Matching Items (286)
Description
The popularization of energy drink use as a supplement to exercise is steadily increasing, especially among young adult males. However, the effects of energy drinks on muscular performance in young adults have yet to be clearly elucidated. Eight male subjects (mean age: 23.3 ± 4.3 yrs, height: 181.0 ± 5.3 cm, fat percent 17.8 ± 5.2%, and weight 85.3 ± 12.6 kg) completed this randomized double-blinded cross over study. The purpose of this study was to determine differences in acute muscular strength and endurance and Profile of Mood States (POMS) scores between three treatments (RockStar, sugar-free RockStar, and sugar-free caffeine-free Placebo). It was hypothesized that there would be no significant differences in acute peak torque and endurance of the knee extensors and flexors or on fatigue and vigor subscores from the POMS questionnaire. Each man was tested randomly at least 1 week apart. Diet and time of day were held constant across trials. Peak torque of knee extensors and flexors at 60, 180, 240 degress/second and fatigue index and total work were calculated by performing 50 repetitions at 240 degrees/second. There were no significant differences in peak torque, fatigue index, or total work measures or in subjective measures of fatigue or vigor from the POMS between the treatments. This study indicates that RockStar energy drinks have no acute ergogenic effects in young men performing isokinetic strength or endurance testing.
ContributorsHawley, Michelle (Author) / Swan, Pamela (Thesis advisor) / Campbell, Kathryn (Committee member) / Johnston, Carol (Committee member) / Arizona State University (Publisher)
Created2012
Description
As engineered nanomaterials (NMs) become used in industry and commerce their loading to sewage will increase. However, the fate of widely used NMs in wastewater treatment plants (WWTPs) remains poorly understood. In this research, sequencing batch reactors (SBRs) were operated with hydraulic (HRT) and sludge (SRT) retention times representative of full-scale biological WWTPs for several weeks. NM loadings at the higher range of expected environmental concentrations were selected. To achieve the pseudo-equilibrium state concentration of NMs in biomass, SBR experiments needed to operate for more than three times the SRT value, approximately 18 days. Under the conditions tested, NMs had negligible effects on ability of the wastewater bacteria to biodegrade organic material, as measured by chemical oxygen demand (COD). NM mass balance closure was achieved by measuring NMs in liquid effluent and waste biosolids. All NMs were well removed at the typical biomass concentration (1~2 gSS/L). However, carboxy-terminated polymer coated silver nanoparticles (fn-Ag) were removed less effectively (88% removal) than hydroxylated fullerenes (fullerols; >90% removal), nano TiO2 (>95% removal) or aqueous fullerenes (nC60; >95% removal). Although most NMs did not settle out of the feed solution without bacteria present, approximately 65% of the titanium dioxide was removed even in the absence of biomass simply due to self-aggregation and settling. Experiments conducted over 4 months with daily loadings of nC60 showed that nC60 removal from solution depends on the biomass concentration. Under conditions representative of most suspended growth biological WWTPs (e.g., activated sludge), most of the NMs will accumulate in biosolids rather than in liquid effluent discharged to surface waters. Significant fractions of fn-Ag were associated with colloidal material which suggests that efficient particle separation processes (sedimentation or filtration) could further improve removal of NM from effluent. As most NMs appear to accumulate in biosolids, future research should examine the fate of NMs during disposal of WWTP biosolids, which may occur through composting or anaerobic digestion and/or land application, incineration, or landfill disposal.
