Matching Items (180)
Filtering by
- Resource Type: Text
Description
Most daily living tasks consist of pairing a series of sequential movements, e.g., reaching to a cup, grabbing the cup, lifting and returning the cup to your mouth. The process by which we control and mediate the smooth progression of these tasks is not well understood. One method which we can use to further evaluate these motions is known as Startle Evoked Movements (SEM). SEM is an established technique to probe the motor learning and planning processes by detecting muscle activation of the sternocleidomastoid muscles of the neck prior to 120ms after a startling stimulus is presented. If activation of these muscles was detected following a stimulus in the 120ms window, the movement is classified as Startle+ whereas if no sternocleidomastoid activation is detected after a stimulus in the allotted time the movement is considered Startle-. For a movement to be considered SEM, the activation of movements for Startle+ trials must be faster than the activation of Startle- trials. The objective of this study was to evaluate the effect that expertise has on sequential movements as well as determining if startle can distinguish when the consolidation of actions, known as chunking, has occurred. We hypothesized that SEM could distinguish words that were solidified or chunked. Specifically, SEM would be present when expert typists were asked to type a common word but not during uncommon letter combinations. The results from this study indicated that the only word that was susceptible to SEM, where Startle+ trials were initiated faster than Startle-, was an uncommon task "HET" while the common words "AND" and "THE" were not. Additionally, the evaluation of the differences between each keystroke for common and uncommon words showed that Startle was unable to distinguish differences in motor chunking between Startle+ and Startle- trials. Explanations into why these results were observed could be related to hand dominance in expert typists. No proper research has been conducted to evaluate the susceptibility of the non-dominant hand's fingers to SEM, and the results of future studies into this as well as the results from this study can impact our understanding of sequential movements.
ContributorsMieth, Justin Richard (Author) / Honeycutt, Claire (Thesis director) / Santello, Marco (Committee member) / Harrington Bioengineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
Description
Graphene is a very strong two-dimensional material with a lot of potential applications in microelectromechanical systems (MEMS). In this research, graphene is being optimized for use in a 5 m x 5 m graphene resonator. To work properly, this graphene resonator must have a uniform strain across all manufactured devices. To reduce strain induced in graphene sheets grown for use in these resonators, evaporated platinum has been used in this investigation due to its relatively lower surface roughness compared to copper films. The final goal is to have the layer of ultrathin platinum (<=200 nm) deposited on the MEMS graphene resonator and used to grow graphene directly onto the devices to remove the manual transfer step due to its inscalability. After growth, graphene is coated with polymer and the platinum is then etched. This investigation concentrated on the transfer process of graphene onto Si/SiO2 substrate from the platinum films. It was determined that the ideal platinum etchant was aqua regia at a volumetric ratio of 6:3:1 (H2O:HCl:HNO3). This concentration was dilute enough to preserve the polymer and graphene layer, but strong enough to etch within a day. Type and thickness of polymer support layers were also investigated. PMMA at a thickness of 200 nm was ideal because it was easy to remove with acetone and strong enough to support the graphene during the etch process. A reference growth recipe was used in this investigation, but now that the transfer has been demonstrated, growth can be optimized for even thinner films.
ContributorsCayll, David Richard (Author) / Tongay, Sefaattin (Thesis director) / Lee, Hyunglae (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
Startle-evoked-movement (SEM), the involuntary release of a planned movement via a startling stimulus, has gained significant attention recently for its ability to probe motor planning as well as enhance movement of the upper extremity following stroke. We recently showed that hand movements are susceptible to SEM. Interestingly, only coordinated movements of the hand (grasp) but not individuated movements of the finger (finger abduction) were susceptible. It was suggested that this resulted from different neural mechanisms involved in each task; however it is possible this was the result of task familiarity. The objective of this study was to evaluate a more familiar individuated finger movement, typing, to determine if this task was susceptible to SEM. We hypothesized that typing movements will be susceptible to SEM in all fingers. These results indicate that individuated movements of the fingers are susceptible to SEM when the task involves a more familiar task, since the electromyogram (EMG) latency is faster in SCM+ trials compared to SCM- trials. However, the middle finger does not show a difference in terms of the keystroke voltage signal, suggesting the middle finger is less susceptible to SEM. Given that SEM is thought to be mediated by the brainstem, specifically the reticulospinal tract, this suggest that the brainstem may play a role in movements of the distal limb when those movements are very familiar, and the independence of each finger might also have a significant on the effect of SEM. Further research includes understanding SEM in fingers in the stroke population. The implications of this research can impact the way upper extremity rehabilitation is delivered.
