Matching Items (826)
Filtering by
- Creators: Department of Supply Chain Management
- Creators: School of Sustainability
- Member of: Barrett, The Honors College Thesis/Creative Project Collection
- Member of: Theses and Dissertations
Description
The purpose of this honors project is to analyze the difference between different powder separation techniques, and their suitability for my capstone project – ‘Effect of Powder Reuse on DMLS (Direct Metal Laser Sintering) Product Integrity’. Due to the nature of my capstone project, my group needs to characterize foreign contaminants in IN 718 (Ni-based superalloy) powder with a mean diameter around 40um. In order to clearly analyze the contaminants and recycle useful IN 718 powders, powder separation is favorable since the filtered samples will be much easier to characterize rather than inspect all the powders at once under microscope. By conducting literature review, I found that powder separation is commonly used in Geology, and Chemistry department. To screen which combination of techniques could be the best for my project, I have consulted several research specialists, obtained adequate knowledge about powder separation. Accordingly, I will summarize the pros and cons of each method with regard the specific project that I am working on, and further explore the impacts of each method under economical, societal, and environmental considerations. Several powder separation techniques will be discussed in details in the following sections, including water elutriation, settling column, magnetic separation and centrifugation. In addition to these methods, sieving, water tabling and panning will be briefly introduced. After detailed comparison, I found that water elutriation is the most efficient way to purity IN718 powder for reuse purpose, and recovery rate is as high as 70%, which could result in a significant reduction in the manufacturing cost for Honeywell since currently Honeywell only use virgin powders to build parts, and 90% of the leftover powders are discarded.
ContributorsLuo, Zheyu (Author) / Adams, James (Thesis director) / Tasooji, Amaneh (Committee member) / Materials Science and Engineering Program (Contributor) / School of Sustainability (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
In Arizona's early history, Females garnered more independence than most other women in the United States because they were forced to build a completely new life in settlements with little to no infrastructure. Now, Arizona has achieved a level of equality that no other state has yet to achieve in regard to gender representation. Yet, we have yet to achieve total equity. This paper looks to analyze responses that female senators from the Arizona State Legislature gave while being interviewed by the author. With questions derived from previous research conducted on women in politics at the state and federal level, this paper will delve into the personal experiences of six female senators. Although their personal narratives differ, their stories seem to reflect a collective tie that unites the female members together, beyond party allegiance. Each of the responses given by the senators had some aspects that showed trends supporting the majority of the hypotheses. Moving forward, in order to achieve 50% equality, two more senators would need to be elected and replace male senators.
ContributorsMacdonald, James Nicholson (Author) / Woodall, Gina (Thesis director) / Lyon, Jenna (Committee member) / School of Politics and Global Studies (Contributor) / School of Sustainability (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
The free-base tetra-tolyl-porphyrin and the corresponding cobalt and iron porphyrin complexes were synthesized and characterized to show that this class of compound can be promising, tunable catalysts for carbon dioxide reduction. During cyclic voltammetry experiments, the iron porphyrin showed an on-set of ‘catalytic current’ at an earlier potential than the cobalt porphyrin’s in organic solutions gassed with carbon dioxide. The cobalt porphyrin yielded larger catalytic currents, but at the same potential as the electrode. This difference, along with the significant changes in the porphyrin’s electronic, optical and redox properties, showed that its capabilities for carbon dioxide reduction can be controlled by metal ions, allotting it unique opportunities for applications in solar fuels catalysis and photochemical reactions.
ContributorsSkibo, Edward Kim (Author) / Moore, Gary (Thesis director) / Woodbury, Neal (Committee member) / School of Molecular Sciences (Contributor) / School of Sustainability (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
For our collaborative thesis we explored the US electric utility market and how the Internet of Things technology movement could capture a possible advancement of the current existing grid. Our objective of this project was to successfully understand the market trends in the utility space and identify where a semiconductor manufacturing company, with a focus on IoT technology, could penetrate the market using their products. The methodology used for our research was to conduct industry interviews to formulate common trends in the utility and industrial hardware manufacturer industries. From there, we composed various strategies that The Company should explore. These strategies were backed up using qualitative reasoning and forecasted discounted cash flow and net present value analysis. We confirmed that The Company should use specific silicon microprocessors and microcontrollers that pertained to each of the four devices analytics demand. Along with a silicon strategy, our group believes that there is a strong argument for a data analytics software package by forming strategic partnerships in this space.
