Matching Items (116)
Description
Filtration for microfluidic sample-collection devices is desirable for sample selection, concentration, preprocessing, and downstream manipulation, but microfabricating the required sub-micrometer filtration structure is an elaborate process. This thesis presents a simple method to fabricate polydimethylsiloxane (PDMS) devices with an integrated membrane filter that will sample, lyse, and extract the DNA from microorganisms in aqueous environments. An off-the-shelf membrane filter disc was embedded in a PDMS layer and sequentially bound with other PDMS channel layers. No leakage was observed during filtration. This device was validated by concentrating a large amount of cyanobacterium Synechocystis in simulated sample water with consistent performance across devices. After accumulating sufficient biomass on the filter, a sequential electrochemical lysing process was performed by applying 5VDC across the filter. This device was further evaluated by delivering several samples of differing concentrations of cyanobacterium Synechocystis then quantifying the DNA using real-time PCR. Lastly, an environmental sample was run through the device and the amount of photosynthetic microorganisms present in the water was determined. The major breakthroughs in this design are low energy demand, cheap materials, simple design, straightforward fabrication, and robust performance, together enabling wide-utility of similar chip-based devices for field-deployable operations in environmental micro-biotechnology.
ContributorsLecluse, Aurelie (Author) / Meldrum, Deirdre (Thesis advisor) / Chao, Joseph (Thesis advisor) / Westerhoff, Paul (Committee member) / Arizona State University (Publisher)
Created2011
Description
Single cell phenotypic heterogeneity studies reveal more information about the pathogenesis process than conventional bulk methods. Furthermore, investigation of the individual cellular response mechanism during rapid environmental changes can only be achieved at single cell level. By enabling the study of cellular morphology, a single cell three-dimensional (3D) imaging system can be used to diagnose fatal diseases, such as cancer, at an early stage. One proven method, CellCT, accomplishes 3D imaging by rotating a single cell around a fixed axis. However, some existing cell rotating mechanisms require either intricate microfabrication, and some fail to provide a suitable environment for living cells. This thesis develops a microvorterx chamber that allows living cells to be rotated by hydrodynamic alone while facilitating imaging access. In this thesis work, 1) the new chamber design was developed through numerical simulation. Simulations revealed that in order to form a microvortex in the side chamber, the ratio of the chamber opening to the channel width must be smaller than one. After comparing different chamber designs, the trapezoidal side chamber was selected because it demonstrated controllable circulation and met the imaging requirements. Microvortex properties were not sensitive to the chambers with interface angles ranging from 0.32 to 0.64. A similar trend was observed when chamber heights were larger than chamber opening. 2) Micro-particle image velocimetry was used to characterize microvortices and validate simulation results. Agreement between experimentation and simulation confirmed that numerical simulation was an effective method for chamber design. 3) Finally, cell rotation experiments were performed in the trapezoidal side chamber. The experimental results demonstrated cell rotational rates ranging from 12 to 29 rpm for regular cells. With a volumetric flow rate of 0.5 µL/s, an irregular cell rotated at a mean rate of 97 ± 3 rpm. Rotational rates can be changed by altering inlet flow rates.
ContributorsZhang, Wenjie (Author) / Frakes, David (Thesis advisor) / Meldrum, Deirdre (Thesis advisor) / Chao, Shih-hui (Committee member) / Wang, Xiao (Committee member) / Arizona State University (Publisher)
Created2011
Description
In order to be competitive in the hotel market, more and more hotels have proposed various types of "wow" services to inform customers' impressions of the hotel in a positive way. Many customers consider these services excellent, and they often exceed their expectations. However, some "wow" services only generate the effect of amazement instead of meeting customers' needs and wants. Applying the notion of the Zone of Tolerance (ZOT: the range between customers' desired and adequate levels of service expectations) to the unique services provided by the Hotel Royal Chiao Hsi Spa in Taiwan, this research study explores hotel customers' service expectations and perceived service quality while revealing the relationship between service quality, satisfaction, and future behavioral intentions. The findings indicate that the ZOT indeed exists in customers' service expectations through the significant difference between the desired and adequate levels of expectations. In addition, findings indicate that customers have diverse tolerance zones toward different hotel services regarding the perceived level of essentialness. Ultimately, the findings specify that customers' perceived service quality has a direct effect on both customer satisfaction and future behavioral intentions.