ContributorsQuezada Valladares, Maria Jose (Author) / Honeycutt, Claire (Thesis director) / Santello, Marco (Committee member) / Harrington Bioengineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2016-12
Description
Solid-state lithium-ion batteries are a major area of research due to their increased safety characteristics over conventional liquid electrolyte batteries. Lithium lanthanum zirconate (LLZO) is a promising garnet-type ceramic for use as a solid-state electrolyte due to its high ionic conductivity. The material exists in two dierent phases, one that is cubic in structure and one that is tetragonal. One potential synthesis method that results in LLZO in the more useful, cubic phase, is electrospinning, where a mat of nanowires is spun and then calcined into LLZO. A phase containing lanthanum zirconate (LZO) and amorphous lithium occursas an intermediate during the calcination process. LZO has been shown to be a sintering aid for LLZO, allowing for lower sintering temperatures. Here it is shown the eects of internal LZO on the sintered pellets. This is done by varying the 700C calcination time to transform diering amounts of LZO and LLZO in electrospun nanowires, and then using the same sintering parameters for each sample. X-ray diraction was used to get structural and compositional analysis of both the calcined powders and sintered pellets. Pellets formed from wires calcined at 1 hour or longer contained only LLZO even if the calcined powder had only undergone the rst phase transformation. The relative density of the pellet with no initial LLZO of 61.0% was higher than that of the pellet with no LZO, which had a relative density of 57.7%. This allows for the same, or slightly higher, quality material to be synthesized with a shorter amount of processing time.
ContributorsLondon, Nathan Harry (Author) / Chan, Candace (Thesis director) / Tongay, Sefaattin (Committee member) / Department of Physics (Contributor) / Materials Science and Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2017-05
Description
Research on human grasp typically involves the grasp of objects designed for the study of fingertip forces. Instrumented objects for such studies have often been designed for the simulation of functional tasks, such as feeding oneself, or for rigidity such that the objects do not deform when grasped. The goal of this thesis was to design a collapsible, instrumented object to study grasp of breakable objects. Such an object would enable experiments on human grip responses to unexpected finger-object events as well as anticipatory mechanisms once object fragility has been observed. The collapsible object was designed to be modular to allow for properties such as friction and breaking force to be altered. The instrumented object could be used to study both human and artificial grasp.
ContributorsTorrez, Troy (Author) / Santos, Veronica (Thesis director) / Santello, Marco (Committee member) / Artemiadis, Panagiotis (Committee member) / Barrett, The Honors College (Contributor)
Created2012-05
Description
Telestroke networks reduce disparities in acute stroke care between metropolitan primary stroke centers and remote hospitals. Current technologies used to conduct remote patient assessments have very high start-up costs, yet they cannot consistently establish quality connection in a timely manner. Smartphgones can be used for high quality video teleconferencing (HQ-VTC). They are relatively inexpensive and widley used among healthcare providers. We aimed to study the reliability of HQ-VTC using smartphones for conducting the NIHSS. Two vascular neurologists (VNs) assessed 83 stroke patients with the NIHSS. The remote VN assessed patients using videoconferencing on a smartphone with the assistance of a bedside medical aide. The bedside VN rated patients ontemporaneously. Each VN was blinded to the other's NIHSS scores. We tested the inter-method agreement and physician satisfaction with the device. We demonstrated high total NIHSS score correlation between the methods (r=0.941, p<0.001). The mean total NIHSS scores for bedside and remote assessments were 7.3 plus or minus 7.9 and 6.7 plus or minus 7.6 with ranges of 0-30 and 0-37, respectively. Seven NIHSS categories had significantly high agreement beyond chance: LOC-questions, LOC-commands, visual fields, motor left arm, motor right arm, motor left leg, motor right leg; seven categories had moderate agreement: LOC-consciousness, best gaze, facial palsy, sensory, best language, dysarthria, extinction/inattention; one category had poor agreement: ataxia. There was high physician satisfaction with the device. The VNs rated 96% of the assessments as good or very good for "image quality," "sound quality," "ease of use," and "ability to assess subject using NIHSS," and 84% of the assesssments as good or very good for "reception in hospital." The smartphones with HQ-VTC is reliable, easy to use, and affordable for telestroke NIHSS administration. This device has high physician satisfaction. With the variety of smartphones and professional medical applications available today, the telestroke practitioner has all the tools necessary for fast clinical decision-makingby accessing electronic medial records, viewing images, and tracking patient vitals.
