Matching Items (33)
Description
Solar system orbital dynamics can offer unique challenges. Impacts of interplanetary dust particles can significantly alter the surfaces of icy satellites and minor planets. Impact heating from these particles can anneal away radiation damage to the crystalline structure of surface water ice. This effect is enhanced by gravitational focusing for giant planet satellites. In addition, impacts of interplanetary dust particles on the small satellites of the Pluto system can eject into the system significant amounts of secondary intra-satellite dust. This dust is primarily swept up by Pluto and Charon, and could explain the observed albedo features on Pluto's surface. In addition to Pluto, a large fraction of trans-neptunian objects (TNOs) are binary or multiple systems. The mutual orbits of these TNO binaries can range from very wide (periods of several years) to near-contact systems (less than a day period). No single formation mechanism can explain this distribution. However, if the systems generally formed wide, a combination of solar and body tides (commonly called Kozai Cycles-Tidal Friction, KCTF) can cause most systems to tighten sufficiently to explain the observed distributions. This KCTF process can also be used to describe the orbital evolution of a terrestrial-class exoplanet after being captured as a satellite of a habitable-zone giant exoplanet. The resulting exomoon would be both potentially habitable and potenially detectable in the full Kepler data set.
ContributorsPorter, Simon Bernard (Author) / Desch, Steven (Thesis advisor) / Zolotov, Mikhail (Committee member) / Timmes, Francis (Committee member) / Scannapieco, Evan (Committee member) / Robinson, Mark (Committee member) / Arizona State University (Publisher)
Created2013
Description
The taxonomic and metabolic profile of the microbial community inhabiting a natural system is largely determined by the physical and geochemical properties of the system. However, the influences of parameters beyond temperature, pH and salinity have been poorly analyzed with few studies incorporating the comprehensive suite of physical and geochemical measurements required to fully investigate the complex interactions known to exist between biology and the environment. Further, the techniques used to classify the taxonomic and functional composition of a microbial community are fragmented and unwieldy, resulting in unnecessarily complex and often non-consilient results.
This dissertation integrates environmental metagenomes with extensive geochemical metadata for the development and application of multidimensional biogeochemical metrics. Analysis techniques including a Markov cluster-based evolutionary distance between whole communities, oligonucleotide signature-based taxonomic binning and principal component analysis of geochemical parameters allow for the determination of correlations between microbial community dynamics and environmental parameters. Together, these techniques allow for the taxonomic classification and functional analysis of the evolution of hot spring communities. Further, these techniques provide insight into specific geochemistry-biology interactions which enable targeted analyses of community taxonomic and functional diversity. Finally, analysis of synonymous substitution rates among physically separated microbial communities provides insights into microbial dispersion patterns and the roles of environmental geochemistry and community metabolism on DNA transfer among hot spring communities.
The data presented here confirms temperature and pH as the primary factors shaping the evolutionary trajectories of microbial communities. However, the integration of extensive geochemical metadata reveals new links between geochemical parameters and the distribution and functional diversification of communities. Further, an overall geochemical gradient (from multivariate analyses) between natural systems provides one of the most complete predictions of microbial community functional composition and inter-community DNA transfer rates. Finally, the taxonomic classification and clustering techniques developed within this dissertation will facilitate future genomic and metagenomic studies through enhanced community profiling obtainable via Markov clustering, longer oligonucleotide signatures and insight into PCR primer biases.
This dissertation integrates environmental metagenomes with extensive geochemical metadata for the development and application of multidimensional biogeochemical metrics. Analysis techniques including a Markov cluster-based evolutionary distance between whole communities, oligonucleotide signature-based taxonomic binning and principal component analysis of geochemical parameters allow for the determination of correlations between microbial community dynamics and environmental parameters. Together, these techniques allow for the taxonomic classification and functional analysis of the evolution of hot spring communities. Further, these techniques provide insight into specific geochemistry-biology interactions which enable targeted analyses of community taxonomic and functional diversity. Finally, analysis of synonymous substitution rates among physically separated microbial communities provides insights into microbial dispersion patterns and the roles of environmental geochemistry and community metabolism on DNA transfer among hot spring communities.
