2012
Description
Alkali-activated aluminosilicates, commonly known as "geopolymers", are being increasingly studied as a potential replacement for Portland cement. These binders use an alkaline activator, typically alkali silicates, alkali hydroxides or a combination of both along with a silica-and-alumina rich material, such as fly ash or slag, to form a final product with properties comparable to or better than those of ordinary Portland cement. The kinetics of alkali activation is highly dependent on the chemical composition of the binder material and the activator concentration. The influence of binder composition (slag, fly ash or both), different levels of alkalinity, expressed using the ratios of Na2O-to-binders (n) and activator SiO2-to-Na2O ratios (Ms), on the early age behavior in sodium silicate solution (waterglass) activated fly ash-slag blended systems is discussed in this thesis. Optimal binder composition and the n values are selected based on the setting times. Higher activator alkalinity (n value) is required when the amount of slag in the fly ash-slag blended mixtures is reduced. Isothermal calorimetry is performed to evaluate the early age hydration process and to understand the reaction kinetics of the alkali activated systems. The differences in the calorimetric signatures between waterglass activated slag and fly ash-slag blends facilitate an understanding of the impact of the binder composition on the reaction rates. Kinetic modeling is used to quantify the differences in reaction kinetics using the Exponential as well as the Knudsen method. The influence of temperature on the reaction kinetics of activated slag and fly ash-slag blends based on the hydration parameters are discussed. Very high compressive strengths can be obtained both at early ages as well as later ages (more than 70 MPa) with waterglass activated slag mortars. Compressive strength decreases with the increase in the fly ash content. A qualitative evidence of leaching is presented through the electrical conductivity changes in the saturating solution. The impact of leaching and the strength loss is found to be generally higher for the mixtures made using a higher activator Ms and a higher n value. Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) is used to obtain information about the reaction products.
ContributorsChithiraputhiran, Sundara Raman (Author) / Neithalath, Narayanan (Thesis advisor) / Rajan, Subramaniyam D (Committee member) / Mobasher, Barzin (Committee member) / Arizona State University (Publisher)
Created2012
Description
Properties of random porous material such as pervious concrete are strongly dependant on its pore structure features. This research deals with the development of an understanding of the relationship between the material structure and the mechanical and functional properties of pervious concretes. The fracture response of pervious concrete specimens proportioned for different porosities, as a function of the pore structure features and fiber volume fraction, is studied. Stereological and morphological methods are used to extract the relevant pore structure features of pervious concretes from planar images. A two-parameter fracture model is used to obtain the fracture toughness (KIC) and critical crack tip opening displacement (CTODc) from load-crack mouth opening displacement (CMOD) data of notched beams under three-point bending. The experimental results show that KIC is primarily dependent on the porosity of pervious concretes. For a similar porosity, an increase in pore size results in a reduction in KIC. At similar pore sizes, the effect of fibers on the post-peak response is more prominent in mixtures with a higher porosity, as shown by the residual load capacity, stress-crack extension relationships, and GR curves. These effects are explained using the mean free spacing of pores and pore-to-pore tortuosity in these systems. A sensitivity analysis is employed to quantify the influence of material design parameters on KIC. This research has also focused on studying the relationship between permeability and tortuosity as it pertains to porosity and pore size of pervious concretes. Various ideal geometric shapes were also constructed that had varying pore sizes and porosities. The pervious concretes also had differing pore sizes and porosities. The permeabilities were determined using three different methods; Stokes solver, Lattice Boltzmann method and the Katz-Thompson equation. These values were then compared to the tortuosity values determined using a Matlab code that uses a pore connectivity algorithm. The tortuosity was also determined from the inverse of the conductivity determined from a numerical analysis that was necessary for using the Katz-Thompson equation. These tortuosity values were then compared to the permeabilities. The pervious concretes and ideal geometric shapes showed consistent similarities betbetween their tortuosities and permeabilities.
ContributorsRehder, Benjamin (Author) / Neithalath, Narayanana (Thesis advisor) / Mobasher, Barzin (Committee member) / Rajan, Subramaniam D. (Committee member) / Arizona State University (Publisher)
Created2013
Description
Buildings consume a large portion of the world's energy, but with the integration of phase change materials (PCMs) in building elements this energy cost can be greatly reduced. The addition of PCMs into building elements, however, becomes a challenge to model and analyze how the material actually affects the energy flow and temperatures in the system. This research work presents a comprehensive computer program used to model and analyze PCM embedded wall systems. The use of the finite element method (FEM) provides the tool to analyze the energy flow of these systems. Finite element analysis (FEA) can model the transient analysis of a typical climate cycle along with nonlinear problems, which the addition of PCM causes. The use of phase change materials is also a costly material expense. The initial expense of using PCMs can be compensated by the reduction in energy costs it can provide. Optimization is the tool used to determine the optimal point between adding PCM into a wall and the amount of energy savings that layer will provide. The integration of these two tools into a computer program allows for models to be efficiently created, analyzed and optimized. The program was then used to understand the benefits between two different wall models, a wall with a single layer of PCM or a wall with two different PCM layers. The effect of the PCMs on the inside wall temperature along with the energy flow across the wall are computed. The numerical results show that a multi-layer PCM wall was more energy efficient and cost effective than the single PCM layer wall. A structural analysis was then performed on the optimized designs using ABAQUS v. 6.10 to ensure the structural integrity of the wall was not affected by adding PCM layer(s).
