Matching Items (163)
Filtering by
- Resource Type: Text
Description
Widespread use of halogenated organic compounds for commercial and industrial purposes makes halogenated organic pollutants (HOPs) a global challenge for environmental quality. Current wastewater treatment plants (WWTPs) are successful at reducing chemical oxygen demand (COD), but the removal of HOPs often is poor. Since HOPs are xenobiotics, the biodegradation of HOPs is usually limited in the WWTPs. The current methods for HOPs treatments (e.g., chemical, photochemical, electrochemical, and biological methods) do have their limitations for practical applications. Therefore, a combination of catalytic and biological treatment methods may overcome the challenges of HOPs removal.This dissertation investigated a novel catalytic and biological synergistic platform to treat HOPs. 4-chlorophenol (4-CP) and halogenated herbicides were used as model pollutants for the HOPs removal tests. The biological part of experiments documented successful co-oxidation of HOPs and analog non-halogenated organic pollutants (OPs) (as the primary substrates) in the continuous operation of O2-based membrane biofilm reactor (O2-MBfR). In the first stage of the synergistic platform, HOPs were reductively dehalogenated to less toxic and more biodegradable OPs during continuous operation of a H2-based membrane catalytic-film reactor (H2-MCfR). The synergistic platform experiments demonstrated that OPs generated in the H2-MCfR were used as the primary substrates to support the co-oxidation of HOPs in the subsequent O2-MBfR. Once at least 90% conversation of HOPs to OPs was achieved in the H2-MCfR, the products (OPs to HOPs mole ratio >9) in the effluent could be completely mineralized through co-oxidation in O2-MBfR. By using H2 gas as the primary substrate, instead adding the analog OP, the synergistic platform greatly reduced chemical costs and carbon-dioxide emissions during HOPs co-oxidation.
ContributorsLuo, Yihao (Author) / Rittmann, Bruce (Thesis advisor) / Krajmalnik-Brown, Rosa (Committee member) / Torres, Cesar (Committee member) / Arizona State University (Publisher)
Created2022
Description
Electroactive bacteria connect biology to electricity, acting as livingelectrochemical catalysts. In nature, these bacteria can respire insoluble compounds like
iron oxides, and in the laboratory, they are able to respire an electrode and produce an
electrical current. This document investigates two of these electroactive bacteria:
Geobacter sulfurreducens and Thermincola ferriacetica. G. sulfurreducens is a Gramnegative iron-reducing soil bacterium, and T. ferriacetica is a thermophilic, Grampositive bacterium that can reduce iron minerals and several other electron acceptors.
Respiring insoluble electron acceptors like metal oxides presents challenges to a
bacterium. The organism must extend its electron transport chain from the inner
membrane outside the cell and across a significant distance to the surface of the electron
acceptor. G. sulfurreducens is one of the most-studied electroactive bacteria, and despite
this there are many gaps in knowledge about its mechanisms for transporting electrons
extracellularly. Research in this area is complicated by the presence of multiple pathways
that may be concurrently expressed. I used cyclic voltammetry to determine which
pathways are present in electroactive biofilms of G. sulfurreducens grown under different
conditions and correlated this information with gene expression data from the same
conditions. This correlation presented several genes that may be components of specific
pathways not just at the inner membrane but along the entire respiratory pathway, and I
propose an updated model of the pathways in this organism. I also characterized the
composition of G. sulfurreducens and found that it has high iron and lipid content
independent of growth condition, and the high iron content is explained by the large
abundance of multiheme cytochrome expression that I observed. I used multiple
microscopy techniques to examine extracellular respiration in G. sulfurreducens, and in
the process discovered a novel organelle: the intracytoplasmic membrane. I show 3D
reconstructions of the organelle in G. sulfurreducens and discuss its implications for the
cell’s metabolism. Finally, I discuss gene expression in T. ferriacetica in RNA samples
collected from an anode-respiring culture and highlight the most abundantly expressed
genes related to anode-respiring metabolism.
