Matching Items (987)
Description
ABSTRACT In this thesis, I probe into the ways in which the much-debated word Jihad lends itself to multifarious meanings within the Mourid Sufi Order and examine the foundations of the principles of peace and non-violence that informed the relationships between Cheikh Ahmadou Bamba, the founder of Mouridism (1853 ca - 1927) and the French colonial state from 1883 to 1927. As a matter of fact, unlike some Senegalese Muslim leaders who had waged a violent Jihad during the colonial conquest and expansion, Cheikh Ahmadou Bamba promoted peaceful forms of Jihad which partook of his reform and revival movement in the Senegalese society. Yet, it is worth pointing out that the Mourid leader's ethics of peace and philosophy of non-violence as methods of struggle (the etymological sense of the word Jihad) during colonial times have been largely unexplored within academia. The contours of these new forms of resistance were grounded on a peaceful and non-violent approach which, according to Cheikh Ahmadou Bamba, was the only way to reach his spiritual, educational and social goals. This thesis proffers a counter-example to religious violence often associated with and perpetrated in the name of Islam. I argue in this thesis that a close investigation into Cheikh Ahmadou Bamba's epistemology of Jihad evidences that the term Jihad has spiritual, educational, social, cultural and economic functions which naturally contrast with its one-sided and violent connotation spotlighted over the last two decades. In conducting research for this work, I used a transdisciplinary approach that can allow me to address the complex issues of Jihad, peace and non-violence in a more comprehensive way. Accordingly, I have used a methodology that crosses the boundaries of several disciplines (historical, anthropological, sociological and literary).
ContributorsSeye, Cheikh (Author) / Haines, Charles (Thesis advisor) / Gallab, Abdullahi (Committee member) / Talebi, Shahla (Committee member) / Saikia, Yasmin (Committee member) / Arizona State University (Publisher)
Created2013
Description
Waste heat energy conversion remains an inviting subject for research, given the renewed emphasis on energy efficiency and carbon emissions reduction. Solid-state thermoelectric devices have been widely investigated, but their practical application remains challenging because of cost and the inability to fabricate them in geometries that are easily compatible with heat sources. An intriguing alternative to solid-state thermoelectric devices is thermogalvanic cells, which include a generally liquid electrolyte that permits the transport of ions. Thermogalvanic cells have long been known in the electrochemistry community, but have not received much attention from the thermal transport community. This is surprising given that their performance is highly dependent on controlling both thermal and mass (ionic) transport. This research will focus on a research project, which is an interdisciplinary collaboration between mechanical engineering (i.e. thermal transport) and chemistry, and is a largely experimental effort aimed at improving fundamental understanding of thermogalvanic systems. The first part will discuss how a simple utilization of natural convection within the cell doubles the maximum power output of the cell. In the second part of the research, some of the results from the previous part will be applied in a feasibility study of incorporating thermogalvanic waste heat recovery systems into automobiles. Finally, a new approach to enhance Seebeck coefficient by tuning the configurational entropy of a mixed-ligand complex formation of copper sulfate aqueous electrolytes will be presented. Ultimately, a summary of these results as well as possible future work that can be formed from these efforts is discussed.
ContributorsGunawan, Andrey (Author) / Phelan, Patrick E (Thesis advisor) / Buttry, Daniel A (Committee member) / Mujica, Vladimiro (Committee member) / Chan, Candace K. (Committee member) / Wang, Robert Y (Committee member) / Arizona State University (Publisher)
Created2015
Description
The rapid progress of solution-phase synthesis has led colloidal nanocrystals one of the most versatile nanoscale materials, provided opportunities to tailor material's properties, and boosted related technological innovations. Colloidal nanocrystal-based materials have been demonstrated success in a variety of applications, such as LEDs, electronics, solar cells and thermoelectrics. In each of these applications, the thermal transport property plays a big role. An undesirable temperature rise due to inefficient heat dissipation could lead to deleterious effects on devices' performance and lifetime. Hence, the first project is focused on investigating the thermal transport in colloidal nanocrystal solids. This study answers the question that how the molecular structure of nanocrystals affect the thermal transport, and provides insights for future device designs. In particular, PbS nanocrystals is used as a monitoring system, and the core diameter, ligand length and ligand binding group are systematically varied to study the corresponding effect on thermal transport.
