Matching Items (128)
148155-Thumbnail Image.png
Description

A novel concept for integration of flame-assisted fuel cells (FFC) with a gas turbine is analyzed in this paper. Six different fuels (CH4, C3H8, JP-4, JP-5, JP-10(L), and H2) are investigated for the analytical model of the FFC integrated gas turbine hybrid system. As equivalence ratio increases, the efficiency of

A novel concept for integration of flame-assisted fuel cells (FFC) with a gas turbine is analyzed in this paper. Six different fuels (CH4, C3H8, JP-4, JP-5, JP-10(L), and H2) are investigated for the analytical model of the FFC integrated gas turbine hybrid system. As equivalence ratio increases, the efficiency of the hybrid system increases initially then decreases because the decreasing flow rate of air begins to outweigh the increasing hydrogen concentration. This occurs at an equivalence ratio of 2 for CH4. The thermodynamic cycle is analyzed using a temperature entropy diagram and a pressure volume diagram. These thermodynamic diagrams show as equivalence ratio increases, the power generated by the turbine in the hybrid setup decreases. Thermodynamic analysis was performed to verify that energy is conserved and the total chemical energy going into the system was equal to the heat rejected by the system plus the power generated by the system. Of the six fuels, the hybrid system performs best with H2 as the fuel. The electrical efficiency with H2 is predicted to be 27%, CH4 is 24%, C3H8 is 22%, JP-4 is 21%, JP-5 is 20%, and JP-10(L) is 20%. When H2 fuel is used, the overall integrated system is predicted to be 24.5% more efficient than the standard gas turbine system. The integrated system is predicted to be 23.0% more efficient with CH4, 21.9% more efficient with C3H8, 22.7% more efficient with JP-4, 21.3% more efficient with JP-5, and 20.8% more efficient with JP-10(L). The sensitivity of the model is investigated using various fuel utilizations. When CH4 fuel is used, the integrated system is predicted to be 22.7% more efficient with a fuel utilization efficiency of 90% compared to that of 30%.

ContributorsRupiper, Lauren Nicole (Author) / Milcarek, Ryan (Thesis director) / Wang, Liping (Committee member) / Mechanical and Aerospace Engineering Program (Contributor) / School for Engineering of Matter,Transport & Enrgy (Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
151734-Thumbnail Image.png
Description
A void exists in public administration, criminology, and criminal justice research as it relates to the study of power in American policing agencies. This has significant ramifications for academia and practitioners in terms of how they view, address, study, and interpret behaviors/actions in American policing agencies and organizations in general.

A void exists in public administration, criminology, and criminal justice research as it relates to the study of power in American policing agencies. This has significant ramifications for academia and practitioners in terms of how they view, address, study, and interpret behaviors/actions in American policing agencies and organizations in general. In brief, mainstream research on power in organizations does not take into account relationships of power that do not act directly, and immediately, on others. By placing its emphasis on an agency centric perspective of power, the mainstream approach to the study of power fails to recognize indirect power relationships that influence discourse, pedagogy, mechanisms of communication, knowledge, and individual behavior/actions. In support of a more holistic inquiry, this study incorporates a Foucauldian perspective of power along with an ethnographical methodology and methods to build a greater understanding of power in policing organizations. This ethnography of an American policing organization illuminates the relationship between the exercise of power and the objectification of the subject through the interplay of relationships of communication, goal oriented activities, and relationships of power. Specifically, the findings demonstrate that sworn officers and civilian employees are objectified distinctly and dissimilarly. In summary, this study argues that the exercise of power in this American policing organization objectifies the civilian employee as a second class citizen.
ContributorsBentley, Paul C (Author) / Catlaw, Thomas (Thesis advisor) / Musheno, Michael (Committee member) / Lucio, Joanna (Committee member) / Arizona State University (Publisher)
Created2013
152239-Thumbnail Image.png
Description
Production from a high pressure gas well at a high production-rate encounters the risk of operating near the choking condition for a compressible flow in porous media. The unbounded gas pressure gradient near the point of choking, which is located near the wellbore, generates an effective tensile stress on the

Production from a high pressure gas well at a high production-rate encounters the risk of operating near the choking condition for a compressible flow in porous media. The unbounded gas pressure gradient near the point of choking, which is located near the wellbore, generates an effective tensile stress on the porous rock frame. This tensile stress almost always exceeds the tensile strength of the rock and it causes a tensile failure of the rock, leading to wellbore instability. In a porous rock, not all pores are choked at the same flow rate, and when just one pore is choked, the flow through the entire porous medium should be considered choked as the gas pressure gradient at the point of choking becomes singular. This thesis investigates the choking condition for compressible gas flow in a single microscopic pore. Quasi-one-dimensional analysis and axisymmetric numerical simulations of compressible gas flow in a pore scale varicose tube with a number of bumps are carried out, and the local Mach number and pressure along the tube are computed for the flow near choking condition. The effects of tube length, inlet-to-outlet pressure ratio, the number of bumps and the amplitude of the bumps on the choking condition are obtained. These critical values provide guidance for avoiding the choking condition in practice.
ContributorsYuan, Jing (Author) / Chen, Kangping (Thesis advisor) / Wang, Liping (Committee member) / Huang, Huei-Ping (Committee member) / Arizona State University (Publisher)
Created2013
151917-Thumbnail Image.png
Description
Mixed-income housing policy has been an approach to address the problem of concentrated poverty since the 1990s. The idea of income mix in housing is founded on the proposition that economic opportunities of the poor can be expanded through the increasing of their social capital. The current in-depth case study