The data presented here confirms temperature and pH as the primary factors shaping the evolutionary trajectories of microbial communities. However, the integration of extensive geochemical metadata reveals new links between geochemical parameters and the distribution and functional diversification of communities. Further, an overall geochemical gradient (from multivariate analyses) between natural systems provides one of the most complete predictions of microbial community functional composition and inter-community DNA transfer rates. Finally, the taxonomic classification and clustering techniques developed within this dissertation will facilitate future genomic and metagenomic studies through enhanced community profiling obtainable via Markov clustering, longer oligonucleotide signatures and insight into PCR primer biases.
ContributorsAlsop, Eric Bennie (Author) / Raymond, Jason (Thesis advisor) / Anbar, Ariel (Committee member) / Farmer, Jack (Committee member) / Shock, Everett (Committee member) / Walker, Sarah (Committee member) / Arizona State University (Publisher)
Created2014
Description
A new analytical method is proposed for measuring the deuterium to hydrogen ratio (D/H) of non-stoichiometric water in hydrous minerals via pyrolysis facilitated gas-chromatography - isotope ratio mass spectrometry (GC-IRMS). Previously published analytical methods have reported a poorly understood nonlinear dependence of D/H on sample size, for which any accurate correction is difficult. This sample size effect been variously attributed to kinetic isotope fractionation within the mass spectrometer and peripheral instruments, ion source linearity issues, and an unstable H_3^+-factor or incorrect H_3^+-factor calculations. The cause of the sample size effect is here identified by examinations of individual chromatograms as well as bulk data from chromatographic peaks. It is here determined that it is primarily an artifact of the calculations employed by the manufacturer's computer program, used to both monitor the functions of the mass spectrometer and to collect data. Ancillary causes of the sample size effect include a combination of persistent background interferences and chromatographic separation of the isotopologues of molecular hydrogen. Previously published methods are evaluated in light of these findings. A new method of H_3^+-factor and D/H calculation is proposed which makes portions of the Isodat software as well as other published calculation methods unnecessary. Using this new method, D/H is measured in non-stoichiometric water in chert from the Cretaceous Edwards Group, Texas, as well as the Precambrian Kromberg Formation, South Africa, to assess hydrological conditions as well as to estimate the maximum average surface temperature during precipitation of the chert. Data from Cretaceous chert are consistent with previously published data and interpretations, based upon conventional analyses of large samples. Data from Precambrian chert are consistent with maximum average surface temperatures approaching 65°C during the Archean, instead of the much lower temperatures derived from erroneous methods of sample preparation and analysis. D/H is likewise measured in non-stoichiometric water in silicified basalt from the Precambrian Hooggenoeg Complex, South Africa. Data are shown to be consistent with D/H of the Archean ocean similar to present day values.
ContributorsSheehan, Michael Robert (Author) / Knauth, Leroy P (Thesis advisor) / Anbar, Ariel (Committee member) / Farmer, Jack (Committee member) / Arizona State University (Publisher)
Created2011
Description
The spectacular geological panoramas of Grand Canyon National Park (GCNP) motivate the curiosity of visitors about geology. However, there is little research on how well these visitors understand the basic geologic principles on display in the Canyon walls. The new Trail of Time (ToT) interpretative exhibit along the South Rim uses Grand Canyon vistas to teach these principles. Now being visited by thousands daily, the ToT is a uniquely valuable setting for research on informal learning of geologic time and other basic geologic concepts. At the ToT, visitors are not only asked to comprehend a linear timeline, but to associate it with the strata exposed in the walls of the Canyon. The research addressed two primary questions: (1) how do visitors of the National Park use elements of the geologic landscape of the Grand Canyon to explain fundamental principles of relative geologic time? and (2) how do visitors reconcile the relationship between the horizontal ToT timeline and the vertical encoding of time in the strata exposed in the Canyon walls? Semi-structured interviews tracked participants' understanding of the ToT exhibit and of basic principles of geologic time. Administering the verbal analysis method of Chi (1997) to the interview transcripts, the researcher identified emergent themes related to how the respondents utilized the landscape to answer interview questions. Results indicate that a majority of respondents are able to understand principles of relative geologic time by utilizing both the observed and inferred landscape of Grand Canyon. Results also show that by applying the same integrated approach to the landscape, a majority of respondents are able to reconcile stratigraphic time with the horizontal ToT timeline. To gain deeper insight into the cognitive skills activated to correctly understand geologic principles the researcher used Dodick and Orion's application of Montangero's (1996) diachronic thinking model to code responses into three schemes: (1) transformation, (2) temporal organization, and (3) interstage linkage. Results show that correct responses required activation of the temporal organization scheme or the more advanced interstage linkage scheme. Appropriate application of these results can help inform the development of future outdoor interpretive geoscience exhibits.