ContributorsHowley, Ethan Thomas (Author) / Torres, César I (Thesis advisor) / Krajmalnik-Brown, Rosa (Thesis advisor) / Nannenga, Brent (Committee member) / Arizona State University (Publisher)
Created2022
Description
The microorganisms that colonize the gastrointestinal tract have been recognized over the last several decades to have a significant bearing on the health trajectories of the hosts that harbor them. The collection of these gut microbes display links with acute and chronic disease, garnering substantial interest in leveraging the microbiome for improved health states. How these microbes assemble as a complex community and interact with each other, and the host depends on a multitude of factors. In adulthood, diet is one of the main moderators, having a significant influence on community composition and the functional output captured in the metabolites produced and/or modified by the gut microbiome. Thus, the assembly of microbes in the gut are tightly intertwined with health. In this dissertation, I examine the impact of diet and feeding behaviors on the gut microbiome and what features may be grounding or responsive under such pressures. Specifically, I first explore the avian gut microbiome as a barometer of nutritional and environmental influence on host health. Birds have continually displayed robust physiology under dietary pressures, placing them in an important, though underutilized, position within the translational science framework. Second, I describe the association of food insecurity on gut microbiome and metabolome profiles in a diverse college-based sample. Food insecurity provides its own set of unique pressures, such as unintentional calorie restriction, and inconsistent dietary intake and access to healthy food options. Third, I examine the effect of a one vs. two-consecutive days of intermittent fasting on the gut microbiome, the plasma metabolome, and associated clinical outcomes in overweight and obese adults. Growing in scientific and lay popularity, dietary fasting has been noted to induce changes in the diversity of gut microflora and gut motility, though different fasting lengths have not been assessed in the context of the human microbiome. Overall, this collection of work underscores that the community of microbes in the gut are individualized, resilient, and baseline composition and functioning are germane to how an individual may react to a particular dietary intervention.
ContributorsMohr, Alex (Author) / Sweazea, Karen L. (Thesis advisor) / Johnston, Carol S. (Committee member) / Sears, Dorothy D. (Committee member) / Whisner, Corrie M. (Committee member) / Krajmalnik-Brown, Rosa (Committee member) / Arizona State University (Publisher)
Created2022
Description
Trichloroethene (TCE) and hexavalent chromium (Cr (VI)) are ubiquitous subsurface contaminants affecting the water quality and threatening human health. Microorganisms capable of TCE and Cr (VI) reductions can be explored for bioremediation at contaminated sites. The goal of my dissertation research was to address challenges that decrease the efficiency of bioremediation in the subsurface. Specifically, I investigated strategies to (i) promote improve microbial reductive dechlorination extent through the addition of Fe0 and (ii) Cr (VI) bio-reduction through enrichment of specialized microbial consortia. Fe0 can enhance microbial TCE reduction by inducing anoxic conditions and generating H2 (electron donor). I first evaluated the effect of Fe0 on microbial reduction of TCE (with ClO4– as co-contaminant) using semi-batch soil microcosms. Results showed that high concentration of Fe0 expected during in situ remediation inhibited microbial TCE and ClO4– reduction when added together with Dehalococcoides mccartyi-containing cultures. A low concentration of aged Fe0 enhanced microbial TCE dechlorination to ethene and supported complete microbial ClO4– reduction. I then evaluated a decoupled Fe0 and biostimulation/bioaugmentation treatment approach using soil packed columns with continuous flow of groundwater. I demonstrated that microbial TCE reductive dechlorination to ethene can be benefitted by Fe0 abiotic reactions, when biostimulation and bioaugmentation are performed downstream of Fe0 addition. Furthermore, I showed that ethene production can be sustained in the presence of aerobic groundwater (after Fe0 exhaustion) by the addition of organic substrates. I hypothesized that some lessons learned from TCE Bioremediation can be applied also for other pollutants that can benefit from anaerobic reductions, like Cr (VI). Bioremediation of Cr (VI) has historically relied on biostimulation of native microbial communities, partially due to the lack of knowledge of the benefits of adding enriched consortia of specialized microorganisms (bioaugmentation). To determine the merits of a specialized consortium on bio-reduction of Cr (VI), I first enriched a culture on lactate and Cr (VI). The culture had high abundance of putative Morganella species and showed rapid and sustained Cr (VI) bio-reduction compared to a subculture grown with lactate only (without Morganella). Overall, this dissertation work documents possible strategies for synergistic abiotic and biotic chlorinated ethenes reduction, and highlights that specialized consortia may benefit Cr (VI) bio-reduction.