ContributorsStockwell, Amie (Author) / Rajan, Subramaniam D. (Thesis advisor) / Neithalath, Narayanan (Thesis advisor) / Mobasher, Barzin (Committee member) / Arizona State University (Publisher)
Created2013
Description
The alkali activation of aluminosilicate materials as binder systems derived from industrial byproducts have been extensively studied due to the advantages they offer in terms enhanced material properties, while increasing sustainability by the reuse of industrial waste and byproducts and reducing the adverse impacts of OPC production. Fly ash and ground granulated blast furnace slag are commonly used for their content of soluble silica and aluminate species that can undergo dissolution, polymerization with the alkali, condensation on particle surfaces and solidification. The following topics are the focus of this thesis: (i) the use of microwave assisted thermal processing, in addition to heat-curing as a means of alkali activation and (ii) the relative effects of alkali cations (K or Na) in the activator (powder activators) on the mechanical properties and chemical structure of these systems. Unsuitable curing conditions instigate carbonation, which in turn lowers the pH of the system causing significant reductions in the rate of fly ash activation and mechanical strength development. This study explores the effects of sealing the samples during the curing process, which effectively traps the free water in the system, and allows for increased aluminosilicate activation. The use of microwave-curing in lieu of thermal-curing is also studied in order to reduce energy consumption and for its ability to provide fast volumetric heating. Potassium-based powder activators dry blended into the slag binder system is shown to be effective in obtaining very high compressive strengths under moist curing conditions (greater than 70 MPa), whereas sodium-based powder activation is much weaker (around 25 MPa). Compressive strength decreases when fly ash is introduced into the system. Isothermal calorimetry is used to evaluate the early hydration process, and to understand the reaction kinetics of the alkali powder activated systems. A qualitative evidence of the alkali-hydroxide concentration of the paste pore solution through the use of electrical conductivity measurements is also presented, with the results indicating the ion concentration of alkali is more prevalent in the pore solution of potassium-based systems. The use of advanced spectroscopic and thermal analysis techniques to distinguish the influence of studied parameters is also discussed.
ContributorsChowdhury, Ussala (Author) / Neithalath, Narayanan (Thesis advisor) / Rajan, Subramanium D. (Committee member) / Mobasher, Barzin (Committee member) / Arizona State University (Publisher)
Created2013
Description
Legislative changes and discussions about the United States falling further and further behind other nations in science, technology, engineering, and math (STEM) achievement are growing. As they grow, STEM instruction in elementary school has earned its place as a national area of interest in education. In the case of Ivory School District, teachers are being asked to radically change their daily practices by consistently implementing inquiry-based STEM experiences in their classrooms. As such, teachers are being asked to scale a divide between the district expectations and their knowledge and experience. Many fourth grade educators are teachers who have been trained as generalists and typically do not have specific background or experience in the philosophy, instructional strategies, or content associated with STEM. Using a prototype approach, this study aims to understand how such teachers conceptualize STEM instruction and the relationship between their experience and conceptions.
ContributorsKenney, Meghan (Author) / Fischman, Gustavo (Thesis advisor) / Powers, Jeanne (Committee member) / Rasch, Katherine D (Committee member) / Arizona State University (Publisher)
Created2013
Description
Examining the elements of the hidden curriculum in theatre education allows theatre educators the opportunity to reflect on their own pedagogy and its effects on the learner. The hidden curriculum refers to the unspoken or implicit values, norms, and beliefs that are transmitted through tacit messages. When the hidden curriculum remains veiled, the impact on the learner's education and socialization process can perpetuate gender, race, and class inequalities. In order to understand how the hidden curriculum manifests itself in theatre classrooms, we have to look at schools as "agents of legitimation, organized to produce and reproduce the dominant categories, values, and social relationships necessary for the maintenance of the larger society" (Giroux, 1983, p. 72). This qualitative study examined the hidden curriculum in theatre at the secondary level and looked at theatre teachers' pedagogy in reproducing elements of the hidden curriculum. Interviews, naturalistic observation, and a researcher reflective journal were employed in the data collection process to better understand: a) the elements of hidden curriculum that appear in theatre education at the secondary level, b) how the pedagogical practices of theatre teachers support societal structures, and c) how the hidden curriculum in theatre reinforces gender, race, and social class distinctions. Data were then coded and analyzed to find emergent themes. Multiple theoretical perspectives serve as a conceptual framework for understanding the hidden curriculum, and provide a neglected perspective of the hidden curriculum in theatre education. The theatre classroom provides a unique space to view hidden curriculum and can be viewed as a unique agent of social change. Themes related to the first research question emerged as: a) privileges for older students, b) school rules, c) respect for authority, d) acceptance of repetitive tasks, and c) punctuality. Themes related to the second research question emerged as: a) practices, b) procedures, c) rules, d) relationships, and e) structures. Finally, themes related to the third question emerged as: a) reinforcement of social inequality, b) perpetuation of class structure, and c) acceptance of social destiny. The discussion looks at the functions of theatre pedagogy in the reproduction of class, inequality, and institutionalized cultural norms.
ContributorsHines, Angela R (Author) / Saldana, Johnny (Thesis advisor) / Malewski, Erik (Committee member) / Fischman, Gustavo (Committee member) / Arizona State University (Publisher)
Created2013