ContributorsFrus, Rebecca (Author) / Semken, Steven (Thesis advisor) / Baker, Dale (Committee member) / Farmer, Jack (Committee member) / Arizona State University (Publisher)
Created2011
Description
Affect is a domain of psychology that includes attitudes, emotions, interests, and values. My own affect influenced the choice of topics for my dissertation. After examining asteroid interiors and the Moon’s thermal evolution, I discuss the role of affect in online science education. I begin with asteroids, which are collections of smaller objects held together by gravity and possibly cohesion. These “rubble-pile” objects may experience the Brazil Nut Effect (BNE). When a collection of particles of similar densities, but of different sizes, is shaken, smaller particles will move parallel to the local gravity vector while larger objects will do the opposite. Thus, when asteroids are shaken by impacts, they may experience the BNE as possibly evidenced by large boulders seen on their surfaces. I found while the BNE is plausible on asteroids, it is confined to only the outer layers. The Moon, which formed with a Lunar Magma Ocean (LMO), is the next topic of this work. The LMO is due to the Moon forming rapidly after a giant impact between the proto-Earth and another planetary body. The first 80% of the LMO solidified rapidly at which point a floatation crust formed and slowed solidification of the remaining LMO. Impact bombardment during this cooling process, while an important component, has not been studied in detail. Impacts considered here are from debris generated during the formation of the Moon. I developed a thermal model that incorporates impacts and find that impacts may have either expedited or delayed LMO solidification. Finally, I return to affect to consider the differences in attitudes towards science between students enrolled in fully-online degree programs and those enrolled in traditional, in-person degree programs. I analyzed pre- and post-course survey data from the online astrobiology course Habitable Worlds. Unlike their traditional program counterparts, students enrolled in online programs started the course with better attitudes towards science and also further changed towards more positive attitudes during the course. Along with important conclusions in three research fields, this work aims to demonstrate the importance of affect in both scientific research and science education.
ContributorsDingatantrige Perera, Jude Viranga (Author) / Asphaug, Erik (Thesis advisor) / Semken, Steven (Thesis advisor) / Anbar, Ariel (Committee member) / Elkins-Tanton, Linda T. (Committee member) / Robinson, Mark (Committee member) / Arizona State University (Publisher)
Created2017
Description
A robotic exploration mission that would enter a lunar pit to characterize the environment is described. A hopping mechanism for the robot's mobility is proposed. Various methods of hopping drawn from research literature are discussed in detail. The feasibilities of mechanical, electric, fluid, and combustive methods are analyzed. Computer simulations show the mitigation of the risk of complex autonomous navigation systems. A mechanical hopping mechanism is designed to hop in Earth gravity and carry a payload half its mass. A physical experiment is completed and proves a need for further refinement of the prototype design. Future work is suggested to continue exploring hopping as a mobility method for the lunar robot.