Mixed-income housing policy has been an approach to address the problem of concentrated poverty since the 1990s. The idea of income mix in housing is founded on the proposition that economic opportunities of the poor can be expanded through the increasing of their social capital. The current in-depth case study of Vineyard Estates, a mixed-income housing development in Phoenix, AZ tests a hypothesis that low-income people improve their chances of upward social mobility by building ties with more affluent residents within the development. This study combines qualitative and quantitative methods to collect and analyze information including analysis of demographic data, resident survey and in-depth semi-structured interviews with residents, as well as direct observations. It focuses on examining the role of social networks established within the housing development in generating positive economic outcomes of the poor. It also analyzes the role of factors influencing interactions across income groups and barriers to upward social mobility. Study findings do not support that living in mixed-income housing facilitates residents' upward social mobility. The study concludes that chances of upward social mobility are restrained by structural factors and indicates a need to rethink the effectiveness of mixed-income housing as an approach for alleviating poverty.
ContributorsDurova, Aleksandra (Author) / Kamel, Nabil (Committee member) / Pfeiffer, Deirdre (Committee member) / Lucio, Joanna (Committee member) / Arizona State University (Publisher)
Created2013
151485-Thumbnail Image.png
Description
Tesla turbo-machinery offers a robust, easily manufactured, extremely versatile prime mover with inherent capabilities making it perhaps the best, if not the only, solution for certain niche applications. The goal of this thesis is not to optimize the performance of the Tesla turbine, but to compare its performance with various

Tesla turbo-machinery offers a robust, easily manufactured, extremely versatile prime mover with inherent capabilities making it perhaps the best, if not the only, solution for certain niche applications. The goal of this thesis is not to optimize the performance of the Tesla turbine, but to compare its performance with various working fluids. Theoretical and experimental analyses of a turbine-generator assembly utilizing compressed air, saturated steam and water as the working fluids were performed and are presented in this work. A brief background and explanation of the technology is provided along with potential applications. A theoretical thermodynamic analysis is outlined, resulting in turbine and rotor efficiencies, power outputs and Reynolds numbers calculated for the turbine for various combinations of working fluids and inlet nozzles. The results indicate the turbine is capable of achieving a turbine efficiency of 31.17 ± 3.61% and an estimated rotor efficiency 95 ± 9.32%. These efficiencies are promising considering the numerous losses still present in the current design. Calculation of the Reynolds number provided some capability to determine the flow behavior and how that behavior impacts the performance and efficiency of the Tesla turbine. It was determined that turbulence in the flow is essential to achieving high power outputs and high efficiency. Although the efficiency, after peaking, begins to slightly taper off as the flow becomes increasingly turbulent, the power output maintains a steady linear increase.
ContributorsPeshlakai, Aaron (Author) / Phelan, Patrick (Thesis advisor) / Trimble, Steve (Committee member) / Wang, Liping (Committee member) / Arizona State University (Publisher)
Created2012
150959-Thumbnail Image.png
Description
Government performance and accountability have grown to be predominant areas within public administration literature over the last forty years. The research presented in this dissertation examines the relationship between citizen satisfaction and local government performance. Citizen review of service delivery provides vital feedback that facilitates better resource management within local

Government performance and accountability have grown to be predominant areas within public administration literature over the last forty years. The research presented in this dissertation examines the relationship between citizen satisfaction and local government performance. Citizen review of service delivery provides vital feedback that facilitates better resource management within local government. Using data from a single jurisdiction, two aspects of citizen satisfaction are reviewed. This includes citizen review of overall city performance, and citizen satisfaction with individual service delivery. Logit regression analysis is used to test several factors that affect citizen evaluation of service delivery in local government, while ordinary least squares regression is used to test the relationship between personal factors and citizen evaluation of specific local services. The results generated four major findings that contribute to the scholarly body of knowledge and local government knowledge application. First, citizens who are predisposed to supporting the local jurisdiction are more likely to rate service delivery high. Second, customer service is important. Third, those who experience government services similarly will collectively react similarly to the service experience. Finally, the length of residency has an impact on satisfaction levels with specific services. Implications for the literature as well as for practice are discussed.
ContributorsMcNamara, Catherine (Author) / Alozie, Nicholas O (Thesis advisor) / Cayer, Joseph (Thesis advisor) / Lucio, Joanna (Committee member) / Arizona State University (Publisher)
Created2012
148412-Thumbnail Image.png
Description

This work summarizes the development of a dynamic measurement platform in a cryostat to measure sample temperature response to space-like conditions and the creation a MATLAB theoretical model to predict sample temperature responses in the platform itself. An interesting variable-emittance sample called a Fabry-Perot emitter was studied for its thermal

This work summarizes the development of a dynamic measurement platform in a cryostat to measure sample temperature response to space-like conditions and the creation a MATLAB theoretical model to predict sample temperature responses in the platform itself. An interesting variable-emittance sample called a Fabry-Perot emitter was studied for its thermal homeostasis behavior using the two developments. Using the measurement platform, it was shown that there was no thermal homeostatic behavior demonstrated by the sample at steady state temperatures. Theoretical calculations show other ways to demonstrate the cooling homeostasis behavior through time-varying heat inputs. Factors within the system such as heat loss and thermal mass contributed to an inhibited sample performance in the platform. Future work will have to be conducted, not only to verify the findings of the initial experiments but also to improve the measurement platform and the theoretical model.