ContributorsLlazani, Loris (Co-author) / Ruland, Matthew (Co-author) / Medl, Jordan (Co-author) / Crowe, David (Co-author) / Simonson, Mark (Thesis director) / Hertzel, Mike (Committee member) / Department of Economics (Contributor) / Department of Finance (Contributor) / Department of Supply Chain Management (Contributor) / Department of Information Systems (Contributor) / Hugh Downs School of Human Communication (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Conflict minerals are those that are taken from violent, militia controlled mines in areas like the Democratic Republic of the Congo and used in technology such as laptops, cellphones, and computers. They are then sold to fund bloody wars that have been raging for years. The issue of conflict minerals continue to rise as technology advances. To combat the issue, the Dodd-Frank Act was implemented in the U.S. in 2010. The act requires companies listed on the stock exchange to report information on possible conflict mineral usage. However, there is a large discrepancy in the compliance levels between many similar technology companies subject to the Dodd-Frank Act. This paper addresses the factors driving compliance through the use of a theory testing method known as pattern matching, and attempts to answer why such similar companies have such different compliance levels. The pattern matching technique looks to test the applicability of theories based on what they theorize will happen and what actually happens in a given scenario. In this instance, the theories know as general deterrence, institutional, and stakeholder theory were put to the test in order to identify the factors driving compliance levels with conflict mineral policies. Both general deterrence and stakeholder theory were able to adequately match their theorized outcomes of conflict mineral compliance with actual observed outcomes. However, general deterrence theory more adequately explained the differences in compliance levels between similar companies. This information has implications on the policy side of the issue, as it reveals a way to more effectively drive up compliance levels by increasing disincentives and penalties in accordance with general deterrence theory.
ContributorsMeyer, Matthew Jacob (Author) / Kull, Thomas (Thesis director) / Wood, Reed (Committee member) / Department of Supply Chain Management (Contributor) / W. P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
As the IoT (Internet of Things) market continues to grow, Company X needs to find a way to penetrate the market and establish larger market share. The problem with Company X's current strategy and cost structure lies in the fact that the fastest growing portion of the IoT market is microcontrollers (MCUs). As Company X currently holds its focus in manufacturing microprocessors (MPUs), the current manufacturing strategy is not optimal for entering competitively into the MCU space. Within the MCU space, the companies that are competing the best do not utilize such high level manufacturing processes because these low cost products do not demand them. Given that the MCU market is largely untested by Company X and its products would need to be manufactured at increasingly lower costs, it runs the risk of over producing and holding obsolete inventory that is either scrapped or sold at or below cost. In order to eliminate that risk, we will explore alternative manufacturing strategies for Company X's MCU products specifically, which will allow for a more optimal cost structure and ultimately a more profitable Internet of Things Group (IoTG). The IoT MCU ecosystem does not require the high powered technology Company X is currently manufacturing and therefore, Company X loses large margins due to its unnecessary leading technology. Since cash is king, pursuing a fully external model for MCU design and manufacturing processes will generate the highest NPV for Company X. It also will increase Company X's market share, which is extremely important given that every tech company in the world is trying to get its hands into the IoT market. It is possible that in ten to thirty years down the road, Company X can manufacture enough units to keep its products in-house, but this is not feasible in the foreseeable future. For now, Company X should focus on the cost market of MCUs by driving its prices down while maintaining low costs due to the variables of COGS and R&D given in our fully external strategy.
ContributorsKadi, Bengimen (Co-author) / Peterson, Tyler (Co-author) / Langmack, Haley (Co-author) / Quintana, Vince (Co-author) / Simonson, Mark (Thesis director) / Hertzel, Michael (Committee member) / Department of Supply Chain Management (Contributor) / Department of Finance (Contributor) / Department of Information Systems (Contributor) / Department of Marketing (Contributor) / School of Accountancy (Contributor) / W. P. Carey School of Business (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
This is a creative thesis project on the topic of the third party logistics industry, and the improvements that are possible through the implementation of goods to person technologies. The scope of the project entails the relationship between Company X, which is a third party logistics provider, and Company Y, a major toy retailer. This thesis identifies current trends for the third party logistics industry such as rising operating costs and average savings achieved through these business relationships. After identifying the negative trends that Company X is vulnerable to such as high human resources costs, and cost of quality issues. Given the findings derived from industry data, a final recommendation was settled on to improve productivity and ultimately reduce the use of temporary labor for Company X. The implementation of a goods to person technology solution provides the opportunity to reduce hours of operation, man hours, as well as direct and indirect costs such as labor. Research has proven that firms operating in the retail industry rely heavily on temporary labor to handle the seasonal demand brought by the holidays, thus this recommendation could be applied to a variety of operations. The data compiled throughout this thesis have major implications for the third party logistics industry and achieving long term profitability in operations management.