ContributorsWang, Yifei (Author) / Westerhoff, Paul (Thesis advisor) / Krajmalnik-Brown, Rosa (Committee member) / Rittmann, Bruce (Committee member) / Hristovski, Kiril (Committee member) / Arizona State University (Publisher)
Created2012
Description
Group III-nitride semiconductors have wide application in optoelectronic devices. Spontaneous and piezoelectric polarization effects have been found to be critical for electric and optical properties of group III-nitrides. In this dissertation, firstly, the crystal orientation dependence of the polarization is calculated and in-plane polarization is revealed. The in-plane polarization is sensitive to the lateral characteristic dimension determined by the microstructure. Specific semi-polar plane growth is suggested for reducing quantum-confined Stark effect. The macroscopic electrostatic field from the polarization discontinuity in the heterostructures is discussed, b ased on that, the band diagram of InGaN/GaN quantum well/barrier and AlGaN/GaN heterojunction is obtained from the self-consistent solution of Schrodinger and Poisson equations. New device design such as triangular quantum well with the quenched polarization field is proposed. Electron holography in the transmission electron microscopy is used to examine the electrostatic potential under polarization effects. The measured potential energy profiles of heterostructure are compared with the band simulation, and evidences of two-dimensional hole gas (2DHG) in a wurtzite AlGaN/ AlN/ GaN superlattice, as well as quasi two-dimensional electron gas (2DEG) in a zinc-blende AlGaN/GaN are found. The large polarization discontinuity of AlN/GaN is the main source of the 2DHG of wurtzite nitrides, while the impurity introduced during the growth of AlGaN layer provides the donor states that to a great extent balance the free electrons in zinc-blende nitrides. It is also found that the quasi-2DEG concentration in zinc-blende AlGaN/GaN is about one order of magnitude lower than the wurtzite AlGaN/GaN, due to the absence of polarization. Finally, the InAlN/GaN lattice-matched epitaxy, which ideally has a zero piezoelectric polarization and strong spontaneous polarization, is experimentally studied. The breakdown in compositional homogeneity is triggered by threading dislocations with a screw component propagating from the GaN underlayer, which tend to open up into V-grooves at a certain thickness of the InxAl1-xN layer. The V-grooves coalesce at 200 nm and are filled with material that exhibits a significant drop in indium content and a broad luminescence peak. The structural breakdown is due to heterogeneous nucleation and growth at the facets of the V-grooves.
ContributorsWei, Qiyuan (Author) / Ponce, Fernando A. (Thesis advisor) / Tsen, Kong-Thon (Committee member) / Shumway, John (Committee member) / Menéndez, Jose (Committee member) / Smith, David (Committee member) / Arizona State University (Publisher)
Created2012
Description
In this work, the vapor transport and aerobic bio-attenuation of compounds from a multi-component petroleum vapor mixture were studied for six idealized lithologies in 1.8-m tall laboratory soil columns. Columns representing different geological settings were prepared using 20-40 mesh sand (medium-grained) and 16-minus mesh crushed granite (fine-grained). The contaminant vapor source was a liquid composed of twelve petroleum hydrocarbons common in weathered gasoline. It was placed in a chamber at the bottom of each column and the vapors diffused upward through the soil to the top where they were swept away with humidified gas. The experiment was conducted in three phases: i) nitrogen sweep gas; ii) air sweep gas; iii) vapor source concentrations decreased by ten times from the original concentrations and under air sweep gas. Oxygen, carbon dioxide and hydrocarbon concentrations were monitored over time. The data allowed determination of times to reach steady conditions, effluent mass emissions and concentration profiles. Times to reach near-steady conditions were consistent with theory and chemical-specific properties. First-order degradation rates were highest for straight-chain alkanes and aromatic hydrocarbons. Normalized effluent mass emissions were lower for lower source concentration and aerobic conditions. At the end of the study, soil core samples were taken every 6 in. Soil moisture content analyses showed that water had redistributed in the soil during the experiment. The soil at the bottom of the columns generally had higher moisture contents than initial values, and soil at the top had lower moisture contents. Profiles of the number of colony forming units of hydrocarbon-utilizing bacteria/g-soil indicated that the highest concentrations of degraders were located at the vertical intervals where maximum degradation activity was suggested by CO2 profiles. Finally, the near-steady conditions of each phase of the study were simulated using a three-dimensional transient numerical model. The model was fit to the Phase I data by adjusting soil properties, and then fit to Phase III data to obtain compound-specific first-order biodegradation rate constants ranging from 0.0 to 5.7x103 d-1.
ContributorsEscobar Melendez, Elsy (Author) / Johnson, Paul C. (Thesis advisor) / Andino, Jean (Committee member) / Forzani, Erica (Committee member) / Krajmalnik-Brown, Rosa (Committee member) / Kavazanjian, Edward (Committee member) / Arizona State University (Publisher)
Created2012
Description
Determining the factors associated with the availability of healthy and unhealthy foods in the household may help in understanding the varying complexities that contribute to obesity among children and help design interventions to impact children's food consumption behaviors. This study examined factors that are associated with the availability of healthy and unhealthy foods in children's home food environments (HFE). Data was collected from a random-digit-dial telephone survey of 1708 households, with at least one child between 3-18 years of age, located in five low-income New Jersey cities. HFE was assessed based on responses to a set of six items that measured availability of specific healthy and unhealthy foods in the respondent's home. These items contributed to construction of three HFE scales used as dependent variables in these analyses: healthy HFE, unhealthy HFE, and a ratio of healthy to unhealthy foods in the HFE. Independent variables included household socio-demographics, parental perceptions of their own weight and diet health, frequency of family meals, proximity to food outlets, and perception of access to healthy foods in the neighborhood food environment. Significant differences were observed in the HFE by race and ethnicity, with Non-Hispanic black children having fewer healthy foods and Non-Hispanic white children having more unhealthy food items available at home. Parents who reported being overweight or obese had a healthier HFE and those perceiving their own eating as healthy had more healthy and less unhealthy foods in the household. Food-secure households had more unhealthy compared to healthy foods at home. Households located farther from a supermarket had a greater number of unhealthy food items and a lower healthy/unhealthy food availability ratio. Parental perception of better access to fruits and vegetables and low-fat foods was associated with availability of a greater number of healthy food items at home. Overall, the HFE varied by parental and demographic characteristics, parental perceptions about the food environment and the actual features of the built neighborhood food environment.
