Matching Items (127)
128796-Thumbnail Image.png
Description

Methicillin resistant Staphylococcus aureus (MRSA) is currently a major cause of skin and soft tissue infections (SSTI) in the United States. Seasonal variation of MRSA infections in hospital settings has been widely observed. However, systematic time-series analysis of incidence data is desirable to understand the seasonality of community acquired (CA)-MRSA

Methicillin resistant Staphylococcus aureus (MRSA) is currently a major cause of skin and soft tissue infections (SSTI) in the United States. Seasonal variation of MRSA infections in hospital settings has been widely observed. However, systematic time-series analysis of incidence data is desirable to understand the seasonality of community acquired (CA)-MRSA infections at the population level. In this paper, using data on monthly SSTI incidence in children aged 0–19 years and enrolled in Medicaid in Maricopa County, Arizona, from January 2005 to December 2008, we carried out time-series and nonlinear regression analysis to determine the periodicity, trend, and peak timing in SSTI incidence in children at different age: 0-4 years, 5-9 years, 10-14 years, and 15-19 years. We also assessed the temporal correlation between SSTI incidence and meteorological variables including average temperature and humidity. Our analysis revealed a strong annual seasonal pattern of SSTI incidence with peak occurring in early September. This pattern was consistent across age groups. Moreover, SSTIs followed a significantly increasing trend over the 4-year study period with annual incidence increasing from 3.36% to 5.55% in our pediatric population of approximately 290,000. We also found a significant correlation between the temporal variation in SSTI incidence and mean temperature and specific humidity. Our findings could have potential implications on prevention and control efforts against CA-MRSA.

Created2013-04-02
128804-Thumbnail Image.png
Description

Background: Prior research shows that work in agriculture and construction/extraction occupations increases the risk of environmental heat-associated death.

Purpose: To assess the risk of environmental heat-associated death by occupation.

Methods: This was a case-control study. Cases were heat-caused and heat-related deaths occurring from May-October during the period 2002–2009 in Maricopa County, Arizona. Controls were selected

Background: Prior research shows that work in agriculture and construction/extraction occupations increases the risk of environmental heat-associated death.

Purpose: To assess the risk of environmental heat-associated death by occupation.

Methods: This was a case-control study. Cases were heat-caused and heat-related deaths occurring from May-October during the period 2002–2009 in Maricopa County, Arizona. Controls were selected at random from non-heat-associated deaths during the same period in Maricopa County. Information on occupation, age, sex, and race-ethnicity was obtained from death certificates. Logistic regression analysis was used to estimate odds ratios for heat-associated death.

Results: There were 444 cases of heat-associated deaths in adults (18+ years) and 925 adult controls. Of heat-associated deaths, 332 (75%) occurred in men; a construction/extraction or agriculture occupation was described on the death certificate in 115 (35%) of these men. In men, the age-adjusted odds ratios for heat-associated death were 2.32 (95% confidence interval 1.55, 3.48) in association with construction/extraction and 3.50 (95% confidence interval 1.94, 6.32) in association with agriculture occupations. The odds ratio for heat-associated death was 10.17 (95% confidence interval 5.38, 19.23) in men with unknown occupation. In women, the age-adjusted odds ratio for heat-associated death was 6.32 (95% confidence interval 1.48, 27.08) in association with unknown occupation. Men age 65 years and older in agriculture occupations were at especially high risk of heat-associated death.

Conclusion: The occurrence of environmental heat-associated death in men in agriculture and construction/extraction occupations in a setting with predictable periods of high summer temperatures presents opportunities for prevention.

