Matching Items (309)
Description
The storm events of summer 2014 proved to be some of the highest on record for Maricopa County. Flash flooding has been an ongoing issue within Arizona during the monsoon season due to the remnants of hurricanes that result in short, high intensity storms. The proximity of these intense storm events and their corresponding flooding structures is imperative in reducing the impact of these events on the community. The analysis of the maximum precipitation events for Tempe, Scottsdale, Phoenix, Mesa, Chandler, Goodyear, Peoria, Avondale and Glendale during the summer of 2014 proved that there were many events that had a calculated recurrence of 100 years or greater. The storm event with the most precipitation events with a recurrence of 100 years or greater was September 8, 2014. This storm event also produced a streamflow response that had the highest recorded streamflow at gages near the events with a 100 year recurrence. These intervals represent a larger amount of rain during a precipitation event and this correlation suggests that short burst of extreme weather was not a trend in this data. Rather, high storm events occurred over the span of 24 hours. The most frequent response of the stream gage to this rain event was a streamflow event that has a recurrence of 2-5 years. This suggests that the channels and flooding structures used to contain the rain events were effective in reducing the amount of water and therefore effectively managing the flooding response. An analysis of newspaper commentary and an interview with a representative from the Flood Control District of Maricopa County (FCDMC) indicated that there is a disconnect between public perception and the structure of FCDMC. Through this analysis a better understanding of the FCDMC as well as the impact of severe storm events in Maricopa County was found.
ContributorsBrancati, Olivia Anne (Author) / Vivoni, Enrique (Thesis director) / White, Dave (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Accidental wetlands have been created on the bed of the Salt River and are fed by storm-water outfalls discharging at various sections of the Phoenix Metropolitan Area. Water discharges from these outfalls throughout the year, during both dry conditions (base flow) and during rain events (storm flow). In this study, DOC content and composition was studied during these two flow conditions, in the outfalls and along the wetland flow path. The importance of DOC lies in its role in transporting carbon via water movement, between different parts of a landscape, and therefore between pools in the ecosystem. Urbanization has influenced content and composition of DOC entering the accidental urban wetland via outfalls as they represent watersheds from different areas in Phoenix. First, DOC load exhibited higher quantities during stormflow compared to baseflow conditions. Second, DOC load and fluorescence analysis outcomes concluded the outfalls are different from each other. The inputs of water on the north side of the channel represent City of Phoenix watersheds were similar to each other and had high DOC load. The northern outfalls are both different in load and composition from the outfall pipe on the southern bank of the wetland as it represents South Mountain watershed. Fluorescence analysis results also concluded compositional changes occurred along the wetland flow path during both stormflow and baseflow conditions. In this study, it was explored how urbanization and the associated changes in hydrology and geomorphology have affected a desert wetland's carbon content.
ContributorsBone, Stephanie Rosalia (Author) / Hartnett, Hilairy (Thesis director) / Palta, Monica (Committee member) / Mascaro, Giuseppe (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2016-05
Description
Teaching methods in the present day are beginning to transition from the traditional lecture style to the flipped learning style. The flipped classroom, also known as an engaged learning classroom, follows the model where students are presented with lecture material prior to attending class. Instead of being lectured in class, they work on applications of the material with the help of their peers and the instructional staff. One component that many engaged learning environments have in common is lecture videos for the students to view prior to attending class. An undergraduate civil engineering course at Arizona State University is modeled using an engaged learning environment; however, it does not provide lecture videos for the students. Many students in this course are seeing an engaged learning environment for the first time and need guidance on how to prepare for the course, how to approach course material, and how to interpret feedback, in addition to getting help in the technical concepts. This project aims to create supplemental lecture videos based on the concepts that students in the class identified as needing more information, as well as topics that will help students make this transition to an engaged learning environment. A series of sixteen videos were created and posted for the students to view prior to attending recitation periods. The feedback from the students regarding the videos was studied and implementation techniques for future semesters were tested.
ContributorsFlys, Victoria Pilar (Author) / Hjelmstad, Keith (Thesis director) / Baisley, Amie (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2015-12
Description
This paper features analysis of interdisciplinary collaboration, based on the results from the Kolbe A™ Index of students in the Nano Ethics at Play (NEAP) class, a four week course in Spring 2015. The Kolbe A™ is a system which describes the Conative Strengths of each student, or their natural drive and instinct. NEAP utilized the LEGO® SERIOUS PLAY® (LSP) method, which uses abstract LEGO models to describe answers to a proposed question in school or work environments. The models could be described piece by piece to provide clear explanations without allowing disciplinary jargon, which is why the class contained students from eleven different majors (Engineering (Civil, Biomedical, & Electrical), Business (Marketing & Supply Chain Management), Architectural Studies, Sustainability, Anthropology, Communications, Philosophy, & Psychology).
