A novel concept for integration of flame-assisted fuel cells (FFC) with a gas turbine is analyzed in this paper. Six different fuels (CH4, C3H8, JP-4, JP-5, JP-10(L), and H2) are investigated for the analytical model of the FFC integrated gas turbine hybrid system. As equivalence ratio increases, the efficiency of the hybrid system increases initially then decreases because the decreasing flow rate of air begins to outweigh the increasing hydrogen concentration. This occurs at an equivalence ratio of 2 for CH4. The thermodynamic cycle is analyzed using a temperature entropy diagram and a pressure volume diagram. These thermodynamic diagrams show as equivalence ratio increases, the power generated by the turbine in the hybrid setup decreases. Thermodynamic analysis was performed to verify that energy is conserved and the total chemical energy going into the system was equal to the heat rejected by the system plus the power generated by the system. Of the six fuels, the hybrid system performs best with H2 as the fuel. The electrical efficiency with H2 is predicted to be 27%, CH4 is 24%, C3H8 is 22%, JP-4 is 21%, JP-5 is 20%, and JP-10(L) is 20%. When H2 fuel is used, the overall integrated system is predicted to be 24.5% more efficient than the standard gas turbine system. The integrated system is predicted to be 23.0% more efficient with CH4, 21.9% more efficient with C3H8, 22.7% more efficient with JP-4, 21.3% more efficient with JP-5, and 20.8% more efficient with JP-10(L). The sensitivity of the model is investigated using various fuel utilizations. When CH4 fuel is used, the integrated system is predicted to be 22.7% more efficient with a fuel utilization efficiency of 90% compared to that of 30%.
This paper will cover a variety of stable isotope systems, both light and heavy, that are used to interpret isotopic analysis in two different disciplines: bioarchaeology and forensic anthropology. To begin, I will give short histories of both bioarchaeology and forensic anthropology, including what is considered to be the beginning of the disciplines as well as the founders of said disciplines. Following the histories of the disciplines, there will be a short background in isotopes and isotopic analysis, including an introduction to isoscapes and how isotopic data can be collected for further interpretation. There will then be an introduction to light isotopes, focusing on the ones used for this thesis, which will lead into the background of each light isotope. Following the light isotopes is an introduction to the heavy isotopes and the backgrounds of each of the heavy isotopes. Finally, this thesis will end in the conclusions section.