ContributorsMcKinney, Tyler James (Author) / Thangavelautham, Jekan (Thesis director) / Robinson, Mark (Committee member) / Asphaug, Erik (Committee member) / Barrett, The Honors College (Contributor) / Mechanical and Aerospace Engineering Program (Contributor)
Created2015-05
Description
Finding life beyond Earth could change our understanding of life and habitability. The best place to look for life beyond Earth is Jupiter's moon, Europa. It has been estimated Europa may have a liquid, salt-water subsurface with 2 to 3 times the volume of all Earth's oceans. Knowing that all life requires water, it is in our best interest to explore Europa. This thesis explored the plausibility of life on Europa in four of its environments: on the surface, under the ice shell, in the liquid subsurface, and at the bottom of the liquid subsurface. Each of these environments were defined from science literature and compared to known Earth analogs. Europa's surface is not likely to support life, as there is not liquid water present. There is also extremely high radiation bombardment and extremely low surface temperatures that are estimated to be well out of the range for supporting life. It is more plausible that life could be under Europa's ice shell than on the surface. Under the surface, radiation exposure dramatically reduces. Researchers have found organisms on Earth that can live in similar environments as Europa's ice as well. These organisms require some interaction with liquid water though. Uncertainties about Europa's ice shell thickness and radiation load per depth it experiences, as well as there being limited research on organisms in ice environments, hinder us from definitively assessing the plausibility of life under the surface. The best environment on Europa to look for life on Europa is the subsurface. There remain a lot of uncertainties about the subsurface, however, that make it difficult to assess the plausibility of finding life. These uncertainties include its depth, water activity, salinity, temperature, pressure, and structure. This subsurface may be suitable for life, but until we can further understand the environment of the subsurface, we cannot make definite conclusions. As for assessing the plausibility of life at the bottom of Europa's subsurface, there is not much we know about this environment either. It has been suggested there may be hydrothermal vents, but no evidence has either supported or rejected this idea. Without a clear understanding of the environment at the bottom of the subsurface, the plausibility of life here cannot be definitively answered. It is apparent we need to further study Europa. In particular, we need to focus on understanding the subsurface. When the subsurface is better defined, we can better assess the plausibility of life being present. Fortunately, both NASA and the ESA are currently planning missions to Europa that are scheduled to launch in the 2020s.
ContributorsHoward, Cheyenne Whiffen (Author) / Farmer, Jack (Thesis director) / Shock, Everett (Committee member) / School of Earth and Space Exploration (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
Understanding the structural evolution of planetary surfaces provides key insights to their physical properties and processes. On the Moon, large-scale tectonism was thought to have ended over a billion years ago. However, new Lunar Reconnaissance Orbiter Camera (LROC) Narrow Angle Camera (NAC) high resolution images show the Moon’s surface in unprecedented detail and show many previously unidentified tectonic landforms, forcing a re-assessment of our views of lunar tectonism. I mapped lobate scarps, wrinkle ridges, and graben across Mare Frigoris – selected as a type area due to its excellent imaging conditions, abundance of tectonic landforms, and range of inferred structural controls. The distribution, morphology, and crosscutting relationships of these newly identified populations of tectonic landforms imply a more complex and longer-lasting history of deformation that continues to today. I also performed additional numerical modeling of lobate scarp structures that indicates the upper kilometer of the lunar surface has experienced 3.5-18.6 MPa of differential stress in the recent past, likely due to global compression from radial thermal contraction.
Central pit craters on Mars are another instance of intriguing structures that probe subsurface physical properties. These kilometer-scale pits are nested in the centers of many impact craters on Mars as well as on icy satellites. They are inferred to form in the presence of a water-ice rich substrate; however, the process(es) responsible for their formation is still debated. Previous models invoke origins by either explosive excavation of potentially water-bearing crustal material, or by subsurface drainage of meltwater and/or collapse. I assessed radial trends in grain size around central pits using thermal inertias calculated from Thermal Emission Imaging System (THEMIS) thermal infrared images. Average grain size decreases with radial distance from pit rims – consistent with pit-derived ejecta but not expected for collapse models. I present a melt-contact model that might enable a delayed explosion, in which a central uplift brings ice-bearing substrate into contact with impact melt to generate steam explosions and excavate central pits during the impact modification stage.