ContributorsBerry, Andrea (Author) / Ohri-Vachaspati, Punam (Thesis advisor) / Johnston, Carol (Committee member) / Wharton, Christopher (Christopher Mack), 1977- (Committee member) / Arizona State University (Publisher)
Created2012
Description
The evaluation of nutritional status by dietary intake assessment is fundamental to nutrition research. Accurate assessment allows for health professional-moderated diet adjustment in order to promote disease prevention and management. However, dietary intake can be extremely challenging to measure properly as reliability and accuracy are essential. As technology use has become more prevalent in recent years, an assortment of online, web-based diet analysis methods have begun to emerge. Are these modern methods as accurate as the traditional methods? The aim of this study was to compare and contrast diet analyses from a feeding trial in which both subject-coded (using the Automated Self Administered 24 hour recall, or the ASA24) and investigator-coded (using the Food Processor diet analysis program) diet records were available. Sixty-four overweight (body mass index >27-40 kg/m2) members of a campus community between the ages of 20-45 were recruited for an 8-week parallel arm, randomized controlled trial to evaluate the impact of two different pre-dinner meal snacks on satiety, calories consumed, and contribution to modest weight loss. As part of the study requirements, participants completed 3-day food logs at four different times during the trial: pre-trial, and week 1, 4, and 8. Participants also entered their dietary information into the ASA24 website the day after the intake was recorded by hand. Nutrient intake values were compared between the ASA24 records and the handwritten food logs. All statistical analyses were performed using SPSS Statistical Analysis version 19.0; bivariate analyses and Spearman correlation analyses were utilized. Energy, macronutrient, and micronutrient intakes did correlate significantly between the two methodologies, though both under-reporting and over-reporting were found to exist. Carbohydrate and fiber intakes were under-reported by subjects; retinol, beta-carotene, and vitamin C amounts were over-reported. These results are consistent with previous findings in reporting differences and suggest that the ASA24 is a comparably accurate dietary tracking tool to the traditional diet record method.
ContributorsSchohl, Brooke (Author) / Johnston, Carol (Thesis advisor) / Mayol-Kreiser, Sandra (Committee member) / Wharton, Christopher (Christopher Mack), 1977- (Committee member) / Arizona State University (Publisher)
Created2012
Description
Contamination by chlorinated ethenes is widespread in groundwater aquifers, sediment, and soils worldwide. The overarching objectives of my research were to understand how the bacterial genus Dehalococcoides function optimally to carry out reductive dechlorination of chlorinated ethenes in a mixed microbial community and then apply this knowledge to manage dechlorinating communities in the hydrogen-based membrane biofilm reactor (MBfR). The MBfR is used for the biological reduction of oxidized contaminants in water using hydrogen supplied as the electron donor by diffusion through gas-transfer fibers. First, I characterized a new anaerobic dechlorinating community developed in our laboratory, named DehaloR^2, in terms of chlorinated ethene turnover rates and assessed its microbial community composition. I then carried out an experiment to correlate performance and community structure for trichloroethene (TCE)-fed microbial consortia. Fill-and-draw reactors inoculated with DehaloR^2 demonstrated a direct correlation between microbial community function and structure as the TCE-pulsing rate was increased. An electron-balance analysis predicted the community structure based on measured concentrations of products and constant net yields for each microorganism. The predictions corresponded to trends in the community structure based on pyrosequencing and quantitative PCR up to the highest TCE pulsing rate, where deviations to the trend resulted from stress by the chlorinated ethenes. Next, I optimized a method for simultaneous detection of chlorinated ethenes and ethene at or below the Environmental Protection Agency maximum contaminant levels for groundwater using solid phase microextraction in a gas chromatograph with a flame ionization detector. This method is ideal for monitoring biological reductive dechlorination in groundwater, where ethene is the ultimate end product. The major advantage of this method is that it uses a small sample volume of 1 mL, making it ideally suited for bench-scale feasibility studies, such as the MBfR. Last, I developed a reliable start-up and operation strategy for TCE reduction in the MBfR. Successful operation relied on controlling the pH-increase effects of methanogenesis and homoacetogenesis, along with creating hydrogen limitation during start-up to allow dechlorinators to compete against other microorgansims. Methanogens were additionally minimized during continuous flow operation by a limitation in bicarbonate resulting from strong homoacetogenic activity.