ContributorsChiu, Chien-Fen (Author) / Lee, Woojin (Thesis advisor) / Larsen, Dale (Committee member) / Tyrrell, Timothy (Committee member) / Kim, Yushim (Committee member) / Arizona State University (Publisher)
Created2013
Description
The problem of the study was to investigate constraints and facilitators of Mexican American parents when deciding whether or not to enroll their children in formal swim lessons as a means of drowning prevention. The information obtained by this study (1) helps create awareness about youth drowning incidents and (2) provides insight about Mexican American perspectives and behaviors toward drowning prevention through, or not through as the case may be, youth formal swim lesson participation. This study's sample was purposively selected using typical case and snowball sampling techniques. Individual interviews were conducted with Mexican American parent participants and focus group interviews were conducted with aquatic personnel. From April to August, individual and focus group interviews were conducted in the border towns Sierra Vista, Bisbee, and Douglas in the state of Arizona. There were a total of 25 Mexican American parent participants: 10 had never enrolled their children in swim lessons and 15 had experience enrolling and observing their children in swim lessons. There were 3 focus groups interviews of aquatic personnel experts: Sierra Vista had 6, Bisbee had 7 and Douglas had 9 participants. The theory used to identify and classify the types of constraints and facilitators described in the findings of this study was the Leisure Constraints Theory proposed by Crawford, Jackson and Godbey, 1991. Finding from this study suggest that despite the uncommon perception, Mexican Americans youth are actually participating more in formal swim lessons than they have in past generations. Mexican American families in this sample reported major constraints for formal swim lessons as a reliance on learning form family and friends, swimming at private pools, money, time, and transportation as barriers to participation. Facilitators for Mexican American youth to participate in formal swim lessons are youth drowning awareness, education, lack of parental swimming ability, generational social norm behavior changes, financial assistance and an attitude shift in favor of formal swim lessons.
ContributorsMurphy, Megan Kay (Author) / Rodriguez, Ariel (Thesis advisor) / Zayas, Luis (Committee member) / Larsen, Dale (Committee member) / Arizona State University (Publisher)
Created2013
Description
Laboratory automation systems have seen a lot of technological advances in recent times. As a result, the software that is written for them are becoming increasingly sophisticated. Existing software architectures and standards are targeted to a wider domain of software development and need to be customized in order to use them for developing software for laboratory automation systems. This thesis proposes an architecture that is based on existing software architectural paradigms and is specifically tailored to developing software for a laboratory automation system. The architecture is based on fairly autonomous software components that can be distributed across multiple computers. The components in the architecture make use of asynchronous communication methodologies that are facilitated by passing messages between one another. The architecture can be used to develop software that is distributed, responsive and thread-safe. The thesis also proposes a framework that has been developed to implement the ideas proposed by the architecture. The framework is used to develop software that is scalable, distributed, responsive and thread-safe. The framework currently has components to control very commonly used laboratory automation devices such as mechanical stages, cameras, and also to do common laboratory automation functionalities such as imaging.
ContributorsKuppuswamy, Venkataramanan (Author) / Meldrum, Deirdre (Thesis advisor) / Collofello, James (Thesis advisor) / Sarjoughian, Hessam S. (Committee member) / Johnson, Roger (Committee member) / Arizona State University (Publisher)
Created2012
Description
Commitment to an activity is widely studied in leisure research. Serious Leisure Perspective (SLP) describes characteristics a committed activity participant possesses. The Psychological Continuum Model (PCM) describes the psychological process a person goes through to become committed to a leisure activity. Awareness, attraction, attachment and loyalty make of the four stages of PCM. Both perspectives have been used to describe committed leisure activity participants and commitment to organized recreational events. Research on leisure activity has yet to determine how the individual becomes loyal. Therefore, the purpose of this study is to determine the process in which recreation activity participates becomes loyal and to identify who can be labels as serious within the PCM Framework. Data was obtained from an online electronic survey distributed to participants of four U.S. marathon and half marathon events. A total of 579 responses were used in the final analysis. Path analysis determined the process in which a runner becomes committed. MANOVA is used to determine difference between leisure groups in the four stages of PCM. Results indicate that activity participants need to go through all four stages of PCM before becoming loyal. As knowledge increases, individuals are more motivated to participate. When the activity satisfies motives and becomes a reflection of their identity, feelings become stronger which results in loyalty. Socialization is instrumental to the progression through the PCM Framework. Additionally, attachment is the "bottleneck" in which all loyal activity participants my pass through. Differences exist between serious leisure groups in the attachment and loyalty stages. Those that are `less serious' are not as committed to the activity as their counterparts.