Central pit craters on Mars are another instance of intriguing structures that probe subsurface physical properties. These kilometer-scale pits are nested in the centers of many impact craters on Mars as well as on icy satellites. They are inferred to form in the presence of a water-ice rich substrate; however, the process(es) responsible for their formation is still debated. Previous models invoke origins by either explosive excavation of potentially water-bearing crustal material, or by subsurface drainage of meltwater and/or collapse. I assessed radial trends in grain size around central pits using thermal inertias calculated from Thermal Emission Imaging System (THEMIS) thermal infrared images. Average grain size decreases with radial distance from pit rims – consistent with pit-derived ejecta but not expected for collapse models. I present a melt-contact model that might enable a delayed explosion, in which a central uplift brings ice-bearing substrate into contact with impact melt to generate steam explosions and excavate central pits during the impact modification stage.
ContributorsWilliams, Nathan Robert (Author) / Bell, James (Thesis advisor) / Robinson, Mark (Committee member) / Christenen, Philip (Committee member) / Farmer, Jack (Committee member) / Shirzaei, Manoochehr (Committee member) / Arizona State University (Publisher)
Created2016
Description
On Mars, sedimentary deposits reveal a complex history of water- and wind-related geologic processes. Central mounds – kilometer-scale stacks of sediment located within craters – occur across Mars, but the specific processes responsible for mound formation and subsequent modification are still uncertain. A survey of central mounds within large craters was conducted. Mound locations, mound offsets within their host craters, and relative mound heights were used to address various mound formation hypotheses. The results suggest that mound sediments once filled their host craters and were later eroded into the features observed today. Mounds offsets from the center of their host crater imply that wind caused the erosion of central mounds. An in depth study of a single central mound (Mt. Sharp within Gale crater) was also conducted. Thermal Emission Imaging System Visible Imaging Subsystem (THEMIS-VIS) mosaics in grayscale and false color were used to characterize the morphology and color variations in and around Gale crater. One result of this study is that dunes within Gale crater vary in false color composites from blue to purple, and that these color differences may be due to changes in dust cover, grain size, and/or composition. To further investigate dune fields on Mars, albedo variations at eight dune fields were studied based on the hypothesis that a dune’s ripple migration rate is correlated to its albedo. This study concluded that a dune’s minimum albedo does not have a simple correlation with its ripple migration rate. Instead, dust devils remove dust on slow-moving and immobile dunes, whereas saltating sand caused by strong winds removes dust on faster-moving dunes.
On the Moon, explosive volcanic deposits within Oppenheimer crater that were emplaced ballistically were investigated. Lunar Reconnaissance Orbiter (LRO) Diviner Radiometer mid-infrared data, LRO Camera images, and Chandrayaan-1 orbiter Moon Mineralogy Mapper near-infrared spectra were used to test the hypothesis that the pyroclastic deposits in Oppenheimer crater were emplaced via Vulcanian activity by constraining their composition and mineralogy. The mineralogy and iron-content of the pyroclastic deposits vary significantly (including examples of potentially very high iron compositions), which indicates variability in eruption style. These results suggest that localized lunar pyroclastic deposits may have a more complex origin and mode of emplacement than previously thought.
On the Moon, explosive volcanic deposits within Oppenheimer crater that were emplaced ballistically were investigated. Lunar Reconnaissance Orbiter (LRO) Diviner Radiometer mid-infrared data, LRO Camera images, and Chandrayaan-1 orbiter Moon Mineralogy Mapper near-infrared spectra were used to test the hypothesis that the pyroclastic deposits in Oppenheimer crater were emplaced via Vulcanian activity by constraining their composition and mineralogy. The mineralogy and iron-content of the pyroclastic deposits vary significantly (including examples of potentially very high iron compositions), which indicates variability in eruption style. These results suggest that localized lunar pyroclastic deposits may have a more complex origin and mode of emplacement than previously thought.