ContributorsFonseca, Tanner (Author) / Printezis, Antonios (Thesis director) / Kellso, James (Committee member) / Department of Supply Chain Management (Contributor) / School of Sustainability (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
This work challenges the conventional perceptions surrounding the utility and use of the CMS Open Payments data. I suggest unconsidered methodologies for extracting meaningful information from these data following an exploratory analysis of the 2014 research dataset that, in turn, enhance its value as a public good. This dataset is favored for analysis over the general payments dataset as it is believed that generating transparency in the pharmaceutical and medical device R&D process would be of the greatest benefit to public health. The research dataset has been largely ignored by analysts and this may be one of the few works that have accomplished a comprehensive exploratory analysis of these data. If we are to extract valuable information from this dataset, we must alter both our approach as well as focus our attention towards re-conceptualizing the questions that we ask. Adopting the theoretical framework of complex systems serves as the foundation for our interpretation of the research dataset. This framework, in conjunction with a methodological toolkit for network analysis, may set a precedent for the development of alternative perspectives that allow for novel interpretations of the information that big data attempts to convey. By thus proposing a novel perspective in interpreting the information that this dataset contains, it is possible to gain insight into the emergent dynamics of the collaborative relationships that are established during the pharmaceutical and medical device R&D process.
ContributorsVelez-Cruz, Nayely Luz (Author) / Laubichler, Manfred (Thesis director) / Van Der Leeuw, Sander (Committee member) / School of Sustainability (Contributor) / Sanford School of Social and Family Dynamics (Contributor) / School of Human Evolution and Social Change (Contributor) / School of Historical, Philosophical and Religious Studies (Contributor) / School of Life Sciences (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Business students are trained to be professional problem solver. In order to improve students' ability to solve real-life problem, more and more business schools are encouraging students to attend case competitions and do internships before graduation. In curriculum, students are required to work on business cases and projects in team. However, due to the limited exposure to real-life business scenarios, most undergraduate students feel unprepared when faced with business problems in course projects, case competitions, and internships. Therefore, the goal of this Honors Creative Project is to provide students with an interactive resource to succeed in course projects, case competitions, and even internship projects. By introducing resources that focused on analysis approach and project management, students can learn from some successful experience and become more competitive in job market. After competing at four case competitions with talents all over the nation, we accumulated precious experience in case analysis and teamwork development within a high-pressure environment. In addition, the experiences with internships, consulting and course projects have also aided the participants' development in professionalism and quantitative analytics. Reflecting on what we have learned from our experiences, we strongly believe that the insights gained from the past are not only a treasure for us individually, but also a great resource for our colleagues. We hope to transfer our knowledge to others for their own success where "best practices" can be learned.
ContributorsXiahou, Xiaonan (Co-author) / Thoi, Kenson (Co-author) / Printezis, Antonios (Thesis director) / Arrfelt, Mathias (Committee member) / Department of Supply Chain Management (Contributor) / Department of Economics (Contributor) / Department of Finance (Contributor) / Department of Information Systems (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
This paper explores the relationship between wildfire management and the consideration of ecological and environmental concerns in Arizona. To get a proper perspective on the current state of wildfire management in Arizona, information on two wildfire management programs, the Four Forests Restoration Initiative and FireScape, was researched and analyzed, as well as contemporary fire policy, a history of wildfire in Arizona, and two recent fires in Sedona, AZ. The two fires in Sedona, the Brins Fire of 2006 and the Slide Fire of 2014, act as a focal point for this ecological management transition, as even within an 8-year period, we can see the different ways the two fires were managed and the transition to a greater ecological importance in management strategies. These all came together to give a full spectrum for the factors that have led to more ecologically-prominent wildfire management strategies in Arizona.
ContributorsGeorge-Sills, Dylan (Author) / Pyne, Stephen (Thesis director) / Hirt, Paul (Committee member) / Barrett, The Honors College (Contributor) / School of Life Sciences (Contributor) / School of Sustainability (Contributor)
Created2015-05