ContributorsMurphey, Elizabeth M (Author) / Lee, Woojin (Thesis advisor) / Hultsman, Wendy (Thesis advisor) / Larsen, Dale (Committee member) / Chisum, Jack (Committee member) / Arizona State University (Publisher)
Created2014
Description
Single cell analysis has become increasingly important in understanding disease onset, progression, treatment and prognosis, especially when applied to cancer where cellular responses are highly heterogeneous. Through the advent of single cell computerized tomography (Cell-CT), researchers and clinicians now have the ability to obtain high resolution three-dimensional (3D) reconstructions of single cells. Yet to date, no live-cell compatible version of the technology exists. In this thesis, a microfluidic chip with the ability to rotate live single cells in hydrodynamic microvortices about an axis parallel to the optical focal plane has been demonstrated. The chip utilizes a novel 3D microchamber design arranged beneath a main channel creating flow detachment into the chamber, producing recirculating flow conditions. Single cells are flowed through the main channel, held in the center of the microvortex by an optical trap, and rotated by the forces induced by the recirculating fluid flow. Computational fluid dynamics (CFD) was employed to optimize the geometry of the microchamber. Two methods for the fabrication of the 3D microchamber were devised: anisotropic etching of silicon and backside diffuser photolithography (BDPL). First, the optimization of the silicon etching conditions was demonstrated through design of experiment (DOE). In addition, a non-conventional method of soft-lithography was demonstrated which incorporates the use of two positive molds, one of the main channel and the other of the microchambers, compressed together during replication to produce a single ultra-thin (<200 µm) negative used for device assembly. Second, methods for using thick negative photoresists such as SU-8 with BDPL have been developed which include a new simple and effective method for promoting the adhesion of SU-8 to glass. An assembly method that bonds two individual ultra-thin (<100 µm) replications of the channel and the microfeatures has also been demonstrated. Finally, a pressure driven pumping system with nanoliter per minute flow rate regulation, sub-second response times, and < 3% flow variability has been designed and characterized. The fabrication and assembly of this device is inexpensive and utilizes simple variants of conventional microfluidic fabrication techniques, making it easily accessible to the single cell analysis community.
ContributorsMyers, Jakrey R (Author) / Meldrum, Deirdre (Thesis advisor) / Johnson, Roger (Committee member) / Frakes, David (Committee member) / Arizona State University (Publisher)
Created2012
Description
The purpose of this study is to first investigate the role of political socialization on young men and women and what motivates them to become politically active and make the ultimate decision to run for elected office. These effects include parental attitudes, exposure to political shows and news sources, participation in voluntary organizations, and overall community involvement. After understanding these direct and indirect effects of political socialization, I can attempt to explain the causes for the gender gap in political ambition \u2014 meaning that significantly more men are running for elected office compared to women.
ContributorsOsgood, Shannon Marie (Author) / Woodall, Gina (Thesis director) / Herrera, Richard (Committee member) / Barrett, The Honors College (Contributor) / College of Public Service and Community Solutions (Contributor) / School of Public Affairs (Contributor) / School of Politics and Global Studies (Contributor)
Created2015-05
Description
The Undoing Project is an ongoing educational feminist YouTube channel that serves as an introduction to feminism and feminist theory. The objective for this project is to present feminist theory and feminist ideology in an accessible and entertaining way. Through this project I sought to accomplish three goals: to challenge the negative image of feminism, bridge the gap between the language of academia and the public, and to acknowledge and unlearn ingrained prejudices. The videos focus on theory, history, legislation, current events, and pop culture. The initial project consists of ten videos addressing the feminist wave models, a brief history of the feminist movement, and discussions of concepts like hegemony, intersectionality, masculinity, femininity, and race.
ContributorsBuchholtz, Kaylee Marie (Author) / Brian, Jennifer (Thesis director) / Grzanka, Patrick (Committee member) / Brouwer, Dan (Committee member) / Barrett, The Honors College (Contributor) / College of Public Service and Community Solutions (Contributor) / School of Social Transformation (Contributor) / Department of English (Contributor)
Created2015-05
Description
Previous research has found improvements in motor and cognitive measures following Assisted Cycle Therapy (AC) in adolescence with Down syndrome (DS). Our study investigated whether we would find improvements in older adults with DS on measures of leisure physical activity (GLTEQ) and sleep, which are early indicators of Alzheimer's disease (AD) in persons with Down syndrome. This study consisted of eight participants with Down syndrome between 31 and 51 years old that cycled for 30 minutes 3 x/week for eight weeks either at their voluntary cycling rate (VC) or approximately 35% faster with the help of a mechanical motor (AC). We predicted that, based on pilot data (Gomez, 2015), GLTEQ would either maintain or improve after AC, but would decrease after VC and would stay the same after NC. We predicted that the sleep score may improve after both VC or AC or it may improve more after VC than AC based on pilot data related to leisure activity. Our results were consistent with our prediction that GLTEQ will either maintain or improve after AC but will decrease after VC. Our results were not consistent with our prediction that sleep may improve after both VC or AC or it may improve more after VC than AC, possibly because we did not pre-screen for sleep disorders. Future research should focus on recruiting more participants and using both objective and subjective measures of sleep and physical activity to improve the efficacy of the study.
ContributorsParker, Lucas Maury (Author) / Ringenbach, Shannon (Thesis director) / Buman, Matthew (Committee member) / Holzapfel, Simon (Committee member) / School of Social and Behavioral Sciences (Contributor) / School of Nutrition and Health Promotion (Contributor) / College of Public Service and Community Solutions (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05