ContributorsVegunta, Sravanthi (Author) / Demaerschalk, Bart (Thesis director) / Santello, Marco (Committee member) / Hurlbut, Ben (Committee member) / Barrett, The Honors College (Contributor)
Created2012-05
Description
The purpose of this paper was to systematically review current literature regarding the effect of hand splints on aesthetic outcomes for individuals with acquired hand deformities. Hand splints vary in form and function, and are used to maintain or ameliorate hand function and aesthetics. A literature search was performed on peer-reviewed publications that used splinting as an intervention for conservative hand improvement. Evidence from ten randomized clinical trials (published from 2003 to 2015) was evaluated for aesthetic improvement among a total of 659 subjects. Cosmetic outcomes were analyzed by a change in angle measurements, such as extensor lag, ulnar deviation, and passive and active range of motion. Of these ten studies, five focused on hand deformities caused by neurological impairment, while the other five measured those with musculoskeletal complications. Only two of the ten studies concluded that splinting could aesthetically improve the hands, and only one of these reporting statistical significance in its data. The data was not only limited in quantity, but was presented in heterogeneous formats. There was an extensive variation in measured outcomes, intervention protocols, follow-up times, and many other aspects of the studies; this dissimilarity led to difficulty in performing a systematic assessment. The majority of evidence concludes that splinting does not improve the appearance of deformities, however none directly investigated this measure. Therefore, further RCTs that include measurements of cosmetic traits are necessary to better quantify the effect of splinting for management of hand deformities. This review was the first of its kind to evaluate the correction of hand deformities using splints as an intervention.
ContributorsVale, Nicholas Marshall (Author) / Santello, Marco (Thesis director) / Skiba, Jeffry (Committee member) / Harrington Bioengineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor, Contributor) / School of Biological and Health Systems Engineering (Contributor)
Created2017-05
Description
In the Rare-earth-Tri-telluride family, (RTe3s) [R=La, Ce, Nd, Sm, Gd, Tb, Dy, Er, Ho, Tm] the emergence of Charge Density Waves, (CDW) has been under investigation for a long time due to broadly tunable properties by either chemical substitution or pressure application. These quasi 2D Layered materials RTe3s undergo Fermi Surface Nesting leading to CDW instability. CDWs are electronic instabilities found in low-dimensional materials with highly anisotropic electronic structures. Since the CDW is predominantly driven by Fermi-surface (FS) nesting, it is especially sensitive to pressure-induced changes in the electronic structure. The FS of RTe3s is a function of p-orbitals of Tellurium atoms, which are arranged in two adjacent planes in the crystal structure. Although the FS and electronic structure possess a nearly four-fold symmetry, RTe3s form an incommensurate CDW.This dissertation is structured as follows: Chapter 1 includes basic ideas of Quantum materials, followed by an introduction to CDW and RTe3s. In Chapter 2, there are fundamentals of crystal growth by Chemical Vapor Transport, including various precursors, transport agent, temperature gradient, and rate of the reaction. After the growth, the crystals were confirmed for lattice vibrations by Raman, for composition by Energy Dispersive Spectroscopy; crystal structure and orientation were confirmed by X-ray Diffraction; magnetic ordering was established by Vibrating sample measurement. Detailed CDW study was done on various RTe3s by Raman spectroscopy. The basic mechanism and instrumentations used in these characterizations are explained in Chapter 3. Chapter 4 includes experimental data for crystal growth and results of these characterizations for Parent RTe3s. Chapter 5 includes fundamental insights on Cationic alloying of RTe3s, along with one alloy system’s crystal growth and characterization. This work tries to explain the behavior of CDW by a Temperature-dependent Raman study of RTe3s established the CDW transition temperature accompanied by Phonon softening; Angle-resolved Raman data confirming the nearly four-fold symmetry; thickness-dependent Raman spectroscopy resulting in the conclusion that as thickness decreases CDW transition temperature increases. Also, CDW transition is analyzed as a function of alloying.