The proposed hypotheses was based on the four different Kolbe A™ strengths, or Action Modes: Fact Finder, Follow Through, Quick Start, and Implementor. Hypotheses were made about class participation and official class twitter use, using #ASUsp, for each Kolbe type. The results proved these hypotheses incorrect, indicating a lack of correlation between Kolbe A™ types and playing. The report also includes qualitative results such as Twitter Keywords and a Sentiment calculation for each week of the course. The class had many positive outcomes, including growth in the ability to collaborate by students, further understanding of how to integrate Twitter use into the classroom, and more knowledge about the effectiveness of LSP.
The proposed hypotheses was based on the four different Kolbe A™ strengths, or Action Modes: Fact Finder, Follow Through, Quick Start, and Implementor. Hypotheses were made about class participation and official class twitter use, using #ASUsp, for each Kolbe type. The results proved these hypotheses incorrect, indicating a lack of correlation between Kolbe A™ types and playing. The report also includes qualitative results such as Twitter Keywords and a Sentiment calculation for each week of the course. The class had many positive outcomes, including growth in the ability to collaborate by students, further understanding of how to integrate Twitter use into the classroom, and more knowledge about the effectiveness of LSP.
ContributorsStevens, Jenna Marie (Author) / Seager, Thomas (Thesis director) / Jenses, Camilla (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Herberger Institute for Design and the Arts (Contributor) / Barrett, The Honors College (Contributor)
Created2015-12
Description
The current EPA regulation for total chromium in drinking water is the MCL standard of 0.1 milligrams per liter or 100 parts per billion (ppb) to avoid dermatological effects. With a toxicology study released in 2008 by the Department of Health and Human Services noting that hexavalent chromium is carcinogenic, the EPA is currently reviewing this MCL standard. During this review, the EPA provides monitoring guidance that requires quarterly sampling of surface water for hexavalent chromium. However, these samples monitor the instant in time that they were taken, and do not account for varying concentrations that are time-dependent. This research seeks to develop a method for monitoring hexavalent chromium in water. Using ion exchange technology, passive samplers were developed and installed at the Chandler Water Treatment Plant for a week-long monitoring event. Results show that passive samplers using ion exchange technology provide an accurate assessment of the average concentration of total chromium within the water treatment plant's effluent with 90.3% recovery of Cr(VI) in SIR-100 resin and 62.6% recovery in SIR-700.
ContributorsLesan, Dylan Scott (Author) / Westerhoff, Paul (Thesis director) / Supowit, Samuel (Committee member) / Bowen, Alexandra (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2014-05
Description
One of the salient challenges of sustainability is the Tragedy of the Commons, where individuals acting independently and rationally deplete a common resource despite their understanding that it is not in the group's long term best interest to do so. Hardin presents this dilemma as nearly intractable and solvable only by drastic, government-mandated social reforms, while Ostrom's empirical work demonstrates that community-scale collaboration can circumvent tragedy without any elaborate outside intervention. Though more optimistic, Ostrom's work provides scant insight into larger-scale dilemmas such as climate change. Consequently, it remains unclear if the sustainable management of global resources is possible without significant government mediation. To investigate, we conducted two game theoretic experiments that challenged students in different countries to collaborate digitally and manage a hypothetical common resource. One experiment involved students attending Arizona State University and the Rochester Institute of Technology in the US and Mountains of the Moon University in Uganda, while the other included students at Arizona State and the Management Development Institute in India. In both experiments, students were randomly assigned to one of three production roles: Luxury, Intermediate, and Subsistence. Students then made individual decisions about how many units of goods they wished to produce up to a set maximum per production class. Luxury players gain the most profit (i.e. grade points) per unit produced, but they also emit the most externalities, or social costs, which directly subtract from the profit of everybody else in the game; Intermediate players produce a medium amount of profit and externalities per unit, and Subsistence players produce a low amount of profit and externalities per unit. Variables influencing and/or inhibiting collaboration were studied using pre- and post-game surveys. This research sought to answer three questions: 1) Are international groups capable of self-organizing in a way that promotes sustainable resource management?, 2) What are the key factors that inhibit or foster collective action among international groups?, and 3) How well do Hardin's theories and Ostrom's empirical models predict the observed behavior of students in the game? The results of gameplay suggest that international cooperation is possible, though likely sub-optimal. Statistical analysis of survey data revealed that heterogeneity and levels of trust significantly influenced game behavior. Specific traits of heterogeneity among students found to be significant were income, education, assigned production role, number of people in one's household, college class, college major, and military service. Additionally, it was found that Ostrom's collective action framework was a better predictor of game outcome than Hardin's theories. Overall, this research lends credence to the plausibility of international cooperation in tragedy of the commons scenarios such as climate change, though much work remains to be done.
ContributorsStanton, Albert Grayson (Author) / Clark, Susan Spierre (Thesis director) / Seager, Thomas (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2014-12
Description
While public transit systems are perceived to produce lower GHG emission intensities per passenger miles traveled (PMT) and per vehicle miles traveled (VMT), there is a limited understanding of emissions per PMT/VMT across cities, or of how emissions may change across modes (light, metro, commuter, and bus) and time (e.g., with changing electricity mixes in the future). In order to better understand the GHG emissions intensity of public transit systems, a comparative emissions assessment was developed utilizing the National Transit Database (NTD) which reports energy use from 1997 to 2012 of rail and bus systems across the US. By determining the GHG emission intensities (per VMT or per PMT) for each mode of transit across multiple years, the modes of transit can be better compared between one another. This comparison can help inform future goals to reduce GHG emissions as well as target reductions from the mode of transit that has the highest emissions. The proposed analysis of the NTD and comparison of modal emission intensities will be used to develop future forecasting that can guide public transit systems towards a sustainable future.