ContributorsMohana Rangan, Srivatsan (Author) / Krajmalnik-Brown, Rosa (Thesis advisor) / Delgado, Anca G (Thesis advisor) / Torres, César I (Committee member) / van Paassen, Leon (Committee member) / Arizona State University (Publisher)
Created2022
Description
This dissertation encompasses the interaction of antimicrobial chemicals and emerging contaminants with multi-drug resistant (MDR) bacteria and their implications in engineered systems. The aim is to investigate the effect of combination antimicrobials on MDR bacteria E. coli, evaluate the extent of synergism and antagonism of utilizing two distinct biocidal chemicals, and evaluate the influence of endocrine-disrupting chemicals (EDCs) on protein production in response to stressors. Resistance mechanisms of bacteria such as E. coli include the use of protein systems that efflux excess nutrients or toxic compounds. These efflux proteins activate in response to environmental stressors such as contaminants and antimicrobials to varying degrees and are major contributors to antibiotic resistance in pathogenic bacteria. As is the case with engineered microbial environments, large quantities of emerging contaminants interact with bacteria, influencing antibiotic resistance and attenuation of these chemicals to an unknown degree. Interactions of antimicrobials on MDR bacteria such as E. coli have been extensively studied for pathogens, including synergistic combinations. Despite these studies in this field, a fundamental understanding of how chemicals influence antibiotic resistance in biological processes typical of engineered microbial environments is still ongoing. The impacts of EDCs on antibiotic resistance in E. coli were investigated by the characterization of synergism for antimicrobial therapies and the extrapolation of these metrics to the cycling of EDCs in engineered systems to observe the extent of antibiotic resistance proteins to the EDCs. The impact of this work provides insight into the delicate biochemistry and ongoing resistance phenomena regarding engineered systems.
ContributorsNovoa, Diego Erick (Author) / Conroy-Ben, Otakuye (Thesis advisor) / Abbazadegan, Morteza (Committee member) / Krajmalnik-Brown, Rosa (Committee member) / Arizona State University (Publisher)
Created2022
Description
In the last few decades, extensive research efforts have been focused on scaling down silicon-based complementary metal-oxide semiconductor (CMOS) technology to enable the continuation of Moore’s law. State-of-art CMOS includes fully depleted silicon-on-insulator (FDSOI) field-effect-transistors (FETs) with ultra-thin silicon channels (6 nm), as well as other three-dimensional (3D) device architectures like Fin-FETs, nanosheet FETs, etc. Significant research efforts have characterized these technologies towards various applications, and at different conditions including a wide range of temperatures from room temperature (300 K) down to cryogenic temperatures. Theoretical efforts have studied ultrascaled devices using Landauer theory to further understand their transport properties and predict their performance in the quasi-ballistic regime.Further scaling of CMOS devices requires the introduction of new semiconducting channel materials, as now established by the research community. Here, two-dimensional (2D) semiconductors have emerged as a promising candidate to replace silicon for next-generation ultrascaled CMOS devices. These emerging 2D semiconductors also have applications beyond CMOS, for example in novel memory, neuromorphic, and spintronic devices. Graphene is a promising candidate for spintronic devices due to its outstanding spin transport properties as evidenced by numerous studies in non-local lateral spin valve (LSV) geometries. The essential components of graphene-based LSV, such as graphene FETs, metal-graphene contacts, and tunneling barriers, were individually investigated as part of this doctoral dissertation.
In this work, several contributions were made to these CMOS and beyond CMOS technologies. This includes comprehensive characterization and modeling of FDSOI nanoscale FETs from room temperature down to cryogenic temperatures. Using Landauer theory for nanoscale transistors, FDSOI devices were analyzed and modeled under quasi-ballistic operation. This was extended towards a virtual-source modeling approach that accounts for temperature-dependent quasi-ballistic transport and back-gate biasing effects. Additionally, graphene devices with ultrathin high-k gate dielectrics were investigated towards FETs, non-volatile memory, and spintronic devices. New contributions were made relating to charge trapping effects and their impact on graphene device electrostatics (Dirac voltage shifts) and transport properties (impact on mobility and conductivity). This work also studied contact resistance and tunneling effects using transfer length method (TLM) graphene FET structures and magnetic tunneling junction (MTJ) towards graphene-based LSV.