Next, a fundamental study is presented on the phase stability and solid-liquid transformation of metallic (In, Sn and Bi) colloidal nanocrystals. Although the phase change of nanoparticles has been a long-standing research topic, the melting behavior of colloidal nanocrytstals is largely unexplored. In addition, this study is of practical importance to nanocrystal-based applications that operate at elevated temperatures. Embedding colloidal nanocrystals into thermally-stable polymer matrices allows preserving nanocrystal size throughout melt-freeze cycles, and therefore enabling observation of stable melting features. Size-dependent melting temperature, melting enthalpy and melting entropy have all been measured and discussed.
In the next two chapters, focus has been switched to developing colloidal nanocrystal-based phase change composites for thermal energy storage applications. In Chapter 4, a polymer matrix phase change nanocomposite has been created. In this composite, the melting temperature and energy density could be independently controlled by tuning nanocrystal diameter and volume fractions. In Chapter 5, a solution-phase synthesis on metal matrix-metal nanocrytal composite is presented. This approach enables excellent morphological control over nanocrystals and demonstrated a phase change composite with a thermal conductivity 2 - 3 orders of magnitude greater than typical phase change materials, such as organics and molten salts.
Next, a fundamental study is presented on the phase stability and solid-liquid transformation of metallic (In, Sn and Bi) colloidal nanocrystals. Although the phase change of nanoparticles has been a long-standing research topic, the melting behavior of colloidal nanocrytstals is largely unexplored. In addition, this study is of practical importance to nanocrystal-based applications that operate at elevated temperatures. Embedding colloidal nanocrystals into thermally-stable polymer matrices allows preserving nanocrystal size throughout melt-freeze cycles, and therefore enabling observation of stable melting features. Size-dependent melting temperature, melting enthalpy and melting entropy have all been measured and discussed.
In the next two chapters, focus has been switched to developing colloidal nanocrystal-based phase change composites for thermal energy storage applications. In Chapter 4, a polymer matrix phase change nanocomposite has been created. In this composite, the melting temperature and energy density could be independently controlled by tuning nanocrystal diameter and volume fractions. In Chapter 5, a solution-phase synthesis on metal matrix-metal nanocrytal composite is presented. This approach enables excellent morphological control over nanocrystals and demonstrated a phase change composite with a thermal conductivity 2 - 3 orders of magnitude greater than typical phase change materials, such as organics and molten salts.
ContributorsLiu, Minglu (Author) / Wang, Robert Y (Thesis advisor) / Wang, Liping (Committee member) / Rykaczewski, Konrad (Committee member) / Phelan, Patrick (Committee member) / Dai, Lenore (Committee member) / Arizona State University (Publisher)
Created2015
Description
Soft polymer composites with improved thermal conductivity are needed for the thermal management of electronics. Interfacial thermal boundary resistance, however, prevents the efficient use of many high thermal conductivity fill materials. Magnetic alignment of ferrous fill material enforces percolation of the high thermal conductivity fill, thereby shifting the governing boundary resistance to the particle- particle interfaces and increasing the directional thermal conductivity of the polymer composite. Magnetic alignment maximizes the thermal conductivity while minimizing composite stiffening at a fill fraction of half the maximum packing factor. The directional thermal conductivity of the composite is improved by more than 2-fold. Particle-particle contact engineering is then introduced to decrease the particle- particle boundary resistance and further improve the thermal conductivity of the composite.