ContributorsPetitti, Diana (Author) / Harlan, Sharon (Author) / Chowell-Puente, Gerardo (Author) / Ruddell, Darren (Author) / College of Health Solutions (Contributor)
Created2013-05-29
128701-Thumbnail Image.png
Description

In this study we characterized the relationship between temperature and mortality in central Arizona desert cities that have an extremely hot climate. Relationships between daily maximum apparent temperature (ATmax) and mortality for eight condition-specific causes and all-cause deaths were modeled for all residents and separately for males and females ages

In this study we characterized the relationship between temperature and mortality in central Arizona desert cities that have an extremely hot climate. Relationships between daily maximum apparent temperature (ATmax) and mortality for eight condition-specific causes and all-cause deaths were modeled for all residents and separately for males and females ages <65 and ≥65 during the months May-October for years 2000-2008. The most robust relationship was between ATmax on day of death and mortality from direct exposure to high environmental heat. For this condition-specific cause of death, the heat thresholds in all gender and age groups (ATmax = 90–97 °F; 32.2‒36.1 °C) were below local median seasonal temperatures in the study period (ATmax = 99.5 °F; 37.5 °C). Heat threshold was defined as ATmax at which the mortality ratio begins an exponential upward trend. Thresholds were identified in younger and older females for cardiac disease/stroke mortality (ATmax = 106 and 108 °F; 41.1 and 42.2 °C) with a one-day lag. Thresholds were also identified for mortality from respiratory diseases in older people (ATmax = 109 °F; 42.8 °C) and for all-cause mortality in females (ATmax = 107 °F; 41.7 °C) and males <65 years (ATmax = 102 °F; 38.9 °C). Heat-related mortality in a region that has already made some adaptations to predictable periods of extremely high temperatures suggests that more extensive and targeted heat-adaptation plans for climate change are needed in cities worldwide.

ContributorsHarlan, Sharon (Author) / Chowell-Puente, Gerardo (Author) / Yang, Shuo (Author) / Petitti, Diana (Author) / Morales Butler, Emmanuel (Author) / Ruddell, Benjamin (Author) / Ruddell, Darren M. (Author) / College of Liberal Arts and Sciences (Contributor)
Created2014-03-20
128683-Thumbnail Image.png
Description

Unidirectional glass fiber reinforced polymer (GFRP) is tested at four initial strain rates (25, 50, 100 and 200 s-1) and six temperatures (−25, 0, 25, 50, 75 and 100 °C) on a servo-hydraulic high-rate testing system to investigate any possible effects on their mechanical properties and failure patterns. Meanwhile, for

Unidirectional glass fiber reinforced polymer (GFRP) is tested at four initial strain rates (25, 50, 100 and 200 s-1) and six temperatures (−25, 0, 25, 50, 75 and 100 °C) on a servo-hydraulic high-rate testing system to investigate any possible effects on their mechanical properties and failure patterns. Meanwhile, for the sake of illuminating strain rate and temperature effect mechanisms, glass yarn samples were complementally tested at four different strain rates (40, 80, 120 and 160 s-1) and varying temperatures (25, 50, 75 and 100 °C) utilizing an Instron drop-weight impact system. In addition, quasi-static properties of GFRP and glass yarn are supplemented as references. The stress–strain responses at varying strain rates and elevated temperatures are discussed. A Weibull statistics model is used to quantify the degree of variability in tensile strength and to obtain Weibull parameters for engineering applications.

ContributorsOu, Yunfu (Author) / Zhu, Deju (Author) / Zhang, Huaian (Author) / Huang, Liang (Author) / Yao, Yiming (Author) / Li, Gaosheng (Author) / Mobasher, Barzin (Author) / Ira A. Fulton Schools of Engineering (Contributor)
Created2016-05-19
136040-Thumbnail Image.png
Description
Collaborative research is not only a form of social and human capital and a public good, but also a fundamental elicitor of positive Collective Action. Collaborative Research Networks can serve as models of proactive and purposive Collective Action and catalysts of societal change, if they function as more than hubs

Collaborative research is not only a form of social and human capital and a public good, but also a fundamental elicitor of positive Collective Action. Collaborative Research Networks can serve as models of proactive and purposive Collective Action and catalysts of societal change, if they function as more than hubs of research and knowledge. It is the goal of this Honors Thesis to examine the current nature under which collaborative research networks, focused on matters of Global Health or Sustainability, operate., how they are organized, what type of collaboration they engage in, and who collaborates with whom. A better understanding of these types of networks can lead to the formation of more effective networks that can develop innovative solutions to our collective Global Health and Sustainability problems.
ContributorsHodzic, Mirna (Author) / Van Der Leeuw, Sander (Thesis director) / Janssen, Marco (Committee member) / Schoon, Michael (Committee member) / Barrett, The Honors College (Contributor)
Created2012-05
141495-Thumbnail Image.png
Description