ContributorsBennett, Kristen Alicia (Author) / Bell, James F. (Thesis advisor) / Christensen, Phillip (Committee member) / Clarke, Amanda (Committee member) / Robinson, Mark (Committee member) / Whipple, Kelin (Committee member) / Arizona State University (Publisher)
Created2016
Description
The search for life on Mars is a major NASA priority. A Mars Sample Return
(MSR) mission, Mars 2020, will be NASA's next step towards this goal, carrying an instrument suite that can identify samples containing potential biosignatures. Those samples will be later returned to Earth for detailed analysis. This dissertation is intended to inform strategies for fossil biosignature detection in Mars analog samples targeted for their high biosignature preservation potential (BPP) using in situ rover-based instruments. In chapter 2, I assessed the diagenesis and BPP of one relevant analog habitable Martian environment: a playa evaporite sequence within the Verde Formation, Arizona. Coupling outcrop-scale observations with laboratory analyses, results revealed four diagenetic pathways, each with distinct impacts on BPP. When MSR occurs, the sample mass returned will be restricted, highlighting the importance of developing instruments that can select the most promising samples for MSR. Raman spectroscopy is one favored technique for this purpose. Three Raman instruments will be sent onboard two upcoming Mars rover missions for the first time. In chapters 3-4, I investigated the challenges of Raman to identify samples for MSR. I examined two Raman systems, each optimized in a different way to mitigate a major problem commonly suffered by Raman instruments: background fluorescence. In Chapter 3, I focused on visible laser excitation wavelength (532 nm) gated (or time-resolved Raman, TRR) spectroscopy. Results showed occasional improvement over conventional Raman for mitigating fluorescence in samples. It was hypothesized that results were wavelength-dependent and that greater fluorescence reduction was possible with UV laser excitation. In Chapter 4, I tested this hypothesis with a time-resolved UV (266 nm) gated Raman and UV fluorescence spectroscopy capability. I acquired Raman and fluorescence data sets on samples and showed that the UV system enabled identifications of minerals and biosignatures in samples with high confidence. The results obtained in this dissertation may inform approaches for MSR by: (1) refining models for biosignature preservation in habitable Mars environments; (2) improving sample selection and caching strategies, which may increase the success of Earth-based biogenicity studies; and (3) informing the development of Raman instruments for upcoming rover-based missions.
(MSR) mission, Mars 2020, will be NASA's next step towards this goal, carrying an instrument suite that can identify samples containing potential biosignatures. Those samples will be later returned to Earth for detailed analysis. This dissertation is intended to inform strategies for fossil biosignature detection in Mars analog samples targeted for their high biosignature preservation potential (BPP) using in situ rover-based instruments. In chapter 2, I assessed the diagenesis and BPP of one relevant analog habitable Martian environment: a playa evaporite sequence within the Verde Formation, Arizona. Coupling outcrop-scale observations with laboratory analyses, results revealed four diagenetic pathways, each with distinct impacts on BPP. When MSR occurs, the sample mass returned will be restricted, highlighting the importance of developing instruments that can select the most promising samples for MSR. Raman spectroscopy is one favored technique for this purpose. Three Raman instruments will be sent onboard two upcoming Mars rover missions for the first time. In chapters 3-4, I investigated the challenges of Raman to identify samples for MSR. I examined two Raman systems, each optimized in a different way to mitigate a major problem commonly suffered by Raman instruments: background fluorescence. In Chapter 3, I focused on visible laser excitation wavelength (532 nm) gated (or time-resolved Raman, TRR) spectroscopy. Results showed occasional improvement over conventional Raman for mitigating fluorescence in samples. It was hypothesized that results were wavelength-dependent and that greater fluorescence reduction was possible with UV laser excitation. In Chapter 4, I tested this hypothesis with a time-resolved UV (266 nm) gated Raman and UV fluorescence spectroscopy capability. I acquired Raman and fluorescence data sets on samples and showed that the UV system enabled identifications of minerals and biosignatures in samples with high confidence. The results obtained in this dissertation may inform approaches for MSR by: (1) refining models for biosignature preservation in habitable Mars environments; (2) improving sample selection and caching strategies, which may increase the success of Earth-based biogenicity studies; and (3) informing the development of Raman instruments for upcoming rover-based missions.
ContributorsShkolyar, Svetlana (Author) / Farmer, Jack (Thesis advisor) / Semken, Steven (Committee member) / Sharp, Thomas (Committee member) / Shim, Sang-Heon Dan (Committee member) / Youngbull, Aaron Cody (Committee member) / Arizona State University (Publisher)
Created2016