ContributorsZhou, Guantong (Author) / Sanchez Esqueda, Ivan (Thesis advisor) / Vasileska, Dragica (Committee member) / Tongay, Sefaattin (Committee member) / Thornton, Trevor (Committee member) / Arizona State University (Publisher)
Created2023
Description
The research of alternative materials and new device architectures to exceed the limits of conventional silicon-based devices has been sparked by the persistent pursuit of semiconductor technology scaling. The development of tungsten diselenide (WSe2) and molybdenum disulfide (MoS2), well-known member of the transition metal dichalcogenide (TMD) family, has made great strides towards ultrascaled two-dimensional (2D) field-effect-transistors (FETs). The scaling issues facing silicon-based complementary metal-oxide-semiconductor (CMOS) technologies can be solved by 2D FETs, which show extraordinary potential.This dissertation provides a comprehensive experimental analysis relating to improvements in p-type metal-oxide-semiconductor (PMOS) FETs with few-layer WSe2 and high-κ metal gate (HKMG) stacks. Compared to this works improved methods, standard metallization (more damaging to underlying channel) results in significant Fermi-level pinning, although Schottky barrier heights remain small (< 100 meV) when using high work function metals. Temperature-dependent analysis reveals a dominant contribution to contact resistance from the damaged channel access region. Thus, through less damaging metallization methods combined with strongly scaled HKMG stacks significant improvements were achieved in contact resistance and PMOS FET overall performance. A clean contact/channel interface was achieved through high-vacuum evaporation and temperature-controlled stepped deposition. Theoretical analysis using a Landauer transport adapted to WSe2 Schottky barrier FETs (SB-FETs) elucidates the prospects of nanoscale 2D PMOS FETs indicating high-performance towards the ultimate CMOS scaling limit.
Next, this dissertation discusses how device electrical characteristics are affected by scaling of equivalent oxide thickness (EOT) and by adopting double-gate FET architectures, as well as how this might support CMOS scaling. An improved gate control over the channel is made possible by scaling EOT, improving on-off current ratios, carrier mobility, and subthreshold swing. This study also elucidates the impact of EOT scaling on FET gate hysteresis attributed to charge-trapping effects in high-κ-dielectrics prepared by atomic layer deposition (ALD). These developments in 2D FETs offer a compelling alternative to conventional silicon-based devices and a path for continued transistor scaling. This research contributes to ongoing efforts in 2D materials for future semiconductor technologies. Finally, this work introduces devices based on emerging Janus TMDs and bismuth oxyselenide (Bi2O2Se) layered semiconductors.
ContributorsPatoary, Md Naim Hossain (Author) / Sanchez Esqueda, Ivan (Thesis advisor) / Tongay, Sefaattin (Committee member) / Vasileska, Dragica (Committee member) / Goodnick, Stephen (Committee member) / Arizona State University (Publisher)
Created2023
Description
In the realm of environmental engineering, the compound N-(1,3-dimethylbutyl)-N′-phenyl-p-phenylenediamine (6PPD), has recently emerged as an environmental concern. 6PPD serves as a tire additive to prolong the lifespan of rubber but can transform into a more toxic derivative, N-(1,3-dimethylbutyl)-N′-phenyl-p-phenylenediamine-quinone (6PPD-quinone), when exposed to ground-level ozone. Initially, my research sought to investigate the biodegradation of 6PPD and 6PPD-quinone using microbial cultures. However, unexpected challenges arising from limited solubility and potential toxicity to microorganisms led to a shift in research objectives. The study then refocused on developing methods for detecting and quantifying 6PPD and 6PPD-quinone. The scarcity of literature available on the environmental fate and transport of these compounds underscores the pressing need for further research to gain a comprehensive understanding of the behavior of these chemicals. Consequently, the development of effective detection strategies will enable the development of effective remediation strategies to safeguard aquatic ecosystems.