The electronic structure of eight zinc-centered porphyrin macrocyclic molecules are investigated using density functional theory for ground-state properties, time-dependent density functional theory (TDDFT) for excited states, and Franck-Condon (FC) analysis for further characterization of the UV-vis spectrum. Symmetry breaking was utilized to find the lowest energy of the excited states

The electronic structure of eight zinc-centered porphyrin macrocyclic molecules are investigated using density functional theory for ground-state properties, time-dependent density functional theory (TDDFT) for excited states, and Franck-Condon (FC) analysis for further characterization of the UV-vis spectrum. Symmetry breaking was utilized to find the lowest energy of the excited states for many states in the spectra. To confirm the theoretical modeling, the spectroscopic result from zinc phthalocyanine (ZnPc) is used to compare to the TDDFT and FC result. After confirmation of the modeling, five more planar molecules are investigated: zinc tetrabenzoporphyrin (ZnTBP), zinc tetrabenzomonoazaporphyrin (ZnTBMAP), zinc tetrabenzocisdiazaporphyrin (ZnTBcisDAP), zinc tetrabenzotransdiazaporphyrin (ZnTBtransDAP), and zinc tetrabenzotriazaporphyrin (ZnTBTrAP). The two latter molecules are then compared to their phenylated sister molecules: zinc monophenyltetrabenzotriazaporphyrin (ZnMPTBTrAP) and zinc diphenyltetrabenzotransdiazaporphyrin (ZnDPTBtransDAP). The spectroscopic results from the synthesis of ZnMPTBTrAP and ZnDPTBtransDAP are then compared to their theoretical models and non-phenylated pairs. While the Franck-Condon results were not as illuminating for every B-band, the Q-band results were successful in all eight molecules, with a considerable amount of spectral analysis in the range of interest between 300 and 750 nm. The π-π* transitions are evident in the results for all of the Q bands, while satellite vibrations are also visible in the spectra. In particular, this investigation finds that, while ZnPc has a D4h symmetry at ground state, a C4v symmetry is predicted in the excited-state Q band region. The theoretical results for ZnPc found an excitation energy at the Q-band 0-0 transition of 1.88 eV in vacuum, which is in remarkable agreement with published gas-phase spectroscopy, as well as our own results of ZnPc in solution with Tetrahydrofuran that are provided in this paper.

ContributorsTheisen, Rebekah (Author) / Huang, Liang (Author) / Fleetham, Tyler (Author) / Adams, James (Author) / Li, Jian (Author) / Ira A. Fulton Schools of Engineering (Contributor)
Created2015-03-07
131762-Thumbnail Image.png
Description
Objectives: To explore the feasibility and effects of using a meditation mobile app 10-minutes a day for 4-weeks to reduce burnout (primary outcome), improve mindfulness, reduce stress, and depression in physician assistant (PA) students compared to a wait-list control.
Methods: This study was a randomized, wait-list, control trial with assessments

Objectives: To explore the feasibility and effects of using a meditation mobile app 10-minutes a day for 4-weeks to reduce burnout (primary outcome), improve mindfulness, reduce stress, and depression in physician assistant (PA) students compared to a wait-list control.
Methods: This study was a randomized, wait-list, control trial with assessments at baseline and post-intervention (week 4). Participants were asked to meditate using Calm for 10 minutes per day. A p value ≤0.05 was considered statistically significant.
Results: The majority of participants (n=19) stated using Calm helped them cope with the stress of PA school. The intervention group participated in meditation for an average of 76 minutes/week. There were significant differences in all outcomes for the intervention group (all p ≤0.06). There was a significant interaction between group and time factors in emotional exhaustion (p=.016) and depersonalization (p=.025).
Conclusions: Calm is a feasible way to reduce burnout in PA students. Our findings provide information that can be applied to the design of future studies.
ContributorsWorth, Taylor Nicole (Author) / Huberty, Jennifer (Thesis director) / Will, Kristen (Committee member) / Puzia, Megan (Committee member) / College of Health Solutions (Contributor) / Barrett, The Honors College (Contributor)
Created2020-05