Automated vehicles are becoming more prevalent in the modern world. Using platoons of automated vehicles can have numerous benefits including increasing the safety of drivers as well as streamlining roadway operations. How individual automated vehicles within a platoon react to each other is essential to creating an efficient method of travel. This paper looks at two individual vehicles forming a platoon and tracks the time headway between the two. Several speed profiles are explored for the following vehicle including a triangular and trapezoidal speed profile. It is discovered that a safety violation occurs during platoon formation where the desired time headway between the vehicles is violated. The aim of this research is to explore if this violation can be eliminated or reduced through utilization of different speed profiles.

Bioluminescent algae has long fascinated humans as a beautiful natural phenomenon. This creative project uses bioluminescent algae to push the limit of biomimicry, using the algae not as a model but as a technology. Through experimentation with algae samples and industrial design, two potential applications of bioluminescent algae as a sustainable lighting technology were generated. One design focuses on indoor, private lighting, while the other focuses on outdoor, public lighting. Both outcomes attempt to solve problems generated by nighttime lighting including light pollution, wasted electricity usage, and negative impacts on human and environmental health while retaining the benefits of safety and convenience.

Enzyme-induced carbonate precipitation (EICP) is a biocementation technique that produces comparatively fewer carbon dioxide emissions than traditional cementation. However, the use of synthetic reagents for EICP is costly, and the process produces an ammonium byproduct which is a harmful pollutant. This study utilizes fresh urine as a source of urea and calcium-rich zeolites as an ammonium adsorbent and a source of calcium ions for the EICP cementation technique. Batch hydrolysis and adsorption experiments were conducted to determine the effects of zeolite type, zeolite form, and solution composition on ammonium adsorption and calcium release. Cementation experiments were then conducted to determine the effects of different hydrolysis and adsorption times on ammonium adsorption and calcium carbonate precipitation. The results showed that calcium-rich chabazite could be used as a source of calcium ions and as an effective adsorbent of ammonium for EICP. Additionally, synthetic, fresh urine and real, fresh urine had comparable ammonium adsorption and calcium release trends. Finally, inclusion of a pre-hydrolysis step reduced the ammonium adsorption and calcium release, but longer adsorption times lead to calcium carbonate precipitation outside of the sand column, which is an undesirable outcome for soil biocementation; even with this limitation, the calcium carbonate content of sand columns ranged from 0.48% to 0.92%, which signifies the potential of the proposed process for cementation, given a higher initial concentration of urea.

According to Dr. Chris Donaghue, Ph.D., LCSW, CST, “There are a good number of psychological benefits associated with incorporating sex toys into relationships and self-pleasure”. This is also widely accepted across the pleasure product and medical industries. Pleasure products like sex toys can positively impact users’ quality of sleep, self esteem, and relationships. While there is a wide variety of pleasure products available on the current market, few of these options are suitable for people with limited range of motion. This inequity within the sex toy industry negatively impacts the wellness of people with limited range of motion. These negative impacts range from lowered self esteem and happiness to greater stress and conflict within sexual relationships both with others and with themselves. This project seeks to provide a meaningful design solution for people with limited range of motion, and provide insight on the design considerations that must be taken within the pleasure product industry to better address the needs of people with limited range of motion.

Is there a mismatch between urban farmers’ perceptions of their farm’s environmental sustainability and its actual environmental impact? Focusing on the use of water and nutrients on each farm as described by the farmers through interviews, it is evident that there is some level of disconnect between ideals and practices. This project may aid in bridging the gap between the two in regard to the farmers’ sustainability goals. This project will move forward by continuing interviews with farmers as well as collecting soil and water from the farms in order to more accurately quantify the sustainability of the farms’ practices. This project demonstrates that there is some degree of misalignment between perception and reality. Two farms claimed they were sustainable when their practices did not reflect that, while 2 farms said they were not sure if they were sustainable when their practices indicated otherwise. Samples from two farms showed high concentrations of nutrients and salts, supporting the idea that there may be a mismatch between perceived and actual sustainability.

Filmmakers seek to create story pieces that are visually beautiful and engage the full attention of their audience. They typically abide by a 3-step process moving through pre-production, production, and post-production. Within each step, there are a series of tasks that need to be accomplished in order to reach the completed film. A successful film requires careful planning and strategy in pre-production, timely and decisive execution in production, and minimal unforeseen retouching in post-production.<br/><br/>Even though filmmakers have continued to follow the same formula throughout the decades, the filmmaking process has remained largely inefficient. It is extremely common for pre-production planning to be undercut, for production filming to run far too long, and for post-production VFX and editing to send the project over budget. These instances can cause major issues as the project is being finalized. In many scenarios portions of the project need to be reshot, the box office revenue isn’t enough to make up for extensive VFX retouching, or the project may never even come to fruition. <br/><br/>The reason for this recurring theme of films being over budget and out of time is quite simply that technology has made filmmakers lazy. “Fix it in post” is a disgustingly common phrase used in the film industry. It describes the utter abuse of computer retouching in the post-production phase of filmmaking. Despite working in an industry that seeks to entertain the human eye, filmmakers have become blind to all of the small mistakes that could cost them hundreds of hours and millions of dollars in the long run.

This study investigated the difference in biofilm growth between pristine polypropylene microplastics and aged polypropylene microplastics. The microplastics were added to Tempe Town Lake water for 4 weeks. Each week the microplastic biofilms were quantified. Comparing the total biofilm counts, the results showed that the aged microplastic biofilms were larger than the pristine each week. By week 3 the aged microplastic counts had almost doubled in size increasing from 324 to 626 Colony Forming Units per gram in just one week. There was a significant difference in the diversity found from week 1 to week 4. About 40% of the diversity for the pristine microplastic biofilm was seen as light-yellow dots and about 60% of these dots were seen on the aged microplastic biofilms in both weeks. As the microplastics were submerged in the lake water, new phenotypes emerged varying from week 1 to week 4 and from pristine to aged microplastic biofilms. Generally, it was found that as the microplastics stay in the environment there is more biofilm on the particles. The aged microplastics have a larger amount of biofouling, and the pristine microplastic biofilms were found to have more diversity of phenotypes.