ContributorsZiv-El, Michal (Author) / Rittmann, Bruce E. (Thesis advisor) / Krajmalnik-Brown, Rosa (Thesis advisor) / Halden, Rolf U. (Committee member) / Arizona State University (Publisher)
Created2012
Description
The overall goal of this dissertation is to advance understanding of biofilm reduction of oxidized contaminants in water and wastewater. Chapter 1 introduces the fundamentals of biological reduction of three oxidized contaminants (nitrate, perchlorate, and trichloriethene (TCE)) using two biofilm processes (hydrogen-based membrane biofilm reactors (MBfR) and packed-bed heterotrophic reactors (PBHR)), and it identifies the research objectives. Chapters 2 through 6 focus on nitrate removal using the MBfR and PBHR, while chapters 7 through 10 investigate simultaneous reduction of nitrate and another oxidized compound (perchlorate, sulfate, or TCE) in the MBfR. Chapter 11 summarizes the major findings of this research. Chapters 2 and 3 demonstrate nitrate removal in a groundwater and identify the maximum nitrate loadings using a pilot-scale MBfR and a pilot-scale PBHR, respectively. Chapter 4 compares the MBfR and the PBHR for denitrification of the same nitrate-contaminated groundwater. The comparison includes the maximum nitrate loading, the effluent water quality of the denitrification reactors, and the impact of post-treatment on water quality. Chapter 5 theoretically and experimentally demonstrates that the nitrate biomass-carrier surface loading, rather than the traditionally used empty bed contact time or nitrate volumetric loading, is the primary design parameter for heterotrophic denitrification. Chapter 6 constructs a pH-control model to predict pH, alkalinity, and precipitation potential in heterotrophic or hydrogen-based autotrophic denitrification reactors. Chapter 7 develops and uses steady-state permeation tests and a mathematical model to determine the hydrogen-permeation coefficients of three fibers commonly used in the MBfR. The coefficients are then used as inputs for the three models in Chapters 8-10. Chapter 8 develops a multispecies biofilm model for simultaneous reduction of nitrate and perchlorate in the MBfR. The model quantitatively and systematically explains how operating conditions affect nitrate and perchlorate reduction and biomass distribution via four mechanisms. Chapter 9 modifies the nitrate and perchlorate model into a nitrate and sulfate model and uses it to identify operating conditions corresponding to onset of sulfate reduction. Chapter 10 modifies the nitrate and perchlorate model into a nitrate and TCE model and uses it to investigate how operating conditions affect TCE reduction and accumulation of TCE reduction intermediates.
ContributorsTang, Youneng (Author) / Rittmann, Bruce E. (Thesis advisor) / Westerhoff, Paul (Committee member) / Krajmalnik-Brown, Rosa (Committee member) / Halden, Rolf (Committee member) / Arizona State University (Publisher)
Created2012
Description
Recently a new materials platform consisting of semiconductors grown on GaSb and InAs substrates with lattice constants close to 6.1 A was proposed by our group for various electronic and optoelectronic applications. This materials platform consists of both II-VI (MgZnCdHg)(SeTe) and III-V (InGaAl)(AsSb) compound semiconductors, which have direct bandgaps spanning the entire energy spectrum from far-IR (~0 eV) up to UV (~3.4 eV). The broad range of bandgaps and material properties make it very attractive for a wide range of applications in optoelectronics, such as solar cells, laser diodes, light emitting diodes, and photodetectors. Moreover, this novel materials system potentially offers unlimited degrees of freedom for integration of electronic and optoelectronic devices onto a single substrate while keeping the best possible materials quality with very low densities of misfit dislocations. This capability is not achievable with any other known lattice-matched semiconductors on any available substrate. In the 6.1-A materials system, the semiconductors ZnTe and GaSb are almost perfectly lattice-matched with a lattice mismatch of only 0.13%. Correspondingly, it is expected that high quality ZnTe/GaSb and GaSb/ZnTe heterostructures can be achieved with very few dislocations generated during growth. To fulfill the task, their MBE growth and material properties are carefully investigated. High quality ZnTe layers grown on various III-V substrates and GaSb grown on ZnTe are successfully achieved using MBE. It is also noticed that ZnTe and GaSb have a type-I band-edge alignment with large band offsets (delta_Ec=0.934 eV, delta_Ev=0.6 