ContributorsBoman, Neal D (Author) / Wang, Liping (Thesis director) / Taylor, Syndey (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
148418-Thumbnail Image.png
Description

A thermochromic mid-infrared filter is designed, where a spectrally-selective transmittance peak exists while vanadium dioxide layers are below their transition temperature but broad opaqueness is observed below the transition temperature. This filter takes advantage of interference effects between a silicon spacer and insulating vanadium dioxide to create the transmittance peak

A thermochromic mid-infrared filter is designed, where a spectrally-selective transmittance peak exists while vanadium dioxide layers are below their transition temperature but broad opaqueness is observed below the transition temperature. This filter takes advantage of interference effects between a silicon spacer and insulating vanadium dioxide to create the transmittance peak and the drastic optical property change between insulating and metallic vanadium dioxide. The theoretical performance of the filter in energy dissipation and thermal camouflaging applications is analyzed and can be optimized by tuning the thicknesses of the thin-film layers.

ContributorsChao, Jeremy (Author) / Wang, Liping (Thesis director) / Taylor, Sydney (Committee member) / Mechanical and Aerospace Engineering Program (Contributor, Contributor) / Barrett, The Honors College (Contributor)
Created2021-05
135800-Thumbnail Image.png
Description
With more than one third of Americans considered to be obese, obesity is a public health issue in the United States. While obesity is linked to and caused by a number of factors, sugar sweetened beverage (SSB) consumption is a major contributor to increased obesity rates. For the purposes of

With more than one third of Americans considered to be obese, obesity is a public health issue in the United States. While obesity is linked to and caused by a number of factors, sugar sweetened beverage (SSB) consumption is a major contributor to increased obesity rates. For the purposes of this paper, SSBs will include any beverage in which sugar is added. This includes juices that are not 100% fruit juice, coffee or tea drinks that are sugar sweetened, energy or sport drinks, and most commonly, soda. Excess sugar in the diet is substantially linked to obesity and negative health effects. SSBs represent the primary source of added sugar in the average American diet. Part I of this paper will discuss obesity as a public health problem and establish the link between consumption of SSBs and poor health effects. Part II will discuss the public policy instrument families and the strengths and weaknesses of each policy approach. Part III will identify current policies specifically focused on curbing SSB consumption. Each policy will be analyzed for efficacy based on available scientific research. Lastly, Part IV will propose new policy alternatives and ways to improve current policies. A final policy recommendation will be presented as an ideal roadmap for policy makers looking to address the link between SSB consumption and obesity.
ContributorsSaria, Matthew Ricardo (Author) / Lucio, Joanna (Thesis director) / Holland, Thomas (Committee member) / School of Public Affairs (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
135609-Thumbnail Image.png
Description
Zeolitic Imidazolate Frameworks (ZIFs) are a promising technology for the separation of gases. ZIFs represent a type of hybrid material that is a subset of metal organic frameworks while displaying zeolite properties. ZIFs have tunable pore metrics, high thermal stability, and large surface areas giving them advantages over traditional zeolites.

Zeolitic Imidazolate Frameworks (ZIFs) are a promising technology for the separation of gases. ZIFs represent a type of hybrid material that is a subset of metal organic frameworks while displaying zeolite properties. ZIFs have tunable pore metrics, high thermal stability, and large surface areas giving them advantages over traditional zeolites. The experiment sought to determine the flux of hexane vapor through ZIF-68 with Fourier Transform Infrared Spectroscopy (FTIR) mapping. FTIR mapping was used to obtain three spectra per crystal and the concentration gradient was analyzed to determine the flux. ZIF-68 was completely stable when loaded with hexane and exposed to the atmosphere. There was no hexane diffusion out of the crystal. As a result, ZIF-68 was heated to 50°C to increase diffusion and calculate the flux. ZIF-68 adhered to Knudsen Diffusion, and the flux was calculated to be 2.00*10-5 kg mol/s*m2. The small flux occurred because almost no concentration gradient was obtained through the crystal. It was hypothesized that the resistance in the crystal was substantially lower than the resistance at the boundary layer, which would have caused a small concentration gradient. Using film mass transfer theory, the resistance inside the crystal was found to be 1200 times lower than the resistance at the boundary layer confirming the hypothesis.
ContributorsSigrist, Dallas Dale (Author) / Lin, Jerry (Thesis director) / Wang, Liping (Committee member) / Chemical Engineering Program (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05