ContributorsAttarde, Yashika (Author) / Tongay, Sefaattin (Thesis advisor) / Botana, Antia (Committee member) / Alford, Terry (Committee member) / Arizona State University (Publisher)
Created2021
Description
Although previous studies have elucidated the role of position feedback in the regulation of movement, the specific contribution of Golgi tendon organs (GTO) in force feedback, especially in stabilizing voluntary limb movements, has remained theoretical due to limitations in experimental techniques. This study aims to establish force feedback regulation mediated by GTO afferent signals in two phases. The first phase of this study consisted of simulations using a neuromusculoskeletal model of the monoarticular elbow flexor (MEF) muscle group, assess the impact of force feedback in maintaining steady state interaction forces against variable environmental stiffness. Three models were trained to accurately reach an interaction force of 40N, 50N and 60N respectively, using a fixed stiffness level. Next, the environment stiffness was switched between untrained levels for open loop (OL) and closed loop (CL) variants of the same model. Results showed that compared to OL, CL showed decreased force deviations by 10.43%, 12.11% and 13.02% for each of the models. Most importantly, it is also observed that in the absence of force feedback, environment stiffness is found to have an effect on the interaction force. In the second phase, human subjects were engaged in experiments utilizing an instrumented elbow exoskeleton that applied loads to the MEF muscle group, closely mimicking the simulation conditions. The experiments consisted of reference, blind and catch trial types, and 3 stiffness levels. Subjects were first trained to reach for a predetermined target force. During catch trials, stiffness levels were randomized between reaches. Responses obtained from these experiments showed that subjects were able to regulate forces with no significant effects of trial type or stiffness level. Since experimental results align closely with that of closed loop model simulations, the presence of force feedback mechanisms mediated by GTO within the human neuromuscular system is established. This study not only unveils the critical involvement of GTO in force feedback but also emphasizes the importance of understanding these mechanisms for developing advanced neuroprosthetics and rehabilitation strategies, shedding light on the intricate interplay between sensory inputs and motor responses in human proprioception.
ContributorsAbishek, Kevin (Author) / Lee, Hyunglae (Thesis advisor) / Buneo, Christopher (Committee member) / Santello, Marco (Committee member) / Arizona State University (Publisher)
Created2023
Description
In the last few decades, extensive research efforts have been focused on scaling down silicon-based complementary metal-oxide semiconductor (CMOS) technology to enable the continuation of Moore’s law. State-of-art CMOS includes fully depleted silicon-on-insulator (FDSOI) field-effect-transistors (FETs) with ultra-thin silicon channels (6 nm), as well as other three-dimensional (3D) device architectures like Fin-FETs, nanosheet FETs, etc. Significant research efforts have characterized these technologies towards various applications, and at different conditions including a wide range of temperatures from room temperature (300 K) down to cryogenic temperatures. Theoretical efforts have studied ultrascaled devices using Landauer theory to further understand their transport properties and predict their performance in the quasi-ballistic regime.Further scaling of CMOS devices requires the introduction of new semiconducting channel materials, as now established by the research community. Here, two-dimensional (2D) semiconductors have emerged as a promising candidate to replace silicon for next-generation ultrascaled CMOS devices. These emerging 2D semiconductors also have applications beyond CMOS, for example in novel memory, neuromorphic, and spintronic devices. Graphene is a promising candidate for spintronic devices due to its outstanding spin transport properties as evidenced by numerous studies in non-local lateral spin valve (LSV) geometries. The essential components of graphene-based LSV, such as graphene FETs, metal-graphene contacts, and tunneling barriers, were individually investigated as part of this doctoral dissertation.
In this work, several contributions were made to these CMOS and beyond CMOS technologies. This includes comprehensive characterization and modeling of FDSOI nanoscale FETs from room temperature down to cryogenic temperatures. Using Landauer theory for nanoscale transistors, FDSOI devices were analyzed and modeled under quasi-ballistic operation. This was extended towards a virtual-source modeling approach that accounts for temperature-dependent quasi-ballistic transport and back-gate biasing effects. Additionally, graphene devices with ultrathin high-k gate dielectrics were investigated towards FETs, non-volatile memory, and spintronic devices. New contributions were made relating to charge trapping effects and their impact on graphene device electrostatics (Dirac voltage shifts) and transport properties (impact on mobility and conductivity). This work also studied contact resistance and tunneling effects using transfer length method (TLM) graphene FET structures and magnetic tunneling junction (MTJ) towards graphene-based LSV.
ContributorsZhou, Guantong (Author) / Sanchez Esqueda, Ivan (Thesis advisor) / Vasileska, Dragica (Committee member) / Tongay, Sefaattin (Committee member) / Thornton, Trevor (Committee member) / Arizona State University (Publisher)
Created2023