The interface between rigid fill particles is a point contact with very little interfacial area connecting them. Silver and gallium-based liquid metal (LM) coatings provide soft interfaces that, under pressure, increase the interfacial area between particles and decrease the particle-particle boundary resistance. These engineered contacts are investigated both in and out of the polymer matrix and with and without magnetic alignment of the fill. Magnetically aligned in the polymer matrix, 350nm- thick silver coatings on nickel particles produce a 1.8-fold increase in composite thermal conductivity over the aligned bare-nickel composites. The LM coatings provide similar enhancements, but require higher volumes of LM to do so. This is due to the rapid formation of gallium oxide, which introduces additional thermal boundaries and decreases the benefit of the LM coatings.
The oxide shell of LM droplets (LMDs) can be ruptured using pressure. The pressure needed to rupture LMDs matches closely to thin-walled pressure vessel theory. Furthermore, the addition of tungsten particles stabilizes the mixture for use at higher pressures. Finally, thiols and hydrochloric acid weaken the oxide shell and boost the thermal performance of the beds of LMDs by 50% at pressures much lower than 1 megapascal (MPa) to make them more suitable for use in TIMs.
The interface between rigid fill particles is a point contact with very little interfacial area connecting them. Silver and gallium-based liquid metal (LM) coatings provide soft interfaces that, under pressure, increase the interfacial area between particles and decrease the particle-particle boundary resistance. These engineered contacts are investigated both in and out of the polymer matrix and with and without magnetic alignment of the fill. Magnetically aligned in the polymer matrix, 350nm- thick silver coatings on nickel particles produce a 1.8-fold increase in composite thermal conductivity over the aligned bare-nickel composites. The LM coatings provide similar enhancements, but require higher volumes of LM to do so. This is due to the rapid formation of gallium oxide, which introduces additional thermal boundaries and decreases the benefit of the LM coatings.
The oxide shell of LM droplets (LMDs) can be ruptured using pressure. The pressure needed to rupture LMDs matches closely to thin-walled pressure vessel theory. Furthermore, the addition of tungsten particles stabilizes the mixture for use at higher pressures. Finally, thiols and hydrochloric acid weaken the oxide shell and boost the thermal performance of the beds of LMDs by 50% at pressures much lower than 1 megapascal (MPa) to make them more suitable for use in TIMs.
ContributorsRalphs, Matthew (Author) / Rykaczewski, Konrad (Thesis advisor) / Wang, Robert Y (Thesis advisor) / Phelan, Patrick (Committee member) / Wang, Liping (Committee member) / Devasenathipathy, Shankar (Committee member) / Arizona State University (Publisher)
Created2019
Description
Nations have a vital interest in creating a citizenry with certain attributes and beliefs and, since education contributes to the formation of children's national identity, government authorities can influence educational curricula to construct their ideal citizen. In this thesis, I study the educational systems of Pakistan and Arizona and explore the historical and conceptual origins of these entities' manipulation of curricula to construct a particular kind of citizen. I argue that an examination of the ethnic studies debate in Tucson, Arizona, in conjunction with Pakistan's history education policy, will illustrate that the educational systems in both these sites are developed to advance the interests of governing authorities. Resource material demonstrates that both educational systems endorse specific accounts of history, omitting information, perspectives, and beliefs. Eliminating or reimagining certain narratives of history alienates some students from identifying as citizens of the state, particularly when contributions of their ethnic, cultural, or religious groups are not included in the country's textbooks.
ContributorsFritcke, Emily Anne (Author) / Saikia, Yasmin (Thesis director) / Haines, Chad (Committee member) / Barrett, The Honors College (Contributor) / Department of English (Contributor) / School of Historical, Philosophical and Religious Studies (Contributor)
Created2014-12
Description
With the new independence of adulthood, college students are a group susceptible to adopting unsupported, if not harmful, health practices. A survey of Arizona State University undergraduate students (N=200) was conducted to evaluate supplement use, trust in information sources, and beliefs about supplement regulation. Of those who reported using supplements, college students most frequently received information from friends and family. STEM majors in fields unrelated to health who were taking a supplement were found to be less likely to receive information about the supplement from a medical practitioner than those in health fields or those in non-STEM majors (-26.9%, p=0.018). STEM majors in health-related fields were 15.0% more likely to treat colds and/or cold symptoms with research-supported methods identified from reliable sources, while non-health STEM and non-STEM majors were more likely to take unsupported cold treatments (p=0.010). Surveyed students, regardless of major, also stated they would trust a medical practitioner for supplement advice above other sources (88.0%), and the majority expressed a belief that dietary supplements are approved/regulated by the government (59.8%).