eV), which provides strong confinement for both electrons and holes. Furthermore, a large difference in refractive index is found between ZnTe and GaSb (2.7 and 3.9, respectively, at 0.7 eV), leading to excellent optical confinement of the guided optical modes in planar semiconductor lasers or distributed Bragg reflectors (DBR) for vertical-cavity surface-emitting lasers. Therefore, GaSb/ZnTe double-heterostructure and ZnTe/GaSb DBR structure are suitable for use in light emitting devices. In this thesis work, experimental demonstration of these structures with excellent structural and optical properties is reported. During the exploration on the properties of various ZnTe heterostructures, it is found that residual tensile strains exist in the thick ZnTe epilayers when they are grown on GaAs, InP, InAs and GaSb substrates. The presence of tensile strains is due to the difference in thermal expansion coefficients between the epilayers and the substrates. The defect densities in these ZnTe layers become lower as the ZnTe layer thickness increases. Growth of high quality GaSb on ZnTe can be achieved using a temperature ramp during growth. The influence of temperature ramps with different ramping rates in the optical properties of GaSb layer is studied, and the samples grown with a temperature ramp from 360 to 470 C at a rate of 33 C/min show the narrowest bound exciton emission peak with a full width at half maximum of 15 meV. ZnTe/GaSb DBR structures show excellent reflectivity properties in the mid-infrared range. A peak reflectance of 99% with a wide stopband of 480 nm centered at 2.5 um is measured from a ZnTe/GaSb DBR sample of only 7 quarter-wavelength pairs.
ContributorsFan, Jin (Author) / Zhang, Yong-Hang (Thesis advisor) / Smith, David (Committee member) / Yu, Hongbin (Committee member) / Menéndez, Jose (Committee member) / Johnson, Shane (Committee member) / Arizona State University (Publisher)
Created2012
Description
Background: Research in animal models suggests that fish oil ingestion may impair immunity and increase risk for infection. To date there are no studies examining this relationship between fish oil ingestion and risk for infection in humans. Objective: The primary aim of this randomized, placebo-controlled, double-blind, parallel-arm study was to examine the effect of 400 mg of EPA and 200 mg of DHA, the main components of fish oil (FO) supplements, on the incidence of symptoms related to upper respiratory tract infections in healthy young females, at a large southwestern university. Design: Healthy young women between 18 and 38 years of age who were non-obese (mean BMI 23.7 ± 0.6 kg/m2) were recruited from an urban southwestern university campus. Subjects were non-vegetarians, non-smokers, and reported consuming less than one serving (3.5 oz) of fish per week. Participants (n=26) were randomized according to age, body weight, BMI, and daily n-3 fatty acid (FA) intake into two groups: FO (one gel capsule of 600 mg EPA/DHA per day) or CO (one placebo gel capsule of 1000 mg coconut oil per day). Participants completed a validated daily cold symptom survey, the Wisconsin Upper Respiratory Symptom Survey-21 for 8 weeks. Fasting blood samples measuring TNF-α concentrations were taken at weeks 1 and 8, when 24-hour dietary recalls were also performed. Anthropometric measurements were recorded via bioelectrical impedance at trial weeks 1, 4, and 8. Results: The 8-week trial of FO supplementation did not significantly change the average score for perception of cold symptoms between FO and CO groups (167 ± 71 and 185 ± 56, p=0.418, respectively). Plasma TNF-α levels (pg/mL) did not differ between groups (p=0.482). TNF-α levels were significantly correlated with body weight (r=0.480, p=0.037), BMI (r=0.481, p=0.037, and percent body fat (r=0.511, p=0.025) at baseline. Conclusions: Healthy young women taking a fish oil supplement of 400 mg EPA and 200 mg DHA per day over 8 weeks does not impose unintentional health consequences. These findings do not refute the American Heart Association's current recommendations for all Americans to consume two servings (3.5 oz) of a variety of oily fish per week. Depending on the type of fish, this current recommendation equates to approximately 200-300 mg per day of EPA and DHA n-3 polyunsaturated fatty acids. Additional research is needed to investigate the effects of higher dosages of fish oils on daily cold symptoms.
ContributorsGutierrez, Megan (Author) / Johnston, Carol (Thesis advisor) / Appel, Christy (Committee member) / Martin, Keith (Committee member) / Arizona State University (Publisher)
Created2013