ContributorsKoenig-Vinicombe, Ryan (Author) / Delgado, Anca (Thesis director) / Skinner, Justin (Committee member) / Barrett, The Honors College (Contributor) / College of Integrative Sciences and Arts (Contributor) / School of Sustainability (Contributor) / School of Sustainable Engineering & Built Envirnmt (Contributor)
Created2023-12
Description
This work presents a thorough analysis of reconstruction of global wave fields (governed by the inhomogeneous wave equation and the Maxwell vector wave equation) from sensor time series data of the wave field. Three major problems are considered. First, an analysis of circumstances under which wave fields can be fully reconstructed from a network of fixed-location sensors is presented. It is proven that, in many cases, wave fields can be fully reconstructed from a single sensor, but that such reconstructions can be sensitive to small perturbations in sensor placement. Generally, multiple sensors are necessary. The next problem considered is how to obtain a global approximation of an electromagnetic wave field in the presence of an amplifying noisy current density from sensor time series data. This type of noise, described in terms of a cylindrical Wiener process, creates a nonequilibrium system, derived from Maxwell’s equations, where variance increases with time. In this noisy system, longer observation times do not generally provide more accurate estimates of the field coefficients. The mean squared error of the estimates can be decomposed into a sum of the squared bias and the variance. As the observation time $\tau$ increases, the bias decreases as $\mathcal{O}(1/\tau)$ but the variance increases as $\mathcal{O}(\tau)$. The contrasting time scales imply the existence of an ``optimal'' observing time (the bias-variance tradeoff). An iterative algorithm is developed to construct global approximations of the electric field using the optimal observing times. Lastly, the effect of sensor acceleration is considered. When the sensor location is fixed, measurements of wave fields composed of plane waves are almost periodic and so can be written in terms of a standard Fourier basis. When the sensor is accelerating, the resulting time series is no longer almost periodic. This phenomenon is related to the Doppler effect, where a time transformation must be performed to obtain the frequency and amplitude information from the time series data. To obtain frequency and amplitude information from accelerating sensor time series data in a general inhomogeneous medium, a randomized algorithm is presented. The algorithm is analyzed and example wave fields are reconstructed.
ContributorsBarclay, Bryce Matthew (Author) / Mahalov, Alex (Thesis advisor) / Kostelich, Eric J (Thesis advisor) / Moustaoui, Mohamed (Committee member) / Motsch, Sebastien (Committee member) / Platte, Rodrigo (Committee member) / Arizona State University (Publisher)
Created2023
Description
Doping is the cornerstone of Semiconductor technology, enabling the functionalities of modern digital electronics. Two-dimensional (2D) transition metal dichalcogenides (TMDCs) have tunable direct bandgaps, strong many-body interactions, and promising applications in future quantum information sciences, optoelectronic, spintronic, and valleytronic devices. However, their wafer-scale synthesis and precisely controllable doping are challenging. Moreover, there is no fixed framework to identify the doping concentration, which impedes their process integration for future commercialization. This work utilizes the Neutron Transmutation Doping technique to control the doping uniformly and precisely in TMDCs. Rhenium and Tin dopants are introduced in Tungsten- and Indium-based Chalcogenides, respectively. Fine-tuning over 0.001% doping level is achieved. Precise analytical techniques such as Gamma spectroscopy and Secondary Ion Mass Spectrometry are used to quantify ultra-low doping levels ranging from 0.005-0.01% with minimal error. Dopants in 2D TMDCs often exhibit a broad stokes-shifted emission, with high linewidths, due to extrinsic effects such as substrate disorder and surface adsorbates. A well-defined bound exciton emission induced by Rhenium dopants in monolayer WSe2 and WS2 at liquid nitrogen temperatures is reported along with specific annealing regimes to minimize the defects induced in the Neutron Transmutation process. This work demonstrates a framework for Neutron Doping in 2D materials, which can be a scalable process for controlling doping and doping-induced effects in 2D materials.
ContributorsLakhavade, Sushant Sambhaji (Author) / Tongay, Sefaattin (Thesis advisor) / Alford, Terry (Committee member) / Yang, Sui (Committee member) / Arizona State University (Publisher)
Created2023