ContributorsPerez, Jacob Tanner (Author) / Hendrickson, Kirstin (Thesis director) / Lefler, Scott (Committee member) / College of Liberal Arts and Sciences (Contributor) / School of Molecular Sciences (Contributor) / Department of Physics (Contributor) / Barrett, The Honors College (Contributor)
Created2018-05
ContributorsChandler, N. Kayla (Author) / Neisewander, Janet (Thesis director) / Sanabria, Federico (Committee member) / Olive, M. Foster (Committee member) / Barrett, The Honors College (Contributor) / College of Liberal Arts and Sciences (Contributor)
Created2013-05
Description
I propose that norms regulate behaviors that negatively impact an individual's survival and reproduction. But because monitoring and enforcing of norms can be costly, individuals should be selective about which norms they police and under what circumstances they should do so. Two studies tested this idea by experimentally activating fitness-relevant motives and having participants answer questions about the policing of norms. The first study examined a norm prescribing respect for status and another proscribing sexual coercion. Results from Study 1 failed to support the hypotheses; activating a status-seeking motive did not have the predicted effects on policing of the respect-status norm nor did activating a mating motive have the predicted effects on policing of the respect-status norm or anti-coercion norm. Study 2 examined two new norms, one prescribing that people stay home when sick and the other proscribing people from having sex with another person's partners. Study 2 also manipulated whether self or others were the target of the policing. Study 2 failed to provide support; a disease avoidance motive failed to have effects on policing of the stay home when sick norm. Individuals in a relationship under a mating motive wanted less policing of others for violation of the mate poaching norm than those in a baseline condition, opposite of the predicted effects.
ContributorsSmith, M. Kristopher (Author) / Neuberg, L. Steven (Thesis director) / Presson, Clark (Committee member) / Hruschka, J. Daniel (Committee member) / Barrett, The Honors College (Contributor) / College of Liberal Arts and Sciences (Contributor)
Created2013-05
Description
Literature in public administration emphasizes a growing dissatisfaction with government on the part of residents. Where there tends to be a lack in the literature is in terms of solutions to this problem. We would like to argue that the engagement process itself has the power to foster a profound attitudinal shift on the part of both residents and government. This paper explores the structural and cultural barriers to satisfactory public engagement both from literature and a combination of policy analysis, semi-structured interviews and participatory observation within the City of Tempe. We then provide recommendations to the City of Tempe on how to overcome these barriers and effect authentic public engagement practices. With these new suggested practices and mindsets, we provide a way that people can have the power to create their own community.
ContributorsRiffle, Morgan (Co-author) / Tchida, Celina (Co-author) / Ingram-Waters, Mary (Thesis director) / Grzanka, Patrick (Committee member) / King, Cheryl (Committee member) / Barrett, The Honors College (Contributor) / College of Liberal Arts and Sciences (Contributor)
Created2013-05
Description
This thesis examines the relationship between unofficial, official, and parallel Islam in Uzbekistan following the end of the Soviet Union. Key touchstone moments in Uzbekistan during the twentieth-century show the history between unofficial and official Islam and the resulting precedents set for Muslims gathering against the government. This historical analysis shows how President Karimov and the Uzbek government view and approach Islam in the country following independence.
ContributorsTieslink, Evan (Author) / Batalden, Stephen (Thesis director) / Kefeli, Agnes (Committee member) / Saikia, Yasmin (Committee member) / Barrett, The Honors College (Contributor) / College of Liberal Arts and Sciences (Contributor) / School of Politics and Global Studies (Contributor) / School of Historical, Philosophical and Religious Studies (Contributor)
Created2013-05