ContributorsCano, Alex (Author) / Chester, Mikhail (Thesis director) / Seager, Thomas (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor) / School of Sustainability (Contributor) / School of Human Evolution and Social Change (Contributor)
Created2014-12
Description
The rising need for water reuse in the Southwest United States has increased awareness of the quality of wastewater. This need is caused by an increased population having basic water needs; inefficient water use, such as overwatering lawns and leaking pipes; and recent drought conditions all over the southwestern US. Reclaimed water is a possible solution. It's used for a variety of non-potable, or non-drinkable, reasons. These uses include: cooling power plants, concrete mixing, artificial lakes, and irrigation for public parks and golf courts. Cooling power plants utilizes roughly 41% of the total water consumed by the United States, which makes it the highest user of water in the US. The attention is turned to optimizing mechanical processes and reducing the amount of water consumed. Wet-recirculating systems reuse cooling water in a second cycle rather than discharging it immediately. Cooling towers are commonly used to expose water to ambient air. As the water evaporates, more water is withdrawn while the rest continues to circulate. These systems have much lower water withdrawals than once-through systems, but have higher water consumption. The cooling towers in wet-recirculating plants and other warm machinery have two major limitations: evaporation of pumped water and scale formation in the components. Cooling towers circulate water, and only draw as it evaporates, which conserves water. The scale formation in the components is due to the hardness of the water. Scale occurs when hard water evaporates and forms solid calcium carbonate. This formation can lead to reduced flow or even clogging in pipes, fouling of components or pipes, and reduced cooling efficiency. Another concern from the public over the use of reclaimed water is the possibility of there being fecal contamination. This fear stems from the stigma associated with drinking water that essentially came from the toilet. An emerging technology, in order to address these three issues, is the use of an electromagnetic device. The wires have a current flowing through which induces a magnetic field perpendicular to the direction of the flow, while the electrical field is proportional to the flow velocity. In other words, the magnetic and electrical fields will create an effect that will concentrate cations at the center of the pipe and anions at the wall of the pipe or the other way depending on the direction of the flow. Reversing the field will then cause the cations and anions to move toward one another and increase the collision frequency and energy. The purpose of these experiments is to test the effects of the electromagnetic device on the aforementioned topics. There are three tests that were performed, a surface tension test, a hardness test, and a microbial test. The surface tension test focused on the angle of a water droplet until it burst. The angle would theoretically decrease as the bond between water molecules increased due to the device. The results of this test shows a lower angle for the treated water but a higher angle for the untreated one. This means the device had an effect on the surface tension of the water. Hard water is caused by calcium and magnesium ions in the water. These ions are dissolved in the water as it travels past soil and rocks. The purpose of this test is to measure the free calcium ion amount in the water. If the free calcium number lowers, then it can be assumed it collided with the carbonate and formed calcium carbonate. This calcium carbonate causes a reduction in hardness in the water. The result of the test showed no correlation between ion concentrations in the treated/untreated system. The e. coli test focused on testing the effects of an electromagnetic device on inhibiting fecal contamination in water/wastewater at a treatment facility. In order to detect fecal contamination, we test for bacteria known as fecal coliforms, more specifically e. coli. The test involved spiking the system with bacteria and testing its concentrations after time had passed.The e. coli results showed no trend in the inactivation of the bacteria. In conclusion, the device had varying results, but multiple steps can be taken in the future in order to continue research.
ContributorsHernandez, Andres Victor (Author) / Fox, Peter (Thesis director) / Abbaszadegan, Morteza (Committee member) / Civil, Environmental and Sustainable Engineering Programs (Contributor) / Barrett, The Honors College (Contributor)
Created2014-12
DescriptionThis project is an Industrial Design concept development using personal research from developing Southeast Asian countries. The scope of the project is from initial conception, research, ideation, computer modeling and rendering.
ContributorsFlorant, Raymond G (Author) / McDermott, Lauren (Thesis director) / Milligan, Jason (Committee member) / Barrett, The Honors College (Contributor) / The Design School (Contributor)
Created2014-05
Description
FLARE is a concept developed to aid efficiency and effectiveness of Search and Rescue. It is a wearable technology device that encompasses GPS capabilities, backup offline locating capabilities, 2-way text communication via satellite, and other various features suited for outdoors. It is intended for both Search and Rescue as well as recreational outdoor enthusiasts, with same hardware, but different software.
ContributorsKawski, Anna Simone (Author) / McDermott, Lauren (Thesis director) / Dhadphale, Tejas (Committee member) / Barrett, The Honors College (Contributor) / School of Sustainability (Contributor) / The Design School (Contributor)
Created2014-05